HI .. I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet. used the power switch, when I tried to restart I got audible 'beeps' from it.
HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.
Similar Messages
-
I was trying to contact my wife in another country on a trip as I have several times since she has been away. Today we connected and then lost the signal and when I tried her again I got connected to someone in CA. How does that happen??
Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me? How can I fix it?
Hi, clara_from_brazi.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue. Also, test connecting the external storage device to the computer with another cable as this can be the issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Apple Computers and Displays: Powering peripherals through USB
http://support.apple.com/kb/HT4049
Cheers,
Jason H. -
Okay, so I have been having trouble with my mail application all week. The window refused to open and would not quit. Today, I tried to shut down my mac and a pop up window told me that I was unable to shutdown because mail was open. After using a key combination, I successfully was able to quit mail with force quit. Then I was able to shut down with out a problem. However, upon rebooting, my computer refused to let me loggin. I put in my password correctly but then the rainbow pinwheel showed up and stalled for a minute and then my screen flashed and the gray screen reappeared, expecting a password. I tried turning it off and back on again with no luck. I also reset my password after reading a similar discussion, but I still can't log in. How can I fix this?
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)
Avast! Uninstall -
hi i was watching a tv series on my iPad3 thru the app VIKI when it suddenly froze. I tried to turn it off by pressing the sleep/awake and the home button but it would not go.
Try reset a few more times.
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
Any idea what a blank screen with a flashing folder with a question mark inside of it means???
Ambinder55,
it means that the forced shutdown corrupted some portion of the internal disk’s filesystem. Which version of OS X is installed on your MacBook Pro? -
My email frozen, I could not shut down either I could not restart
My email frozen, I could not shut down either I could not restart
See > https://discussions.apple.com/message/23974847#23974847
-
My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion installation?
No, as I have yet to be convinced on Lion.
Did a permissions repair help from the install DVD? -
I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart, something to do with a Panic report?
Thanks
BrianHi mende1,
you asked me to post the Kernal panic report then next time it appears, sorry for the delay but it was fine until yesterday when it happened again so here it is, hope you can make sense of this, thank you for your help.
Regards
Brian
Interval Since Last Panic Report: 97797 sec
Panics Since Last Report: 1
Anonymous UUID: 17D8F909-09A9-4BC6-A153-A12F75529506
Sun Jan 27 09:32:57 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff80002b4b31, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000800a9118, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0xffffff80008c2028, RBX: 0x00000000800a9100, RCX: 0xffffff800ae5bf00, RDX: 0x0000000000000080
RSP: 0xffffff8078713e68, RBP: 0xffffff8078713eb0, RSI: 0x000000005aefd876, RDI: 0x00000000800a9118
R8: 0x0000000000000010, R9: 0x0000000000000000, R10: 0xfffffe802662d000, R11: 0x00080000000263f3
R12: 0xffffff8078713f60, R13: 0xffffff8078713f78, R14: 0x0000000000000000, R15: 0x00000000800a9118
RFL: 0x0000000000010002, RIP: 0xffffff80002b4b31, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000800a9118, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8078713b10 : 0xffffff8000220792
0xffffff8078713b90 : 0xffffff80002c4794
0xffffff8078713d40 : 0xffffff80002da55d
0xffffff8078713d60 : 0xffffff80002b4b31
0xffffff8078713eb0 : 0xffffff80002352a5
0xffffff8078713ec0 : 0xffffff800036489d
0xffffff8078713ee0 : 0xffffff8000345031
0xffffff8078713fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 1750251829240
last loaded kext at 51464252613: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f815c7000, size 57344)
last unloaded kext at 215848970782: com.apple.driver.AppleFileSystemDriver 13 (addr 0xffffff7f825c2000, size 12288)
loaded kexts:
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.apple.filesystems.msdosfs 1.7.1
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.GeForce 7.3.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBOHCI 5.1.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 160.7
com.apple.driver.AppleHIDKeyboard 160.7
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0x24300000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: hub_device, 0x0409 (NEC Corporation), 0x0059, 0x26400000 / 2
USB Device: Tablet, 0x172f, 0x0037, 0x26410000 / 6
USB Device: Mass Storage Device, 0x058f (Alcor Micro, Corp.), 0x6362, 0x26430000 / 5
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x26440000 / 4
USB Device: JumpDrive, 0x05dc (Lexar Media, Inc.), 0xa205, 0x26441000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4 -
hyy i m using ipad and i want to upgrade it to latest os update 8 but when i tried to update it got updated only to 5.1.1 what should i do to get further update??
If your iPad has no front or back cameras, then you have an original iPad 1.
The original iPad 1 cannot be upgraded any further than iOS 5.1.1.
Sorry. -
Hi , My modem got zapped by lightning yesterday. My iMac still was able to power on when I tried it yesterday. Today the modem is replaced and internet is working, but now the computer will not power on. I followed the steps to reset SMC. Nothing. ??
Ouch, not much more you can do, I think you'll have to have it looked at.
-
I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.
Put your phone in DFU mode,
Hold the Power Button (3 secs)
Continue holding the power button and also hold the home button (15 secs)
Release the power button while continuing to hold the home button (10 secs)
Your device should prompt with the "Connect to iTunes Screen"
Restore. -
i used an apple account of a friend to download apps to my iphone, the account then closed, now when i tried to update apps i download it from my account or i buy it using my account, its says that i have to put the password of my friend account, and if i want to update any app i downloaded or buy from my i have to delete it and download it again.
what can i do??As far as I know you should be prompted for the password for an account that 'owns' one of the apps that requires updating.
If all of the apps with updates are linked to your account and that is the account that is now logged in, then you could try a reset and see if that helps : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
Several years ago I had an itunes account through my work email address. I have since let the company but when I tried to access the songs I'd already purchased, my password would not work because that account no longer existed. I ended up having to open another account but how can I access that account to retrieve my other songs? I realize I can't transfer between accounts but maybe at least burn to CD?
Hello, RSchultz13.
Thank you for visiting Apple Support Communities.
You can reset your Apple ID password via the steps in the first article below. I would try the option to answer your security questions. If those steps do not work then you may need to reach out to our account security team to reset this old Apple ID password. Once this is done you should be able to access your old DRM protected purchases.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.
Maybe you are looking for
-
Beta BIOS for RC410M-L / RC410M-FI / RC410M-F (MS-7173, PCB 1.0) ver. V1.3B7 NOTE: That BIOS cannot be used for RC410M2 Series boards. (MS-7173, PCB 2.2) BIOS Sign-on message: RC410M A7173AMS V1.3B7 120406 15:08:44 (Date: 12/05/2006) Attachment name:
-
Monitor HPw2207h only comes on with re-boot goes black and error says no imput, win7 64bit
No changes just started a couple of months ago. when it goes to sleep hitting a key or moving the mouse will not wake it up and it gives me an error "no imout vga,no imput hdmi" and then going to sleep? Omly way to get it back is to reboot!
-
Hello, I've been trying to use the Signal Generator Express VI and DAQ Assistant in order to generate an output waveform, as seen in this NI tutorial video: http://www.ni.com/academic/students/learn-daq/generate/ (timestamp is at 2:07 for what I'm tr
-
I can't get my apps to launch
-
CONDITION TABLE FOR ADDING IN ACCESS SEQUENCE.
Dear I want to create new condition table for tax procedure access sequence. Can somebody tell me the T-code or Path where I can check or Create new condition table which will help in getting the key combination (TAX CODE) in FV11. Thanks, Dhanu