New MovieClips added to existing SWC library not available in Flash Builder

To be as brief as possible with this...
I have 2 swc libraries in my Flash Builder Project. One is in a "Common" project and the other one is in a MobilePlayer project. Obviously the "common" project contains UI assets that apply across the board, while the MobilePlayer version contains assets specific to that version of the application.
Both swc files are in the respective libraries for each project we are referencing. Up until yesterday I could add new MovieClips to the "common.swc" and they would be available across the board instantly.
Sometime yesterday I could not get new MCs added to my "common.swc" to show up in the intellisense, or become avaialble whatsoever.
For troubleshooting I am creating a Square, turning it into a MC symbol, exported for AS with a classname of "Fubar"
whenever I try and create a new instance of :Fubar() to anything anywhere in my applicatioin I get the Call to possibly undefined method Fubar error message. It does not show up in intellisense menus and it is NON EXISTENT.
HOWEVER — Named movieclips within my .swc library I have already been using such as "CompanyLogo()" etc etc are STILL fully available and can be referenced from anywhere in my application. I can add a new CompanyLogo()  anywhere I want with no problem.
As ANOTHER test, I REMOVED the movieclips CompanyLogo (and others) from my Library and re-saved the SWC.
All of a sudden Flash Buider generates a compiler error (undefined method) for each missing referenced MC in the swc file (obviously, because they are no longer there).
However, those named MCs still show up in intellisense menus etc etc.
Basically what I can determine is that Flash Builder is not updating and picking up any changes to this SWC library whenever anything is added or removed from it. At some point it became "locked" in memory (for lack of a better term) and it refuses to recognize that the file has been changed.
When I extract the catalog.xml from the SWC and read through it, I can find nodes for every single NEW mc I've created yet I cannot get them to show up in Flash Builder. I refresh, close and restart Flash Builder and have done everything I can possibly think of to get my updates to register and they refuse.
On the other hand my "mobile.swc" updates just fine as I make changes to it. If I add a new MC to it, it is instantly available. If I take away a MC it FB instantly recognizes that it is gone.
Am I doing something wrong here or am I correct in my assumption that for some reason FB refuses to update the contents of my "common.swc" library into memory?
Any insight would be appreciated as I cannot find a single relevant answer in 3 hours of Google searching.

OK,
Now I see what is really going on. I am trying to reference MCs from my "common.swc" lib which is in a different project, and the reason they are showing up and available is because I used them in MXML files within the "common" project that are called upon and loaded before the mobile specific login screen MXML is loaded.
I just did a quick test to see if the new button I created would be available within the "common" project and it is there, and shows up with intellisense etc etc as expected.
When I add an instance of my new button to a MXML file being loaded before the mobile specific stuff I can then drop it into my mobile specific screens and it shows up.
I either need to figure out how to reference MCs within a swc inside of a different project directly, or just declare them when the application first loads.

Similar Messages

  • HT201303 I have a new ipod added to existing laptop itunes account it is now asking a security question i have not answered help

    I have a new ipod added to existing laptop itunes account it is now asking me a security question I have not answered - can anyone help please ?

    Click here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
    (88450)

  • I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

    I am upgrading from a 2nd gen ipod touch to a 4th gen ipod touch. Will I have problems syncing my new ipod to my existing itunes library/account?

    Don't know why you would.
    You can sync as many ipods/iphones/ipads as you like.

  • Can't get new photos added to existing iPhoto albums to sync with iPhone

    I tried talking about this in the iTunes area, but there was no response:
    https://discussions.apple.com/message/20660036#20660036
    I thought I'd drop by the iPhone discussion area next.
    The problem in a nutshell is that I can't get new photos added to iPhoto albums to sync with my iPhone 5. I can even unselect the albums, sync, see the albums deleted on the iPhone, select the albums again, sync, see the albums recreated - but the recreated albums don't include the photos I added yesterday.
    I don't know if this is an iTunes 11 bug, an iPhoto bug or an iPhone bug.
    Any suggestions?
    Thanks,
    doug

    Yes, but which album will be empty?
    Anyway, as soon as I saw how creating albums locally on the iPhone actually worked I said to myself, "This is not reasonable" and as much as I dislike iPhoto decided to keep doing it there until that feature is improved.
    It seems like an obvious thing to improve. Then the albums can sync between the iPhone, iPhoto and other iOS devices more like "it just works" (which it doesn't do now).
    doug

  • I accidentally synced my new iphone5 as an existing phone and not as a new one. I lost my videos! Can I retrieve them?

    I accidentally synced my new iPhone 5 as an existing phone and not as a new one on my itunes account when registering it. I lost some very special videos I had taken of my son. Can those be retrieved somehow?

    If you had content on your phone before syncing it, then no matter whether you set it up as new or as an existing, you would have lost the data that was on the phone.
    If, when you connected the iPhone to iTunes you ran a backup before restoring from the previous device, your data may have been saved in that backup. You can check in iTunes and see if there is a backup there. Also, the only way to get that back is to restore to that backup. However, make sure you do not backup the phone in the condition is in now, because that will overwrite the backup that is there. Check the date and time of the backup in iTunes and see if it is before you did the setup.

  • How to add a new field in target ODS that is not available in source ODS ?

    Hello every one , this is the first time i am placing a question
    - Currently we have an existing ODS based on 2LIS_02_SCL data source. This ODS is already in production.
    We have a requirement to use this existing ODS as our source to load required data in to two different data targets which also are ODS.Their update rules are different.
    Problem: There is  now a requirement to include a new field (PO need date) in the two target ODS. As this field in not available in our source ODS . How do we go about adding this.
    concern: As the source ODS is already in Production, How do we go about loading data if this new field is added.
    Anticipating your co operation.

    The new field is 0SCL_DELDATE  (planned delivery date of document schedule line)
    It is already there in the comm structure of our source ODS. But as it was not needed earlier in the source ODS, it was not used/added.(i.e not there is the source ODS update rules)
    But now as we are basing our targets on this source ODS.
    How do i go about doing this.
    The main idea of doing it this way is because we do not want to reload data from R/3.

  • Shared iTunes Library not available

    My iTunes library is located in the "Shared" users account and pointed to by a folder alias in my own "Music" folder. However, when setting up a slide show in iPhoto, my iTune tracks are not available. In fact iTunes does not even show up in the Music pane.
    If I create an actual (not an alias) iTunes music folder in ~/Music/ iPhoto works as it should.
    I have tried creating symbolic links at the command line instead of using the "Create Alias" action in Finder. Doing so does not help.
    iTunes works fine. The problem is only in iPhoto.
    iMac 2GHz Intel Core 2 Duo   Mac OS X (10.4.9)  

    As a work around I have been able to start iTunes while holding down the "Option" key and create a new iTune Library in my ~/Music folder. Then I import whatever song I want to use in my slideshow.

  • Aperture library not available as desktop or screensaver option

    Aperture library is not available as desktop or screensaver option. Nor is it available in Fotomagico. Any ideas?

    Go into "System Preferences" -> "Desktop & Screensaver" -> "Desktop"
    Scroll down the list on the left.  The top categories should be the Apple default desktop images that came with Snow Leopard.  Below that you should see iPhoto and it's events, albums, etc.  Below that you should see Aperture with your projects listed below that.
    Do you at least see the projects listed or does Aperture not even appear?  Or is the problem that you aren't able to select any of the images from a project?
    If the latter I'm wondering if you're missing previews.  You might go into "Aperture" -> "Preferences..." and pick the "Previews" category.  Make sure the check boxes are selected for "New projects automatically generate previews" and "Use embedded JPEG from camera when possible" (if your camera shoots in RAW+JPEG mode then it'll use the JPEGs from the camera as the preview instead of building it's own.)
    You can force it to update previews but note that since it normally wants to generate previews automatically the 'Update Preview(s)' isn't a global function... it only rebuilds the previews for images you have selected (which means you have to go into each project, select all images, and do a "Photos" -> "Update Previews"
    Beyond this, you'd probably need to run Aperture first-aid to determine if there is some corruption in the Aperture library preventing it from being used.

  • Attachments in Form Library Not Available?

    Are attachments in the Advanced Settings not available in a Form Library like it is in other Library's? I know I can add the attachment link on an InfoPath form, but I would like it to be on the ribbon as well and as a column for my view.
    I am on SharePoint 2013 On Premise.
    Thanks,
    Justin
    It's me

    Hello Justin,
    kindly check the liknk
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c832e3ba-bc4c-4907-a52b-493775a87567/display-attachment-in-sharepoint-form-library?forum=sharepointdevelopmentprevious
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Pane with audio meters and SFX library not available

    All my panes are showing up in every layout except for the pane with the SFX library and audio meters. I properly removed/re-installed FCS, and the pane is still not available. Any suggestions on how to fix this problem would be greatly appreciated.
    Thanks
    Isaiah Smith

    I can't find it, but try trashing the STP preferences. I assume you've already gone through the menu to try to turn it on.
    Go here for information for trashing preferences.
    http://www.digitalrebellion.com/blog/posts/howto_trashpreferences.html

  • HT4557 Full itunes library not available on ipod touch

    I have shared my itunes library on my laptop but when I access it through my ipod touch not all the songs in my library are available. Does anyone have any idea why this is?
    Thanks

    Try:
    Troubleshooting Home Sharing

  • Help! iPhoto library not available to other Apple applications

    My iPhoto library is not available for browsing in other Apple applications like iMovie, Mail or even Desktop and Screen Saver. I've rebuilt the iPhoto database, fixed permissions, tried to do over starting with a clean plate and importing the database and nothing seems to work. The iPhoto library is unavailable to other Apple applications that can make use of it.
    Any ideas as to how I can fix this problem? FWIW, iTunes is available in other Apple applications and iPhoto seems to work just fine as a stand alone application it just doesn't want to play with the other children anymore.
    Thanks.

    Eric
    Sharing between applicationns is enabled by a file in the iPhoto Library Folder called the Albumdata.xml file.
    First step: Remove this file and restart iPhoto. This will force iPhoto to rebuild the files. Then relaunch the other apps, see if they see can see iPhoto.
    If not, do you have any non-ascii characters in your titles or keywords - bascaly anything that's not 0-9 or a - z.
    If that's not the issue, have a look at this thread
    http://discussions.apple.com/thread.jspa?messageID=3870956
    especially Dave E's discovery about malformed strings in the albumData file.
    Regards
    TD

  • Iphoto library not available as screensaver

    I want my computer to show my pictures from the iPhoto library, as the screensaver. I always had that but now in Mountain Lion the iPhoto library is not available as an option to select. I do have the possibility to select my PhotoBooth picture, but I want my iPhoto Library. Anyone have the same issue and, more importatn, does anyone know how to fix this?

    you can choose to use your iphoto library pics by going into system prefs/desktop & screensaver
    click on screensaver and make sure you choose a screen saver option that uses pictures (such as floating, snapshots, etc)
    now next to source option hit the drop down and your iphoto library should be an option to choose
    once you choose iphoto library it will further give you options to use specific event pics etc.
    the following article also talks about screensavers in mt lion:
    http://support.apple.com/kb/PH3780

  • Iphoto 8.1.1 library not available in IMovieHD

    I am running Leopard on my MacBook Pro and use both IMovie HD and 09. My IPhoto library is not available to me when I am editing in IMovieHD. This is a recent occurrence. I get the message "Open iPhoto 2 or Aperture 1.5 or later to see photos from your iPhoto or Aperture library in this list." I don't have this problem editing in HD on my IMac, which runs Snow Leopard. What can I do? Do I have to upgrade my laptop to Snow Leopard?

    Found it, yes, its in the Picture Folder, but I was looking for another Folder with all the pictures and notice a file called iphoto library, its not a folder but when I right click and show package, I saw a folder called orginal with all the pictures. 
    Thats what I was looking for..
    Hope this help other people...

  • Apps in library not available for syncing

    I've searched and searched but can't seem to figure out this problem. 
    There are some apps in my iTunes library that I had purchased on my iPad and I want to put them on my son's iPod touch.  But when I plug in his device those apps don't appear on the sync list for his device.  No matter what I do I can't seem to get those apps on the list, which means I can't get them on his iPod.  How do I solve this problem?

    I see all my smart albums in iTunes when I sync the iPad. But sometimes iTunes is confused about the current library. I have several iPhoto and Aperture Libryries, and I noticed that iTunes sometimes still tries to sync the previously opened library, not the most recently opened one. To be able to tell which library iTunes is showing, I name one of the projects exactly like the library. So I can tell easily, if iTunes is syncing an older copy of the library.
    For example a small test library named "iPhoto Library" containing one smart album:
    Regards
    Léonie

Maybe you are looking for

  • Can't connect to iDisk via AirPort Extreme

    I can't connect to iDisk if I have an Extreme in my network path. Connection that will work: Motorola cable modem -> Netgear Hub -> iMac -> iDisk or Motorola cable modem -> iMac -> iDisk Connection that doesn't work: Motorla Cable modem -> Airport Ex

  • Exchange Rate date for Invoice posting for Slovak Republic

    Hi, We have a requirement wherein for Slovak Republic, Invoice should pick up ( at the time of Invoice Posting) the exchange rate from the Delivery Note date and not the Invoice Posting Date. This is applicable for all vendors which have a Slovak Rep

  • How to get IDoc Metadata and Structure without connection to sender

    Hello folks! Is there any chance to receive and process an IDoc with PI without having loaded the IDoc Metadata with a direct connection from the sending SAP System? Can't this be done by hand? Or is it not possible to bypass the IDoc Adapter and sen

  • Frustration with Safari pdf plugins

    I've tried both Shubert and Adobe Reader PDF plugins and find they are both terrible. What I find most annoying is that I can't seem to accurately control scolling. The slightist slide of my finger seems to send the document jumping, often pages at a

  • How are attachments handled when submitting a form

    If a user attaches a file to a PDF form, can the attachment be submitted to a database or spreadsheet? Does the attachment need to be extracted from each form individually?