New Open Source Broadcom WIFI driver, where to start?

Hello I want to install new Broadcom Open Source driver brcm80211 for my Broadcom BCM43225 WIFI card but I'm kinda confused where to start. First of all this driver is not available in Arch repositories nor AUR, so I guess there's only GIT way in which I'm not too much familiar. At the moment only Debian has this driver available in it's backports kernel but that is useless for Arch Linux user, except for the firmware loading instructions. So please help me, I have exported the whole 500MB+ git "next staging" tree, and now I would like to figure it out how to compile brcm80211 module and eventually use it with Arch kernel. Thanks in advance.
Last edited by Riot777 (2010-09-28 23:00:45)

I spent close to an hour shortly after it was added to the staging-next branch and managed to compile it against 2.6.35.4 (not sure about the .4 part however). Unfortunately, it wasn't especially stable and got some kernel oops on suspend. After that, I went back to using the wl module.
Recent changes don't look like they could have improved the stability of the driver by much, so I'd advise against using it for now.
With the above said, if you're feeling adventurous you can build the driver as follows:
0. Make sure you have the `base-devel' group installed, along with `kernel26-headers' (preferably version 2.6.35.6-2 as 2.6.35.6-1 had some issues) and `linux-firmware' 20100911-1 (the one in [core] doesn't contain the firmware files for brcm80211 AFAIK).
1. Grab just the brcm80211 directory from the staging-next branch by clicking the `snapshot' link on this page.
2. Extract the compressed tarball and then open a terminal inside the staging-next-2.6-x directory that gets created.
3. Change the Makefile a little by running `curl -s http://ompldr.org/vNW82NA/Makefile.patch | patch -Np0'. After that, run `make'.
4. Now, you should have the compiled module `brcm80211.ko' in the current directory, which you can copy into `/lib/modules/2.6.35-ARCH/updates/'. (Create the updates directory if it doesn't exist.)
I didn't test the above steps thoroughly and I'm not certain this is the correct way to build the driver. However, I believe it'll get you a working kernel module.

Similar Messages

Black screen on resume from sleep using open source AMD/ATI driver

When waking from sleep using systemctl suspend or pm-suspend , I am presented with a black screen. I can still open programs, type, etc. but cannot see what I am doing. I usually just wind up rebooting from whatever terminal I had open, but again I can't see what I am typing. Upon reboot, the screen starts back up again. Everything else seems to resume from sleep just fine, it's just the screen that won't turn back on.
I came from Ubuntu and had this same problem there. However, I only had this problem when using the open source xf86-video driver; when using the proprietary drivers, I was able to suspend/resume just fine. So it seems this problem is specific to the open source drivers.
If I'm using an external monitor, my external monitor will resume just fine after waking from sleep, but the laptop screen will not.
Googling around shows this is a common problem with AMD/ATI cards, and after a lot of attempts and failures I'm interested in knowing if anyone else has solved this problem.
What I've tried so far (without success):
-various quirks included with pm-utils to turn on dpms after resume
-xrandr after resumption from sleep
==xrandr --output LVDS --off (If used without suspending (so while the screen still works) this seems to crash Gnome the first time around, but Gnome automatically restarts. If used a second time, it completely blanks the screen and requires a reboot)
==xrandr --output LVDS --mode 1600x900
-xset dpms force on or xset dpms force off after resumption from sleep
-vbetool dpms off and vbetool dpms on results in error message "Real mode call failed"
-scripts using vbetool or xrandr when resuming from sleep
-switching between virtual consoles and gnome using alt-ctrl-fn-f1 and alt-ctrl-fn-f2 keys
My setup:
-HP Envy dv7
-UEFI dual-boot with Windows 8
-AMD Radeon HD 7640G
-xf86-video-ati 1:7.2.0-1 driver
-Gnome DE using GDM login manager
Thank you.
EDIT: I did try using the proprietary drivers for a time, but found I couldn't adjust my brightness. At first I thought working suspension > adjustable brightness, but I quickly changed my mind after one night of trying to work on an unadjustable maximally bright screen.
Last edited by broahmed (2013-11-23 02:18:57)

Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
John

New Open Source Project - Java, Struts, EJB

There is a new open source project called Centraview. This is an open source CRM/SFA application which can provide a business a full view of their enterprise from lead generation, sales, contact management, project management and integrate into accounting. The development has been going on for more than a year now and they've now taking this open source, so there is alot of opportunity for Java developers to get involved with project that really takes advantage of Java technology. The system is built on the Struts framework and utilizes JBoss as the EJB container, the back-end database is MySQL although there is some initiatives to look at DB abstraction. Anyway here's the link:
http://sourceforge.net/projects/centraview/
Anyway I decided after examining Centraview, that we're not going to be building our own, but using Centraview and it's nice to know we can take part in development and understand the inner workings, so we never limit ourselves.

Presumably you mean GUI and not web.
I have used AutoIt to drive GUI window applications.
[http://www.autoitscript.com/autoit3/]
Seemed pretty easy when I used it. It had a recorder.
On windows I believe you can also use "script host" and the newer powershell but I have used those.
You could also look at the java Robot class or whatever it is called.

New open-source build tool for CS Extensions

I just released a new open-source tool for creating, compiling, debugging, packaging, and deploying extensions:
https://github.com/creativemarket/csxs
At a Glance:
All project settings live in a single JSON file (not multiple XML files).
Compiles CS5 & CS6 versions and packages them as a single ZXP. This is useful for supporting "DarkNormal" and "DarkHover" icons without ditching CS5 compatibility on your extension. It also supports other / more complicated configurations.
Created projects contain boilerplate for re-skinning on UI change along with fixes for platform bugs.
Generates aggregated changelogs.
Automated deploys to S3.
Automated git version tagging.
Conditional compilation variables (CONFIG::debug, CONFIG::release, CONFIG::version).
Usage:
csxs create
csxs debug --cs-product=photoshop --cs-version=5.5
csxs package
csxs deploy
I'd love feedback, suggestions, forks, bug reports, etc!
p.s. I really hope this doesn't come across as spammy—I mean it with the best intentions. I think it could be useful for some out there. More tools for the CS ecosystem is a win for all.
"We encourage you to contribute content, answer questions, or comment with corrections, clarifications, tips, and more. Links to your favorite resources or expert videos could help other community members."
http://forums.adobe.com/docs/DOC-2325

Great tool, thanks a lot for sharing it.
Installed it and built "Hello, world" extension, now trying to convert my existing extension project for this. Packaging CS5 / CS6 versions alone is priceless.
Maybe a dumb question, but is it possible to switch .json and output name in command line? I have extension with 5 different versions, they have different licenses etc., so it would be great to type
csxs package config1.json extension1.zxp
csxs package config2.json extension2.zxp
and so on? I'd put it all into one .sh script
sorry if it's all already available and I just missed this part in documentation

ANN: Ajax4jsf . New Open Source project that brings AJAX capability to JSF

I would like to inform everybody about the new Open Source project - Ajax4jsf. It is hosted on java.net
URL: https://ajax4jsf.dev.java.net/
Ajax4jsf is a rich component framework that has been created exclusively to bring rich user interface functionality to the JavaServer Faces. It enables page-wide AJAX support instead of the traditional component-wide. It means you can define the event on the page that invoke AJAX request and area(s) of the page that should be synchronized with the JSF Component Tree after the AJAX request changes the data on the server according to the events fired on the client.
Actually, ajax4jsf is based on the framework, Alexander Smirnov introduced last summer ( http://smirnov.org.ru/en/ajax-jsf.html ) . He is an architect for ajax4jsf right now.
In addition to the features the previous version of his framework had, we already added the following:
* Framework for support easy change "look and feel" ( skinning )
* Support for handle off-page resources ( JavaScript, CSS styles, images, objects). Resources can be placed in application classpath ( for example, put in JAR), generated by program ( for example, paint images by Java2D or JAI ), with full caching support
* Templating system for easy creating components renderers ( using jsp-like xml template instead of direct call write...() methods )
* Special JTidy-based response filter - it can correct any HTML code from components to avoid incompatibilities with DHTML
Sergey : https://ajax4jsf.dev.java.net/

You can find (simple) samples here:
[https://javaserverfaces.dev.java.net/servlets/ProjectDocumentList?folderID=4036&expandFolder=4036&folderID=0]
[http://www.coreservlets.com/JSF-Tutorial/]
You can find a HTML/rich text editor as JSF component in the Mojarra Scales component library: [https://scales.dev.java.net/htmlEditor.html].

DBAShell - New Open Source Project for Oracle DBA's

I'd like to have this project included in the Open Source Oracle tools list at: http://www.oracle.com/technology/community/opensource_projects.html
I've been an Oracle DBA for quite some time (since 7.0.13) and a developer for many years. One of the things I've always wished for was an easier way to set up environment variables for different Oracle Homes and a way to provide passwords to scripts without embedding them in plain-view.
About 3 years ago, I started a set of functions and scripts at my company that did exactly just that and provided many more functions for things like checking database status, running scripts quietly unless errors are detected, running actions in parallel (like fast shutdowns at once, or multiple analyzes), restarting databases in a guaranteed fashion, aliases to common folder locations, etc..
About a month ago, after putting all this time and effort into these scripts and using them in production all this time, I realized I wanted more out of the scripts like support for other databases and thought that it would be best if I gave it new life as an Open Source project.
So that is how http://sourceforge.net/projects/dbashell/ was started. Now its in a second release (DBAShell 0.85) that is more modular and would allow other people to easily add support for other OSs, other Shells, and other Databases.
Here is a description of the project from the latest news item:
DBAShell is a project based around Shell functions and scripts designed to make it easy for DBA's to use Databases in a command line environment. Currently supported is Oracle with ksh and bash on AIX, Solaris, Linux. The code base itself is 3 years old and has been in use in Production environments all of that time.
Features include:
* Automatic setting of all environment variables based on SID requested.
* Manage PATH's and other path like variables for each ORACLE_HOME needed.
* Run scripts with stored passwords (no more hard-coding of passwords!!)
* Automatically set SID based on Script location (makes it easier to share scripts between SID's)
* manage temporary script output and check for oracle errors in output
* check database status and versions from scripts
* stop/start databases in parallel (faster startup)
* compile all database objects
* analyze objects in parallel (Faster analyzes)
* set aliases and variables for common SID areas, etc..
* many helpful commands for common Oracle tasks
Over a thousand people have already downloaded the prior release and more are downloading every hour.
I'm seeking feedback from anybody that would be willing to take a look at the project, trying it out, give me any feedback you have on it, and perhaps even direct me to where I could best promote this project.
I wrote a tutorial that shows at a glance some of the more useful features of DBAShell:
http://sourceforge.net/docman/display_doc.php?docid=34041&group_id=170224
Main site:
http://sourceforge.net/projects/dbashell/
Documentation: http://sourceforge.net/docman/display_doc.php?docid=33704&group_id=170224
Download:
http://prdownloads.sourceforge.net/dbashell/dbashell-0.85.tar.gz?download

Always glad to have people thinking about the poor DBA's. Usually, the developers get most of the attention in open source.

Yoga 13: any chance for open source Synaptics touchpad driver or touchpad API?

The Yoga is my 1st Windows machine in years. Coming from various MacBook(s) Pro(s) I dearly miss the capabilities and configurability of Apple's multitouch touchpad. While responsibility of the Synaptics device is fairly decent I haven't found an experience that is anything close to the one perceived on the MacBook touchpad. Latter in combination with BetterTouchTool is my weapon of choice when it comes to productivity. It offers almost unlimited configurability, that is, I can design/configure any gesture I desire and link it to a keystroke for instance. It's just perfect since I am not into Apple's predefined gesture settings at all.
Now I have spent endless hours in getting this back on my new Yoga. At least I am now able to use 3 finger swipes for back/forward navigation. However, this is just a fraction of what I need/want. That's why I am looking for a way to either be able to modify the driver myself (open source, Lenovo/Synaptics?) or get access to an API I can build on. Obviously I'd prefer latter option. Synaptics is touting their Gesture Suite but I cannot find a download somewhere. I'm afraid it's OEM only. And if that's the config app that comes with the standard Synaptics driver it's just pathetic.
So does anyone have a clue on how we can significantly improve the performance of this otherwise very nice laptop?
Thanks in advance,
stfn

just wanted to say that I open-sourced the work I completed on the project:
https://github.com/jadware/betterfinger
Most of the hard work is done, but there is plenty of labor remaining..

[SOLVED] error compiling from source Broadcom BCM70015 driver

Hi,
This is my first post.
I have one HP Thin Client T5740 with Intel Atom 1.66 MHz, 1Gb RAM and Broadcom BCM70015 decoder card installed on it.
I have install the last version of archlinux on T5740 and this working very well.
Now, I want compile from source Broadcom BCM70015 but result this error when compiling libcrystalhd:
==> Continue building libcrystalhd-git ? [Y/n]
==> ------------------------------------------
==>
==> Building and installing package
==> ERROR: Missing package() function in /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/./PKGBUILD
==> ERROR: Makepkg was unable to build libcrystalhd-git.
==> Restart building libcrystalhd-git ? [y/N]
==> -----------------------------------------
==>
Where is the problem
Please help me. Thanks
Last edited by Eugen1968 (2015-02-08 22:53:17)

Thank you, for help.
This is the full output :
[eugen@HP-T5740 ~]$ yaourt crystalhd
1 aur/crystalhd-firmware 20120110-2 (3)
Crystal HD Video Decoder firmware
2 aur/crystalhd-git 20130503-1 (10)
Broadcom CrystalHD kernel module
3 aur/crystalhd-snapshot 3.8.0-2 (0)
Broadcom CrystalHD kernel module & library, tagged releases from Google Code SVN tree
4 aur/gst-plugin-crystalhd-git 20120115-1 (4)
Broadcom Crystal HD GST Plugin (Totem for instance) from git.wilsonet.com
5 aur/libcrystalhd 20100703-3 (2)
Broadcom Crystal HD library
6 aur/libcrystalhd-git 20130503-2 (13)
Broadcom CrystalHD library
==> Enter n of packages to be installed (ex: 1 2 3 or 1-3)
==> --------------------------------------------------------
==> 2
==> Downloading crystalhd-git PKGBUILD from AUR...
bsdtar: Failed to set default locale
x PKGBUILD
x devinitFix.patch
x crystalhd-git.install
Comment by rhon (2013-04-20 12:58)
Have you installed kernel headers ?
Comment by rhon (2013-05-03 12:08)
Patch is now included in package.
Comment by binaryjay (2013-08-07 11:47)
Is there a reason that after all of this time this is still only available in AUR, why isn't this module available in the package repository?
Comment by rhon (2013-08-22 04:46)
I guess it's because the package doesn't get enough votes.
Comment by rhon (2013-09-26 20:36)
Package is now orphan because I don't use the devices anymore, so I can't test the module.
crystalhd-git 20130503-1 (Thu Feb 4 13:38:05 UTC 2010)
This package is orphaned
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> y
Please add $EDITOR to your environment variables
for example:
export EDITOR="vim" (in ~/.bashrc)
(replace vim with your favorite editor)
==> Edit PKGBUILD with: nano
==> crystalhd-git dependencies:
- linux>=3.0 (already installed)
- autoconf (already installed)
- make (already installed)
- libcrystalhd-git (building from AUR)
- linux-headers>=3.0 (package found)
- git (package found)
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> y
==> crystalhd-git dependencies:
- linux>=3.0 (already installed)
- autoconf (already installed)
- make (already installed)
- libcrystalhd-git (building from AUR)
- linux-headers>=3.0 (package found)
- git (package found)
==> Edit crystalhd-git.install ? [Y/n] ("A" to abort)
==> -------------------------------------------------
==> y
==> Continue building crystalhd-git ? [Y/n]
==> ---------------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for crystalhd-git:
resolving dependencies...
looking for conflicting packages...
Packages (3) perl-error-0.17022-1 git-2.2.2-1 linux-headers-3.18.4-1
Total Download Size: 10.26 MiB
Total Installed Size: 57.07 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
linux-headers-3.18.4-1-i686 6.1 MiB 377K/s 00:17 [###########################################] 100%
perl-error-0.17022-1-any 18.3 KiB 0.00B/s 00:00 [###########################################] 100%
git-2.2.2-1-i686 4.1 MiB 538K/s 00:08 [###########################################] 100%
(3/3) checking keys in keyring [###########################################] 100%
(3/3) checking package integrity [###########################################] 100%
(3/3) loading package files [###########################################] 100%
(3/3) checking for file conflicts [###########################################] 100%
(3/3) checking available disk space [###########################################] 100%
(1/3) installing linux-headers [###########################################] 100%
(2/3) installing perl-error [###########################################] 100%
(3/3) installing git [###########################################] 100%
Optional dependencies for git
tk: gitk and git gui
perl-libwww: git svn
perl-term-readkey: git svn
perl-mime-tools: git send-email
perl-net-smtp-ssl: git send-email TLS support
perl-authen-sasl: git send-email TLS support
python2: various helper scripts
subversion: git svn
cvsps2: git cvsimport
gnome-keyring: GNOME keyring credential helper
==> Downloading libcrystalhd-git PKGBUILD from AUR...
bsdtar: Failed to set default locale
x crystalhd-3cb6786-fix_typo.patch
x crystalhd-3cb6786-crosscompiling-0.1.patch
x crystalhd-3cb6786-lower_THRESHOLD_globals.patch
x crystalhd-3cb6786-use_8_DMA_buffers.patch
x PKGBUILD
Comment by rudolf (2012-11-21 11:49)
I'm orphaning the crystalhd-git and libcrystalhd-git, because I don't have the hardware anymore.
Comment by rhon (2013-04-03 21:12)
Updated with patches from Openelec (https://github.com/OpenELEC/OpenELEC.tv/tree/master/packages/multimedia/crystalhd/patches)
Comment by rhon (2013-05-03 12:21)
Instead of fetching patches from github, there are now in the package.
Comment by rhon (2013-09-26 20:36)
Package is now orphan because I don't use the devices anymore, so I can't test the module.
Comment by Eugen1968 (2015-01-25 10:58)
I want compile from source Broadcom BCM70015 but result this error when compiling libcrystalhd:
== Continue building libcrystalhd-git ? [Y/n]
== ------------------------------------------
==
== Building and installing package
== ERROR: Missing package() function in /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/./PKGBUILD
== ERROR: Makepkg was unable to build libcrystalhd-git.
== Restart building libcrystalhd-git ? [y/N]
== -----------------------------------------
==
libcrystalhd-git 20130503-2 (Thu Feb 4 13:38:37 UTC 2010)
This package is orphaned
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> y
==> libcrystalhd-git dependencies:
- gcc-libs (already installed)
- git (already installed)
- make (already installed)
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> y
==> libcrystalhd-git dependencies:
- gcc-libs (already installed)
- git (already installed)
- make (already installed)
==> Continue building libcrystalhd-git ? [Y/n]
==> ------------------------------------------
==>
==> Building and installing package
==> Making package: libcrystalhd-git 20130503-2 (Sun Feb 1 14:04:15 UTC 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found crystalhd-3cb6786-crosscompiling-0.1.patch
-> Found crystalhd-3cb6786-fix_typo.patch
-> Found crystalhd-3cb6786-lower_THRESHOLD_globals.patch
-> Found crystalhd-3cb6786-use_8_DMA_buffers.patch
==> Validating source files with md5sums...
crystalhd-3cb6786-crosscompiling-0.1.patch ... Passed
crystalhd-3cb6786-fix_typo.patch ... Passed
crystalhd-3cb6786-lower_THRESHOLD_globals.patch ... Passed
crystalhd-3cb6786-use_8_DMA_buffers.patch ... Passed
==> Extracting sources...
==> Entering fakeroot environment...
==> Starting package()...
==> Connecting to the GIT server....
Cloning into 'crystalhd'...
remote: Counting objects: 2006, done.
remote: Compressing objects: 100% (385/385), done.
remote: Total 2006 (delta 1351), reused 2006 (delta 1351)
Receiving objects: 100% (2006/2006), 3.55 MiB | 347.00 KiB/s, done.
Resolving deltas: 100% (1351/1351), done.
Checking connectivity... done.
patching file linux_lib/libcrystalhd/Makefile
patching file linux_lib/libcrystalhd/libcrystalhd_fwdiag_if.cpp
patching file linux_lib/libcrystalhd/libcrystalhd_priv.h
patching file include/bc_dts_glob_lnx.h
OBJFILES = libcrystalhd_if.o libcrystalhd_int_if.o libcrystalhd_fwcmds.o libcrystalhd_priv.o libcrystalhd_fwdiag_if.o libcrystalhd_fwload_if.o libcrystalhd_parser.o
SRCFILES = libcrystalhd_if.cpp libcrystalhd_int_if.cpp libcrystalhd_fwcmds.cpp libcrystalhd_priv.cpp libcrystalhd_fwdiag_if.cpp libcrystalhd_fwload_if.cpp libcrystalhd_parser.cpp
LNM = libcrystalhd.so.3.6 libcrystalhd.so.3
g++ -march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -c -o libcrystalhd_if.o libcrystalhd_if.cpp
g++ -march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -c -o libcrystalhd_int_if.o libcrystalhd_int_if.cpp
libcrystalhd_int_if.cpp: In function 'BC_STATUS DtsDevMemRd(HANDLE, uint32_t*, uint32_t, uint32_t)':
libcrystalhd_int_if.cpp:741:15: warning: variable 'IOcCode' set but not used [-Wunused-but-set-variable]
uint32_t IOcCode,size_in_dword;
^
libcrystalhd_int_if.cpp: In function 'BC_STATUS DtsDevMemWr(HANDLE, uint32_t*, uint32_t, uint32_t)':
libcrystalhd_int_if.cpp:879:10: warning: passing NULL to non-pointer argument 8 of 'BOOL DtsDrvIoctl(HANDLE, DWORD, LPVOID, DWORD, LPVOID, DWORD, LPDWORD, BOOL)' [-Wconversion-null]
NULL))
^
libcrystalhd_int_if.cpp:824:15: warning: variable 'IOcCode' set but not used [-Wunused-but-set-variable]
uint32_t IOcCode,size_in_dword;
^
libcrystalhd_int_if.cpp: In function 'BC_STATUS DtsCopyRawDataToOutBuff(DTS_LIB_CONTEXT*, BC_DTS_PROC_OUT*, BC_DTS_PROC_OUT*)':
libcrystalhd_int_if.cpp:1218:33: warning: variable 'srcHeightInPixels' set but not used [-Wunused-but-set-variable]
uint32_t srcWidthInPixels = 0, srcHeightInPixels;
^
libcrystalhd_int_if.cpp: In function 'BC_STATUS DtsCopyNV12ToYV12(DTS_LIB_CONTEXT*, BC_DTS_PROC_OUT*, BC_DTS_PROC_OUT*)':
libcrystalhd_int_if.cpp:1283:29: warning: variable 'srcHeightInPixels' set but not used [-Wunused-but-set-variable]
uint32_t srcWidthInPixels, srcHeightInPixels;
^
libcrystalhd_int_if.cpp: In function 'BC_STATUS DtsCopyNV12(DTS_LIB_CONTEXT*, BC_DTS_PROC_OUT*, BC_DTS_PROC_OUT*)':
libcrystalhd_int_if.cpp:1366:31: warning: variable 'srcHeightInPixels' set but not used [-Wunused-but-set-variable]
uint32_t srcWidthInPixels=0, srcHeightInPixels;
^
libcrystalhd_int_if.cpp: At global scope:
libcrystalhd_int_if.cpp:1472:18: warning: 'BC_STATUS DtsCopy422ToYV12(uint8_t*, uint8_t*, const uint8_t*, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t)' defined but not used [-Wunused-function]
static BC_STATUS DtsCopy422ToYV12(uint8_t *dstY, uint8_t *dstUV, const uint8_t *srcY, uint32_t srcWidth, uint32_t dstWidth, uint32_t height, uint32_t strideY, uint32_t strideUV)
^
libcrystalhd_int_if.cpp:1675:18: warning: 'BC_STATUS DtsCopy420ToYV12(uint8_t*, uint8_t*, const uint8_t*, const uint8_t*, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t)' defined but not used [-Wunused-function]
static BC_STATUS DtsCopy420ToYV12(uint8_t *dstY, uint8_t *dstUV, const uint8_t *srcY, const uint8_t *srcUV, uint32_t srcWidth, uint32_t dstWidth, uint32_t height, uint32_t strideY, uint32_t strideUV)
^
g++ -march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -c -o libcrystalhd_fwcmds.o libcrystalhd_fwcmds.cpp
g++ -march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -c -o libcrystalhd_priv.o libcrystalhd_priv.cpp
g++ -march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -c -o libcrystalhd_fwdiag_if.o libcrystalhd_fwdiag_if.cpp
g++ -march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -c -o libcrystalhd_fwload_if.o libcrystalhd_fwload_if.cpp
g++ -march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -c -o libcrystalhd_parser.o libcrystalhd_parser.cpp
libcrystalhd_parser.cpp: In function 'BC_STATUS DtsAddH264SCode(HANDLE, uint8_t**, uint32_t*, uint64_t*)':
libcrystalhd_parser.cpp:542:11: warning: variable 'pNALU' set but not used [-Wunused-but-set-variable]
uint8_t *pNALU = NULL;
^
libcrystalhd_parser.cpp:543:11: warning: variable 'ulNalSize' set but not used [-Wunused-but-set-variable]
uint32_t ulNalSize = 0;
^
g++ -D__LINUX_USER__ -I./ -I../../include -I../../include/link -O2 -Wall -fPIC -shared -fstrict-aliasing -msse2 -Wl,-soname,libcrystalhd.so.3 -pthread -o libcrystalhd.so.3.6 libcrystalhd_if.o libcrystalhd_int_if.o libcrystalhd_fwcmds.o libcrystalhd_priv.o libcrystalhd_fwdiag_if.o libcrystalhd_fwload_if.o libcrystalhd_parser.o
ln -sf libcrystalhd.so.3.6 libcrystalhd.so
ln -sf libcrystalhd.so.3.6 libcrystalhd.so.3
mkdir -p /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/lib
mkdir -p /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/lib/firmware
mkdir -p /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd
cp libcrystalhd_if.h /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/
chmod 0644 /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/libcrystalhd_if.h
cp ../../include/bc_dts_defs.h /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/
chmod 0644 /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/bc_dts_defs.h
cp ../../include/bc_dts_types.h /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/
chmod 0644 /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/bc_dts_types.h
cp ../../include/libcrystalhd_version.h /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/
chmod 0644 /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/include/libcrystalhd/libcrystalhd_version.h
cp ../../firmware/fwbin/70012/bcm70012fw.bin /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/lib/firmware/
chmod 0644 /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/lib/firmware/bcm70012fw.bin
cp ../../firmware/fwbin/70015/bcm70015fw.bin /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/lib/firmware/
chmod 0644 /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/lib/firmware/bcm70015fw.bin
install -m 755 libcrystalhd.so.3.6 /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/lib
(cd /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/lib; ln -sf libcrystalhd.so.3.6 libcrystalhd.so)
(cd /tmp/yaourt-tmp-eugen/aur-libcrystalhd-git/pkg/libcrystalhd-git/usr/lib; ln -sf libcrystalhd.so.3.6 libcrystalhd.so.3)
==> Tidying install...
-> Purging unwanted files...
-> Removing libtool files...
-> Removing static library files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package "libcrystalhd-git"...
-> Generating .PKGINFO file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: libcrystalhd-git 20130503-2 (Sun Feb 1 14:04:45 UTC 2015)
==> Continue installing libcrystalhd-git ? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ---------------------------------------------------
==> y
loading packages...
resolving dependencies...
looking for conflicting packages...
Packages (1) libcrystalhd-git-20130503-2
Total Installed Size: 3.67 MiB
:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring [###########################################] 100%
(1/1) checking package integrity [###########################################] 100%
(1/1) loading package files [###########################################] 100%
(1/1) checking for file conflicts [###########################################] 100%
(1/1) checking available disk space [###########################################] 100%
(1/1) installing libcrystalhd-git [###########################################] 100%
==> Making package: crystalhd-git 20130503-1 (Sun Feb 1 14:04:59 UTC 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found devinitFix.patch
==> Validating source files with md5sums...
devinitFix.patch ... Passed
==> Extracting sources...
==> Entering fakeroot environment...
==> Starting package()...
==> Connecting to the GIT server....
Cloning into 'crystalhd'...
remote: Counting objects: 2006, done.
remote: Compressing objects: 100% (385/385), done.
remote: Total 2006 (delta 1351), reused 2006 (delta 1351)
Receiving objects: 100% (2006/2006), 3.55 MiB | 616.00 KiB/s, done.
Resolving deltas: 100% (1351/1351), done.
Checking connectivity... done.
patching file driver/linux/crystalhd_cmds.c
patching file driver/linux/crystalhd_lnx.c
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not using Libtool
autoreconf: running: /usr/bin/autoconf --force
autoreconf: configure.ac: not using Autoheader
autoreconf: configure.ac: not using Automake
autoreconf: Leaving directory `.'
checking for ld... ld
configure: creating ./config.status
config.status: creating ./Makefile
make -C /lib/modules/3.18.4-1-ARCH/build SUBDIRS=/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux modules
make[1]: Entering directory '/usr/lib/modules/3.18.4-1-ARCH/build'
test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \
echo >&2; \
echo >&2 " ERROR: Kernel configuration is invalid."; \
echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\
echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo >&2 ; \
/bin/false)
mkdir -p /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_versions ; rm -f /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_versions/*
make -f ./scripts/Makefile.build obj=/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd_lnx.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd_lnx)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_crystalhd_lnx.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_lnx.c
if [ "-pg" = "-pg" ]; then if [ /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_lnx.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_lnx.o"; fi; fi;
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd_misc.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd_misc)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_crystalhd_misc.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_misc.c
if [ "-pg" = "-pg" ]; then if [ /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_misc.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_misc.o"; fi; fi;
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd_cmds.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd_cmds)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_crystalhd_cmds.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_cmds.c
if [ "-pg" = "-pg" ]; then if [ /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_cmds.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_cmds.o"; fi; fi;
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd_hw.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd_hw)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_crystalhd_hw.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_hw.c
if [ "-pg" = "-pg" ]; then if [ /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_hw.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_hw.o"; fi; fi;
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd_linkfuncs.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd_linkfuncs)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_crystalhd_linkfuncs.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_linkfuncs.c
if [ "-pg" = "-pg" ]; then if [ /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_linkfuncs.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_linkfuncs.o"; fi; fi;
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd_fleafuncs.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd_fleafuncs)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_crystalhd_fleafuncs.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_fleafuncs.c
/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_fleafuncs.c: In function 'crystalhd_flea_set_power_state':
/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_fleafuncs.c:619:14: warning: 'regVal' may be used uninitialized in this function [-Wmaybe-uninitialized]
if(!(regVal & BCHP_DDR23_CTL_REGS_0_CTL_STATUS_idle_MASK))
^
/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_fleafuncs.c:566:11: note: 'regVal' was declared here
uint32_t regVal;
^
if [ "-pg" = "-pg" ]; then if [ /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_fleafuncs.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_fleafuncs.o"; fi; fi;
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd_flea_ddr.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd_flea_ddr)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_crystalhd_flea_ddr.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_flea_ddr.c
if [ "-pg" = "-pg" ]; then if [ /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_flea_ddr.o != "scripts/mod/empty.o" ]; then ./scripts/recordmcount "/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_flea_ddr.o"; fi; fi;
ld -m elf_i386 -r -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_lnx.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_misc.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_cmds.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_hw.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_linkfuncs.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_fleafuncs.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd_flea_ddr.o ; scripts/mod/modpost /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o
WARNING: /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o(.init.text+0x292): Section mismatch in reference from the function chd_dec_pci_probe() to the function .exit.text:chd_pci_release_mem()
The function __init chd_dec_pci_probe() references
a function __exit chd_pci_release_mem().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
chd_pci_release_mem() so it may be used outside an exit section.
WARNING: /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o(.init.text+0x47a): Section mismatch in reference from the function chd_dec_pci_probe() to the function .exit.text:chd_dec_release_chdev()
The function __init chd_dec_pci_probe() references
a function __exit chd_dec_release_chdev().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
chd_dec_release_chdev() so it may be used outside an exit section.
WARNING: /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o(.data+0x10): Section mismatch in reference from the variable bc_chd_driver to the function .init.text:chd_dec_pci_probe()
The variable bc_chd_driver references
the function __init chd_dec_pci_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
(cat /dev/null; echo kernel//tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.ko;) > /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/modules.order
make -f ./scripts/Makefile.modpost
find /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.tmp_versions -name '*.mod' | xargs -r grep -h '\.ko$' | sort -u | sed 's/\.ko$/.o/' | scripts/mod/modpost -m -i ./Module.symvers -I /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/Module.symvers -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/Module.symvers -w -s -T -
WARNING: /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o(.init.text+0x292): Section mismatch in reference from the function chd_dec_pci_probe() to the function .exit.text:chd_pci_release_mem()
The function __init chd_dec_pci_probe() references
a function __exit chd_pci_release_mem().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
chd_pci_release_mem() so it may be used outside an exit section.
WARNING: /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o(.init.text+0x47a): Section mismatch in reference from the function chd_dec_pci_probe() to the function .exit.text:chd_dec_release_chdev()
The function __init chd_dec_pci_probe() references
a function __exit chd_dec_release_chdev().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
chd_dec_release_chdev() so it may be used outside an exit section.
WARNING: /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o(.data+0x10): Section mismatch in reference from the variable bc_chd_driver to the function .init.text:chd_dec_pci_probe()
The variable bc_chd_driver references
the function __init chd_dec_pci_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
gcc -Wp,-MD,/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/.crystalhd.mod.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.9.2/include -I./arch/x86/include -Iarch/x86/include/generated -Iinclude -I./arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I./include/uapi -Iinclude/generated/uapi -include ./include/linux/kconfig.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -m32 -msoft-float -mregparm=3 -freg-struct-return -fno-pic -mpreferred-stack-boundary=2 -march=i686 -mtune=generic -maccumulate-outgoing-args -Wa,-mtune=generic32 -ffreestanding -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -fno-inline-functions-called-once -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -DCC_HAVE_ASM_GOTO -D__KERNEL__ -DMODULE -I/lib/modules/3.18.4-1-ARCH/build/include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/link -I/tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/../../include/flea -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(crystalhd.mod)" -D"KBUILD_MODNAME=KBUILD_STR(crystalhd)" -DMODULE -c -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.mod.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.mod.c
ld -r -m elf_i386 -T ./scripts/module-common.lds --build-id -o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.ko /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.o /tmp/yaourt-tmp-eugen/aur-crystalhd-git/src/crystalhd/driver/linux/crystalhd.mod.o
make[1]: Leaving directory '/usr/lib/modules/3.18.4-1-ARCH/build'
==> Tidying install...
-> Purging unwanted files...
-> Removing libtool files...
-> Removing static library files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package "crystalhd-git"...
-> Generating .PKGINFO file...
-> Adding install file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: crystalhd-git 20130503-1 (Sun Feb 1 14:05:44 UTC 2015)
==> Continue installing crystalhd-git ? [Y/n]
==> [v]iew package contents [c]heck package with namcap
==> ---------------------------------------------------
==> y
loading packages...
resolving dependencies...
looking for conflicting packages...
Packages (1) crystalhd-git-20130503-1
Total Installed Size: 0.10 MiB
:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring [###########################################] 100%
(1/1) checking package integrity [###########################################] 100%
(1/1) loading package files [###########################################] 100%
(1/1) checking for file conflicts [###########################################] 100%
error: failed to commit transaction (conflicting files)
crystalhd-git: /lib exists in filesystem
Errors occurred, no packages were upgraded.
==> WARNING: Your packages are saved in /tmp/yaourt-tmp-eugen

Are the Flex Ant tasks open source? If so, where to find them?

I took a brief look into Flex SDK source and didn't see the Flex Ant tasks. Is this also open source? Where would I find it?
I probably won't change anything, just want to take a look. Although, I'm annoyed that the tasks don't work in a similar fashion as the core ant tasks
Thanks.

http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/modules/antTasks
Note that the way the tasks are put together ain't exactly pretty--they're just a very thin wrapper on mxmlc / compc / etc. There are some advantages to this approach, but if you're hoping to learn about the compiler options by looking at the task source, it could take some doing.

New open source webmail available

This morning AtMail has released a new version, an open source version. This is a true open source project and will be a great improvement over the existing horde and squirrel mail packages. The interface is based off of their existing simple ajax interface and has been under development in the corporate arena for a couple of years now. You can find the full details on the AtMail Blog (http://blog.atmail.com).

Great tool, thanks a lot for sharing it.
Installed it and built "Hello, world" extension, now trying to convert my existing extension project for this. Packaging CS5 / CS6 versions alone is priceless.
Maybe a dumb question, but is it possible to switch .json and output name in command line? I have extension with 5 different versions, they have different licenses etc., so it would be great to type
csxs package config1.json extension1.zxp
csxs package config2.json extension2.zxp
and so on? I'd put it all into one .sh script
sorry if it's all already available and I just missed this part in documentation

New, open source JavaFX OSGI framework

First, a disclaimer: this is an open source project I started, and somebody may regard it as advertising (basically, it is ). I'm not sure if it's against forum rules. If so, please delete this thread.
Basically, it's a framework for developing modular applications based on OSGI. It should provide support for building applications for desktop, web and mobile devices. It's called DEMUX Framework. Published under Apache License.
http://demux.vektorsoft.com
So far, support is available for desktop applications based on JavaFX, and mobile apps for Android. Since this is JavaFX forum, I would like some feedback from people who work with JavaFX. Basically, is this something you would find useful and worth spending time developing?
If you have some time to throw away, give it a try. Please note that this is early stage development, so you will probably get frustrated and annoyed, buty ou should get the general idea.
Documentation and some code samples are available on project wiki: http://demux.vektorsoft.com/wiki
Source code for samples is available as part of binary download: https://bitbucket.org/vektorsoft/demux/downloads
Any feedback is welcome.

hi,
here's a thought stop spamming this forum with your crap....
A warning to others ignore any links this guy offers, 4/5 of his links so far are connected to spyware.
David.

New Job as a Dialer Administrator "where to start?"

Hi Everyone,
I just got a new job and it looking more like I have to lear about ICM Scripting, cvp with xml, etc... Anyone know where to start to get training on something like this? specif Books, specif courses (online / offline), I know there is just an overwelming amount of information that is out there, but don't know what I am looking for to get a firm knowlege about icm scripting and cvp etc. Any help wouild be most greatful.
Thanks Everyone.
Buddy

Hi 2wicky,
Welcome to Windows Forms.
The link below might be useful to you:
#Your First Game - XNA Game Studio in 2D
https://msdn.microsoft.com/en-us/library/bb203893.aspx?f=255&MSPPError=-2147217396
In addition, since this forum is discussing about the windows forms designer and the winform controls, and if you have any issue about xna or XBOX, I would recommend you go to the link below for help.
http://xboxforums.create.msdn.com/forums/
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

TP10 problem with Broadcom wifi driver

I have problem with the Broadcom 802.11 wireless connection card. Device manager said the driver of the wireless card can not start (error code 10) and the bcmfn2 said that waiting another device (code 51). Initially thought that a software problem. Meanwhile I tried all drivers, system recovery, reinstallation, reset, etc. The problem is constant and begin to think that it is a hardware problem. I installed 1.37 bios and still the problem exist. Anyone with this problem or solvation?

I followed this to get mine working.
Cheers
Paul-S

I am new in portal development . From where to start

Hello !
I am new in portal development .
i have installed 8i db on Linux and 9iAS on win2k . Now i want
to start developent through oracle portal .
For that purpose i have downloaded PDK .
Now what to do .
I am still unable to find the platform where i have to start
development .
Can somebody tell me which steps are required to start
development.
i am more interested doing development in pl/sql.
Where i have to type the code .
Where i have to execute it.
Where and how to run it.
Can somebody tell me with small example .
Regards

Seemab,
I feel your pain. After having been at this for a couple of
months, here's what I have to offer you.
0) Watch every single one of the portal tutorials on this
website. They are little movies and slide shows with tutorials
and actual application walkthroughs that were EXTREMELY HELPFUL
to me and my team in the absence of formalized training. They
were really great.
1) Take a few days and read every single white paper that you
can about Oracle 9iAS Portal and its architecture.
2) Use the portal interface to create groups and users.
3) Experiment with as many aspects of the portal interface that
you can. This will help you see the strengths and limitations
of portal, and where you may need to focus your development
effort.
4) Create database objects like tables by using the portal
interface. Create an LOV off of one of the tables, and use it
in a form. This is all just general stuff that helped
familiarize me with portal.
5) Publish different kinds of documents to the portal.
6) Create a PL/SQL item in a portal. Educate yourself on the
HTP and HTF procedures and functions to print things to the
screen dynamically.
7) Most important of all, download as many pieces of sample
code as you can and install it to portal. On this website you
will find numerous instances of sample portlets and
applications. You will learn what it takes to install Java-
based providers, servlets, and others.
8) Using a good PL/SQL tool like SQL*Navigator or TOAD, browse
your way through the PORTAL30 data dictionary, going through all
of the tables and especially the packages. This will help you
learn where you need to write code to interact with the
underlying objects in Portal.
I'm sorry I can't be more specific than that, but you can really
be on your way to becoming a well-rounded portal developer by
experimenting with these things that I have listed.
Good luck!
Sincerely,
Adrian Klingel
Exaweb

New Ipod Touch- don't know where to start

I have been using an older ipod for years and have several thousand song/pictures in it (and itunes)... I just got a new touch model and want to know if I can just plug it in to my computer and download from my current itunes... if not, what do I do... I hope I don't have to go through the process of downloading all my discs again!
Thanks for help!

Hello JMD6496,
And welcome to Apple Discussions!
Yes. Simply hook up your new iPod and sync away. There is no limit to the number of iPods you can sync with one iTunes library, account, or computer.
B-rock

New Open Source Broadcom WIFI driver, where to start?

Similar Messages

Maybe you are looking for