New R12 install: Apps ORACLE_HOME connection test has returned an error:
Hi guys,
New to R12 apps. Installing 2node R12 on linux 5R9. Database installed fine. Called rapidwiz from node 2 and used conf_PROD.txt i moved from database sever. Failing however with error with Database Availability red exclaimed and every other box red x'd except ODBC and environment file in green at post install check. Where do i start troubleshooting my issue please. thanks.
-Richard.
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 4
LOGS:
/d02/oracle/PROD/inst/apps/PROD_ovm2/admin/log/ohclone.log
Executing command sh -c "/d02/oracle/PROD/apps/tech_st/10.1.2/opmn/bin/opmnctl stopall ; echo ERRORCODE = $? ERRORCODE_END" Sun Mar 03 08:02:50 CST 2013
Command returned
opmnctl: opmn is not running
ERRORCODE = 0 ERRORCODE_END
.end std out.
/d02/oracle/PROD/apps/tech_st/10.1.2/opmn/bin/opmnctl: line 636: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/opmn/bin/opmn: No such file or directory
.end err out.
Command sh -c "/d02/oracle/PROD/apps/tech_st/10.1.2/opmn/bin/opmnctl stopall ; echo ERRORCODE = $? ERRORCODE_END" completed successfully. Sun Mar 03 08:02:51 CST 2013
OPMN shutdown successfull
deleting ojmisc file (copied earlier) at /d02/oracle/PROD/apps/tech_st/10.1.2/jdk/jre/lib/ext/ojmisc.jar
ApplyAppsTechStack_03030802.log
adlnktools.sh started at Sun Mar 3 08:02:51 CST 2013
Log file located at /d02/oracle/PROD/inst/apps/PROD_ovm2/logs/ora/10.1.2/install/make_03030802.log
/d02/oracle/PROD/apps/tech_st/10.1.2/bin/OracleAS_Relink_Patch.sh: line 10: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/install/oracle_relink_patch.log: No such file or directory
/d02/oracle/PROD/apps/tech_st/10.1.2/bin/OracleAS_Relink_Patch.sh: line 11: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/install/oracle_relink_patch.out: No such file or directory
/d02/oracle/PROD/apps/tech_st/10.1.2/bin/OracleAS_Relink_Patch.sh: line 23: /d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/install/oracle_relink_patch.log: No such file or directory
Error while running adlnktools.sh.
return code = .16.17.18.21.22.23.24.25.32.33.34.36.37.38
Please check logfile located at /d02/oracle/PROD/inst/apps/PROD_ovm2/logs/ora/10.1.2/install/make_03030802.log
/d02/oracle/PROD/inst/apps/PROD_ovm2/logs/ora/10.1.2/install/make_03030802.log
0.1.2/jdk/jre/lib/i386/client:/d2/R12/ab/apps/R1211XB9/apps/tech_st/10.1.2/jdk/jre/lib/i386 -Wl,--allow-shlib-undefined `cat /d02/oracle/PROD/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm
/usr/bin/ld: cannot find -ljava
collect2: ld returned 1 exit status
make: *** [d02/oracle/PROD/apps/tech_st/10.1.2/sysman/lib/libnmefsql.so] Error 1
Failed linking target libnmefsql on Sun Mar 3 08:02:56 CST 2013...
/usr/bin/ld: cannot find -ljava
collect2: ld returned 1 exit status
make: *** [d02/oracle/PROD/apps/tech_st/10.1.2/sysman/lib/emagtm] Error 1
Error found while relinking
return code = .16.17.18.21.22.23.24.25.32.33.34.36.37.38
ApplyApplTop_03030824.log
Skipping prodsetup driver processing; driver file not found at: /media/sf_allshare/stage/startCD/Disk1/rapidwiz//apps/driver/ovm2_prodsetup.drv
ApplyApplTop Completed Successfully.
Edited by: 991478 on Mar 3, 2013 10:28 AM
I fear that my issue is somehow related to missing rpms....i see this in the make log for 10.1.2 home
/usr/bin/ld: cannot find -ljava
collect2: ld returned 1 exit status
make: *** [d02/oracle/PROD/apps/tech_st/10.1.2/sysman/lib/libnmefvr.so] Error 1
Failed linking target libnmefvr on Tue Mar 5 10:59:47 CST 2013...
My rpms look as though i have them all. C anything i might be missing still please?
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-libgcc
compat-libgcc-296-2.96.138 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-libstdc++
compat-libstdc++-296-2.96.138 (i386)
compat-libstdc++-33-3.2.3.61 (i386)
compat-libstdc++-33-3.2.3.61 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-libgcc
compat-libgcc-296-2.96.138 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat-gcc
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep gcc
gcc-c++-4.1.2.54.el5 (x86_64)
compat-libgcc-296-2.96.138 (i386)
libgcc-4.1.2.54.el5 (i386)
gcc-4.1.2.54.el5 (x86_64)
gcc-4.1.2.54.el5 (i386)
libgcc-4.1.2.54.el5 (x86_64)
gcc-c++-4.1.2.54.el5 (i386)
gcc-gfortran-4.1.2.54.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep glibc
glibc-common-2.5.107 (x86_64)
glibc-common-2.5.107 (i386)
glibc-devel-2.5.107 (x86_64)
glibc-devel-2.5.107 (i386)
glibc-2.5.107 (x86_64)
glibc-2.5.107 (i686)
glibc-headers-2.5.107 (x86_64)
glibc-headers-2.5.107 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep oracle
oracle-validated-1.1.0.17.el5 (x86_64)
oracle-linux-5.0.0.9.el5 (noarch)
oracle-logos-4.9.17.10 (noarch)
oraclelinux-release-5.9.0.2 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep oracle-validated
oracle-validated-1.1.0.17.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libc
glibc-common-2.5.107 (x86_64)
glibc-common-2.5.107 (i386)
libcap-1.10.26 (x86_64)
libcap-devel-1.10.26 (x86_64)
glibc-devel-2.5.107 (x86_64)
libcap-devel-1.10.26 (i386)
glibc-devel-2.5.107 (i386)
glibc-2.5.107 (x86_64)
libcroco-0.6.1.2.1 (x86_64)
glibc-2.5.107 (i686)
libcap-1.10.26 (i386)
libcroco-devel-0.6.1.2.1 (x86_64)
glibc-headers-2.5.107 (x86_64)
libcroco-0.6.1.2.1 (i386)
glibc-headers-2.5.107 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libgomp
libgomp-4.4.7.1.el5 (x86_64)
libgomp-4.4.7.1.el5 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libXp
libXpm-3.5.5.3 (x86_64)
libXpm-3.5.5.3 (i386)
libXp-1.0.0.8.1.el5 (i386)
libXp-1.0.0.8.1.el5 (x86_64)
libXpm-devel-3.5.5.3 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep make
automake16-1.6.3.8.el5.1 (noarch)
automake-1.9.6.2.3.el5 (noarch)
make-3.81.3.el5 (x86_64)
automake14-1.4p6.13.el5.1 (noarch)
imake-1.0.2.3 (x86_64)
automake15-1.5.16.el5.2 (noarch)
automake17-1.7.9.7.el5.2 (noarch)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep compat
java-1.4.2-gcj-compat-1.4.2.0.40jpp.115 (x86_64)
compat-libgcc-296-2.96.138 (i386)
compat-libstdc++-296-2.96.138 (i386)
avahi-compat-libdns_sd-0.6.16.10.el5_6 (x86_64)
compat-libstdc++-33-3.2.3.61 (i386)
xorg-x11-libs-compat-6.8.2.1.EL.33.0.1 (i386)
compat-libstdc++-33-3.2.3.61 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep unix
unixODBC-libs-2.2.11.10.el5 (x86_64)
unixODBC-libs-2.2.11.10.el5 (i386)
unixODBC-devel-2.2.11.10.el5 (x86_64)
unix2dos-2.2.26.2.3.el5 (x86_64)
dos2unix-3.1.27.2.el5 (x86_64)
unixODBC-2.2.11.10.el5 (i386)
unixODBC-2.2.11.10.el5 (x86_64)
unixODBC-devel-2.2.11.10.el5 (i386)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep libaio
libaio-devel-0.3.106.5 (i386)
libaio-0.3.106.5 (x86_64)
libaio-0.3.106.5 (i386)
libaio-devel-0.3.106.5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep elf
elfutils-libelf-0.137.3.el5 (x86_64)
elfutils-libs-0.137.3.el5 (x86_64)
elfutils-0.137.3.el5 (x86_64)
elfutils-libelf-0.137.3.el5 (i386)
elfutils-libelf-devel-static-0.137.3.el5 (x86_64)
elfutils-libelf-devel-0.137.3.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep gdbm
gdbm-1.8.0.28.el5 (i386)
gdbm-devel-1.8.0.28.el5 (i386)
gdbm-1.8.0.28.el5 (x86_64)
gdbm-devel-1.8.0.28.el5 (x86_64)
[root@ovm2 ~]# rpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})\n" |grep sysstat
Only missing rpm is see is binutils i386. There is the 86x64. Installing that now.....and will re install APPSSTACK.
Verions chosen is binutils-2.17.50.0.6-9.0.1.el5.i386.rpm and presnt is it 86X64.
Edited by: 991478 on Mar 5, 2013 9:59 AM
Similar Messages
-
Can the new pre installed apps in iPad 2. Like garage band, iMovie be sync back to i tune, and then sync these new apps from ipad2 to the old iPad 1?
GB and iMovie pre installed?
http://www.apple.com/ipad/built-in-apps/
Click: Browser All Built In Apps
iMovie and GB must be purchased.
If you have installed GB and iMovie on the iPad 1 and synced using iTunes, just sync the those apps to the newer iPad with iTunes. No re purchase necessary with the same iTunes account. -
Hello. Apple hardware test has detected an error. 4SNS/1/40000001:TN1D--1.000
Hello. Apple hardware test has detected an error. 4SNS/1/40000001:TN1D--1.000 Anyone knows what that means ? OS doesn't boot. Maybe it's hard disk error ?
It means your screwed if you're out of warranty.
That error translates to your northbridge temperature sensor is bad- BUT IN MAC "GENIUS" LAND, that means you either need a whole new logic board (a $700 part) or buy a new MacBook. On the non-unibody MacBook pros, you could have came to my store and spend $75 and had a working computer the same day- this is no longer possible on the unibody MacBooks.
WHY, WHY, WHY?
In a bold design move, Apple decided to SOLDER the thermal sensors to the logic board (along with many other components such as the video, graphics and IO), thus rendering these parts NON-SERVICEABLE by us independant technicians. Apple's reasoning is that they can "make their notebooks thinner", but why sacrifice performace for asthetics? Who cares, buy a new MacBook.
WHO NEEDS TEMPERATURE SENSORS?
It doesn't matter if your laptop is running hot or not, when a temperature sensor goes bad on a Mac, it shuts your computer down to prevent further damage. Apple was the first company to implement this "failsafe", now PC motherboard vendors are following suit after watching Apple's stock soar. What this means: Is that you could actually have a perfectly functioning MacBook except for one thing; the little guy who's sole purpose is to report whether it's not the computer is running hot or not has decided to not show up for work, so they closed up shop. If you ask me, it's the equivalent of a restaraunt closing on account of not having a dishwasher- but that's just the opinion of an ex-certified ACMT and what do I know- I'm not a "genius" or anything. -
(error: ctdevcon.dll has returned an error. mixer will now exi
<SPAN>
<IMG height= alt="" src="http://forums.creative.com/i/p.gif" width= border=0>
Hi!SB Li've Value would not install with XP, tried the original CD tried the download from CReati've Website etc... but could never get Creative mixer and creative Recorder to work. Finally after trying a slew of things with the help of CT Support I pulled out my Card and sent the specs in and was directed to buy a new CD which supports XP.
Finally got it and the install went perfect.
Then started Creative recorder and it was also working perfect.
However when I try to start Creative Surround Mixer I get (error: <B>ctdevcon.dll</B> has returned an error. mixer will now exit).
Does anyone know how to get by this error?.
Here is the diagnostics:Hardware Test Result03/03/2005 08:22:44PM Hardware Detection Test PassSoftware Test Result02/07/2005 08:22:44PM Wave Driver Test Pass02/07/2005 08:22:45PM MIDI Driver Test Pass02/07/2005 08:22:45PM Mixer Driver Test Fail02/07/2005 08:22:46PM DirectSound Test Pass02/07/2005 08:22:46PM DirectSound3D Test Pass02/07/2005 08:22:47PM SoundFont Setting Test Fail02/07/2005 08:22:47PM Mixer Settings Check FailHey all, I have the same problem as everyone else Stupid ctdevcon.dll wont let my mixer work!
I got the Li'veDrvUni-Pack(ENG).exe and stuff started working again, but it also lagged the crap
out of my 2.4ghz p4 with 52ddr, to the point where mp3s were distorting (slowing down,
stretching) if i listened to em while doing ANYTHING else. Heck, even just sittin here running winamp
the mp3s would stretch and distort like the card was having a problem streaming the thing from
my HD.. It had never done that till i got the "newest drivers" in that pack... so i had windows run a
search for the newest drivers in its database.. it finds them, installs them and my sound is fixed.
its perfect again... problem is, now the mixer and recorder dont work again! Like many of the others
here I use WinXP and the card is a SB: Li've! 5..
Message Edited by biclops on 02-04-2006 :08 PM -
M500 Issues with locking up (A TCG Command has returned an error)
Here's the issue, I have researched this A TCG Command has returned an error problem and it seems it's all related to bitlocker problems and or sleep issues, I have all power saving features off, I do "not" have bit locker enabled or running.The problem lies when doing anything that requires hard drive usage other than simple browsing, it can range from 10x in 5 mins on a game and require force reboots and thats the exact error message in the event viewer at the time of crash everytime, I have crashed hundreds of times, and it's getting to the point to where my SSD isn't even fun to own currently, if any of you guru's on here could help that'd be great. Oh and secure boot is turned off (also read about that) It does it with it on or off, doesn't matter. And I had this problem with the default firmware (m03) and the new firmware (m05) I am also on Windows 8.1 64bit. Here are the logs from the event viewer. A TCG Command has returned an error.Desc: AuthenticateSession
Param1: 0x1
Param2: 0x60000001C
Param3: 0x900000006
Param4: 0x0
Status: 0x12
EnhancedStorage-EhStorTcgDrv
Opcode : TcgLib
A TCG Command has returned an error.
Desc: AuthenticateSession
Param1: 0x1
Param2: 0x60000001C
Param3: 0x900000006
Param4: 0x0
Status: 0x1
EnhancedStorage-EhStorTcgDrv
Opcode : TcgLib
Everytime I google "A TCG command has returned an error" the first thing that even comes up in google searches is a slew of M500's with bitlocker problems or sleep / power saving option problems, but I do not have any of those enabled. Thanks in advance.For sure the different speeds is the difference between the ASMedia and the Intel ports - http://www.tomshardware.com/reviews/storage-controller-performance-ssd,3540.html
In general Intel ports are suggested as preferred. Perhaps they are more reliable (I don't have any data for that) and they have more frequent driver support/updates.
It is hard to tell if it is possible that ASM controller is a contributor to the TCG error messages and/or to system freezes/crashes.
I think it is worth to note that as far as I know hardware based drive encryption (eDrive type) doesn't work with Intel RST drivers and it works only with inbox MSAHCI driver. That makes me think that the storage driver can affect the way the BitLocker works.
What is your Windows 8.1 version, is it Pro or Enterprise? W8.1 Pro or Enterprise clean installation can switch the drive to TCG Opal mode and it is done silently. W8.1 do it happily without user's permission (and in many cases without user's knowledge). So my guess is that after silent switching the drive to TCG Opal mode the OS is using some parts of BitLocker... code/engine/mechanisms perhaps.
You have notice the crashing only really happens when games are being played. I was wondering that maybe the crashes are not related to TCG errors at all and they are related to some other broken driver rather than TCG thing?
It is possible this is something a reinstall might fix and I would probably try that. But first I would try to switch drive to Intel driven connector and then check and verify all major drivers installed in the system, including motherboard's BIOS - http://www.asus.com/Motherboards/MAXIMUS_VI_HERO/HelpDesk_Download/
If that wouldn't help I would probably do as suggested by r0m30.
4. PSID revert the drive (and possibly secure erase it), set a BIOS password on the drive if your motherboard supports it and reinstall window.
I think romeo was refering to HDD password. It is little weird but motherboard's manual doesn't mention anything about HDD/Drive/Disk/ATA password.
In case the mobo supports Drive/ATA password I would do following:
- PSID revert the drive
- set HDD password
- clean OS install
In case it doesn't support ATA password (that would be odd but possible I guess):
- secure erase the drive
- clean OS install
Drives connected to Intel's ports of course -
:ctdevcon.dll has returned an error. mixer will now exit
hey when i try to start creative mixer this comes up:::::ctdevcon.dll has returned an error. mixer will now exit
why does this happen and how do i fix it ? i reinstalled drivers and theirs no new drivers
can creative make any thing that will work with out probloms ??any one [email protected]
-
HT1911 can't install app as apple Id has been disabled
Can't install app as while instaling app I get the message apple ID has been disabled.
There is a difference between plain 'disabled', and 'disabled for security reasons'.
Contact iTS, let them know the Apple ID that is giving you that message so they can check into it.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Error when installing apps: Cannot connect to iTunes store
I have a 3G and i've been able to download and install apps through the app store via iPhone. Recently, the iTunes store on my computer gives the error "We could not complete your iTunes store request. An Unknown error occured (5002)" anytime i search or try to download. Similarly on my iPhone i cannot download through the App Store ever since the computer store error, which i concluded to be a linked error. What is error 5002 exactly, and should I just reinstall iTunes to see if the error is corrected?
Hey jnageer1037,
Have you updated to the latest version of iTunes and iPhone software, currently iTunes 8.0.1 & iPhone software 2.1.
http://www.apple.com/itunes/download/
http://www.apple.com/iphone/softwareupdate/
When you double click on one of the downloaded apps in iTunes does iTunes say the app is missing?
JWalton,
Do you see the same issue after downloading FREE ON iTunes content and then syncing it to the iPhone? You can find FREE ON iTunes content by going to iTunes> iTunes Store> FREE ON iTunes near the bottom center of the page.
Jason -
Can someone help? I did an apple hardware test and it has detected an error: 4SNS/1/40000001:VDOR
What does that mean? Can i correct it myself? how?
my computer is "tiger" mac os x 10.4.11, Processor: 2.16 GHz Intel Core 2 Duo, Memory: 2.5 Go 667 MHz DDR2 SDRAMThank's for answering, realy appreciate your time,
A technician had installed last year "mac os x snow leopard 10.6" (family pack) at around $49.00 - I had originaly mac os x 10.4.11 (tiger). He had changed my hard drive, added memory: 2.5 Go 667 MHz DDR2 SDRAM, processor is: 2.16 GHz Intel Core 2 Duo (he told me he had to change my hard drive probably due to a power shortage. Before he did the changes, I had done a hardware test: it gave me the same error as today 4SNS/1/40000001:DVOR, He cleaned the inside, but he did not change any sensors. What am i to do???
Not too long ago i started having problems. (probably from a power shortage, at one point. I don't know if my external back up got corrupt. so i don't want to use it. He had eraced tiger 10.4.11 and installed snow leopard 10.6.
I eraced snow leopard and installed mac os x 10.4.11 (that came with my computer).
I wanted to install mac os x 10.6 (snow Leopard) without eracing tiger (chat sites say you can do that) but it said it couldn't use my hard disk because of my memory: my info says: used: 18,78 Go on the disk, available: 446.66 Go, Capacity: 465,44 Go
So that's when i did a hardware test with the CD1 of mac os x 10.4 (tiger) and that where i got the message.
If i have a sensor problem, then i guess i'm waisting my time trying to reinstall mac os x 10.6 (snow Leopard) or am i doing it wrong. I was told i could leave tiger there and upgrade directly to snow leopard, without installing mac os x 10.5 (leopard).
Thank again -
RWB - Cache Connectivity Test - Adapter Engine shows error
Hello Friends,
In our one production system (PI 7.1), while do 'Cache Connectivity Test' from RWB -> Component Monitoring, it shows the following error for Adapter Engine under Integration Directory.
Error:
Cache notification from Integration Directory failed Error when accessing the System Landscape Directory.
No SLD elements of type SAP_XIAdapterFramework found
But, Integration Server - ABAP, Integration Server - JAVA shows green color. The messages are flowing through the Adapter Engine fine. i.e I am seeing 2 Adapter Engines under Integration Server in Component Monitoring. One Adapter Engine is in grey and another Adapter Engine shows green color.
When I click the grey color adapter engine, it immediately turns to red color and some different host name url is displayed (http://<wronghost>:53000/AdapterFramework/rtc).
So, what could be the problem ?
Kindly clarify, friends.
Thanking you.
Kind regards,
Jegathees P.Hello Jegathees
Apply the solution in note #804124 HTTP communication with XI Adapter Engine fails. Set the parameters:
SLD.selfregistration.hostName
SLD.selfregistration.httpPort
SLD.selfregistration.httspPort
as described in the note.
Regards
Mark -
How to undo an order of transport which has returned an error code 8
Hi experts,
While transporting an installation of business content, it has removed a lot of transfert rules. Could you tell me how to undo this transport from quality to the production envirenenmet. Unfortunately I dident check the transport order which has returned the code error 8.
Thank you for your answer.
Regards.Hi Joseph,
Transport all the objects you want in the order again with a new request. This will replace all the transported objects and you will get all the objects transported.
Regards,
KK. -
This new update has been horrendous I have uninstalled multiple application to try and fix the battery issues with no success. I have read on multiple forums that this was known issue prior to pushing out the update to Lollipop when will this be resolved? I have to now keep a portable charger with me at all times which is very inconvenient.
We wanttoi do all that we can to ensure that you are able to enjoy your Galaxy S 5! Thanks for posting the troubleshooting steps that you have already completed. May I ask how long ago, in days, did you complete the update? It typically takes about 3-5 days for the software to settle. If it has been longer than 5 days then I would suggest a factory reset and use the device for a day or two without installing any apps. Once you have done so, please retest and keep us posted.
ArnettH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
New r12 Install, Linux, worked, now 500 Internal Server Error
I recently installed Oracle Enterprise Linux and Oracle 12.1.1 on my laptop to use the Vision instance. I went through all kinds of problems, but ended up getting the instillation to work. RapidWiz successfully completed, and I was able to log into Oracle E-Business Forms. I shut down my computer and when it restarted I launched the adstrtal.sh and tried to log in. I got an internal server error. I have tried searching the internet for all kinds of things, I have tried restarted my computer, Oracle, etc, and still no luck.
I would appreciate any help you can offer!
Adstrtal.log
[Service Control Execution Report]
The report format is:
<Service Group> <Service> <Script> <Status>
Root Service Enabled
Root Service Oracle Process Manager for VIS_localhost adopmnctl.sh Started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP Server VIS_localhost adapcctl.sh Started
Web Entry Point Services OracleTNSListenerAPPS_VIS_localhost adalnctl.sh Failed
Web Application Services Enabled
Web Application Services OACORE OC4J Instance VIS_localhost adoacorectl.sh Started
Web Application Services FORMS OC4J Instance VIS_localhost adformsctl.sh Started
Web Application Services OAFM OC4J Instance VIS_localhost adoafmctl.sh Started
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrVIS_localhost adcmctl.sh Started
Batch Processing Services Oracle Fulfillment Server VIS_localhost jtffmctl.sh Started
Other Services Disabled
Other Services OracleFormsServer-Forms VIS_localhost adformsrvctl.sh Disabled
Other Services Oracle Metrics Client VIS_localhost adfmcctl.sh Disabled
Other Services Oracle Metrics Server VIS_localhost adfmsctl.sh Disabled
Other Services Oracle MWA Service VIS_localhost mwactlwrpr.sh Disabled
ServiceControl is exiting with status 1
adalnctl.txt
07/10/09-15:18:34 :: You are running adalnctl.sh version 120.3
LSNRCTL for Linux: Version 10.1.0.5.0 - Production on 10-JUL-2009 15:18:34
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=localhost)(Port=1626))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
07/10/09-15:18:34 :: adalnctl.sh: Starting listener process APPS_VIS.
LSNRCTL for Linux: Version 10.1.0.5.0 - Production on 10-JUL-2009 15:18:34
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Starting /Oracle/apps/tech_st/10.1.2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.1.0.5.0 - Production
NL-00280: Message 280 not found; No message file for product=network, facility=NL [Oracle/inst/apps/VIS_localhost/logs/ora/10.1.2/network/apps_vis.log]
NL-00278: Message 278 not found; No message file for product=network, facility=NL
SNL-00016: Me
Listener failed to start. See the error message(s) above...
07/10/09-15:18:34 :: adalnctl.sh: exiting with status 1
*./adapcctl.sh status*
You are running adapcctl.sh version 120.7.12010000.2
Checking status of OPMN managed Oracle HTTP Server (OHS) instance ...
Processes in Instance: VIS_localhost.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oafm | 5353 | Alive
OC4JGroup:default_group | OC4J:forms | 5260 | Alive
OC4JGroup:default_group | OC4J:oacore | 5180 | Alive
HTTP_Server | HTTP_Server | 5124 | Alive
adapcctl.sh: exiting with status 0
host file
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
-----hsawwan wrote:
Did you try to run AutoConfig and see if it completes successfully?
I have uploaded the log file here: [http://edhayes3.wordpress.com/files/2009/07/adconfig.doc|http://edhayes3.wordpress.com/files/2009/07/adconfig.doc]
This log was located in "/Oracle/inst/apps/VIS_localhost/admin/log" folder
The file extension was changed to a .doc instead of a .log.
I see that there are 2 other files in the very first Admin/log folder that are not in any others. My guess is whatever created these should be ran every time I initiate the instance? The files that are present in the first (date) folder that are not in the subsequent (dates) folders are "DependencyModeller.log" and "NetServiceHandler.log". After a reboot, what should I be executing to initiate the instance?
All I have been executing is the "/Oracle/inst/apps/VIS_localhost/admin/scripts/adstrtal.sh" script. -
I recently purchased a used 2nd generation Apple iPad. I was told that the iPad is locked because of Apple ID. I plan on erasing everything on the iPad and setting it back to factory defaults. Can I now use my personal Apple ID via my iMac to start it as it originally came from Apple??
It is a brick! But I did somehow get into the iPhoto section and was able to find the Former owner that owned the iPad and was able to contact him VIA FaceTime. on my iMac. He was of little help because he was not the original owner, but he bought the iPad as I did from a huge supplier and i was able to contact that supplier who refused to give out any information about the previous owner. I had the iPad hooked up to my somehowiMac via the USB cable and went through the setup procedure to no avail. Then after pressing the Home button several times it somehow went to the iPhotos that were on the iPad? There were 2 pictures of the owners email address. I then copied them to my iMac and used iPhoto app to enlarge the photos. It worked.So there is a way,just takes time to somewhat hack into Find My iPad?Phone.
Personally, it is not Apple's responsibility to protect customers of their personal DATA. With such a high security application. Then of coarse it is a great idea. Then again it is the responsibility of the former owner to wipe and rest the iPad before reselling it. This being the case like those sold on eBay and elsewhere that are ID Locked should not be allowed to be sold. Personally the ID lock is much like a VIN number of a car. In most states one cannot sell a car without the VIN Numbers. Somewhat the same thing should be true of ID Locks -
Portal connection test for connector giving error.
Hi All,
In the portal ,
No connection to system SAP_BW found:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not initialize physical connection.
Connection Failed: A nested exception occurred. Could not create JCO connection.
No RFC authorization for function module RFCPING.
Can somebody help in this.
ThanksBut the message is pretty clear - "No RFC authorization for function module RFCPING." Assign authorization for mapped user (or current user in case of SSO)
Maybe you are looking for
-
Does Pages support correction for multiple languages ?
-
About jbuilder4 and weblogic6.0
when i want to deploy my jar to weblogic and do as the wizard,select the folder application as standalone,then start deploy. it will report: Stored archive as D:\weblogic\wlserver6.0sp1\config\mydomain\applications\test.jar Error type: java.lang.Secu
-
Forgive me, you will have to talk to me like I am an idiot with audio stuff....because I am! lol I sold my father inlaw my Powerbook, his first mac, in large part because of the audio he wants to do. So he asked me in GarageBand how does he change pi
-
Ascending & Descending images when sorting report columns...
Hi guys, Have you ever tried changing sorting images to custom ones? I've tried with no result..replacing theme images doesn't work..Have no idea what to do..Please help. With regards, PsmakR
-
i downloaded a new update and now all my photos and contacts are gone