New Report Option in OBIEE 11.1.1.7

Hello All,
I just started creating a New Report for the first time, for that i have created one Data Model using Essbase Datasource.
After New -> Report -- It is asking to select Use DataModel (or) Use SpreadSheet (or) Use Subject Area.
Then i selected DataModel which i have created and click on Guide Me... After that nothing happened. I tried with Use Report Editor also.... but no use i am not going from that screen.
Can you please help me to create a New Report using DataModel or Subject Area.
Thanks,
Prathap

Resolved...
I am using Internet Explorer 8.
Earlier i am unable to view the Previous, Next, Cancel and FInish buttons in the bottom due to browser.
If i zoom out then able to see those buttons and can go to next steps.

Similar Messages

Create New folder options is not coming in OBIEE 11G.

Hello Everyone,
I am testing Authorization part of the dashboard rite-now and issue is like I am not able to Create any New Folder within My Folder for Catalog.
I gave my self Read, Traverse Access to dashboard and Reports that are stored in Shared Folder, now I want to use Shared folder's Reports and want to create My Dashboard. but even I am not able to Create My Dashboard too because I can't save any reports in My Folder.
I checked with Manage Privileges options too, where I gave access to any Authenticated Users to create Personal Storage (My Folders and My Dashboard) , Create Folders , Save Customizations ..
if there any other change that i need to do???
Thanking you..

Hi Veer,
Yes, I just tested this thing out in 11.1.1.5. Please find more details below.
1. I create a sample 'BIConsumer' user.
2. Logged into the BI Server.
3. Navigated to Catalog and clicked on New
4. I could get only two options 'Report Job' and 'Action Intelligence'.
To provide proper privileges,
1. Logged into BI Server as BIAdministrator.
2. Navigated to Administration -> Manage Privileges -> Catalog/
3. Given explicit permissions to 'BIConsumer' to create folders and 'My folders and Dashboard'.
To verify,
1. Logged back to BI Server as 'BIConsumer' user.
2. Now, in the catalog could see 'New Folder' option under 'My folders'
For further analysis, can you please check which roles this particular user is having? You can click on username at the top right corner -> My Account->Roles and Catalog Groups.
Thank you,
Dhar

BAM 11g - creating new report - More options not active

I am creating new reports in BAM 11g. 11.1.1.3.0 Build 8553
I can select the Data Object and Data Fields, but.... When I select any of the More options.... such as Create a filter or Create a calculated fied etc... I get the View Prompts screen and I cannot get out of it.
The Properties object works, but as soon as I go back to the Data Objects - I am on the View prompts screen with several unlabelled tabs... and I can only OK, Cancel or Save.
If I re-edit the reprt - I go straight to this View Prompts Screen... and can do nothing on the data objects.
Rebooting makes no difference....
Has anyone else seen this.
I am using JDK 1.6.0_14... which i picked up from a post in the forum.... but this has made no difference.
Thanks
Cliff

There must have been a typo or something when I reset the Java version.... re applying the copy of JDK 1.6.0_14 and restarting, Fixed the problem.

OBIEE 10g How ADD new report and use outer join

Hi,
I have to add a new report that use a new view...(just created in db)
I'm new in OBIEE.. can you explain how can i do it?
Actually:
1. I opened administrator tool and import new view (and created an alias) in physical
2. I built a logical table in BMM
3. I built a new presentation table in presentation
problem: the table in BMM have yellow icon like a fact table.. why??
can you explain me what i have to do?
thank you
Edited by: 1006028 on 15-mag-2013 2.54

By default OBIEE 10g considers a table as fact table that is dragged from physical to BMM layer. That's why you see the yellow color icon.
If it is a dimension table, you will have to join this table with a fact table in BMM layer. After this the yellow color icon will go away.
Pls mark correct/helpful.

Do we have any option to track the number of downloaded reports from the OBIEE dashboard or Analysis by the user using usage tracking.

Do we have any option to track the number of downloaded reports from the OBIEE dashboard or Analysis by the user using usage tracking.

I'll ask the question of our onsite Microsoft consulting guys, but it's my understanding that as enterprise admins, we have no controls over it. This is an outcome of putting the end-users in charge of their own destiny.
We can revoke a user's entitlement to Office365ProPlus in the portal and via scripts, but AFAIK only the user controls the allocation of their entitlement.
Revoking an assignment/allocation, when logged in as the user, doesn't require access to the assigned/allocated computer, but if the information about the assigned/allocated computers in the portal is vague or ambiguous, it's easy to revoke the "wrong" one.
There's not much here in this forum about the hosted/cloudy aspects, since this forum is mainly about the client-side bits (the client applications, setup and configuration of those) - so in here, I usually refer people off to the O365 community for the
portal and hosted stuff.
(we have MS onsite at the moment for a big planning piece, around O365 and also Win8.1 and VDI. I'm not usually this lucky to have those guys on tap ;)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

New Currency symbol is OBIEE

Hi
I am using OBIEE 11g and in my reports i want to use Indian rupee Symbol in Coumn headings
I have downloaded the .ttf file for the font
How to proceed
Thanks in Advance
Abdul

1) In the path u said user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\_WL_user\analytics_11.1.1\silp1v\war\res i couldn find analytics_11.1.1
Mine is 11g simple install, can you check if you can find analytics_11.1.1 in this path?,\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1
2)I tried the same thing in OBIEE 10g, I could find the image in header but i m unable to format the size exactly as i wantedTry to modify the height and width here: column Name<img src="http://hostname:port/analytics/res/RupeeFont.png" height="9" width="10" /> or get an image of your desired dimension from Google and paste it in the image location path.
>
>
Is there any option to add New Font Style in OBIEE by adding the .ttf file in any locationLet me try this out in my local and update the status.

Regarding print option in obiee 11g

Hi All,
i am getting one issue when using print pdf option in obiee 11g.
i have a report in dashboard and for displaying data in that report i have used custom format of columns.
but when i an using print pdf option , it is not retaining custom format of columns of report.
please suggest any workaround to me for this problem.
Regards,
Manoj

I think it is expected behavior. Try out saving as html and then saving it as pdf.
If helps mark

Add a new selection option on VL71

I want to add a new selection option on VL71.
I know that I can do an implicit enhancement.
But I am not sure if I can add it in the place as showed.
If the enhancement cannot solve the problem, do I have to copy out a Z program.

Dear Experts,
In HUMO report, after the specail stock, We want add another selection field "Special Stock Number".
Do we need to go for a development for this?
Any alternate way available to get this done without much development involved? Pls suggest.
Regards,
Shetty

Creating new report category in Abap HR

When I try and create a new custom report category, I get a message saying "Choose the key from the allowed namespace". I did use a Z report category (we do have Z report categories that have been created earlier by somebody else). It would be great if somebody could list the steps to create a new report category. By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
I did try using SM30 to create a new entry but got the same message as above.
Thanks.

>
Lakshmi Srinivasan wrote:
By the way, I would just want to keep just the personnel number (PNPPERNR) in the selection option.
> I did try using SM30 to create a new entry but got the same message as above. Thanks.
You can use the Report category HRDKPRNR to meet your reqt.
~Suresh

How to use a repository in a new report

Hello,
I am starting to learn OBIEE and installed it in my home environment. I installed OBIEE, and used the RCU to install a repository in an Oracle database.
Then, I used the BI Administration tool to make a 'repository' which connects to my data (also in an Oracle database).
In the BI Administration tool I now have a physical layer, a business model and mapping, and a presentation layer. I saved this as a rpd file on my harddisk.
Then, in the Oracle BIEE Home I choose 'New report'. But I cannot find how I can choose my 'repository' with my data. I also tried to make a new datamodel, but here I am also not able to choose my repository.
How can I connect to my data in a report ? How does it work ?
Many thanks in advance,
Best Regards,
André.

You are totally getting Confused..
Have these understanding first.
You have DB installed.
You will create schema(Two users) in DB using RCU(Repository Creation Utility:Basically stores metadata required for OBIEE).
You will install OBIEE and use these schema there.
Above installation installs weblogic and then deploy BI files to weblogic to make them work.You should remember weblogic password.
Now when you open up Admin tool --Repository password should be 'Admin123' (A in capital) and username is weblogic and password should be weblogic password.
You will be able to open up the RPD in online mode.
I suggest you to first go through the Architecture of OBIEE and then start installation and start exercises.
mark correct or helpfull if it helps.Also let me know if you were able to open RPD and answers.
Regards,
Veeresh Rayan

Error of New report creation in BAM Active Studio

I just installed Oracle BAM. I entered in WEB-interface and selected Active Studio.
Then I pressed "Create a New report" Button. I've had the following message report:
The Data Object was deleted.
What shall I do to fix this problem? The error details see below.
Exception Message:
The data object "_Custom_Parameters" does not exist.
Stack Trace:
at Oracle.BAM.ActiveDataCache.DatasetSchema.Load()
at Oracle.BAM.ActiveDataCache.DatasetSchema.Get(Dataset oDataset, Boolean bCache)
at Oracle.BAM.ActiveDataCache.Dataset.LoadSchema(Boolean bCache)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier, Boolean bReadOnly, Row oLooksertRow, Boolean bIncludeAllColumns)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier)
at Oracle.BAM.Middleware.Persistence.Parameters.CustomParameter.GetAllCustomParameterIDs(Context oContext)
at Oracle.BAM.Middleware.ImportExport.ReportExporter.GetParametersXML(Int64 lReportId, Context oContext, IncludeCustomParameters eIncludeCustomParameters)
at Oracle.BAM.ActiveStudio.ReportEditor.EditReport()
Debugging Information:
The data object "_Custom_Parameters" does not exist. [ErrorSource="ActiveDataCache", ErrorID="ADCDataSetNotFound"] Debugging information: Oracle.BAM.ActiveDataCache.Common.Exceptions.DataObjectNotFoundException: The data object "_Custom_Parameters" does not exist.
at Oracle.BAM.ActiveDataCache.DatasetSchema.Load()
at Oracle.BAM.ActiveDataCache.DatasetSchema.Get(Dataset oDataset, Boolean bCache)
at Oracle.BAM.ActiveDataCache.Dataset.LoadSchema(Boolean bCache)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier, Boolean bReadOnly, Row oLooksertRow, Boolean bIncludeAllColumns)
at Oracle.BAM.ActiveDataCache.Rowset..ctor(Context oContext, Modifier oModifier)
at Oracle.BAM.Middleware.Persistence.Parameters.CustomParameter.GetAllCustomParameterIDs(Context oContext)
at Oracle.BAM.Middleware.ImportExport.ReportExporter.GetParametersXML(Int64 lReportId, Context oContext, IncludeCustomParameters eIncludeCustomParameters)
at Oracle.BAM.ActiveStudio.ReportEditor.EditReport()
Assembly: ActiveStudio
State: Oracle.BAM.ActiveStudio.ReportEditor
Event: EditReport
xmlReportDef:
<Report type="tiled"><Layout maximize="true"><View id="view1" top="0.0%" left="0.0%" width="100.0%" height="39.5%" /><View id="view2" top="40.5%" left="0.0%" width="100.0%" height="59.5%" /></Layout><Views><View id="view1" /><View id="view2" /></Views></Report>

Looks like one of the system dataobjects wasn't properly loaded.
I believe you have some/most tables for the Active Data Cache (populated during install) because it appears you are able to start the Oracle BAM Active Data Cache service and get to the Start Page.
Here's the xml for the system dataobject that appears to be missing.
Note: I assume you have version 10.1.2.1, the latest version of BAM.
=========================
<?xml version="1.0" encoding="utf-8"?>
<OracleBAMExport Version="862.0" Build="3.4.5109.0">
<DataObject Version="14" Name="Custom Parameters" ID="_Custom_Parameters" Path="/System/Custom Parameters" External="0">
<Layout>
<Description><![CDATA[This data object contains user defined Custom Parameters that are available across all reports.]]></Description>
<Column Name="Name" ID="_Name" Type="string" MaxSize="64" Nullable="0" Public="1" TipText="The name of the Custom Parameter that appears in reports." />
<Column Name="Value" ID="_Value" Type="string" MaxSize="1000" Nullable="0" Public="1" TipText="The value of the Custom Parameter." />
<Column Name="Description" ID="_Description" Type="string" MaxSize="1000" Nullable="1" Public="1" TipText="Optional long description." />
<Indexes />
</Layout>
<Contents />
</DataObject>
</OracleBAMExport>
===========================
Paste this into notepad and save as customparameters.xml
Then import using DOS running this command:
icommand cmd=import file=filename.xmlThen try to recreate the report again.
Check that you have all system dataobjects in Architect:
System\Alerts\External Actions
System\Alerts\History
System\Custom Parameters\Custom Parameters
System\Views\Action Form Templates
System\Views\Chart Themes
System\Views\Matrix Themes
System\Views\Util Templates
Depending if you have installed and started the Oracle Plan Monitor service, you'll see this also:
System\Plan Monitor\Oracle BAM Plan Monitor\Journal
System\Plan Monitor\Oracle BAM Plan Monitor\Lock
System\Plan Monitor\Oracle BAM Plan Monitor\Plan Status
System\Plan Monitor\Oracle BAM Plan Monitor\Service Status
====================
IF you have any missing system dataobjects, I would suggest drop the Oracle user account used to install BAM so you would delete all it's tables. Then recreate the same user account with resource and connect privileges. Then run cacheinit.exe from your OracleBAM\BAM directory. This will recreate the entire ADC for you.
Sincerely,
Michelle

New report J1INEMIS

Hello,
SAP has given a new report for TDS as J1INEMIS.When we are running the report it is not giving the data if we keep Vendor field blank.
And I want to know the use of two options given in the report
1. Vendor Docs with 100% Exempt (Means how would we define document is with 100% Exempt
2. Vendor (Without PAN Docs)
I have also tested some scenario where PAN number is not update in CIN details in vendor master. And When I ran the report keeping Vendor field blank with the option Vendor (Without PAN Docs) system dint fetch any report.
Please advice.
Regards,
Abhinav Sharma

HI,
Please refer the below link for more information regarding J1inemis
http://wiki.sdn.sap.com/wiki/x/8oMEDg
Regards
Madhu M
SDN-WIKI-PAGES
http://wiki.sdn.sap.com/wiki/x/UgTpCw                       (RUPEE WORD FORMAT)
http://wiki.sdn.sap.com/wiki/x/2BAMDg                        (J1INACKN )
http://wiki.sdn.sap.com/wiki/x/3xAMDg                        (J1INCCREP)
http://wiki.sdn.sap.com/wiki/x/6xYODg                        (J1INREV )

How to add new payment Options in WEB SHOP

Hi all
We need to add new payment options in the B2C shop, but we don't find any customizing place to do it, we read about the BADI CRM_RISK_MGMT_BADI, but in the documentation said that we can set a Default payment option or exclude, but nothing about to add Customer Options.
Any info regarding would be very useful.
Best Regards

Look at your Payment Process Profile. THere should be a reporting subtab and within that subtab is a Separate Remittance Advice region. I believe that is where you specify the format for the remittance advice document (which is built in XML Publisher). Take a look at that.
John Dickey

Develop new Report for Summarized JIT (Just In Time) calls

Hi to all,
Can anybody kindly tell me how to develop new report for summarized JIT (Just In Time) calls.
Thanks in advance,
Regards
Simi

I think it is a good feature, but I'd like to make some suggestions.
1) When the dialog pops up (like your attachment), it would be nice if I could tell it right then that I don't care about that advice. Right now you have to click on the link and then say you don't want the advice in the future. I think it is that extra step that is really annoying. I think, like most people, my instinct is to just close the dialog. Then next time I run LabVIEW I have to deal with it again. After the 5th time dismissing the damn thing I turn it off.
2) It would be nice to have an easy way to turn JIT advice off for a particular session. For example, I'm called on to help get new employees up to speed in LabVIEW. When I sit down at their computer to help design/debug things, I would really like to turn off JIT advice but just for my session. I don't want to change the other persons settings.
3) It would also be nice to be able to turn off JIT advice without going to the options.
So, I guess what I would like is this. When the JIT advice dialog comes up, instead of only having the link to the advice I'd like to see some a button that will turn off this topic in the future, a button that will turn it off for this session of LabVIEW and a button that will turn JIT off for good (with a verification dialog).
So, experience programmers with a new install will just turn it off for good the first time it pops up. Experience programmers on someone else's machine can turn it off without messing up the other persons ini file and I can leave it on when LV8 comes out and just dismiss the old advice quickly as it comes up.
Pat

How to created a new report in content tracker report?

Hi
I need to created a new report that show who modified the document's metadata and when, but I have never used Content Tracker and I do not know how.
Appreciate the help you can give me.
Thanks.

Hello,
The content tracker and ContentTrackerReports components can be installed in UCM server by simple clickable options. Below are the steps to install the Content tacker and Content report.
Steps:
1. Open the UCM instance with admin
2. Click Admin Server under Administration link.
3. Click Content Tracker and ContentTrackerReports checkbox ( under Document Management)
4. Now Click the update button at the bottom.
5. Restart the UCM server instance to see the changes.
Now you will see an option for Content Tracker Reporting. It has some default reports.
Let me know how it goes. If you need.... will explain how you can create your custom reports.
If its helpful then please mark correct or helpful answer.
Thanks,
MAK

New Report Option in OBIEE 11.1.1.7

Similar Messages

Maybe you are looking for