New Smartform for Sales Order

Dear Gurus,
We need to Print Sales Order & we are creating new Smartform for the same.
The standard Output type for Sales Order is BA00, but we have created new output & assigneed the same in Output determination.
Now to the best of my knowledge, the Output type (e.g. BA00) calls a particular standard SAP Program (e.g. RVADOR01) & subsequently that Program transfer Sales Order number & othre data to the SAPScript which Prints the out in required format.
Now that we are creating a new Smartform our ABAPers are facing a problem on how to import the Sales Order Number in Z-report.
Can anyone please help...
Thanks,
Jignesh mehta

RVADOR01 is for SAPscripts only, there is a different program for Smartforms. Unfortunately, we don't have it right now and I can't remember the name, but you can find it through the SAP Marketplace or on SDN.
Even if you have created a custom Smartform, you can still use the standard processing program, as long as the interface is the same. But if you have to develop a custom output program, it probably makes sense to make an exact copy of the standard one and then only to change what's necessary. For example, take a look at the Smartform program for billing output RLB_INVOICE, it wouldn't be much different for the orders. In NAST table you'll get the document number and partner data and you can go from there.
Hope this helps.

Similar Messages

Email and Fax smartform for Sales Order Confirmation

Dear friends,
I have a reqirement to mail and fax Order Confirmation ( Smartform ) to the ship to party.
In NACE, I have created a Output type ZAU1 in which I have considered 5 External send and assigned the driver program and routine. Also I have selected " send immediatly ". I am unable to debug the driver program. I have put breakpoint in the routine ENTRY as well. Please put some light on this.
with regards,
Sathar

This is for standard t-code 'VA02'. In VA02 goto extras->header->texts->edit
i have put ZAU1... also selected the communication strategy..
when i save... no process log appears aslo its giving error status...
Regards
Sathar

Fetch Vat and Octroi value for Sales Order Smartform .

Hi all ,
I am using a copy of /SMB40/SDORC_A smartform for sales order creation . I have to pass the vat and octroi of individual item as well as on the final total and then give the final bill amount . Can anyone please tell bewhich fields should i use and which areas do i need to do the changes in the smartform.

Hi Disha,
From the billing number VBRK-VBELN, pick the value of VBRK-KNUMV and pass this to KONV-KNUMV and display the value of KONV-KWERT against KSCHL
Regards..
Palaniayppan subbiah

"Not possible to determine account for sales order or project stock"

Hi,
I get this error when trying to create a purchase order (type EUB). I think I should define a new account for sales order. How should I proceed?
Thanks in advance.
Luis.

Hi
1) Check the spro-MM-purchasing-account assignment-Maintain account assignment categories -
Here check the account modifications against Account assignment category C,P
2) Then go to OBYC -GBB check the account maintained against the account modifier obtained in step 1
Regards
Sandeep

Standard(Smartform) Program for Sales order Confirmation

Hi Experts,
I have a new Requirement on Smartforms,
It is Sales order confirmation, Can Any one say what is Revelant program for this Requirement...
(RVORDER01) is for SAP SCript But i Required Smartform Program..???
Thanks,,
ksreddy.

I Required a program for sales order confirmation ..
Resolved..!!
Thanks,

User Exit for sale order for adding a new partner

Hi
i am having the Scenario to add a new partner in sales order in both VA01 / va02 transaction .
i am using the exit named MV45AFZZ . (USEREXIT_MOVE_FIELD_TO_VBAP) for this scenario.
Its perfectly working for VA01 , but not VA02 .. why ..
can any1 explain me ..

Hi Irfan,
You want to add partners in Sales order, the partners data will be saved in VBPA table.
The USEREXIT_MOVE_FIELD_TO_VBAP is used for values for fields at sales document item level.
For you its working for VA01 because , you have modified the strucure XVBPA for partners
data and it is not saved yet to the database table so it is available in VA01 and in VA02
it is checking the VBPA table there this data will not have been saved please check VBPA
for your sales order.
Please check below things.
1) Check whether you have passed UPDKZ in XVBPA UPDKZ has below values INSERT (I),DELETE (D),UPDATE(U) etc nad
if it doent works
2) Please check the SAVE_DOCUMENT_PREPARE form and check XVBPA here whether it contains the
entries you modified if not use the same code as you used in USEREXIT_MOVE_FIELD_TO_VBAP
then these changes will be saved to database and hopefully you will get it in VA02 as well
also pleaseuse the flag UPDKZ whenever you modifying this tables for your case
XVBPA-UPDKZ.
Regards,
Pawan

Driver program for sales order in smartforms?

whatst he driver prog for sales order in smartforms?
how to attach my smart form to driver prog
thanks & regards
lakshmi

Hi,
Driver Program is the program which is used to link the form and the ABAP program.
U have to use the FM 'SSF_FUNCTION_MODULE_NAME' to give the form name.
Here 'Z_TRNG_SMART_MUL_PURCH_T012' is the form name.
sf_formname = 'Z_TRNG_SMART_MUL_PURCH_T012'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = sf_formname
    IMPORTING
      fm_name            = sf_fm_name
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION sf_fm_name
    EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
      v_ekpo                     = v_ekpo
     v_adrnr              = v_adrnr
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
    TABLES
      it_ekko                    = it_ekko
      it_ekpo                    = it_ekpo
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards,
Roja Velagapudi.

Adding a new search criteria in Web UI for Sales Order

Hi,
We have a requirement for Web UI as follows :
We want to add the ID number (identification number in BP ) as search criteria for Sales Order simialr to search criteria available in Accounts with ID number .
Can any one please give some inputs on this ?
Regards
Vinayak

Hi Vinayak,
I will try to give you some technical advise.
What you would need to do is:
In transaction SM30 open up view: CRMV_OBJ_BTIL
There is an entry for External Object Name "BTQAct"
The currently used DDIC structure is CRMST_QUERY_ACT_BTIL
You will need to adjust this structure to bring completely new parameters to the UI. This means put in your own.
As you can see in detail for this entry there are three fields with name "Structure" the last one is for the GenIL handler class. Currently it should be empty (there is some fancy SAP logic to determine it automatically). You can override it with your own handler class implementing the logic. As a hint: The implementation class currently used is: CL_CRM_QACT_RUN_BTIL
Anyhow most 1Order searches are handled by the class CL_CRM_Q1O_SEARCH perhaps you can use it as well. Additionally it would be a good idea to provide your users with a value help.
Oh and there is a customizing that lets you define which options (IS, BETWEEN, IS NOT, ...) should be available for the user. Please do not try to do this hardcoded
cheers Carsten

User-exit for carry out new pricing while sales order save automatically

Hi all,
I need to carry out new pricing while sales order save automatically. Please any one help me to finding proper user-exit to achieve my requirement.
Thanking You.
Moderator message: please search for available information.
Edited by: Thomas Zloch on Jan 11, 2012 12:53 PM

Pl help.

New/Change Indicator for Sales Order IDoc

Hi Gurus,
Does anyone knows if there's a field in the IDoc Segment for ORDERS that shows or indicate if it's a new or changed order.
We are sending IDocs to our freight company for sales order, but we are trying to see if there's a way we can let them know if its a new or changed IDoc for sales order.
Is there any field for this or any work around on this?
Thanks for your help.

Segment Field ACTION is not been changed. I've just tested it and made changes to the Sales Order, the ACTION field is still carrying "000".
Like thomas said, can this be because I'm using message type ORDRSP instead of ORDCHG?
Does this make any difference?
Edited by: Basil Balogun on May 10, 2011 4:54 PM
Edited by: Basil Balogun on May 10, 2011 9:43 PM

Error while assigning Smartform in Sale Order

Dear All,
For taking the sale order printout, I do not want to create a SAP SCRIPT Form. So in NACE transaction, I have created one output type 'ZA01' and assigned a new Smartform to that output type.
Now, after adding this output type in Sale Order, when I am going to print the sale order using ZA01 output type system is giving error that WRITE_FORM is invalid, START_FORM is missing.
Please tell whether can we assign the Smartform to sale order or not. And if yes then how to correct the error.
Kind Regards,
Vishal

Dear Raghu,
I have checked it. And the entry is present in that table. But this error is coming only when I am giving Smartform. But system is not giving any error when I am giving script form.
So the problem is only for SmartForm.
Regards,
Vishal

Workflow for Sales Order Release via Status Profile

Dear all,
i want to make a workflow for sales order which have 4 User Status in One status profile.
Once Event triggered for sales order
1.   Mail should go to main authority with sales order number.
2. Once authority will do some changes in the required field then he/she changes
     the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
3. Once again same changes in sales order but now user status-2 from user status-1
     as per line Item and mail should go to department no-2 (Head authority).
4. Once again same changes in sales order but now user status-3 from user status-2
     as per line Item and mail should go to department no-3 (Head authority).
5. Once again same changes in sales order but now user status-4 from user status-3
     as per line Item and mail should go to department no-4 (Head authority) .
and parrally for each changes of Status mail should also go to User (Event Creator).
6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
please help me out.
Thank You

Hi Neeraj,
First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
Just go with these things and let me know if you get stuck up somewhere.
Regards,
Guddan

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

Create a new field in sales order

HI folks i want to create a new field in sales order item level how can i create

Hi,
Hope this will help you,
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.

How to implement Approval hierarchy for Sales Order in Order Management.

Hi,
We need approval process for sale orders in Order Management module. Currently we are using credit HOLD option for orders at shipping level. The issue we are facing now is we can not cancel those orders who contains Service Line item in it while on HOLD. The restriction raised at the time of cancelling the order that the Line Item is "fulfilled". Service line item's get fulfilled.
Is that any other possibility to have Approval hierarchy for Sales Orders in Order Management Module? If it is possible can anybody share the related document or implementation guide?
Thanks with anticipation in advance.
Many Regards
Kaleem Bhatti

I copied the standard order header workflow and the "Book Order, Manual" workflow to custom workflows. I then modified the "Book Order, Manual" workflow to put another completely custom workflow (call this "Approvals") in between the "Book Eligible" and "Book" steps.
The "Approvals" step assessed the sales order, changed the order header to the pending approval flow_status_code, and sent out the appropriate notifications. The "Approvals" step returned a Complete/Incomplete where complete would proceed to "Book" and incomplete would go back to "Book Eligible." The new workflow was then assigned to the order type needed. I don't still have access to that environment (job change) or I would give more definite instructions.

New Smartform for Sales Order

Similar Messages

Maybe you are looking for