New "spot the replies"

Sorry about that.
I ruined the "spot the replies" thread.
It turns out that HTML comments are unquoted in [ code ] tags.
Brilliant! Brilliant!

I fixed it.

Similar Messages

When I send a group txt and one of the people reply it creates a new message. How do I keep all the replies in the same message? I used to not have this problem but it started last month.

When I send a group txt and one of the reciepients replies it creates a new message. How do I keep all the replies in the same message?

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How to create a simple spot the difference game

Hi everyone. I'm new to the forums and relatively new to flash, so bear with me
I'm looking to do a very simple spot the difference game using flash CS3 and actionscript 2 for a school project.
As it stands, I have 2 images on separate layers on a timeline in the same frame, which has been paused using the 'stop' command. I am looking to have around 4 differences that, when clicked, will be recorded at the bottom of the screen.
The problem is, I am unable to find a way to get the differences recorded at the bottom in the order the user finds them, where each one is entered when the user clicks it, leaving gaps for those that haven't been found.
Being only a basic user, I am only familiar with scenes and basic timeline controls, and i'm hoping there's a relatively simple way of achieving this. However I am perfectly comfortable with using more complex actionscript, having done some programming before.
Thanks in advance,
Laurence

Thanks so much for all your help
Just one last thing about the 'if' script you gave me, what do i replace 'somemovieclip' with if I've already definied the movie clips I want to be monitored? Also, do I put that script on the frame? If not, where? It just doesn't work properly at the moment (skips straight to the completion frame even though the movie clips are hidden at the start) and i'm not sure about those things ^
Sorry to be of more trouble
Laurence

Can I have "All spots to process" checked at all times, even for new spot colors?

When I check “All spots to process” in the pdf export settings and save my settings the settings remember that I've checked this option. But, if new spot color objects using new spot color swatches are added to the document (or another document) and I go into the pdf export settings the check mark has been changed into a dash (with the actual checkbox highlighted) – signifying that only some of of the spot colors will be changed to process colors during export. I absolutely fail to see how this could possibly be seen as a feature and not a bug … if the user has checked “ALL spots to process” wouldn't the user expect ALL spots to be converted to process colors, rather than just any spot colors that happened to be in the document that happened to be open when the user first checked that checkbox and saved that setting?
Am I missing something here? What's the point of even having that checkbox as part of your saved export settings if it doesn't include any other spot colors than those used when saving the settings?
What's the point of having settings if you can't trust them, and still need to manually "override" them every time?
I see that some users have taken to writing scripts that instead turn all spot colors in the swatch panel to process colors, and while I commend them for creating that workaround, I'm still pissed at Adobe for not getting the function right.
If this is a feature, who is it for? People who want to add just certain spot colors and turn those into process colors rather than turning all spot colors into process colors are surely better off doing that in the swatches panel, where they're in total control of what's what. And if they don't want to "permanently" change their spot colors to process colors, and prefer to (temporarily) convert them during exporting/printing only, they can do that in the ink manager. But when someone checks convert "All spots to process" couldn't we safely assume they really want ALL spot colors to be converted and not just some of them? I mean, the way that checkbox behaves now, it's like it's a button and not a checkbox. As in: hit the button "All spots to process" to switch all currently viewed spot colors to process colors in the ink manager, OR check the "All spots to process" checkbox to always convert ALL spot colors to process colors during exporting/printing.
Anyone got any light to shed on this?
And is there a way to actually get the advertised behavior, because if you have to run a script every time you export/print you might as well just manually select the checkbox every time instead, but either way it's just really unnecessary as far as I'm concerned … Adobe should get the feature right instead.
If you save a setting and recall it, it shouldn't be possible for that setting to change into something else (in this case changing a checkmark to a dash).
Clearly CMYK printing is the norm, so for most users it would make a lot of sense to have the "All spots to process" checked most of the time, and then you just go into the swatches panel or the ink manager and set things correctly for those print jobs that really do need spot colors.
I myself am not one of those who add spot colors to my swatches unless I'm really using them as spot colors, but I often work with magazines and folders featuring adverts made by whoever, and typically there's always at least one advert that features spot colors, and therefore it would be very nice if the "All spots to process" feature actually worked as advertised without any required actions from me.
We stopped sending ads back to the advertisers for adjustments a long time ago, unless we absolutely had to, because there were so many things wrong with so many ads that it was simply too much work to write back and explain everything to people who most of the time didn't even understand what we were talking about. We found that it was usually a LOT faster and easier to just adapt the ads ourselves, as long as it was something that could be worked out really quickly from within InDesign itself, which pretty much included most typical errors.
But with this feature I find Adobe is trying to make my job harder rather than easier, and it's pissing me off. Arrrghh… ;-)

But It's not a preference it's a shortcut
It's a bad joke, is what it is. ;-)
So, why in your opinion should it be presented the way it is? I keep saying in it's current functionality it shouldn't be presented the way it is (and that: if it is, it shouldn't work the way it does). If it's not a preference or even a proper checkbox, why present it that way?
If you put it right next to the table at the top of the window (so that it's directly associated with that information, rather than information right above it) and just called the checkbox “Spot(s) to process” and had it only visually reflect the content of the sleected spot colors in the table, then I'd see your point with likening it to the “Hyphenate” checkbox.
If a story has two selected paragraphs that uses two different hyphenation settings then the checkbox should present the way it does now, but if you hit the checkbox so that both paragraphs now use hyphenation and create a third paragraph inbetween the two previous ones it better inherit that setting and not turn off hyphenation for the new paragraph (unless of course there's a defined next paragraph style that switches to a style with hyphenation turned off). And if that checkbox said “Hyphenate all paragraphs” instead, then I would expect it to do just that, and not just the selected ones, and not just the current paragraphs but quite literally all paragraphs even newly created ones – otherwise it doesn't do what it says it does, and simply shouldn't be labeled that way.
And seriously bad interface design aside, you'd have to rename “All spots to process” to “Switch all currently displayed spot swatches listed in the table above to process” to actually describe what that checkbox does. So even if you're a fan of the current functionality, as opposed to one that actually lets the user set and forget a setting like that, and think it's better that users manually check it repeatedly (which I'm not saying that you are, but you're not giving me any feedback suggesting you even see my point of view with any of this, so what do I know?), then why wouldn't you still support an interface that visually matches/signals that functionality better? If it's a “Select all” checkbox supplementing a table containing a column of checkboxes, then present it that way. Don't put it at the bottom of the window next to another checkbox that works just like a regular checkbox and label it “All spots to process” – because that way you are signalling a different behavior.
Seriously, if I was to do design using the same mentality that Adobe uses when designing their user interfaces it wouldn't be long before I lost all clients. There's a lot to be said for de facto monopolies, I suppose. Oh no, there's nothing wrong with the design, just as long as you accept it on it's own terms and don't compare it to anything relevant, and just as long as you give people enough time to understand and accept it … and surrender to it.
For real … I wouldn't win one single pitch that way.
Today's threads have in many ways been a thorough reminder of the following quote from the second link I provided:
Is there an Internet rule yet stating that even the most obviously indefensible mistake will eventually be defended by someone somewhere? Awful marketing efforts get explained as genius viral campaigns, broken features become solutions.
And whether or not you're able to see my point of view or not is really besides the point too.
The real point was, and remains to be:
That for those who receive lots of ads or other external files that may or may not contain spot colors it would be far more useful to be able to set a checkbox to always convert all spots to process when exporting, than the current functionality is (and I'm not suggesting eliminating the current functionality, just change so it's presented like what it really is, and then just let that separate checkbox do what it says) … causing unnecessary manual action on the user's behalf shouldn't be the business of Adobe – preventing it should.
And here's further reading on the subject of bad Adobe interface design for those who might feel so inclined. ;-)
Cheers!

My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial). They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient. I use Yahoo Mobile Mail. Help!

My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial). They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient. I use Yahoo Mobile Mail. Help! How can I change the settings so that the sent emails go back to Arial? Thank you!

I'm not sure if it's a Yahoo Mobile mail or an iphone issue... have asked the Yahoo forum but no replies yet... Any help appreciated!

Can ANYONE spot the memory leak??

Hi, I have some code here, and there is a SERIOUS memory leak. Basically, I realized the leak was there when a report tried to execute this 100,000+ times and it bogged the system down to a crawl. Can anyone spot the leak? I will explain the variables below the code:
char* getDescription(char* chFlag, char* chDEID, char* chKey, int keysize)
//first, we need to allocate new Byte arrays....
jbyteArray JchFlag = (*env1)->NewByteArray(env1,1);
jbyteArray JchDEID = (*env1)->NewByteArray(env1,2);
jbyteArray JchKey = (*env1)->NewByteArray(env1,40);
//next, we need to put the correct info in those byte arrays....
(*env1)->SetByteArrayRegion(env1,JchFlag,0,1,(jbyte*)chFlag); (*env1)->SetByteArrayRegion(env1,JchDEID,0,2,(jbyte*)chDEID); (*env1)->SetByteArrayRegion(env1,JchKey,0,40,(jbyte*)chKey);
getDescriptionID =(*env1)->GetMethodID(env1,myjclass,"getDescription","([B[B[BI)Ljava/lang/String;");
result              =(jstring)((*env1)->CallObjectMethod(env1,myjobject,getDescriptionID,JchFlag,JchDEID,JchKey,keysize)) ;
    returnvalue = NULL;
    if(result == NULL)
       strcpy(holder1, "**********Error Finding Description**********");
    else { //now, we convert the jstring to a char *, so we can return the proper type...
            returnvalue=(char*)((*env1)->GetStringUTFChars(env1,result,&isCopy)) ;
            strcpy(holder1,returnvalue);
            if(isCopy == JNI_TRUE)
                (*env1)->ReleaseStringUTFChars(env1,result,returnvalue);
(*env1)->DeleteLocalRef(env1,result);
return holder1;
//return description;
}//end getDescription function
-myjclass is global, it gets its value in the initialization.
-any variables that are not declared in this function are, of course, globally defined.

Hello Friends,
I had also tried to use the ReleaseStringUTFChars after making the check of whether it does a copy or not.
For me in Windows, it works fine most of the time. But when I go on increasing the no. of strings in a Vector of objects to more than 500 or something , then it occasionally fails.
Just before ReleaseStringUTF, I do have the copied string in char* .
Soon after Releasing, I do get a junk in the character array.
I dont know why it happens like this.
Please advice.
Everyone suggest ReleaseStringUTF.
But why it fails in Windows.
And any one know about how it will behave in Alpha.
It totally fails in Alpha.
I could not get the string at all.
Please help
LathaDhamo

Help making a Spot The Difference game

Hi!
Im pretty new at Actionscript 3.0 and I have to make a Spot The Difference game for school.. Now I followed a tutorial, but it's in AS 2.0 and I really cant get it to work in AS 3.0. Also, the tutorial isn't complete, so is there anyone that can help me any further with the code ?
Here's the tutorial I followed:
http://www.flashperfection.com/tutorial ... rence-Ga...
Thanks!

The link in the first post doesnt seem to work, so I hope it works now:
http://www.flashperfection.com/tutorials/Create-a-Spot-the-Difference-Game-63139.html
The code in the game Mc is:
var differences:Number = 3;
var found:Number = 0;
function addDifferences(thisSide, otherSide) {
for (var i = 1; i<=differences; i++) {
var difference = thisSide["dif"+i];
difference.useHandCursor = false;
difference.found = false;
difference.otherSide = otherSide["dif"+i];
difference.tabEnabled = false;
difference.onPress = function() {
if (!this.found) {
this.play();
this.otherSide.play();
this.found = true;
this.otherSide.found = true;
found++;
if (found == differences) {
found = 0;
levels.play();
and then on left side:
_parent._parent._parent.addDifferences(this, _parent.rightSide)
and on the right side:
_parent._parent._parent.addDifferences(this, _parent.leftSide)

Have 60 gig ipod classic will power up will go to songs but will not play any songs just sits there on 0 I can fast foreword but it still will not do a thing just sits at new spot in song help please.

Have 60 gig ipod classic will power up will go to songs but will not play any songs just sits there on 0 I can fast foreword but it still will not do a thing just sits at new spot in song and will not play , help please.

Update!
This is what I did to fix both the skipping songs problem and the iPod verifying forever & not able to restore problem (because of iTunes 9):
a) I used Disk Utility to reformat my iPod while in Disk Mode using the instructions here:
http://support.apple.com/kb/HT1363?viewlocale=en_US
and here:
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml#backup
b) Do not unplug your iPod after reformatting (mine showed up as a firewire disk) - simply launch iTunes ( I went back to 8.2) and follow the Restore instructions here:
http://support.apple.com/kb/HT1339
iPod is recognized, syncs and doesn't skip songs anymore after that miserable experience with iTunes 9!!!

Insert a clip into a new sequence, the clip will not play back

Macbookpro 8G ram twin 2.5 Intel, 1333 Mhz
I am an experienced editor coming over from AVID. This is my second project attempt in Premiere. First was fine. I imported clips that live on my hard drive. When I make a clip selection, mark the in and out and "insert into a new sequence, the sequence will not play back un less I render it first. I am talking about one (1) shot maybe 3 seconds long. I have done no other edits in the sequence and have added no effects but there is an effect icon on the clip in the sequence, This can't be right. It is not the way it worked for my first test project. It would take 40 hours to edit a 60 second spot… What has happened here?
Footage is 1080p 24fps. Short with a digital DSLR and Files are the same (.mov) as in the first project,

I have exactly the same problem. All of a sudden preview window is not working properly. In some projects it only plays audio with gray screen, in some it doesn't plays at all or plays audio from another projects. Sometimes preview gets frozen with the first frame in the project. I can however play video from Event Library, but without any sound. When I create new project and drag clips from Library, it plays with gray screen and again without sound. Restarting iMovie or Mac is no help. I'm using iMovie 8.0.6
Waiting for help desparatly, thank you

What to charge the client? I'm new to the field.

I hope this is the appropriate forum for this question. I just got a contract gig for a medium-sized corporation and am doing their email news letters and web page management and design. I'm using javascript and will be doing some Flash when I finish my training in it. What I can't figure out is the going rate for this kind of work.
Do you charge per hour or per project? They want to pay me $250 per email newsletter which takes me about 3 hours to do. I have no idea what to charge for the web page stuff. BTW I'm in the Silicon Valley area.

Thanks for all the replies. I was just sent an email from the marketing manager that asked if I could add a logo and some text to an existing page and link to a new page which I would create. So one new page and mods to an existing page. I was asked if this could be done for not more than $500. So I'm getting the idea that this a good price to be getting? Sorry if I confused anyone, I will be using Dreamweaver for everything which will be programming in javascript not java. Like I said, I'm a novice. I only got this gig because I have a friend who's a VP there and he liked my website. But I was told I was being hired because the previous contractor was charging more money. This is Silicon Valley here in California so I guess they pay more here than in other places? Do any of you professionals know what the average pay is? Is there a place to go to find out? I don't want to end up charging too much for my novice work only to be outbid by someone else down the road.

Spot the Community Manager Competition - CLUES Thr...

Hi everyone
This is our first clue in the Spot the Community Manager competition.
We’ll start with an easy one…
If you are on the front page of the community and click on the broadband tag you will get a list of posts that have been tagged with the word broadband. Find the post about broadband dropping when the user switches on their TV… you might spot me there! This is what you are looking for:
Remember to copy and paste the thread URL and send to me in a private message.
Full details and terms and conditions for the competition can be found here
Good Luck!
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Hi Everyone
It's our last clue today - make sure you use all the clues to find the pics to enter the competition!
In Clue 2 we mentioned sticky threads on the Vision board. There are sticky threads on every board – worth checking them out as they have help and advice on solving the most common queries we see.
For the final clue we will venture into the Phones board and find out what to do if you have trouble with your BT phone – check out the sticky threads here and you’ll find the last pic.
All the pictures will be removed at 10pm this evening so you need to look for them before then.
Remember to copy and paste the 5 thread URLs for every picture and send to me in a private message
Full details and terms and conditions for the competition can be found here
Happy Spotting!
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

White screen on my 3gs, i would like to spot the problem if it is a cable problem or an LCD problem?

after dismantling the iphone 3gs and reassmble it again i got a white screen, i would like to spot the problem if it is a cable problem or an LCD problem?

Steps for iPhone white screen, #1 Reset. If fixed done. If the screen becomes normal, but then again goes back to white screen, fix is new LCD Display. If remains continuous white screen after Reset, then the problem could be Logic Board or LCD Display, in this situation try a new LCD Display hoping it will fix issue, but will not if problem is Logic Board fault.
Before opening and during all repair of iPhone 3GS make sure it is OFF. This is why you now have a White Screen, try not to make that mistake again.

New to the WRT300N - Firmware & help needed

Hi. First off, I apologize that this is going to be very long. I really hope someone will take the time to read it all and give me some help.
I posted about a week ago about problems with my WRT54GS. All of a sudden with no changes, the wireless stopped working. I tried for a few days to fix it with no luck. I decided to order the WRT300N (I figured if I was going to buy a new one, I'd upgrade and this is the one that Linksys recommended).
I should mention that after ordering the new router, the wireless on the old one started working again but it wasn't working normal. The signal quality had always pretty much been excellent and now it started going up & down but at least it was staying connected.
The new router came today. I disconnected the old one and connected the new one and everything went smoothly. Both my wired & wireless computers worked great. Less than an hour later, the wireless disconnected. I went to view available networks and my network (I use our last name) was gone. I shut off the laptop and it still didn't see the network. So I started looking at the router settings just to be sure that nothing had changed. About 15 minutes later, the laptop found the network and connected again. The signal quality dropped to good and has stayed there ever since.
Just for information, when the laptop is on the desk (which it is 90% of the time), it's only about 5 feet away from the router. I have not tried to take the laptop out of the room yet. Also more information if it helps. I have a large "U" shaped desk. My monitor for my desktop sits in the middle. On either side are the speakers. To my left (in front of me) is a UPS (plugged into this UPS is the tower, monitor, speakers, cradle for my mouse, modem & router), then the tower (I can't put it on the floor because I have physical issues that would prevent me from accessing it there). Now if I turn my chair to the left, the desk has an upper level. This is where my DSL modem & the router are. They are on the end near where the computer is on the lower level. This is the same setup we were using before. Old router worked great for almost 2 years with signal strength at excellant on the laptop. It just started acting up all of a sudden. If I go back to facing center and then turn to the right, that's where my husband's laptop sits. The only other equipment there is a calculator and a lamp and on the floor is another UPS which has his laptop (which has an Intel wireless G card in it), a laser printer, and the above mentioned calculator & lamp plugged in.
Prior to today, I had the Logitech MX3100 keyboard & mouse set. I had purchased a new mouse (Logitech MX Revolution). So I was using the keyboard from the MX3100 with the new mouse and everything was fine running that way for weeks before the problem kicked in. So I don't think it's got anything to do with the mouse. Today's setup is a little different. I am no longer using the MX3100 keyboard. I am using Logitech DiNovo Edge, which uses a bluetooth dongle. I also don't think it's any interference from this keyboard since this is a pre-existing problem.
I do have a cordless phone in the room (it's on the left hand side of the desk from where I sit at the opposite end from the modem & router...also it's one of those that doesn't need a phone line)but it's a 5.8 ghz.
The old router had the option to change the channel, etc. This one has auto for standard channel & wide channel & there's no way to change it that I can see. Radio band is also set to auto but does have 2 choices under it (standard & wide). As I said before, I use our last name for our SSID. It's the same one I've been using for years. There is no one else around here with that SSID. Network mode is mixed.
Concerning the firmware....the information for mine is WRT300N V1.1 firmware v1.51.2. I tried to look for an update but the only one in the list is the WRT300N V1.0. I did click on that but the firmware version is lower and I don't want to screw anything up. Is there a firmware update for me or not? If so, please point me in the right direction as I can't find it.
Concerning the signal strength....would it help to buy a new wireless card for the laptop? The Intel card has been updated with the newest software. The card is internal and to my knowledge can only be replaced with the same card or a bluetooth card. (Computer is a Dell XPS M140.) I do have a card slot but I'm confused because I think Dell called it an Express Card slot and I don't know whether or not the Linksys notebook card that is recommended for this router would work in this slot. If the card would work, is it worth the expense?
What else can I try. I thought about moving the router furthur to the left but it would require moving a few other items and I'm not sure if the cords are long enough. Would it help if the router & modem were not plugged into the same UPS? I do have a regular surge protecter near where my phone is. I would really rather leave them plugged into the UPS though for obvious reasons.
Also if it helps, I have the router on it's side with the 2 antennas on the end pointing straight up and the flat one in the middle I have angled this way.
I hope I have given enough information for some suggestions.
Thanks,
Lisa

Thanks for the response. I was wondering if anyone would take the time to read such a long post. I wanted to be sure to try to give as much information as possible.
My desktop (Dell XPS400) tower is made out of metal...but the router is actually not sitting on it. There is a shelf to the left of my tower (when I'm facing it, otherwise it's to the right of it). That's where the modem & router sit. The shelf sits about 3" over from the edge of the computer and it's about 7" above it.
As far as the wireless card for my husband's laptop...I'm still thinking about it. I'm wondering if there would be any improvement in speed or the quality of the connection with the N card.
Now I just went into the router's settings and tried to make the changes you suggested. I was able to change the radio band from auto to wide BUT once I do that, I loose the ability to leave the wide channel & standard channels on auto. The options for the wide channel are 3-9 and the standard are 1 & 5. I don't know which ones are best to pick so for now I'm not changing anything. I didn't change the advanced settings either as I wasn't sure if I could do that without changing the other settings first.
My husband has noted that he does see the quality of the connection occasionally jump to excellant. For the most part it's staying on good in here. We haven't brought it out into the living room yet to see what it does out there. He hasn't needed to. He has had it disconnect on him a couple of times as well.
I did forgot to mention in that book I wrote that we do live in an apartment building. We are on the 1st floor in the back of the building. Our office is between our living room & another bedroom. There is an apartment above us. There is another apartment on the other side of the other bedroom. Our bathroom is across the hall from this room, other side of that is the kitchen and then there is an apartment in the front of the building. Our front door is off the living room, a hallway seperates our apartment from another one. There are 4 apartments on each floor. Laundry (directly under us) & storage in basement.
I give all these details to try to get the best help. I don't know if all this extra info is helpful or not. We have been using Linksys routers for quite a few years now. This is our 3rd one and our 2nd wireless one. We have been in this apartment for a year now and had no trouble until a few weeks ago. Previously lived in another apartment of the same floor plan in the same complex but on the 3rd floor (boy did we hate walking up those stairs!) with no trouble.
Looking forward to hearing back from you so I can try to make the changes you suggested.
Thanks,
Lisa

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

What is new in the iPod Touch 5?

Hello I was wondering what is going to be new in the iPod Touch 5? Thanks!

Apple has not yet made any announcement with regards to the 5G iPod Touch. It is against the erms of use of this forum to speculate on such things. Google if you want to see what others are speculating.

New "spot the replies"

Similar Messages

Maybe you are looking for