New Subscriber add in CM Cluster but agents are not logging in on IP Phones registered to new subscriber

Hi,
I have added a new subscriber to existing cluster in Contact Center Environment. Agents are unable to login the CTI application using the phones registered on new subscriber. Call Manager version is 7.0.2 and ICM version is 7.5.8.
Please advise.
Regards,
Hammad.

Is the CTI Manager running on the new subscriber?
What do you see in the .ems file for the JTAPI gateway?
Are the phones still associated with the JTAPI user?
If you unassociate and reassociate a phone, does that work?
Regards,
Geoff

Similar Messages

HT204150 I can't get my contacts back on my phone from my icloud. It's up and running and I have already turned on the contacts. The icloud online shows that I still have all of my contacts but they are not popping up on my phone.

I had my mom on my icloud through a different phone for the longest time and just took it off her phone today. Now all of my contacts have been erased from my phone. I went on the icloud online and it is showing that my contacts are still there, but they are not on my phone. I need help!!!

Go to Settings>iCloud and confirm that you are signed into the account that contains you conacts and that the contacts setting is turned on. Also open the contacts app and tap Groups (if you have this setting at the top) and make sure all your contacts groups are checked.
If they still don't appear, go to Settings>iCloud, turn Contacts off, choose Delete from My iPhone when prompted (they will still be in iCloud), then turn Contacts on again.
If they still don't appear, force-close the Contacts app and reset your phone: double-tap the home button, locate Contacts, swipe up on the image above the app icon to close it, tap the home button again. Then hold the power and home buttons at the same time until you see the Apple logo, then release and wait for it to restart. Then check your contacts again.

I am receiving iMessages on my updated macbook air, but they are not showing up on my phone.

I am receiving text messages just fine on my iphone, but when I get home and open the laptop I find multiple imessages from various people throughout the day. I do have imessage turned "on" on my phone and am using wifi most of the time. Why are they going to my computer and not my phone?

Do you have both your phone number and email in"send and receive" on both?

The podcasts that I have subscribed to via itunes have stopped downloading/syncing. I see new podcasts on the podcasts website but they are not listed on my list of itunes podcasts, nor do they show up when I sync to an iPod

the podcasts that I have subscribed to via itunes have stopped downloading/syncing. I see new podcasts on the podcasts website but they are not listed on my list of itunes podcasts, nor do they show up when I sync to an iPod. any ideas, thanks joanlvh

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Check out the following KB Articles: http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
Karunakar

Hi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban

The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Dis

Does anyone know what is this mean and how to fix this?
I checked the records and they are not being replicated, and the connection to the subscriber are not active for some reason; but I don't know how to fix it.
Thanks
Philly Database developer

It basically means that the replication agent has not logged a status message back to the replication subsystem.
Basically you can't stop it, and these messages let you know if the agent has hung.
However you can delay the time before the subsystem will report this message. Do this by the following query - this will delay this message to 10 minutes from the default of 5 minutes. I have set this to days when replicating over ISDN/Phone lines.
USE master
exec sp_changedistributor_property
@property = N'heartbeat_interval',
@value = 10;
GO
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941
after changes below query...USE master
exec sp_changedistributor_property
@property = N'heartbeat_interval',
@value = 10;
GO still not working...

The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber,

Hello Everyone,
Suddnly stop merge replication. transaction cannot replicated from publiser to sunscriber.
I tried to set heartbeat_interval= 5 but still not working..
The replication agent has not logged a progress message in 5 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor
are still active.
What is the problem with merge replication and why this erroe comes..
any solution of this error or reconfigure merge replication?
please give me a solution

Run profiler on the subscriber to see what the merge agent is doing there. It is possible that there is some blocking that is causing the agent to hang. You might want to set the heartbeat to 10 or higher. The default is IIRC 5.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

I bought 20 new songs in the ITunes store but they are not in my IPOD after synching?

I bought 20 new songs in the ITunes store but they are not in my IPOD after synching?

I'm having this same problem and can't find a solution that works in the apple support community. What's frustrating is that this used to work seamlessly with Windows. Then I bought a macbook pro and upgraded to OS X Mavericks and a lot of stuff broke.
I'll call apple in the morning.

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

Have you rebooted your home router?

I am adding new photos to my PC windows 7 desktop but they are not syncing to my ipad. how can i get these photos to sync

I am adding new photos to my PC windows 7 desktop but they are not syncing to my ipad when I sync the Ipad. How can I get these photos into my Ipad?

Skydiver.
you and I know that your answer works because that is how I sync my ipad. I don't have a mac, just a PC with itunes. Now this guy might not even have itunes and is using Windows Media Player or something like that.
Or maybe he just do not want his problem fixed. I read these forums and too many of the questions are just way beyond basic computer knowledge, but it seems to happen that they can never resolve a very simple problem. It makes me wonder if people just post bogus stuff.
I would like to see registration to the forums attached to the product serial number of the forum you are posting to. I bet you that the posts would drop dramatically.

Can dld newer versions of Frfx but they are not getting installed?

I am able to dld newer versions of firefox but they are not getting installed ... Currently 'about firefox' shows my version to be 27.0.1 but when I go into the troubleshooting option it shows I have version 28.0 and 29.0 in my update history. Please advise. Thanks

Hi Irishman,
Have a go at the suggestions that follow and then post back with how you get on.
Obviously I have seen your post, and sorry you are having problems. Unfortunately this is likely to be because you did not take enough care on the Internet. It is all too easy to go to bad websites and pick up malware that once downloaded does things you may not like or expect.
Explanation 
'''This is not anything to do with Mozilla Firefox''', other than it is the browser in use. Such software is not bundled with or downloaded with Firefox installs or upgrades. ( You may get an option of thumbnails in otherwise blank spaces in newtabs in a version of Firefox later this year but that is a different subject)
Finding such adware may be problematic, after all it is either downright malware which will try its best to evade being found and uninstalled, or it is adware that a minority of people actually like and deliberately download and install, usually after clicking small print saying this will happen.
Suggestions to try to Uninstall or Remove Adware
First thing to try, check which search engine is selected ? Because this is so simple and could have an effect it is worth checking what Search engine is selected for the Firefox Searchbar. You may have changed that, or software may have,and that will affect other searches including those from the address bar and the start page. All you need to do is click the little downward pointing arrowhead in the search bar and check what is in use and what is available. In most countries Firefox uses Google by default.
Check the shortcut Icons - has an address been added ? Right click the icon on the desktop used to start Firefox has an address been tacked on to the end of that. If something has changed that Firefox goes to that address as it starts up. For comparison use a run command directly. In Windows & with Firefox not already open Use keyboard shortcut Winkey+Run then when you get the run option key in ''firefox.exe'' & hit return. That will run Firefox without any extra instruction.
Adware removal 
I you have got adware, or unwanted software especially if it also affects other browsers (So check the use of Internet Explorer) look for anything unexpected installed in the Windows OS, use the Windows Control Panel. especially if only Firefox is affected check what is installed as extensions and plugins by using the addons manager.
* USE '''New button -> Addons ''' Or navigate to ''about:addons'' ,by keying that into the addressbar
* Also see
** [[Remove a toolbar that has taken over your Firefox search or home page]]
**And this slightly dated article [[What to do when searches take you to the wrong search website]]
I will make a follow on post detailing malware removal steps. Note it is important to use up to date and multiple tools, not just your one favourite. No single tool detects everything. This one is particularly useful with adware problems
* * '''[http://www.bleepingcomputer.com/download/adwcleaner/ AdwCleaner: (for adware)]'''

I have a 27" IMac. I want to add additional monitors to it. There is a vga slot for the first monitor. I would like to add a second monitor but there is not another via slot. Is there an adapter I can get for via to usb?

I have a 27" IMac. I want to add additional monitors to it. There is a vga slot for the first monitor. I would like to add a second monitor but there is not another vga slot. Is there an adapter I can get for vga to usb?

Here's the problem I am trying to research for you...
There does exist a way to add a second monitor via USB:
USB 2.0 to HDMI Audio Video 1080P Adapter for Windows and Macbook
It's the only device I know of that can do that. The problem is that it wants a HDMI connection. So that means a HDMI-to-VGA adapter or converter needs to be found (not VGA-to-HDMI, those are easier to find).
Interesting article realted to this:
Hdmi to vga adapter
Maybe somthing like this converter will work.

The agents are not getting determined

Hi Gurus,
In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
Below are the steps followed:
We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

Hi,
Kindly Diagnose your WF:-
Use the following transaction:-
1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
2> SWEL -> DISPLAY EVENT TRACE
3> SWUD -> WF DIAGNOSTICS
4> SWPR -> WORKFLOW RESTART AFTER ERROR
Enter the WF Number and Click on the LOG Icon.
There you can see the Graphical Log of the WF to know where the WF is stuck.
And You can also check the Technical Details of the WF there, to find which WF Container has what value.
In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
Kindly check and revert back, so that a solution can be provided.
Regards,
Kanika

My ipod touch 4 gen is showing headphones in but they are not

My ipod touch 4 gen is showing headphones in but they are not.plz help me

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Can't accept BBM invitations and Invites sent show as "Pending for Authorization" but recipients are not receiving them either (PIN Message Status : Service Blocked)

I recenly changed device from BB Curve 8530 to BB Bold 9900 and ever since then can't accept BBM invitations and Invites sent shows only as "Pending for Authorization" but recipients are not receiving them either. Tried sending PIN messages but I got a red x next to the message and the status says: "Service Blocked" .
When my phone got lost, I was lucky that I just synchronized my device to my BB Desktop. Not only was I able to retrieve my contacts (phonebooks and BBM) but also ALL txt msgs and even call logs
Anway, that happening, I assumed I don't need to re-send all my BBM friends invites since some were able to communicate with me. But for those who have deleted my profile (knowing it got lost) and were still on my contact were the ones affected. I tried deleting them and sent an invite only to find out that: I can't accept BBM invitations and Invites sent shows as "Pending for Authorization" but recipients are not receiving any. (they also have the same pending for authorization notice on their end)
When I tried to send them a PIN message I get a red x next to the message nd get the service blocked message.
Help I do not know what else to do.
** FYI: new contacts added with my new PIN have no prob sending invites and me accepting them all.

Hello Lhea,
This issue is most likely Caused by the BlackBerry not being provisioned for BlackBerry Data Services.
Please have a look at the following article that covers "Service Blocked" when sending a PIN message:
http://btsc.webapps.blackberry.com/btsc/KB19244
I hope this helps.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

New Subscriber add in CM Cluster but agents are not logging in on IP Phones registered to new subscriber

Similar Messages

Maybe you are looking for