New to SCOM need assistance setting up an Alert / Monitor

I've recently deployed SCOM 2012R2 to accompany our SCCM deployment and to replace other monitoring software. I'm having difficulty figuring out how to create a monitor that will alert us when a logical drive falls below a specified value of free megabytes.
I'm having difficulty in finding documentation that will help me do the following:
We have a 2 node cluster with a 5GB drive (X:) we use as a mounting drive to mount larger disks within as spanned volumes.  We need to have a monitor in place so that we know when these drives are reaching the end of their capacity and we need to bring
a new one online.  The volumes being mounted here are approximately 2.4TB each.  The monitors we want in place are for if the disk has less than 20GB, 15GB, 10GB, 5GB, 1GB, & 512MB ... so I am looking at 6 alerts total for one disk.
Once a disk fills up it we stop all write actions to it and start using the new one, so I also need to stop/prevent any space monitoring on disks not currently being written to.
Any assistance greatly appreciated!
# When I wrote this script only God and I knew what I was doing. # Now, only God Knows!

Hi There,
You can create a basic Simple threshold unit monitor. Target the monitor to "Windows server operating system" with the below configuration as per your screenshot.
The below setup will do good for Space below 20GB.
This setup will work if your instance remains same "X:\IMGWH29-33" same all the time in all the machines in which you want this alert.
So what i have mentioned is for the below X:\ Drive throw a alert if the disk space goes below 20 GB.
And as the Permfon is collecting data in MB and not in GB hence i have mentioned threshold as 20000 so if the space goes less than 20000 MB (20 gb) throw me an alert.
Threshold settings Under threshold is critical i.e If it is below 20 Gb throw me an alert, If it is above 20 Gb dont throw me an alert.
Hope this helps. Also confirm if the instance name  "X:\IMGWH29-33" remains same all the time or not.
Gautam.75801

Similar Messages

  • Hi, I need assistance setting my Blackberry 8310 up t...

    Hi,I need assistance setting my Blackberry 8310 up to be a modem for a laptop via usb. I'm currently using XP. My service provider is (removed personalinformation) 
    Message Edited by thundergeek on 07-16-2009 10:39 AM

    Hi there!
    Please see these KB's for instructions:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB04664&slic...
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB05196&slic...
    If that does not work, then please come to:
    http://supportforums.blackberry.com/rim/
    and register an account. Then post to the applicable forum.
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • We just purchased a new computer and need to set up Itunes on it for the 3 members of our family.  What is the best way to go about that?

    We have just purchased a new home computer and need to set up I-Tunes for everyone in our family.  Is that possible to do on one computer?

    To have  EVERYTHING  as it is Now...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751
    An Added Bonus is that you will have a Backup of iTunes.

  • New iPhone user needs guidance setting up 4 iPhones for family - best approach?

    Hi - I'm a new iPhone user tasked with setting up 4 iPhones for family (three 4S, one 3GS). I set up the first 4S using my mother's existing Apple ID (she has an iPad) and I think (hope) hers is fine. When I set up my father's phone, my sister said to enter my mother's Apple ID during setup since they wanted to use a single Apple ID for iTunes purchases. The setup screen I'm referring to the 7th screen into the setup process for a new iPhone 4S (after the Welcome, Language, Country/Region, Location Services, Wi-Fi Networks, and Set Up iPhone screens), where it asks you to "Sign In with an Apple ID" or "Create a Free Apple ID". This screen was where I entered my mother's Apple ID into my father's phone.
    By entering my mother's Apple ID on my father's phone at this point during setup, I seem to have created a "clone" of her phone - their phone numbers are distinct and they can call each other but iMessages sent to either of them initially appeared on BOTH phones. I think I have now fixed that by creating a separate Apple ID for my father after the fact and entering it under Settings>Messages. Thinking I could also enter his new Apple ID under Settings>iCloud, I found I could not change it from my mother's Apple ID (it's greyed out). I saw a recommendation in another post to click on the red "Delete Account" button at the bottom, but will that delete my mother's entire account or only its association with my father's phone?
    Backing up a step or two, I'm worried that at this point I should have entered/created a new Apple ID on screen #7 during initial setup of my father's phone (instead of entering my mother's Apple ID), and that just changing settings in iMessage, iCloud, etc. won't really fix any problem(s) I've created. I hesitate to set up the other two phones before knowing how badly I've already messed things up with this one.
    During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
    If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?
    Without knowing what might be the best way to set up these 4 new iPhones, I was thinking the four unique users of these new phones would most likely want to share apps (by purchasing them with one Apple ID), backup/synch to one computer, but maintain separate iCloud accounts so everyone's info is private? I've spent time reading other posts and see so many different recommendations for families with multiple devices that my head is spinning. Many include questions from folks migrating from older phones or MobileMe. I think my situation is simpler in that there are 4 new iphones and one existing Apple ID. Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists? Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases? Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
    So sorry to have to ask such basic questions. Many thanks, in advance, for any guidance provided to help me not make any (more?) mistakes during setup that will be a real headache to remedy later, once everyone has started using their phones.

    Hi edgefield,sorry you're having so much trouble.
    FIRST CREATE A BACKUP ON YOUR COMPUTER -ALWAYS BEFORE PLAYING WITH THE INFORMATION ON THE PHONES (it prevents losses)
    Now I'll answer your questions)
    During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
    Yes.  Create his own apple id and sign him in.  then tap settings ->store -> tap on the account name -> sign out.
    Then sign in your fathers apple id.  (create your fathers apple id on the computer, its much easier, trust me).
    If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?##
    No.  Tap settings -> icloud, and turn everything off (keep on the phone option).  Then DELETE ACCOUNT (it's got red around it and at the bottom of the screen if you scroll down).  You cannot sign out of iCloud, you can only delete the account.  Then clean up the contacts and information on the phone. 
    Then you tap settings -> iCloud and sign in.  Put your fathers apple id in the section.  His information will be uploaded to www.icloud.com.  Then go to www.icloud.com and sign in with his apple id.  Make sure his information is uploaded (you'll have to select timezone and such). 
    From that point you are fine except for iMessage.
    For iMessage to function properly, only one apple id can be signed into the iTunes store (settings -> store).  If they are both signed into the same apple id on the iTunes store, than you need to turn off iMessage on one of the phones.  The iMessage may be delievered to either phone when both are signed in under the same apple id in the iTunes store.
    tap settings -> messages -> imessage off 
    This also disables facetime.  If you want them to have iMessage and Facetime, they have to have seperate apple id's signed into the iTunes store.
    Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists?
    Not that I've seen, will consider creating one if I have time.
    Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases?
    Your best bet is to create each apple id on the computer (keyboards are easier to use) and then sign them each in during the creation process.  Then change the iTunes store info to the stored apple id.
    This will allow each person to serpate iClouds without interfering with each others Cloud as you set up new devices.
    Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
    Doing it this way can cause problems (or used to, not sure if it still does), initially, when you set it up, it wants to create a backup or upload the blank info to iCloud.  You are better off setting up their own apple id first and signing in with that, and then changing it in the iTunes store.
    I'm off to bed, I'll check this thread tomorrow and see if you have any more questions/problems.  Remember, always create a back-up before you do anything.

  • I got a new computer and have reinstalled Dreamweaver.  I don't need to set up a new site, just need to set up reinstalled Dreamweaver to manage the old site on the company server. Does anyone have a step by step walkthrough for doing this?

    The site files are on our server and I can still access them.  I was not the one who installed and set up Dreamweaver initially and don't know very much about the program  Just enough to manage our simple site and keep it updated.  Just need help setting it up so that it's back to managing our website. 

    Go to Site > New Site and define your site.  See screenshots:
    Servers:  Enter your FTP log-in credentials and remote server's root directory.  If unsure, check with your hosting provider for details. 
    Click on TEST button.  If you're unable to connect, click the More Options triangle.
    Nancy O.

  • I've got a new iPad and need to set up my apple and icloud account. I seem to have a problem when feeling in the Accounts part where it I need to to fill in the details of my residence. I live in Zambia and among the countries listed , Zambia is not

    I recently bought  a new iPad. When setting up Apple Account,the accounts details where I need to provide details of payment ,I have a challenge with info. Needed as ZIP,ADDRESS,PHONE NUMBER. This is so because my country Zambia is not among the many listed. Kindly advise

    If the ID is yours but you don't know the password, you'll have to reset it (http://support.apple.com/kb/HT5787).  If the ID belongs to a previous ownder of the phone, you'll have to either get the ID and password from them, or have them erase the phone and remove it from their account as explained here: http://support.apple.com/kb/TS4515.

  • New to VLAN - needs assistance

    Hi Guys,
    I just want to ask how to configure the router to connect to VLANs together.
    Please bear with me because I am new to VLANs and Cisco devices and only
    familiar with GUI config not the CLI/IOS.
    SWITCH 1 SG200 50-50 IP:192.168.1.250
    VLAN 10 = PORT 1-20 ACCESS MODE
    SWITCH 2 SG200 50-50 IP:192.168.1.251
    VLAN 10 = PORT 1-20 ACCESS MODE
    They said I would need a router to let these vlans connect to each other so we
    bought the Cisco SA 520 router. So from the router where should I start to connect
    vlan 10 on switch 1 and vlan 10 switch 2?
    I know this is simple to you guys but please show me the initial configuratioin
    and I will try to do the rest of it.
    Many thanks.

    Hi Sunil,
    Our school has plenty of students and staff.
    We are planning to segregate the students machines to staff machines plus the new voip and the servers as well.
    So the school director suggested to use VLAN and use Cisco switches.
    Network Plan:
    Router: Cisco SA 520 router
    We are all connected in 1 Domain and just want to segregate traffic.
    SWITCH 1 SG200 50-50 IP:192.168.1.250
    VLAN 10 = PORT 1-10 ACCESS MODE (This is for the Servers & Printers)
    VLAN 20 = PORT 11-48 ACCESS MODE (for the Staff)
    SWITCH 2 SG200 50-50 IP:192.168.1.251
    VLAN 30 = PORT 1-20 ACCESS MODE (for the IP Phones) VOICE
    VLAN 40 = PORT 21-48 ACCESS MODE (for Students)
    Please bear with me because I am new to cisco devices and work only on GUI.
    So I just need some simple tutorial let say if I want:
    1. VLAN20 (staff) can access VLAN 10 (servers)
    2. VLAN 40 (student) can access VLAN10 (servers)
    3. VLAN 40 (student) can access only let say port 1-3 in VLAN 10
    4. VLAN 20 and VLAN40 should not have an access.
    To help myself as well, I am reading documents about VLANs and trying to understand its configuration
    but since we need to setup this soon, I have asked an assistance here.
    Hope for your assistance.
    Many Thanks.

  • Wirelss G Broadband Router - Moved and got a new computer. Need to set it up but..

    I have a Wireless G Broadband Router. I have moved, I also have a new laptop and don't have access to the old one any longer. To make it even more challenging I have packed away the old password and login information in a storage unit I can not access. Trying to get the router set up again so I can work and my husband can work. HELP!. I run the steps and it goes fine until the Step 4/4 which says plug the wirless router cord into the electrical outlet on the wall..then it says waiting for router. During this time my computer bounces from internet access to no internet access to internet access and back again. then says it failed. Says the it appears that the ethernet is not connected properly.
    Solved!
    Go to Solution.

    This is how to access what I like to call the GUI: Access GUI
    This is how you'll change the name and password of the wireless network: Wireless Setup
    And this is how you change the default password used to access the router's GUI: Change GUI Password
    I highly recommend WPA2 personal security for the wireless network, NOT the insecure WEP. 
    If you need more help just ask, but here's a knowledge Base that you can use too. 
    I don't work for Cisco. I'm just here to help.

  • Just bought new time capsule- need help setting up WiFi network with another router

    Here ismy situation.
    I had a wireless network setup up at home using a Belkin wifi router.
    I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port.  In addition, I have a Verizon wireless network extender plugged in by ethernet.  All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
    The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it.  All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
    I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
    Needless to say, this did not work well. I called  AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router.  The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal). 
    If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
    What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID  to another stronger signal SSID as we move through the house
    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.

    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.
    OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
    Naming rule for wireless.. Same SSID same security different channel.
    SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
    Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
    Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
    Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

  • I need assistance setting up a classroom network

    I have an Apple Lab in my room, have been using a cobbled together network and now need to establish a solid network protocol and get my lab working fully.
    Computers in use:
         iMac's (17, various generations)
         Powerbooks (4)
         Macbook (1)
         MacPro desktop (1)
              LaCie 10TB storage
              Pegasus R4 3TB storage
         I have an ethernet wired network connecting all computers, manually assigned IP addresses...what I would like to do is use the network for more than just a platform for Remote Desktop...I'd like to utilize it to the fullest - allowing all machines access to the storage devices (hooked to the MacPro via Thunderbolt) and working in my Tri-Caster 410 switcher (a NewTek product that can handle duel ethernet connections, one to the school's network and one to my network). so that our file transfer is not tennis-shoe transfer and we can use the storage devices as entire class storage devices.
         All the parts are there, I just need to know how to make the connections and how to set up a pathway through the MacPro to the storage devices that won't allow complete access to that computer...
    many thanks
    Bryan

    Hi Bryan,
    I think this mostly depends on how you setup File Sharing on Mac Pro, & the Permissions/users you setup, but first...
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Also, what are the IP Ranges on the dual Ethernet connections?

  • Hi, i'm new to java. need help setting the path in win XP

    hi all,
    i'm new to java technology. i've just downloaded the JDK and ran my first java program (hello world). i love it. java's gr8. i need help. i run win XP and how can i setup the path sothat i can execute my programs from the root dir??? any help in this direction will be greatly appreciated. please email me @ [email protected]
    Best regards
    Mrinal

    Go to Start menu and select Control Panel. In the Control Panel, double click on System. In the System dialogue, choose the Advanced tab. Then click on Environmental Variables. Select Path and Edit. Put ;c:\j2sdk1.4.0\bin at the end of the Path (or c:\j2sdk1.4.0\bin;) at the start of the Path. That's it.

  • New to B2B - Need assistance for Starting programing in B2B

    Hi,
    I'm New to B2B. Anybody have links how to start programming in B2B. Prerequisites and how to download them. Currently im able to open b2bconsole.
    I need how to start programming. Any links plz...

    Oracle B2B is not a programming language or a programming based tool. It's a configuration based tool. All the standards have been already implemented as part of the product. You need to just configure it as per your need and you will be good to go.
    Please refer B2B user guide for detailed information about the product and it's offerings -
    http://docs.oracle.com/cd/E23943_01/user.1111/e10229/toc.htm
    Ready-to-use samples are available here -
    http://java.net/projects/oraclesoasuite11g/pages/B2B
    Tutorials are available at OTN B2B Home Page -
    http://www.oracle.com/technetwork/middleware/b2b-integrations/overview/index.html
    B2B product development team's blog is here -
    https://blogs.oracle.com/oracleb2bgurus/
    Regards,
    Anuj

  • New device. Need help setting it up! tks.

    Hi, I just got an unlocked BB Curve 8520.
    My idea is to set it up to be used with multiple carries, instead of only one. Is that possible?
    If it is, can someone help me with the email, contacts and calendar set up process?
    I was told I did not need blackberry service from my phone companies. I travel a lot, and I usually like to buy a prepaid (with data service) sim card in the country I'm in, so I do not have to pay for all these int'l roaming charges.....
    I have sim cards from Brazil, France, UK, and Switzerland. I used to have an HTC phone (windows OS) tha worked perfectly, but it died on me, so I need a replacement. Could the BB be it?
    Thank you all for your help!
    Rodrigo.

    Please don't post your question multiple times in multiple forums. 
    You were "told" incorrectly.
    If you want email and data on the BB you MUST subscribe to a BlackBerry data plan.  Once the email is setup on a carrier's data plan then you can't pop in another sim card with a BB data plan and get that email.  The email setup is tied to both the sim AND the pin of the BlackBerry.
    If you're not worried about data/email then it's no problem, you can pop in sim cards as you please.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Just bought new Time Capsule, need help setting up...

    Okay so I already have my wireless network set up in my house with two airport expresses, I have the airplay and wireless printer set up as well. 
    Just bought a time capsule today and want to know the best way to set it up.  Is it best to use the TC as the "main" wireless router, connected to my cable modem?  Is it harder to set it up this way, am I going to have to hard connect the printer to set it up with the Time capsule? 
    Thanks

    Hi,
    Personally, I would always use the AirPort device that provides the fastest wireless performance to create my main wireless network.
    If you bought a Time Capsule 4th Generation, http://support.apple.com/kb/SP627 chances are high that it is the fastest device you own.
    I would set it as "Create a wireless network" and set the two AirPort Expresses as "Join a wireless network" or "Extend a wireless network".
    Enjoy your new device !
    P-

  • [865PE/G Neo2 Series] Need assistance setting up lm_sensors (2.9.1)

    I need some help setting up lm_sensors. At present I have the following results of running sensors.
    As it can be seen the values plus the  minimum and maximum values for readings are not correct.
    For example +12V reads 2.80V
    w83627thf-isa-0290
    Adapter: ISA adapter
    VCore:     +1.37 V  (min =  +1.31 V, max =  +1.44 V)
    +12V:      +2.80 V  (min = +10.82 V, max = +13.19 V)
    +3.3V:     +3.12 V  (min =  +3.14 V, max =  +3.47 V)       ALARM
    +5V:       +4.88 V  (min =  +4.75 V, max =  +5.25 V)
    -12V:     -14.91 V  (min = -10.80 V, max = -13.18 V)
    V5SB:      +4.95 V  (min =  +4.76 V, max =  +5.24 V)
    VBat:      +2.99 V  (min =  +2.40 V, max =  +3.60 V)
    CPU Fan:  2743 RPM  (min =   -1 RPM, div = 2)
    M/B Temp:    +38 C  (high =   +44 C, hyst =    +0 C)   sensor = thermistor     
    CPU Temp:  +46.5 C  (high =  +120 C, hyst =  +115 C)   sensor = diode         
    vid:      +1.375 V  (VRM Version 9.0)
    alarms:   Chassis intrusion detection                      ALARM
    beep_enable:
              Sound alarm disabled
    eeprom-i2c-0-52
    Adapter: SMBus I801 adapter at 0c00
    Memory type:            DDR SDRAM DIMM
    Memory size (MB):       256
    eeprom-i2c-0-50
    Adapter: SMBus I801 adapter at 0c00
    Memory type:            DDR SDRAM DIMM
    Memory size (MB):       256

    could'nt find any real clue's it was running linux 
    anyways, i dont know what u are using that pc for, else instal windows will solve the problem of not being able to instal speedfan 

Maybe you are looking for