New toy called GUMSTIX

Hi Folks! I've just received a new toy from Santa Claus for a R&D project that will start next year. The item is a AM300 EPD Prototype Kit from E-ink (www.eink.com) running of a Gumstix Verdex XM4-bt board. Has someone already experienced LV running on gumstix?
Thanks in advance,
Pietro

Pietro,
We actually have LabVIEW Microprocessor SDK ported on Gumstix here in UCLA for several research projects.
As Michael mentioned, cross-compiling the GNU tools for Cygwin can be a very frustrating task and the results may varies on different computers.
For the starters, you may want to use the pre-built GNU tools for Cygwin. I found one from TomTom (they actually use Linux on their products, so they have to make their source codes and toolchains freely available). Their GCC version is a bit old (3.3.4), but hey, it's free and it does the tricks
http://www.tomtom.com/page.php?Page=gpl
After getting the toolchain installed, all you have to do is take the UNIX console target as a template, and cross-compile the run-time libraries for LabVIEW Microprocessor SDK.
You may contact me if you are interested, I may able to find a way to make the Gumstix target support package available for download in some form.
Tim

Similar Messages

  • I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". What am I doing wrong?

    I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". Wha am I doing wrong??

    never mind.  i think it just makes you review the information -- it looks like you have to click through everything.

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work". can anyone help

    How can we open a new folder in the email account (ex: need to save certain emails into a new fodder called "work".
    Anyone can help?

    Right click on any folder in mail and select Create new mailbox.

  • How to add new system call in solaris ?

    Hi,
    I want to add new system call in solaris. please inform me steps for adding new system call in solaris.
    Thanks in advance,
    Mahantesh.

    Here's a Solaris 7 example I know there are others ...
    http://access1.sun.com/cgi-bin/rinfo2html?267899.faq
    I haven't seen a good example of how to support both the 32 and 63-bit environment.

  • Firefox opens a new window called "shortcut to ...." at random times

    Hi all
    I've found over the pass few days that at random times when firefox is open, it opens a new window called "Shortcut to .....". i cant see the new window tho can see it from the bottom windows bar
    Any one else seen this?
    Thanks

    You may have set a download action to open a link in Firefox instead of to an external program.
    Try to delete the mimeTypes.rdf file in the Firefox Profile Folder to reset all file actions.
    *http://kb.mozillazine.org/mimeTypes.rdf
    *http://kb.mozillazine.org/File_types_and_download_actions#Resetting_download_actions
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder

  • New toy and I'm lovin' it.

    I had decided to get back to doing some personal still photography and proceed for a bit recently untill I hit a major hurdle.
    Printing exhibition quality "art photos" (esp. B/W) from digital source was a stumbling block ..
    Very expensive and no control of my images in the process..
    Then ...I decided to buy my self a printer.
    Did some homework (all of 2 days worth) and decide on an Epson R2880 stylus printer.
    I am so enjoying printing extremely high quality images with this printer.  Totally awesome.
    The quality that can be achieved with archive ink and paper is outstanding.
    B/W and color ...both incredibly saturated and banding free.
    Doing a little exercise by photographing RAW and viewing as B/W as I take the shot ...then post processing in Photoshop to bring back varying degrees of color saturation from the RAW data.    Study in grey scale then colorising.  RAW is simply amazing.
    I'm livin' the dream again and have interest from someone wishing to sell / hang my prints already.
    BTW- had a long weekend staying at a vineyard where I was able to take some great images and drink some great wine.
    I have been printing these out like there is no tomorrow.
    Bill : http://www.blackbarn.com/   The Hawkes Bay is a must when you decide to vist N.Z

    Congratulations with a new "toy"
    It IS a LOT of fun printing nice pictures,and have all the control yourself. Not so fun to buy ink though
    Talking about ink, your printer is not an office machine, so stick to original ink.
    Two questions:
    - Do you let the printer manage the colors, or do you use the papers own ICC profile and let Photoshop (or Qimage) control colors?
    (Not talking about chosing the right paper type in the printer settings)
    - Have you tried Hahnemühle paper?
    (It's expensive, and with using that paper one should download profiles for it)
    Dag
    BTW: Everybody should compose in B/W, then the colors won't hide bad compositions.

  • I have an iphone 4 and downloaded my first movie (hd) onto my PC (windows 7) I have not been able to figure out how to transfer the move to my iphone. The movie is in a new tab called "rented" not under the "movie" tab.

    I have an iphone 4 and downloaded my first movie (hd) onto my PC (windows 7) I have not been able to figure out how to transfer the move to my iphone. The movie is in a new tab called "rented" not under the "movie" tab. All of the support I have read talks about the movie being in the "movies" tab. I cannot use the "move" function or the "transfer" function because they are not available. Is this an issue because I just updated to the newest software?

    In order to download to your phone over the air, you need to be connected to WiFi.
    It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
    You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

  • New worm, called OSX.Inqtana.A

    Sorry, I'm not sure if I'm posting in the right place.
    I'm not finding any info on Apple site about this
    new worm, called OSX.Inqtana.
    That I just saw on yahoo.
    It mainly effects bluetooth macs, and my G5 is that.
    Any word I what I can do to shore-up my iMac?
    Thanks All!
    Stu

    Here's a little.
    http://www.macworld.com/news/2006/02/17/inqtana/index.php

  • Adobe Premiere Elements 13 comes with a new tab called eLive. Where is it?

      Where is it?`
    Adobe Premiere Elements 13 comes with a new tab called eLive..

    AxCxS12
    Thanks for the reply.
    The availability of Elements Online features can sometimes be country dependant. But, I had not run into any mention of that for
    eLive (Elements Live), the new feature in Premiere Elements 13.
    I will have to look deeper into that. If you get any information on this from Adobe in your country, please let us know.
    Best wishes
    ATR

  • Why my new 4s call out and my friends can not hear me?

    why my new 4s call out and my friends can not hear me?

    Sounds like your microphone might be busted.  Test it by doing a voice memo. If this is the case you should take it to your service provider/carrier/nearest apple store to have it looked at.
    Alternatively, try using headphones or a bluetooth headset. These are all steps to make sure it's not the mic that's damaged.

  • Is it possible to save an Event and the informations attached to his medias (favorites, Keywords, Notes) on an external disk where I saved the first version of this Event, without re-copying the all medias on a new Event called fcp1?

    Is it possible to save an Event and the informations attached to his medias (favorites, Keywords, Notes) on an external disk where I saved the first version of this Event, without re-copying the all medias on a new Event called fcp1?

    If they both have the same media, you can just copy the CurrentVersion.fcpevent file.  But then you have two databases with the same UUID, and FCP X will only open one of them.  If you use Carbon Copy Cloner, you can clone just that folder to the external drive, and set it up to only update files that are newer or have changed.

  • Send an automatic email to business partner when i create a new service call

    HI,
    I NEED TO SEND AN EMAIL TO BUSINESS PARTNER AN AUTOMATIC WHEN I CREATE A NEW SERVICE CALL
    I USE SAP BUSINESS ONE 8.82 PL 15
    THANKS..

    Ivan te adjunto mi código del SP me emite el msg de error:
    " Msg 14607, Level 16, State 1, Procedure sysmail_verify_profile_sp, Line 42
    profile name is not valid
    (1 row(s) affected)"
    Me arroja un valor 0.
    Adjunto mi codigo del SP:
    USE ["MiBase de Datos"]
    GO
    /****** Object:  StoredProcedure [dbo].[Emails_send]    Script Date: 04/14/2015 13:35:59 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    ALTER PROCEDURE [dbo].[Emails_send]
    AS BEGIN
    EXEC msdb.dbo.sp_send_dbmail
    @profile_name ='MyMailAccount', (Asi se llama el perfil en donde esta config mi mail)
    @recipients ='[email protected]',
    @subject ='Orden de Servicio',
    @body ='Llamada de Servicio',
    @query ='SELECT T0.[ItemCode], T0.[ItemName], T0.[FrgnName]FROM OITM T0 WHERE T0.[ItemCode]= ZF122SM02IDQ',
    @attach_query_result_as_file = 1, @query_result_separator =';',
    @query_result_no_padding = 1, @exclude_query_output = 1,
    @query_result_header = 1,@query_attachment_filename ='LlamadaServicio.pdf'
    END

  • New Service Call Number not being created. SBO 2007A

    Every time we try to create a new Service Call, the window opens with the number of the last service call created. It's like onnm doesn't know somebody created that number already. Can anybody tell me the objectcode for a Service Call so I can take a look? While you're at it, where is a reference to all the object codes in onnm?
    TIA
    Cindy Lange

    The Service Call number is not really in the document numbering.
    It actually comes from the OSCL table and the field is Callid
    Suda

  • Call dropped by new incoming call

    Quite often when I am in the middle of a Lync voice call a new incoming call comes in and causes the live call to be instantly dropped before the incoming call can be ignored.
    This does not happen all the time but does happen several times per week and is very frustrating.
    What could the issue be?

    Hi,
    Please check if there is any error message on Mediation Server when the issue happen again.
    You can try to update Lync Server 2013 to the latest version and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for