New weblogs file not found

Hello. I just set up weblogs for the first time. I enabled weblogs in server admin and chose a theme. I left the default folder for storing files as it was, but I can't access weblogs from the web. I have several sites on my server. I have tried all of them in each of these ways - http://domainname.com/weblog, http://www.domainname.com/weblog and I have even tried using my ip address instead of my domain names. Every time, I get error 404 file not found. Does anyone know what might be going on here? Thanks in advance.

Ok i may have a fix for the vanishing entries broken server and such ..
What 10.4.6 messes a LOAD with is actually our good ole posix files ..
Most of my files inside /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<USERNAME>/ were set back to root:admin ...
Charming isnt it ? Of course there are NO Ways (POSIX) the process can access these .. so you have to modify a few things .
First : Stop application server and webservices.
Second : make sure permissions inside /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<USERNAME>/ will list as follow :
1626760 drwxr-xr-x 12 appserve appserve 408 Jun 18 04:14 .
631548 drwxrwx--- 17 appserve appserve 578 Jun 18 04:02 ..
1626761 -rw-r--r-- 1 appserve appserve 65 Jun 18 04:02 authorization.properties
1626762 -rw-r--r-- 1 appserve appserve 1029 Jun 18 04:00 blacklist.filters
1626763 -rw-r--r-- 1 appserve appserve 1611 Jun 18 04:02 blog.properties
1626764 -rw-r--r-- 1 appserve appserve 138 Jun 18 04:00 contextloader.properties
1626765 -rw-r--r-- 1 appserve appserve 543 Jun 18 04:01 emoticons.properties
1626766 -rw-r--r-- 1 appserve appserve 593 Jun 18 04:00 flavor.properties
1626767 -rw-r--r-- 1 appserve appserve 97 Jun 18 04:01 macros.properties
1626768 -rw-r--r-- 1 appserve appserve 709 Jun 18 04:00 plugin.properties
1626769 -rw-r--r-- 1 appserve appserve 192 Jun 18 04:00 referer.properties
1626770 -rw-r--r-- 1 appserve appserve 117 Jun 18 04:00 showmemore.properties
if they dont run the following sudo ed commands .
chown appserver:appserveradm /Library/Tomcat/blojsom_root/webapps/ROOT/WEB-INF/<Username>
Thrid : look up in your /Library/Application Support/Weblogs/ your entries may have been modified as well ..
run the following sudoed :
su
<password>
cd /Library/Application Support/Weblogs
ls -Cauil
if you get root somewhere your entries will be unusable . hence you have again to change the owners .
chown -R appserver:appserveradm /Library/Application\ Support/Weblogs/
ls -Cauil shall now give you the following ...
631548 drwxrwx--- 17 appserve appserve 578B Jun 18 04:21 ./
631542 drwxrwx--- 10 appserve appserve 340B Jun 18 04:21 ../
1626605 -rw-rw---- 1 bertrand appserve 6K Jun 18 03:54 .DS_Store
1626760 drwxr-xr-x 12 appserve appserve 408B Jun 18 04:14 <USERS>/
631613 -rw-rw---- 1 appserve appserve 363B Jun 18 04:00 blojsom.properties
631549 drwxrwx--- 12 appserve appserve 408B Jun 18 04:00 bootstrap/
631594 drwxrwx--- 4 appserve appserve 136B Jun 18 02:06 classes/
631597 drwxrwx--- 13 appserve appserve 442B Jun 18 04:02 default/
631615 -rw-rw---- 1 appserve appserve 228B Jun 18 04:00 dispatcher.properties
631575 drwxrwx--- 20 appserve appserve 680B Jun 18 04:00 lib/
1626559 -rw-rw---- 1 root appserve 116B Jun 18 04:00 plugin-admin-edit-users.properties
631617 -rw-rw---- 1 appserve appserve 270B Jun 18 04:00 plugin-admin-upload.properties
631618 -rw-rw---- 1 appserve appserve 2K Jun 18 04:00 plugin.properties
631560 drwxrwx--- 16 appserve appserve 544B Jun 18 02:06 templates/
631611 -rw-rw---- 1 appserve appserve 1K Jun 18 04:00 velocity.properties
631612 -rw-rw---- 1 appserve appserve 5K Jun 18 04:00 web.xml
631614 -rw-rw---- 1 appserve appserve 185B Jun 18 01:14 xmlrpc.properties
Fourth restart the application server service and web service ..
Enjoy the fix .
Mac os X server 10.4.6   Mac OS X (10.4.6)  

Similar Messages

  • Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

    Each time I start up my computer and have my iPhone plugged in, I get a message window that eads "New Wave" file not found in your files....How do I get this file I am missing?

    Hey Podieboy,
    Thanks for the question. It sounds like you are receiving a message about missing files when you start iTunes. The following resource may provide more information:
    iTunes: Finding lost media and downloads - Apple Support
    http://support.apple.com/en-us/TS1408
    If the file/song is not important, you can simply delete it from your library to avoid this error message in the future:
    iTunes 12 for Windows: Delete songs, playlists, or other items
    http://support.apple.com/kb/PH20391
    Thanks,
    Matt M.

  • Qosmio X70-A-12 and new BIOS - FILE NOT FOUND

    ifi would to download the brandnew BIOS driver (20/12/2013 - 1.40 WIN) i get an 404 !!!
    http://www.toshiba.at/innovation/download_bios.jsp?service=AT
    Thx for fixing that SOON
    Qosmio X70-A-12

    how long must we wait?
    it is simply not acceptable that you are selling gaming notebooks, which you can not play because you have to have the fear start to burn them!!
    finally brings a bios driver out cools this whole s***.
    your support is very very bad.
    if you have a problem you will be redirected to the forum where nobody helps or granted only s***** advices.
    or you should call the expensive special phone number for 1 per minute but please.
    I have a qosmio x70 a12, which has cost me nearly 2000 .
    I can think for this amount of money you expect service and not dead left (bios 404) or during the day no download limit.
    I'm almost compelled, the system cpu to throttle 100mV does not run out of laptop due to overheating. and in battlefield bad company 2 from the year 2010!

  • Error running exe to write to exel file: Error 7 New file not found

    Hello!I have this problem, i've looked everywhere and i still can't solve it. It would be great if anyone can help me.
    I built an application that writes an array to a spreadsheet file.
    Everything works fine in Labview 7.1 , i can build the exe file, but
    when i try to run it it doesn't work (it doesn't do anything although
    in Labview works perfecty well)and i have this error:
    <<Error 7 occurred at New File; Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or
    deleted, or the file path might be incorrectly formatted for the
    operating system. For example, use \ as path separators on Windows, :
    on Mac OS, and / on UNIX.>>
    I've attached the vi file and the exe file.
    Thank you
    Attachments:
    app.zip ‏167 KB

    You've made a very, very common mistake and one discussed in numerous postings. When running in development mode and using the Current VI's Path, the path to a VI would be something like c:\folder\example.vi. When built, it becomes c:\folder\app.exe\example.vi. An extra strip path is required. Look at this, this, and this.

  • New Nano shows in source but file not found

    This is really frustrating. My new nano starts to sync in I-tunes. IT will start to download my library then about a third of the way into it an error comes up that says "Nano can not be updated the required file can not be found". I've updated i-tunes, restored the Nano, even though it's new. It shows up on the I-tunes source list and in device manager. Then after I get the error of "file not found" I-tunes says update complete. When I disconnect the ipod, it's frozen on do not disconnect and I have to reset it.
    Any ideas?

    Hi,
    Did you updated Latest CR_content  and Cimsap?
    If not download from SAP marketplace and update in SLD.
    Regards,
    Manivannan P

  • Apache plug-in prob : when trying to access '/weblogic/' URL , "404 : file not found" error is shown

    On : Apache 2.0 , Weblogic 7.0, Win 2000
    I installed the Apache plug-in for as described in WL docs, but when I try to
    access a URL /weblogic/ ( supposed to be configured automatically ) on apache,
    I get '404 : file not found' error.
    As per the docs, I did following config in Apache:
    1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory to the
    APACHE_HOME\modules directory
    2. Added to httpd.conf :
    LoadModule weblogic_module modules/mod_wl_20.so
    3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
    -t '
    4. Restarted WL & Apache.
    Now, the weblogic documentation says,
    "Test the Apache plug-in by opening a browser and setting the URL to the Apache
    Server + "/weblogic/", which should bring up the default WebLogic Server HTML
    page, welcome file, or default servlet, as defined for the default Web Application
    on WebLogic Server. For example:
    http://myApacheserver.com/weblogic/".
    For my server, 'http://localhost/weblogic/' - I get a "404 : file not found" error.
    What other configuration is needed ? Do I have to specify '/weblogic/' name anywhere
    else in Apache configuration file ?
    Any pointers will be appreciated.
    Thanks,
    S

    Forgot to mention , I've also added following configuration in httpd.conf :
    LoadModule weblogic_module modules\mod_wl_20.so
    <IfModule mod_weblogic.c>
    WebLogicHost localhost
    WebLogicPort 7501
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    PathTrim /weblogic
    </Location>
    "S" <[email protected]> wrote:
    >
    On : Apache 2.0 , Weblogic 7.0, Win 2000
    I installed the Apache plug-in for as described in WL docs, but when
    I try to
    access a URL /weblogic/ ( supposed to be configured automatically ) on
    apache,
    I get '404 : file not found' error.
    As per the docs, I did following config in Apache:
    1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory
    to the
    APACHE_HOME\modules directory
    2. Added to httpd.conf :
    LoadModule weblogic_module modules/mod_wl_20.so
    3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
    -t '
    4. Restarted WL & Apache.
    Now, the weblogic documentation says,
    "Test the Apache plug-in by opening a browser and setting the URL to
    the Apache
    Server + "/weblogic/", which should bring up the default WebLogic Server
    HTML
    page, welcome file, or default servlet, as defined for the default Web
    Application
    on WebLogic Server. For example:
    http://myApacheserver.com/weblogic/".
    For my server, 'http://localhost/weblogic/' - I get a "404 : file not
    found" error.
    What other configuration is needed ? Do I have to specify '/weblogic/'
    name anywhere
    else in Apache configuration file ?
    Any pointers will be appreciated.
    Thanks,
    S

  • I have 3.6 & am trying to upgrade to current version. When trying to update didn't work, I trashed 3.6 & tried new install. Keep getting "File not Found" page.

    Could not update from 3.6 (said I was not authorized). Tried trashing 3.6 and accompanying files and do a clean install of new version. When I click to download I am redirected to a Mozilla "File not found" page. From there I try clicking on Firefox and downloading the English(US) for OSX file and it directs me back to the same file not found page. I have tried this several times.

    Where are you trying to download Firefox from? You should be using [http://www.getfirefox.com www.getfirefox.com], the official Firefox Download site.

  • On certain news web sites, the front page displays ok, but click on a story, it displays and then I get the popup file not found.

    On the Boston Globe web page, for example, their home page displays just fine. When I click on any news title, the page displays for an instant and then this pops up:
    File not found
    Firefox can't find the file at jar:file:///C:/Program Files/Mozilla Firefox/chrome/en-US.jar!/locale/browser-region/region.propertieswd.sharethis.com.
    * Check the file name for capitalization or other typing errors.
    * Check to see if the file was moved, renamed or deleted.
    I click on the "Try Again" button and nothing happens.

    Vuze installs ask.com's tool bar also. Check for a Vuze plug in. Thanks for the fix.

  • When I attempt to load a new webpage, I receive a "File not Found" message, then multiple new tabs open with the same message; additional browsers pop up with same message. This happens when attempting to load any page. I've unloaded Firefox once already.

    File not found
    Firefox can't find the file at /C:/Program Files/Common Files/SYSTEM/MSMAPI/1033/ÂvSÀ×4ÏF2drÀ‰«W8Œ µ{ö8ÉÀ%0CðìSz%06@%6éRƒTk%1D¡%15ppÓw­%7F@%07:,`Æb.
    * Check the file name for capitalization or other typing errors.
    * Check to see if the file was moved, renamed or deleted.

    Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
    (122872)

  • My iTunes wouldn't update and so I tried to reinstall the new version, my computer restarted and when I clicked on iTunes, it said file not found.

    I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I looked everywhere but could not found a working application link. Help!!

    Hi Applefan 6968,
    If you are having issues updating or reinstalling iTunes on your Windows machine, you may find the following articles helpful:
    Apple Support: Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Regards,
    - Brenden

  • ConfigurationException during deploy "CONFIGURATION FAILED! File not found"

    Hello All,
    The deployment of my adf app. is failing with the following error. Although till yesterday also, it was failing but atleast it was going much farther than this. What is causing this error? I did make changes to config.xml but then restored it. Any help is appreciated. This is critical.
    ####<Sep 14, 2011 1:23:36 PM CDT> <Info> <J2EE Deployment SPI> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024616200> <BEA-260121> <Initiating deploy operation for application, myProject [archive: F:\Oracle\Middleware\user_projects\domains\BPEL_DEV\servers\AdminServer\upload\myProject.ear], to AdminServer .>
    ####<Sep 14, 2011 1:23:47 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <u00w669> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae49> <1316024627386> <BEA-149038> *<Initiating Task for myProject : [Deployer:149026]deploy application myProject on AdminServer.>*
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <J2EE> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630053> <BEA-160170> <Imported library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 for Application myProject>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <WorkManager> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630069> <BEA-002903> <Creating WorkManager from "wm/SOAWorkManager" WorkManagerMBean for application "myProject">
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630272> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:23:50 PM CDT> <Info> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024630771> <BEA-101363> <Application: myProject, WebApp: mySubProj has context-root specified in application.xml: "mySubProj". The context-root specified in weblogic.xml: "mySubProj" will be ignored.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001ae5c> <1316024693171> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module weblogic.xml.registry.XMLModule of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module weblogic.xml.registry.XMLModule of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module empty.jar of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module empty.jar of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149059> <Module mySubProj of application myProject is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:53 PM CDT> <Info> <Deployer> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024693312> <BEA-149060> <Module mySubProj of application myProject successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Sep 14, 2011 1:24:54 PM CDT> <Warning> <HTTP> <brksvw379> <AdminServer> <[STANDBY] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a01b3820e693e909:-2d9cadd5:132642becba:-8000-000000000001aeac> <1316024694451> <BEA-101162> *<User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found.*
    java.lang.RuntimeException: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:294)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: com.sun.faces.config.ConfigurationException: CONFIGURATION FAILED! File not found
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:357)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:227)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: java.io.FileNotFoundException: File not found
    at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(ZipFile.java:117)
         at java.util.jar.JarFile.<init>(JarFile.java:135)
         at java.util.jar.JarFile.<init>(JarFile.java:72)
         at com.sun.faces.facelets.util.Classpath.getAlternativeJarFile(Classpath.java:262)
         at com.sun.faces.facelets.util.Classpath.search(Classpath.java:115)
         at com.sun.faces.facelets.util.Classpath.search(Classpath.java:92)
         at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.loadURLs(MetaInfFacesConfigResourceProvider.java:159)     
    at com.sun.faces.config.configprovider.MetaInfFacesConfigResourceProvider.getResources(MetaInfFacesConfigResourceProvider.java:107)
         at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1096)
         at com.sun.faces.config.ConfigManager$URLTask.call(ConfigManager.java:1064)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at com.sun.faces.config.ConfigManager.getConfigDocuments(ConfigManager.java:642)
         at com.sun.faces.config.ConfigManager.initialize(ConfigManager.java:309)
         at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:226)
         at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
         at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    I did some more research and found out that method loadURLs of class MetaInfFacesConfigResourceProvider.java is throwing IOException. Is this some kind of class path issue? Please help!
    private Collection<URL> loadURLs(ServletContext context) throws IOException {
    154
    155 Set<URL> urls = new HashSet<URL>();
    156 for (Enumeration<URL> e = Util.getCurrentLoader(this).getResources(META_INF_RESOURCES); e.hasMoreElements();) {
    157 urls.add(e.nextElement());
    158 }
    159 urls.addAll(Arrays.asList(Classpath.search("META-INF/", ".faces-config.xml")));
    160 // special case for finding taglib files in WEB-INF/classes/META-INF
    161 Set paths = context.getResourcePaths(WEB_INF_CLASSES);
    162 if (paths != null) {
    163 for (Object path : paths) {
    164 String p = path.toString();
    165 if (p.endsWith(".taglib.xml")) {
    166 urls.add(context.getResource(p));
    167 }
    168 }
    169 }
    170 return urls;
    171
    172 }
    173
    Edited by: user12054715 on Sep 14, 2011 2:13 PM

    I did a couple of things ( gathered from various posts on OTN). I am not sure which one did the trick but the error is gone now. I am mentioning the steps that I took. Later when I have more time, I will narrow down to exactly what worked.
    1. The following was missing from my web.xml (Thanks Rene!) Added it
    <listener>
    <listener-class>com.sun.faces.config.ConfigureListener</listener-class>
    </listener>
    2. Removed any mention of 'Anonymous-User' from Jazn-data.xml.
    Application tab -> Secure -> Configure ADF Security -> Jazn-data.xml (source tab and removed block of code referring to anonymous user)
    Hope this will help others.

  • Weblogic 6 Post Installation Problem - weblogic.Server not found

    I reinstalled my recent downloads of the evaluation
    copy of Weblogic 6.0 server three times on my NT 4.0 Service
    pack 6 notebook computer. Installation works. However, I can't
    start the server using the "startWebLogic.cmd". I get an error
    that says that the class "weblogic.Server" is not
    found -
    Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
    javap command cannot locate the class either.
    My suspicion: weblogic .jar is corrupt.
    Question: How do I get a new jar file? I have already
    downloded the install files twice with no luck.
    I have enclosed the command prompt messages.
    [d:\bea\wlserver6.0\config\myadmindomain]setEnv
    set WL_HOME=d:\bea\wlserver6.0
    set JAVA_HOME=d:\bea\jdk130
    set CLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
    ;d:\bea\wlserver6.0\lib\weblogic.jar;
    set PATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
    INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visual Stud
    io\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Microsoft V
    isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Visual S
    tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
    Your environment has been set.
    [d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
    set PATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
    2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visua
    l Studio\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Micro
    soft Visual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Vi
    sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
    set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
    "d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath .;.\lib\weblogic_sp.j
    ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserver "
    -Dbea.home=d:\bea" "-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
    cy" -Dweblogic.management.password= weblogic.Server
    Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
    goto finish
    cd config\myAdminDomain
    ENDLOCAL
    [d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
    Class 'weblogic.Server' not found

    It looks like your startWebLogic.cmd script has problems with the class
    path. You should doublecheck that.
    Thanks,
    Michael
    Michael Girdley
    BEA Systems
    Learning WebLogic? http://learnweblogic.com
    "Bindu Rao" <[email protected]> wrote in message
    news:[email protected]...
    >
    I reinstalled my recent downloads of the evaluation
    copy of Weblogic 6.0 server three times on my NT 4.0 Service
    pack 6 notebook computer. Installation works. However, I can't
    start the server using the "startWebLogic.cmd". I get an error
    that says that the class "weblogic.Server" is not
    found -
    Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
    javap command cannot locate the class either.
    My suspicion: weblogic .jar is corrupt.
    Question: How do I get a new jar file? I have already
    downloded the install files twice with no luck.
    I have enclosed the command prompt messages.
    [d:\bea\wlserver6.0\config\myadmindomain]setEnv
    set WL_HOME=d:\bea\wlserver6.0
    set JAVA_HOME=d:\bea\jdk130
    setCLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
    ;d:\bea\wlserver6.0\lib\weblogic.jar;
    setPATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
    INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisual Stud
    io\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Microsoft V
    isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\MicrosoftVisual S
    tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
    Your environment has been set.
    [d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
    setPATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
    2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisua
    l Studio\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Micro
    soft Visual Studio\VB98;D:\Microsoft VisualStudio\VIntDev98\bin;D:\Microsoft Vi
    sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
    set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
    "d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath.;.\lib\weblogic_sp.j
    >
    ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserv
    er "
    -Dbea.home=d:\bea""-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
    cy" -Dweblogic.management.password= weblogic.Server
    Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
    goto finish
    cd config\myAdminDomain
    ENDLOCAL
    [d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
    Class 'weblogic.Server' not found

  • Error on WWI server EHS_GLM_GENSERV: Results file not found on production

    Hi Experts,
    I need some help/advice. We have issues with our new EH&S WWI server. 
    This new setup working OK with Dev and QA (the WWI and GLM part is just fine), We did try to link this server to production then it gives below error.
    Only difference between  existing WWI QA and production server is that
    Existing QA and development WWI server installed at location C:\Program Files (x86)\EHS\WWI 
    And Same path maintain on new server C:\Program Files (x86)\EHS\WWI  
    But existing production WWI server installation path  is  different C:\Program Files\EHS\WWI
    So is there any customizing changes required from SAP side to avoid this error on production
    Can you please advise on this.
    ================================================================================
    Error on WWI server EHS_GLM_GENSERV: Results file not found
    Message no. C$830
    Diagnosis
    The results file of the generation was not found on the WWI server EHS_GLM_GENSERV.
    System Response
    Generation was not carried out.
    Procedure
    Advise your system administrator to check the WWI installation on the WWI server EHS_GLM_GENSERV.
    Check the Windows event log on the WWI generation server. The event log may contain other error messages.
    SAP Note 1058521 provides possible solutions for this error.
    ==================================================================================
    Log shows
    ============================================================================================================================================
    E000 Error: OLE Exception (-2146823114) from Word8_OpenDoc (docs.Open) by Microsoft Word: This file could not be found. (C:\Windows\...\r00000000000001422051.rtf) (HRESULT Code:5174)
    E000 Error opening document (Word8_OpenDoc: Documents.Open failed)
    ================================================================================================================================================

    Hello Gajanan,
    the path of the temporay workfolder can be configured in the IMG. Often this path is setup as the WWI server installed location but it is just a temporay workfolder which must exist on the WWI server. The path can be configured under:
    For ECC 6.0 Ehp 0-2 and lower
    Environment, Health and Safety -> Basic Data and Tools -> Basic Settings -> Specify Environment Parameters
    For ECC 6.0 Ehp 3-6
    Environment, Health and Safety -> Product Safety -> Global Label Management -> Make Settings for Basic Data
    For ECC 6.0 Ehp 7
    Environment, Health and Safety -> Global Label Management -> Set Basic Data and Tools for Global Label Management -> Make Settings for Basic Data

  • Why am I getting File not Found alert when I type into my browser?

    Why do I keep getting a File not Found alert when I type into my browser?
    I have been using firefox for about 4 yrs now with very few problems. The problem I am having is that when ever I go to type in anything into my browser I keep receiving this message:
    (Scroll down to see the rest)
    File not found
    Firefox can't find the file at jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.jar!/chrome/en-US/locale/browser-region/region.propertieschronic+fatigue+syndrome.
    I recently installed Firefox 5.0 and this keeps happening. It happened with the 4.0 version a couple of days ago but mostly it is the 5.0 version that I am having problems with. When ever I want to do a search I have to manually type in google.com. Is there a solution to fix this?

    The NuGet is a dll that was built with 4.0.0.0.  The easiest thing to fix problem is target you VS project to use Net 4.0.  You could get a new version of NuGet, but if you do make sure you rebuild your entire project.  The dependencies in
    the VS compiler doesn't always recognize updated libraries.  So I normally rename the bin folder in the project and then delete the bin folder.  VS will create a new bin folder and then rebuild all the source files.  If your project contains
    multiple projects then remember to delete the bin from all projects.
    jdweng

  • How to embed audio to my website using quicktime when I get "file not found

    hi,
    i've been trying to embed audio into my website all night and I get a file not found message even though I;ve checked 100 times and all files are where links say they should be..
    but even just linking to audio (mp4) files won't work...
    everything is o.k. with non-audio links on my website - only the mp4 audio can't be found.
    can anyone help me? or post the correct code?
    I've tried using these formats..
    <EMBED SRC="anymovie.mov" HEIGHT=176 WIDTH=136>
    <embed
    src="http://www.crossandthrone.com/.samples/qt/sample-reference2.mov"
    width="242" height="199" autoplay="false" loop="false"
    controller="true" bgcolor="#666666"
    pluginspage="http://www.apple.com/quicktime/"></embed>
    the pages that should play audio just have a quicktime file with a question mark on them
    help would be much appreciated!

    Start here:
    http://www.mediacollege.com/video/streaming/
    --Nancy O.
    Alt-Web Design & Publishing
    www.alt-web.com
    "subdued2u" <[email protected]> wrote in
    message
    news:gbg2th$r13$[email protected]..
    > Hello ,guys, i have a website,, and i would like to add
    upload vidoes on
    my
    > website i have tried but did not work can anyone please
    tell me how to
    embed my
    > videos in my website using dreamwever ?
    > thank so much
    >

Maybe you are looking for

  • The design of this website is confusing and hard to use.

    Adobe are regarded as the industry standard of design software, so it seems ironic (or embarrassing) that this website is so poorly designed. I came here simply wanting to post a question about Flash Player but found it the whole experience to be con

  • Importing RAW pictures

    When I shoot RAW with my Canon Digital Rebel XT, I often change the settings inside the camera to B&W, tint etc.. When I import these images into Aperture, the B&W or tint is gone and I'm left with the "raw" image (obviously) But how to I get the ima

  • Managing work items

    Hi experts - looking for opinions on handling workflow items for users that are no longer employed at our company. Hypothetical example:  a workflow related to a purchase order has multiple steps that create work items for a buyer (po approval may ne

  • Disappearing buttons in applet

    When I view an applet I have created on a webpage it works fine. Then I scroll down a bit and the buttons drop out of view. Then I scroll back and the buttons seem to disappear. Placing the mouse over them brings them back. Check it out for yourself

  • Unexpected element name: expected WHEN INVOKING A WEB SERVICE

    I am pretty new to Web Services and need some helping in resolving the following error. I created following two classes and published one of the method savePerson. When I tried to invoke the webservice through my browser passing the following: <ns1:s