New Xserve automatic startup what I plug power cable
I just got a new Xserve (Intel base ) , and I found it's really stranger . Every time , I plug the power cable , it will automatic power on and startup even I have press the power button .
Use software update , reset pmu , It don't work .
So I try to set # nvram 'auto-boot?=false' , still don't work .
Is there anybody has same issue ?
Xserve Mac OS X (10.4.8)
Jing Hui Zhou-
Greetings and welcome.
Unless there is a physical problem, perhaps it is a setting. Check System Preferences->Energy Saver->Options and uncheck the box that says "restart automatically after a power failure".
If that isn't it, perhaps there is a hardware problem.
Luck-
-DaddyPaycheck
Similar Messages
-
What kind of power cable is best?
My power cable on my Lime iBook (366Mhz) recently gave out. I found a place to get a new one of the same kind (apparently it's called a "yoyo" design.) However, my current one broke at the same point as the last one (albeit after much longer usage) right near where it connects to the computer, showing sparks when I try to shift it a bit. Since this type seems to have a weak point there, I was wondering if there is a more durable power cable available for this style of iBook.
Anyone know of any?
Thanks.The cable is thin there and even though you could use an older adapter for the previous gen. powerbooks (powerbook duo, 1400 etc.) it will also have the same weak point. Not much to do other than being more careful with it.
I'm sure any electronic shop in your area would be able to assess as to whether or not it can be repaired ....shouldn't cost too much.
Hope this helps. -
[KT4V] speaker biiips when I plug power cable
Hi,
My mother board has a strange problem for some months.
Each time I disconnect and reconnect the power cable, I hear the system speaker doing a very long biiip (about 30sec - 1minut). And during that, I can't start my computer.
It's very strange and annoying. I don't know where this problem comes from. Before that, it worked perfectly!
My computer :
MSI KT4V (MS-6712)
AMD Athlon XP+ 2000
2*256 DDR
GeFOrce 5900XT
SoundBlaster128PCI
CD burner and DVD player
120 + 80Go hard drives
300W PSU
I hope you'll help me!
THX!Quote from: Fredrik Åsenius on 28-July-05, 05:03:40
Just to know, why do you pull the power cable?
Because there are some thunders and I don't want my computer to burn
Quote from: Fredrik Åsenius on 28-July-05, 05:03:40
And does the system shut-down properly?
Yes, both in windows and Linux
Quote from: Fredrik Åsenius on 28-July-05, 05:03:40
A final question, what are the temps of your system?
It's quite hot at the moment... between 49 and 55°C for the CPU and around 31°C for the box
Quote
Well, your P.S. is very poor. Try with a better one with More AMPS.
My computer works for 2-3 years with this PS, so, it has enough AMPS. I'll try with another oine. If it works, that means that my PS will die... -
i am moving to the uk from oz and was wondering do i have to replace the whole power cable for my mac book 15inch pro....or can i just replace the actual plug in the wall part ..if i can what is this called as when i look on line it just comes up with the complete power unit...it seems odd that you have to buy the whole unit again...thanks.matthew
All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ -
I my ipod isn't letting me swipe in on the lock screen, and for now, i've given up on that, and i just got a new laptop. So what i'd like to do is not worry about getting in my ipod, but to plug it in my computer and get my music off of it. it is not letting me do this because i have to unlock my ipod but, sadly i cannot, if anyone can help me it would be greartly appreitiated.
You don't have to purchase it again, but you do have to download it. See Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
-
Got new macbook pro. What is the best way to transfer my itunes from my old pc to my new mac? I want to be able to plug my iphones and ipad in to new mac and have redo anything
See Here... This should transfer everything...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html -
Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...
Grumpy Gator,
Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
Hope this helps. -
I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help
Did you try to remove all Apple related software and reinstall iTunes again? Removing iTunes, QuickTime, and other software components for Windows Vista and 7
-
Since getting a new Verizon router I must unplug/plug in my Apple TV to get it to connect to the network every time I turn it on. What can I do to solve this problem?
I would discover which brand of routers verizon bundle and go to the router makers homepage and check if they had a newer firmware for the router
-
How do i change the computer for my iphone? it says iphone will syn automatically once it is plugged into "DUCH..." (not my computer name) . what should i do to change that?
Connect your phone to iTunes and in the Summary pane, hit the "Sync with this iOS device over Wi-Fi"
http://support.apple.com/kb/PH2560 -
Just got a new iphone 5. When I plug in the ear buds, the audio still comes out of the phone itself. How do I transfer the audio to the ear buds?
Make sure it's plugged in all the way, because it clicks when it's no all the way In and many users get confused. If not try turning it.
-
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
9iAS R2 Automatic Startup at Boot time on Windows
How to successfully start the 9iAS R2 Application Server at boot time.
Many of you are still struggling with the problem of 9iAS R2 not automatically starting up properly when your system is restarted. I've been fighting this issue for several weeks and have found the problems, and pitfalls, involved with fixing it. It really is a race condition of things trying to start up before something it depends on is fully functioning, or some application starting out of sequence.
There is a bug associated with this problem; BUG 2511270 ( 9IASV2 Need Ability to Restart All Components in Instance After a Reboot). The bug report itself has very little useful information in it other than to say it doesn't work, and manually starting the components is the only known fix. If you're like me. this isn't a good enough answer.
Your mileage may vary.
My configuration has a 9.2.0.1 customer database, and a 9.0.1.3.1 infrastructure database that is also the application server database, including portals, all installed on the same system which is a Pentium 4, Windows 2000 machine, with 1.5GB of memory. I only use a single LISTENER, which runs out of the 9.2 DB ORACLE_HOME.
Chapter 5 (Starting and Stopping the Application Server) of the Oracle9i Application Server Administrator's Guide shows all of the commands necessary, in the proper order, to manually start the infrastructure and application server. Unfortunately, there is also some incorrect information in this document.
Part 1c in the section Starting an Infrastructure Using Commands on Windows, using SQLPlus to connect to and start the database, does not work unless oracle.exe is already running (which means that you recently shutdown the database by command, not with "services>stop"). If your system is rebooting, oracle.exe is not running. This exact same information is documented in the Database Administrators Guide, Chapter 4, Starting a Database. If you don't have these manuals handy the offending commands are as follows:
ORACLE_HOME\bin\sqlplus /nologsql> connect sys/password_for_sys as sysdba
sql> startup
sql> quit
Since we can't put some variant of the above in a command script to manually start the databases and wait for it to open, the only option left is to let the databases come up in "automatic" mode when the system boots, and run the remaining commands when they are open. If your system is like mine, that can take several minutes, even after you've logged on and gotten your first cup of coffee.
If you set up a command script to run at startup, you don't have any control over when the script gets run, more than likely, in this case, before the databases are open. Unfortunately, Microsoft does not have anything resembling a sleep (timer, wait, delay, etc) command that can be used in a script. There may be something somewhere, but I can't find it. So I wrote one in Perl, which does have a sleep command. You can use anything you have available to you that will function as needed. We obtained our Perl distribution from http://aspn.activestate.com/ASPN/Perl.
The next issue has to do with starting the Oracle Internet Directory. The documentation shows two commands to execute, but in reality, only the first one is required, it automatically takes care of the second one. Refer to the command file below for the correct one.
The last issue deals with running the dcmctl commands. If you run these commands one at a time in a command window, you won't notice anything askew. If you run them, as shown, in a script, they will stop execution of the script when they complete, and there will be no indication that anything wrong has happened. The CMD.exe still exists, it just isn't running. They must be run in there own cmd command as shown below.
Now, let's review the steps necessary to get all this to work.
Put the two scripts shown below in there target directories and edit any necessary changes for your system.
In Start>Settings>Control Panel>Administrative Tools>Services set the OracleServiceSID's and the OracleOraHomeTNSListener to Automatic Startup Type. All other Oracle* services should be set to Manual.
In Start>Programs>Accessories>System Tools>Scheduled Tasks double click on the Add Scheduled Task item,
select Next,
Browse to where your startup script resides,
double click the file name,
select "When my computer starts",
select Next,
Enter a user name and password (that has ORA_DBA privileges)
select Next, then Finish.
Uncomment the first exit in the iasStartup.cmd script.
Reboot your system.
Compare the database open time stamp in each database alert log to the time recorded in the iasStartup.log file to determine you first time delay. Add 10-20 seconds or more to this difference just to be safe. If you add services at a later time, this number may need to be increased.
Edit the iasStartup.cmd file to include this time delay for the first sleep command and comment out the first exit command.
Reboot your system.
After several minutes, all infrastructure and application server processes should be up and running. You can check this in several ways; Look at the log file to see if all commands were run, Look at the Windows Task Manager to see if all expected tasks are running, Look at Services to see what is running. Finally, you can look at the Infrastructure Enterprise Manager Website and click on each instance to determine the current status of each system component. On mine, the component Portal:portal:7779 always shows as down but in reality it is functioning.
The following command script only starts the minimum set of processes that I require. Your requirements may be different so refer to the documentation for additional commands.
Enjoy.
******** iasStartup.cmd ********
REM # iasStartup.cmd
REM # Command script to start the infrastructure and application server at system boot
REM # Mike Bukaty
REM # Sandia National Laboratories
REM # [email protected]
REM # set default directory that contains the log and sleep.pl files.
cd E:\Oracle\admin
echo Starting iasStartup.cmd > iasStartup.log
time /t >> iasStartup.log
REM # Uncomment the following command to determine the time delay for your system
REM # exit
REM # This delay is determined by looking at the times from the alert logs
REM # for when the database was opened and the time recorded above.
REM # SLEEP is a perl script to do just that (in seconds) since Windows doesn't have one.
sleep.pl -delay=120
time /t >> iasStartup.log
REM #Start the infrastructure first
REM #The SID for the infrastructure must be set
set ORACLE_HOME=E:\Oracle\as9inf
set ORACLE_SID=iasdb
echo Starting as9inf oidmon >> iasStartup.log
%ORACLE_HOME%\bin\oidmon start
echo Starting as9inf EMWebsite >> iasStartup.log
net start Oracleas9infEMWebsite
REM # Have to wait for all of the website process to finish
sleep.pl -delay=40
REM # All calls to dcmctl must be in there own CMD environment,
REM # or they will halt this one when they complete
echo Starting as9inf dcmctl ohs >> iasStartup.log
cmd /c %ORACLE_HOME%\dcm\bin\dcmctl start -ct ohs
sleep.pl -delay=5
echo Starting as9inf dcmctl OC4J_DAS >> iasStartup.log
cmd /c %ORACLE_HOME%\dcm\bin\dcmctl start -co OC4J_DAS
REM # Start the application server
set ORACLE_HOME=E:\Oracle\ora9ias
echo Starting ora9ias webcachectl >> iasStartup.log
%ORACLE_HOME%\bin\webcachectl start >> iasStartup.log
echo Starting ora9ias dcmctl ohs >> iasStartup.log
cmd /c %ORACLE_HOME%\dcm\bin\dcmctl start -ct ohs
sleep.pl -delay=10
echo Starting ora9ias dcmctl OC4J >> iasStartup.log
cmd /c %ORACLE_HOME%\dcm\bin\dcmctl start -ct OC4J
REM # The above command starts all existing OC4J processes.
REM # You can now stop any that aren't necessary.
echo Stopping ora9ias dcmctl OC4J_Demos >> iasStartup.log
cmd /c %ORACLE_HOME%\dcm\bin\dcmctl stop -co OC4J_Demos
time /t >> iasStartup.log
echo Finished iasStartup.cmd >> iasStartup.log
exit
******** sleep.pl ********
#!/usr/local/bin/perl
## Author: Mike Bukaty
## Sandia National Laboratories
## [email protected]
## Program: sleep.pl
$| = 1;
use strict;
use Getopt::Long;
Getopt::Long::Configure("no_ignore_case");
GetOptions(
"delay=s" => \ my $delay,
# Set default options
if( not defined($delay) ) { $delay = 1; }
sleep $delay;
exit 1;New information:
When I originally wrote this, the command script worked as advertised. That was yesterday. I've since had to add the following lines just BEFORE the call to start the oidmon.
echo Starting as9inf oidctl >> iasStartup.log
%ORACLE_HOME%\bin\oidctl server=oidldapd configset=0 instance=1 start
Sometimes me thinks that Oracle reconfigures itself at night when I'm not watching.
Enjoy. -
Drives just stop with new Xserve raid
I have just set up a new Xserve on 10.4.5 with 2 x 400 gig drives.The raid has been set up by the book twice and the drives were formated aswell, the problem is that after the raid is set up i then test it by copying lots of data to it from various machine across the network and after about 10 gigs of copying the drives just stop, on their own(not in a raid) the drives work fine.
Any suggestions ?
Thanks
MattHello, Diego Arana and welcome to the AppleBoards,
+I don´t know what OS the Xserve RAID has, I just know that it is the first one.+
The Xserve RAID has no operating system on it. It is essentially a very fancy external hard drive that attaches over fibre channel. It does a firmware version that can be updated but that is the closest thing to an OS that it has. (Unless you're adding drives you can probably leave that alone.) The XRAID is controlled over either of the ethernet ports using the RAID Admin program - if you don't have a copy download it from Apple's support site.
+Is it possible to connect a New MacPro (Early 2009) to a Xserve RAID (RAID 720G/4DRIVE/2X2GB FC) via fiber channel?+
Yes, I have done this and it is straightforward. The fibre will negotiate down to 2GB, of course, but it does just work. If you're talking about the Apple shipped fibre card it is (at least in the states) shipped with SFP connectors that match the SFP connectors that are on the Xserve RAID and you just use the copper cabling (not the optical fibre) to connect them unless you are going a very long distance. If you order the card (again in the states) with Xserve the copper cables are included when they ship it.
If you do have optical connections you can buy optical to copper/SFP converters. I have several of these on my fibre switch and they are not more complicated than adding the adaptor and plugging them in - at least on the fibre switch. I have never actually hooked up an XRAID to optical fibre but this is pretty common in XSAN environments with longer "cable" runs.
HTH,
=Tod -
New Xserve, Setting Everyone Up
Alright, so during New Years weekend, our current Xserve died. We received our new Xserve 10.6 and got it setup and currently we just created a few users, put them in a group called, "Office" and it is sharing out a folder on our Raid 5 array that everyone needs access to.
What I'm wanting to do is properly setup and configure this bad boy so that afp works flawlessly and everyone can get to the folder(s) they need to, but not into one anothers private user folder.
Before, users when they logged into their local machine, were authenticating against the server... I dont know how to move them to the new server so when they change their password on their local mac mini/imac/mbp it changes on the server etc.
Someone point me to some docs that could help explain this?Hey Eileen, Seems as though you have the same legitimate problem as any other new computer purchaser. The way that I would suggest you do it is as follows:
1) When you plug in the iPod, in itunes it will give you a window, telling about the iPod being linked to another computer and would you like to change it to this computer, select no.
2) The other pop-up that will showup will be the F:\ or E:\ drive. In this window, go Tools -> Folder Options -> And Select the Radio Button that will ask you to show hidden files and folders. There will be a new folder that will show up on your drive.
3) Click once on this folder, on the side taks pane, click Copy The Selected Files. Move these files to somewhere easy to find.
4) One they are copied go into itunes, Select File, Add Folder to Library, and the new file that you added to the computer from the ipod. Select Ok, and your songs should begin to import into the itunes Library. When this is done unplug and plug back in the ipod and when it asks you this time to sync with this library, select yes, and your music will be erased from the ipod and reinstated as a new library in unison with the songs you have on your new Laptop!
Hope this was helpful.
Maybe you are looking for
-
Equium L300 CD/DVD Drive no longer reads disks
There is already a thread with a similar problem to this with a different model, but it seems to have died. The CD/DVD drive on my Equium L300-148 now refuses to read disks. It seems to burn them still, which is strange. That must mean the laser has
-
Hi all we implement an basic WMS based on ECC6 on out WH. Everithyng was fine for more than a year. Recently i tried to do some changes in purchare order area to create a new document type. I am not sure there is a link between these but when i tried
-
Hi All! I am using Oracle Database 9i. I three PC's in my organization and they are in different cities. Each system has same db user "Waqas" but in those same users contains differenct type of record based on company_id and financial_year_id. but al
-
I made a partition to my ZVP: near of 500MB. After that I put some music and photos. After sombe weeks I reinstalled widows several times and now I installed only the Creative Explorer. I tried to connect my mp3 to the pc and nothing happens! Also I
-
SAP Community Network Community Badge
Hello All, I think SDN is providing Community badge to people every year.. Can i know what is the Criteria to get this badge. Apart from this can i know bit detail how am i contributing the UN Food Program. Thanks in advance, Nagaraj