Newb: MIDI. Random notes popping up.
Hello there.
Have a Roland Juno D plugged into Garageband using a MDUSB cable.
Not sure if I'm supposed to set it up in any special way because when I play,
the wrong notes are registered and it's highly inaccurate.
Sometimes two notes will be heard at once, three keys will play the same note
or it will go on and on unless I press 'space'.
Would highly appreciate some guidance with this and it'd be even better if
you underestimate my ability to understand!
I am having the same problem using a Yamaha M1 keyboard. I teach music and I really need a solution fast as school is getting ready to start.
Similar Messages
-
Macbook Pro and Beolab3 random loud popping sound
I'm using Macbook Pro and Bang & Olufsen Beolab3 speakers (powered speakers) connect using headphone output but I hear random loud popping sound. Sometimes so loud that it made me jump. It is definitely not a program generated sound. It is more like some sort of electrical interference. This could happen both while an audio is being played or just on standby. The laptop is less than a month old.
The speakers are fine as I tested with other laptop. Is this normal for this combination? or there actually is a fault with my sound card? I need to know so I can do something about it while it is under warrantee. I was recommend to get a audio DAC. But I need to make sure that it is not a problem with the laptop first.
Thanks. Please help. Any suggestions?Sounds like your Mac is all mucked up. Your recourse is an Apple store or Authorized Apple Service. You can also all AppleCare.
-
every time i click on a link another random link pops up in a new window. Does this mean i have a virus on my mac?
No; it means that the computer has adware. Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(122523) -
Button does not pop back.
Hi,
I trigger a dialog on mouse down event on one button which is located on my GUI. But after the user finished the dialog the button that invoked the dialog does not pop back. Is the button supposed to pop back automatically or am I supposed to programatically pop it back?
Thanks.RSibagatullin wrote:
Hmm,
I just checked the button and it says "Latch when pressed". Will changing event to "Value change" help me?
No, this will not help. In order for a latch action boolean to revert, it needs to be read by the code, i.e. be in the dataflow. If the terminal of the boolean is somewhere random on the diagram there is no garantee that it will get read after a press (e.g. If the terminal is outside the main while loop, it will be in the dataflow exactly once at the start of the program and then never again).
Why don't you attach a simplified version of your program so we can see where the problem is.
LabVIEW Champion . Do more with less code and in less time . -
I keep getting random ads pop up underneath my google search bar ?
I am not sure if my macbook has a virus because i keep getting random things pop up underneath my google search bar and id like some kind of antivirus for my problems.....as i am not sure if it is critical ???? anyone help me
Virus no, but it malware ..
Download and run the adware removal tool here > The Safe Mac » Adware Removal Guide
Easy, safe, and only takes a minute or two.
Make sure your OS X software is up to date.
Click the Apple top left in your screen.
From the drop down menu click: Software Update
Anti virus software is not necessary on a Mac. The pop ups are due to malware, not a virus. Do not click on advertisements in websites. -
Hi everyone,
I just upgraded to Logic Pro from Logic Express and have a question about the ESX24 sampler. I loaded a preset synth into ESX24 (something like "Saw Flanger", not sure of name...) and WITHOUT pressing a note on my MIDI keyboard, ESX24 is generating a very loud rumbling bass sound and firing off random notes that sound like high to low pitched signals. This happens with a few other presets, as well. I have tried to adjust different knobs and click on buttons within the ESX24, but nothing solves the problem.
When I press a note on my MIDI keyboard or the CAPS LOCK keyboard, the sound temporarily goes away then comes back. This happens even when I record, which adds unwanted sounds into my recording.
Can anyone help me understand what is happening? Do I need to restart my computer or is it something within the ESX24 that I'm not understanding?
Thanks,
- LogiclarkI have noticed something similar, with instrument tracks, but I don't think so bad. I noticed that sometimes, if I click off the Record button on one instrument track, and click it on in another rather soon (which, if I remember right, has the same instrument), one of them plays the full audio file of the instrument.
After that it seems OK. My audio files for instruments are long but don't loop, but if yours loop, that may explain the longer-term playing.
Try clicking the record button on and off on some different track and then go back to the one you want to record.
Hope this helps. -
Downloaded a file and now get random windows popping up
Downloaded a file from the net and now get random windows popping up
There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Hi Im getting random websites popping up on safari. Im using a Mac running osx 10.9. Checked pop up blocker and ran a scan with clam ax. However these sites still come up as I browse...Any Ideas ?
You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Selecting Random notes for transform function
Has anyone figured out a way to select 'random' notes? I have a series of guitar chords through out a song, and I want to randomly go in and shorten lengths so that every note has a different length.
I have used 'humanize' and just alter lengths. I do several steps of varying strength. I've tried by selecting sub-divsion of beat. etc..
But I couldn't figure out a way to only 'randomly select notes' to operate on.
Anyone have any insight to offer?
Thanx...As I said earlier, you can't do anything with the audio.
MIDI, I used a system similar to yours. I was creating auto drummers, auto bass parts & chord players for live backing tracks. ( I think this was in Logic 4 - 7. It can be done in Logic 8, but I use MainStage for live work now.)
The auto instruments created their own parts from a set of rules I gave each one. This meant that the backing tracks were always consistent in their feel, but never played a piece the same twice running. I did this as an experiment for several years with varying degrees of success. It was most successful with the George Shearing/Errol Garner styles of jazz harmony and with Latin & Afro/Latin rhythms. I had some useful results with Arab/Greek belly dance rhythms.
They were created in the Environment with a complex series of delay loops, transformers & chord memorizers. They took quite a while to build & the results did not always justify the time spent. The drums were the most useful, but Ultrabeat can do a similar job for much less effort. -
Memory slots on D7-6100 will not pop up
Trying to re-install memory after repairs on my D7-6185. Went down to shell for repairs Have double/triple checked rebuild.
H
Memory slots will not pop up to all install of memory cards. Nothing is blocking them physically. At the point of pulling out hair.
Ideas?????
MarieHi,
I can't find any D7 model. If a DV7, gently use your fingers to widen the latches and put it down a bit, it should pop up otherwaie use a thin plastic to help it to pop up.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am not able to email a file from Adobe Reader. When I click the button to share a file, there is no option for route from which to share (Message, Mail, Air Drop, etc. does not pop up).
What version of Reader and OS X?
-
[13" Mid 2012 not-retina] What is the max output resolution of my macbook?
Hi,
I'm in the market for a new external display. Maybe 21:9, maybe 4K, not sure yet.
I believe I have 3 options with the Thunderbolt(not mini-display)port on my Mac.
Using my mini-displayport to VGA adapter
Using my mini-displayport to HDMI adapter
Using just a thunderbolt cable
What would be the best to use? I believe that there are Thunderbolt displays on the market (AOC has a 21:9 one I believe).
What is the maximum resolution for an external display for my MacBook Pro? Does my mac support 4K? Does it support 21:9?
Thanks for your reply.
Specifications of my MacBook:
MacBookPro9,2
OSX 10.9 Yosemite
13" mid 2012 not retina
250GB SSD
16GB RAM
Intel HD Graphics 4000 1024 MBThe maximum resolution your MBP will support is 2560 x 1600. Thunderbolt connection would be the best. Your MBP does NOT support 4k displays.
http://support.apple.com/en-us/HT6008
Ciao. -
Help me-adobe flash player install box "run" or "saveas" will not pop open when I install or update
I have windows vista 64. I already have flash player13 and reader x 10.1.9 but I can not get FLASH back.
It wasn't working on youtube. So I tried to update it. Went to adobe and clicked the yellow button to check to see if I had adobe flash. It said I didn't have it installed. I then went to control panel and checked programs and IT WAS installed. So I deleted it. Then went back to adobe page and tried to re-install the newest flash player.
Again. . . the dialogue box that normally pops up to choose;run or saveas Will not and Does not POP! I re-set my cpu 3 times during the process in order to get a clean go at it too.
Anyway thanks for your help and let me know please.
ps I figure this is something that may be fine in a week or two. But I still want to know wtf happened here and what did I do wrong.
Thanks
peace
joshFlash Player for ActiveX (Internet Explorer)
Save that. Close your browser and run it. Then, it'll be installed.
Then, see: http://forums.adobe.com/thread/885448 and http://forums.adobe.com/thread/867968 -
ALV TOP-OF-PAGE not popping up
Hi I am working on ALV and I am trying to use Top-of-page functionality but somehow it's not popping up when I am trying to execute my report and just empty space is showing at the top of report. Following is my code:
perform data.
perform build_field_catalog.
perform top_of_page.
perform display_alv.
FORM TOP_OF_PAGE .
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Report Heading
wa_header-typ = 'H'.
wa_header-info = 'TEST REPORT'.
append wa_header to t_header.
clear: wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Time
wa_header-typ = 'S'.
wa_header-key = 'Time: '.
CONCATENATE sy-uzeit(2) ':'
sy-uzeit+2(2) ':'
sy-uzeit+4(2) INTO wa_header-info. "System time
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_output lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
FORM DISPLAY_ALV_REPORT .
call function 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE'
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
i_save = 'A'
TABLES
t_outtab = it_output
EXCEPTIONS
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
ENDFORM. " DISPLAY_ALV_REPORT
thanks,
Rajeev
ENDFORM. " TOP_OF_PAGEhi check this example..
REPORT ZTUFI091 .
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
*REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
regards,
venkat -
User POV does not pop up from Report in task list
Hello,
I've created a report within Related Content in HFM and added it to a task list--the problem I'm experiencing is when I run the report the User POV does not pop up, rather it simply uses the default POV (ie, whatever is set up in data grids or process management)--this happens if I try to run it directly from Related Content or from the task list. My preferences within Financial Reporting have already been updated to 'On' to preview the User POV and if I run the report from Financial Reporting (ie, Explore) the User POV works fine--so, it seems like adding a report to Related Content disables the User POV from popping up. I'm running on Financial Reporting v11.1.2.1 and HFM v11.1.2.1.104.3701. I can't find anything about it within this forum, knowledge base or as a known issue in the ReadMe for the .104 patch set for HFM.
Can anybody fill me in on if this is functionality by design or a defect?
Best regards,
Jason CallFinancial Reports do not work as you might expect when they are used as a related content item. As you already have realized, you will not be able to adjust the FR POV items from inside of HFM.
A 'work around' would be to link to the report and put that link in the Tasklist. This will then open the report 'normally' and you will get the POV functionality that you expect.
To find the link to a report, open the report's properties and look at the 'smartcut' value. (That is a URL directly to the report)
Maybe you are looking for
-
An error occurred querying a data source - with REST services
Hi, I have a SharePoint 2013 form library library with an info-path form. I need to get the logged in user's 'Display Name' on my form load automatically. I used REST service to fetch the current user details. In the preview mode of the form, its sho
-
How to retrieve PARTNER_NUMBER from IBRELATION/Partner view (Install bases)
Hi Experts, I've added an enhancement field in IBDETAIL/Header. Within the I-GETTER of this new field I need to retrieve PARTNER_NUMBER of a specific PARTNER_FCT (Partner Function), say '00000002'. IBDETAIL is one of the views in the component IBMAIN
-
PHOTO BOOTH problem with disapearing photos
Hi, Im having problems with photo booth... why isnt there a photo booth discussion board? Anyway.. my photos seem to disappear from the menu at the bottom after a period of time. When i go into the photo booth folder to find the photos, i find that t
-
TS4062 Have lost itunes music library from my iPad
Cannot access my iTunes music library from my iPad3. It was working fine until I installed iTunes on my netbook (windows 7) yesterday. That seemed to result in losing my music library on the iPad. I also have the iTunes account on a desktop pc. A
-
how can I get passed the sign in process it just keep asking to sign cannot get through to the programme?