Newbee question!

hi ,
supposing i use the following code..
<jsp:useBean id="requestInfo" scope="request" class="RequestBean" >
<jsp:setProperty name="requestInfo" property="*" />
</jsp:useBean>in the above case do all set methods in requestinfo object get called?
so in case if set methods are not defined in bean then wont the variables get set?
thanks
vivek

If you have parameters, but no matching set method, nothing would happen.
Other circumstances:
http://java.sun.com/products/jsp/syntax/1.2/syntaxref1216.html#8856
If a request parameter has an empty or null value, the corresponding bean property is not set. Likewise, if the bean has a property that does not have a matching request parameter, the property value is not set.
NOTE: this means that you can never clear a property using the jsp:setProperty tag. Empty string will never call setProperty.

Similar Messages

Newbee question - Headers Footer and menus

What is the current, best practice for building a web site with consistent menus, headers and footers etc.
I have read good and bad about SSI, and Dreamweaver libraries etc, and would like to know where folks in the industry turn to complete this kind of task.
I did a really simple site with php, www.canvasdoctors.com but someone told me that how I did that was overkill and not correct.
I hope i have been clear.
Thanks for your time.
Ashley

Thanks for the quick replies.
Now, I was just using the canvas site as an experiment.
And my question does not reallt relate to that site but more generically to the whole web design world.
If you were to start a whole new site, that would have lots of content, what technology is the latest and best way of managing the properties i spoke of and would allow for easy modifications to the entire site by only editing once?
Ashley

Newbee question (first of many though)

As soon as I can break through the initial intimidation I hope to begin learning Lightroom and cataloging my 15k+ images. Before I dive in though I'd like to begin with a handful of images and see how the program and my workflow (to be determined) will work. If I begin with an external flash drive and let's say 100 images just to learn a few things can I safely delete all traces and tracks of those images in the program before I begin my major work or is it advisable to simply uninstall the program then reinstall a fresh copy? Thanks. Looking forward to everyones help and generosity.
Andrew

Hi andyboy2. I believe your question is quite easily resolved. To remove a photo from the catalog, right click it in the film strip or grid view (in any module) This will bring up a series of choices, one of which is 'delete photo....' Clicking on this brings up a dialog box that gives you the choice of deleting the photo from disk (your hard drive) or just removing it from the catalog. Choose either the 'Delete from Disk' button for the 'Remove' button. (There is also a cancel button) Good Luck. LR is a lot to wrap your head around at first.

Newbee questions about XE application builder

Hi
I find that Oracle support someting that we can use to build some real database driven applications
i have some questions about it :
1-Does this application builder differ from Oracle 10g R2 Application builder ? i means is it limited ?
2-Does any one use it to build a real world application that works some where in some business place ?
3-what is its behind code and technology , does it use JSF and managed Beans ? how i can see the generted codes ?
Thanks

Hello,
Here's the link to the Application Express Forum Oracle Application Express (APEX)
You should also look at the Application Express OTN page, http://www.oracle.com/technology/products/database/application_express/index.html there is howtos tutorials all sorts of good stuff.
Carl

Xcode newbee question

Hi I'm new to xcode programming. But I'm starting to build an application for mac using xcode.
I can get the application to work, but there are several questions that I cannot resolve by myself.
First of all, how can I make the application to be "Universal Binary"?
Also, when I use the Interface Builder, I make my own classes, say "MAfoo." And write it out to xcode. But after I write down the class codes and modify them in xcode, whenever I make changes to Interface Builder, how can I change the previous version of codes without overriding the codes that I have written.
I'm sorry if my question is vague.

Brian is correct that universal binary is the default for Xcode 3, but make sure you're using the Release build configuration. The Debug build configuration cannot build universal binaries.
swingo wrote:
Also, when I use the Interface Builder, I make my own classes, say "MAfoo." And write it out to xcode. But after I write down the class codes and modify them in xcode, whenever I make changes to Interface Builder, how can I change the previous version of codes without overriding the codes that I have written.
You have to make the changes in Xcode. When you tell Interface Builder to write class files, it overwrites any existing class files.
A common situation is adding outlets and actions to your classes. What you have to do is open the header file in Xcode (MAfoo.h in your example) and add the outlets and actions. If you have your Xcode project open, the outlets and actions you added in Xcode will appear in Interface Builder.

Newbee - question fpr scripting

Hi, I'm new to scripting Acrobat and JavaScript (besides some Web-JS), but familiar to scripting InDesign (CS to CS3 with AppleScript). Now I'm on the challenge to do some Acrobat scripting.
Please let me know, if my problem could basicallybe solved with Acrobat scripting and please give me a bit of a startup.
I want to create an image check. Distiller converts the images to PDF. So I need to access the image in the PDF and extract information like: resolution, dimensions, color space, color profile.
I expect some problems, when pixel images where placed into a vector graphic. So I need the information, that blabla.eps is vector graphic, but contains pixel images with resolution, dimension, color space, color profile.
Do I have a chance to do such a thing by scripting?
Or does anybody has some other solution to this?
Thanks
Tobias

What you are looking to do cannot be achieved through script, but could be accomplished in C/C++ as a plug-in with the freely available Acrobat SDK.
http://www.adobe.com/devnet/acrobat/

Possible newbee question

I am thinking of buying apple tv and will mainly be streaming from my imac.
I have a wireless router.
I assume to rent a film the stream will go from the router to apple tv.
If streaming from my mac does the stream then go from my mac direct to apple tv ?
In other words the only leads will be the apple TV power lead and hdmi from apple tv to my tv.

I went and bought ATV and everything sorted just one problem I have is that I have just lost my HD on my mac and got a new one and replaced all my photos. I have synced the photos to my ATV but they are just in one group. As I have best part of 8000 photos its is impossible to view any easily. I was expecting the events to be carried over from iphoto and making things easier to navigate.
Is it because when recovering my hard drive its classed the photos as being all one date ?
Whats the best way to order photos on ATV.
Cheers

Waveburner Newbee question on plugin use.

Just attempting to do my first master on a trial basis.I have Waveburner but used it only once to burn a CD & not really 'master'.I have mixed & bounced 10 songs.Now I need to master those 10 songs with softwares like Ozone etc that I have.For mastering each song do I first import into a new logic project & then master it or do I do all songs on Wave burner?I presume it would be a good idea to import it into logic & get that induvidual song mastered & then import it into wave burner & do an overall master (using eqs,etc) to get a balance between all songs.Do let me know which would be the right approcach.Is it possible to use different plugins for different songs on wave burner or will the plugins that I use for 1 song affect all the 10 songs at the same time?
I know I sound very ameteur & from what you hear, mastering myself may not be a good idea.But I want to give it a shot so do give me some basic guidance.Too many videos on youtube & too many books out there on mastering is just too much to handle ! So I will start with your opinion.
Thanks

Mastering your own mix is like writing a critique on whther your girlfriend (boyfriend) is pretty (handsome), and what would you change? You get so close to it that it becomes difficult to tell. Plus you are (presumably) mastering in the same room as you have mixed it in, so you actually have the possiblility of compounding your room deficiencies. Plus, it's quite a different skill, and requires a much more logical, reasoned and scientific ear. Most producers and artists run on emotion. It's much better to have someone else who has the tools, skill sets, cool head and detached ear to review what you have done .
BUT
If you must (and some of us must, for various reasons) you could do it in Logic, or equally easily in Waveburner. You really haven't looked at it much, have you? You can of course separately assign plugins region by region (i.e. song by song) as well as plugins to the overall collection (mix plugins). It's actually a great tool, because you can check the songs against one another while still tweaking the settings. And then maybe have a final safety limiter very gently on the whole project. Or not, if you are philosophically opposed. In the menu in each case, you have audio units plugs (3rd party) and waveburner plugs (Logic).
Bravey go....

Newbee Question to SQL Statment ..

Hello,
what does the statment PRODWH refer to in the statment below ....?
what s the function of {?PRODWH: F_INVOICES.PROD_ID}. Is it an Input Parameter for the user ?
ist the statment "external Join" replaceble trough Right/left Join ..?
SQL Statment-------------------
PRODWH
SELECT
"D_PROD_DESC"."PRODUCT_DESC_SHORT",
"D_PROD"."SKU", "D_PRODUCT"."BU_DEPARTMENT",
"D_PROD"."PROD_ID"
FROM
"D_PROD_DESC" "D_PROD_DESC" INNER JOIN
"D_PROD" "D_PROD" ON
"D_PROD_DESC"."PROD_ID"="D_PROD"."PROD_ID"
EXTERNAL JOIN D_PROD.BU_DEPARTMENT={?PRODWH: Command.BU_DEPARTMENT} AND
D_PROD.PROD_ID={?PRODWH: F_INVOICES.PROD_ID} AND
D_PROD.SKU={?PRODWH: D_OLD_CUST.BU_SKU}
-----END----------------

The Database is Oracle but the SQL statment is generated by Crystal Reports XI

NewBee question - Import statements

Hi,
I am new to Bea workshop.
Can someone help me out in how to add my own Import statements in Java classes
created in workshop.
Thanks and Regards,
Nikita

Hi Nikita,
Welcome to Workshop!
The JWS classes used in Workshop are essentially Java classes with the
additional capability to understand the JWS metatags in the comments.
Hence you can use the import statements in the same manner as you use in a
normal Java class.
Please do let us know if you have any further queries.
Regards,
Anurag
Workshop Support
"Nitika" <[email protected]> wrote in message
news:[email protected]..
>
Hi,
I am new to Bea workshop.
Can someone help me out in how to add my own Import statements inJava classes
created in workshop.
Thanks and Regards,
Nikita

Newbee question: Limiting Access

Ok, here the situation.
In my school, I would like to be able to block temporary access to internet or other software to my students individually or globally if needed. Is it possible to do that with ARD? I log to one of my student station and block his access. Possible? Right software? I'm new in the Mac World.
I would like to know what is your experience using this software in a *school lab*? Happy with this software. What is good? What to avoid? Thanks for your help!
Roch

Todd Lichtenwalter1 wrote:
I have the same need. Specifically, I need to be able to temporarily disable iChat without having to go into the pref. pane for each machine to deactivate it. (MediaCenter, this is done SystemPre/Accounts)
But I am with ya, along the lines of "Remote Locking" the screen, teachers need the ability to allow students to work on the desktop but not have access to instant messaging at certain times- this addition would be much appreciated in RD4.
-todd
I don't think that this is an option within ARD, but if you are running Leopard, there is a new Preference Pane called 'Parental Controls' that works much like you require. It allows you to set time limits on specific software and internet usage. That sounds like what you are looking for.

Newbee question - Track mods?

I want to create a CD of some songs from my library (iTunes based) for my spinning class. I would like to shorten several tracks and add a fadeout effect so it sounds professional...not cheezy. Are there affordable Apps for doing this easily? I only indtend to use these mod tracks within iTunes.
iMac Duel Core Intel Mac OS X (10.4.5) 512MB

Bill
Audacity is an open-source (as in free) sound editor.
http://audacity.sourceforge.net/
Regards
TD

Newbee question - save as flv

I managed to make a simple animation and now want to save as flv or fl4. I looked at the various Save As and Export choices under the File menu, but don't see a way to save as flv or fl4.
I would greatly appreciate it if anyone can help.

I don't think you can create a .flv/f4v with Flash, they are video container formats.
If it's just a simple animation, I'd suggest you try "Export" as an .avi and then use Flash Media Encoder to transcode to .flv/f4v. FME should be a part of your Flash Suite:
http://help.adobe.com/en_US/Flash/10.0_UsingFlash/WSBC0687D4-42A6-445d-B5FF-8032C7D3A8FF.h tml
But check the .avi after export... somethings don't export completely.
Best wishes,
Adninjastrator

Newbee question - will this work?

I want to use RoboHelp to create a winhelp version for a
desktop
application and a webhelp version that will contain more
up-to-date
information as material is added/expanded. Perhaps
downloading new
winhelp versions to upgrade the desktop help. It looks like
this
should work.

Hi joe-delphinus and welcome to our community
Hmmm, you seem to be referring to something called Airplane
Help. I posted an article on it that you can read by
clicking
here.
However, I'm not sure they ever developed it to work with
WinHelp files. I think it was a .CHM only feature.
Cheers... Rick

Newbee-Question: Connection without RFC / SM59

Hello!
In classical R/3-Systems you have chosen a RFC-Destination to connect serveral R/3 systems together. What about Netweaver?
I saw there is a Message Server, is that the point where R/3-Systems are connected together concerning netweaver technologie? Or are they even connected together via RFC? Or only Webservices?
How can you create a distributed system with many Web AS-Servers?
With best regards
Björn K.

Hi Björn,
for connection between XI and R/3 system are usually 3 methods used:
ABAP proxy
RFC adapter
IDoc
For all three communcication possibilities you need a destination in SM59.
Regards,
Udo

Newbee question!

Similar Messages

Maybe you are looking for