Newbie having trouble with M-Audio Interface

I'm probably overlooking something obvious, but I cannot get my M-Audio FireWire 1814 to be recognized by my Mac, I've reinstalled the software multiple times and still it tells me that there is no device. (I've been careful not to hot-plug the FireWire connection). Here's my setup: IMac, (running OS X.4.8), Logic Express, M-Audio FireWire 1814, and Korg Trition Studio. I'd appreciate any help.
-Crog
IMac   Mac OS X (10.4.8)  

i don't think that is what the org poster meant. i think they were meaning that he hasn't blown his firewire connection, and that he is letting the m-audio driver load at startup.
i don't think that it had anything to do with m-audio being hot plugable.
FP

Similar Messages

  • I down loaded ios7 and now I'm having trouble with my audio on Skype, does anyone knows how to fix it? Please help!

    WWith the new ios7, I became frustrated in using my iPad3..I'm using Skype as my main communications with my love ones back home,now it seems that ios7 doesn't help me a lot for I'm having trouble with my audio communication coz my family can't hear anything from me.. My skype doesn't have any options or settings that I can check with to see if I can fix it...I need help...please if any of u knows how to fix it..I would greatly appreciate it...

    You can try removing app then reinstalling. If that doesn't work
    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • I'm having trouble with the audio on a lot of my games. How can that be fixed?

    I'm having trouble with the audio on a lot of my games. How can that be fixed?

    You need to be more specific. What sort of trouble - no audio, low volume, scratchy sound, etc.?
     Cheers, Tom

  • Newbie having trouble with opt/rep regions

    Hi everyone. I'm migrating my site from simple, square html
    to nice, elegant css. I've done most of the work, but I'm having
    some trouble with templates. Here's an example of how a page
    created with a template will (hopefully) look:
    http://www.technfun.com/temp/example.html
    I've succeeded in making the article region (inside the white
    frame) editable, but I can't figure out how to handle the side bar
    menu. It's supposed to contain links to the chapters and
    subchapters of the main article, so that clicking there will bring
    you to the right place in the page (a simple # link, in other
    words). However, the article writer (me) needs to be able to add as
    many "SidebarLarge" entries as necessary. Under each of those there
    may or may not be the need to add "SidebarSmall" entries for
    subchapters.
    I read the help file and figured out I need to do something
    with the optional and repeating region settings, but whenever I try
    I only ever manage to make a mess of the sidebar. Anyone can tell
    me how exactly I'm supposed to do this?
    Thanks :)

    Why not just make the whole sidebar an editable region
    instead? Then you
    can add as much stuff as you see fit.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "TechNFun" <[email protected]> wrote in
    message
    news:gda2tq$2v9$[email protected]..
    > Hi everyone. I'm migrating my site from simple, square
    html to nice,
    > elegant
    > css. I've done most of the work, but I'm having some
    trouble with
    > templates.
    >
    [url=http://www.technfun.com/temp/example.html]Here[/url]'s an
    example of
    > how a
    > page created with a template will (hopefully) look.
    >
    > I've succeeded in making the article region (inside the
    white frame)
    > editable,
    > but I can't figure out how to handle the side bar menu.
    It's supposed to
    > contain links to the chapters and subchapters of the
    main article, so that
    > clicking there will bring you to the right place in the
    page (a simple #
    > link,
    > in other words). However, the article writer (me) needs
    to be able to add
    > as
    > many "SidebarLarge" entries as necessary. Under each of
    those there may or
    > may
    > not be the need to add "SidebarSmall" entries for
    subchapters.
    >
    > I read the help file and figured out I need to do
    something with the
    > optional
    > and repeating region settings, but whenever I try I only
    ever manage to
    > make a
    > mess of the sidebar. Anyone can tell me how exactly I'm
    supposed to do
    > this?
    > Thanks :)
    >

  • Newbie having trouble with template highlight (button)

    Stupid question I'm sure, but for the life of me I can't figure it out:
    When using a template, if I change anything at all about the TYPE related to a button, or the size of the button/text group, the corresponding HIGHLIGHT gets freaky. I can't for the life of me figure out how to control where that highlight appears, or even it's size, etc. So I have these beautiful DVD menus that are marred by weird highlight bars--some of them run across two buttons.
    (Yes, I figured out how to make the highlights invisible, but that defeats the whole point of course.)
    Hope my question wasn't confusing. Any help would be wildly appreciated. Thanks...

    Okay, let me pose a theory: Is it possible my installation is having trouble, in other words is what I'm seeing NOT normal?
    Can anyone verify (it would only take a few minutes) my findings? Here are the steps: Create a brand-new project using (just to make sure we're on the same page) the Apple template called "Wedding Classical Index." Next, resize any one of the main elements (labeled "button 1," etc.). OR, change the text to two words, or modify the text size/font. When finished, hit the Simulate button and mouse over the button you modified.
    Does the highlight look normal, e.g., underneath the text, etc., or has it moved to the side of the text, or changed into a vertical line, or worse?
    I just want to verify that my installation isn't being screwy. Thanks to the kind soul who takes a minute to help me out with this so I can move on...

  • I am having trouble with my audio software and CoreAudio (seemingly)

    Hi. I use my computer to run several audio-based programs on my Macbook such as Logic Pro, Ableton Live and junXion. Today, when practicing a laptop-based set with a friend, I used firewire into a Digidesign interface (I can't remember the exact make). In order to get this connection to work, I installed Avid's 002 firewire drivers.
    Everything worked fine, however later on, after I had disconnected and shut down etc, I was unable to open any of my software that requires CoreAudio. This is quite worrying honestly. They just bounce on the dock for a while but do not open. It seems to stop when it gets to 'Checking MIDI Drivers', and then eventually (after quite a while might I add), it estimates that something is wrong with the MIDI drivers and asks to restart. I have done this several times but nothing has changed.
    I noticed that in my audio devices (both input and output), it still says 'Digi CoreAudio Device', even though I am obviously no longer connected to that. I decided to try deleting the 002 firewire drivers from Avid, but this came to no avail, and it still says on my audio devices that the Digi CoreAudio Device is still there.
    What is the problem here? Can anyone help me?
    Fortunately, my Alesis M1 Active 320 USB monitors still work, and appear in my audio devices whenever I plug them in, and then disappear when disconnected. But it seems that something relating to to these Avid drivers have truly caused everything to go haywire.
    Any help would be hugely appreciated.
    Thank you.
    Ben
    Here are some screenshots. Please let me know if you wish to have more informtion.

    Aha! I have sorted it.
    For those with similar problems, the solution is this:
    Macintosh HD > Library > Audio > MIDI Drivers
    Then delete DigiDioMidiDriver.plugin

  • Newbie having trouble with searching for apps.

    I'm an experienced an experienced Windows user, finding myself surprisingly lost on my new iPad and iTunes.
    (Surpising because, although I'm used to dealing with oddball and sometimes frustrating things on Windows,  I had heard the Mac and iPad interface fast simpler to navigate and more frustration free.)
    So please excuse what may seem like dumb newbie questions about what should be, and probably are to you experienced iTunes and iPad users, simple things:
    For starters:
    I'm search for a few apps in the app store that I know for sure exist and know the exact names:
    One is the
    iPad User Guide
    The other is
    the AOPA flight planner app.
    I know it exists because it's installed on my wife's iPad. Can't remember how I found it on her iPad.
    When I use the apps store search box (whether I do it in the app store in the iPad or in iTunes on my Windows 7 computer)
    I keep failing to find them.
    I've tried putting
                           iPad user guide
                            AOPA flight planner
      or even just                AOPA
    in the search box in both environments and clicking the search (magnifying glass) icon.
    I either get a mess of apps with  AOPA in the name (but not the one I want)
    or a message saying the equivalent of "sorry... not found." 
    What the heck am I doing wrong?
    All help appreciated.
    Alex

    You are not doing anything wrong. Those apps just do not appear to be available any more.
    They will always be available to your wife since she downloaded them and they are backed up in her iTunes Library (assuming she synced it with iTunes since downloading them) but it would appear that anyone else trying to find them will be unsuccessful.
    These are not dumb questions nor are they trivial concerns. The whole digital distribution method has many advantages, but you just ran into one of its drawbacks.
    "Ownership" of software was always a controversial subject, but the way things are going the argument will soon be a moot point... unfortunately.

  • Having trouble with a audio file. Need help please!

    Hello. 
    This may sound funny and not to related to any of this at first, but if anyone here knows about the game portal, then they know about the ARG that went on during last week and may even still be continuing. None of thats really important but if anyone cares to know, basically VALVe released a new update with 30 new sounds, 26 of them moarse code/sstv pictures. 3 of them called dinosaur_fizzle 1 2 and 3. Infact, each one was named dino_1 dino_2 and so on. 
    The main sound that no ones been able to crack is called Dinosaur_noise. Its obvious there are voices in it and its some sort of major clue, this file is way out of league with the other ones. No ones solved it 100% or cleaned it enough to make basically anything audible.
    Now this started March 1st. Since then i have worked hours on the audio file. I have gotten close, but not close enough.
    Thats why im turning to someone here, that can do a through analysis of the audio that adobe or reaper just cannot do.
    In the attachments is the original file itself with no editing what so ever.
    Heres some collected data. 
    Frequencies of interest
    An analysis was undertaken to find the strongest frequencies acting within "dinosaur_noise". Linear and Logarithmic curves showed sets of dominant figures, with the most being:
    Frequency (Hz)
    Comments
    9092
    Largest spike before silence
    7862
    Very faint
    7812
    Very faint
    7657
    Very faint
    7502
    Largest spike in the 4000-9000Hz band
    3502
    various noise between 3502 and 3510
    360
    Another very visible wave. This was the most pronounced visible wave in the Logarithmic scale
    35
    The most dominant low frequency wave
    There are a few standout segments, not of voice data underneath, but visible clicks or something happening about 5 times. These could be indications of splices or other manipulations going on. The largest noticed broad-spectrum spikes were:
    Time(in samples)
    Comments
    55402
    First broad spike
    422931
    Second broad spike
    751643
    Third broad spike
    1081537
    Fourth broad spike
    1110841
    Fifth broad spike
    Silence in the frequency ranges is located in the band of 10.567 - 15.337 KHz. All frequencies above that are likely to be high frequency poinoning from the FFT process. 
    Heres what i know personally.
    -Noise reduction makes it a lot worse and adds strange harmonics and artifacts.
    -Most filters do the same.
    -Clear voice around 15 that says THATS AMAZING.
    If anyone cares to help I would appreciate it so much.
    Here are some links that might help.
    http://www.snotmonkey.com/work/school/405/methods.html
    http://pastebin.com/r90fEtnd C++ code
    Actual files in attachments 
    Attachments:
    dinonoise.zip ‏2554 KB

    LabVIEW has a sound and vibration toolkit.  Do you have that?  Do you have LabVIEW?
    The forum is made up of volunteers who will help others with their LabVIEW problems.  But you need to have a specific problem and ask clear questions.
    What you are asking for is very unclear.  Why do you even want to do a "thorough analysis of the audio"?  No one is going to do your project for you.

  • Newbie having trouble with keyframes

    I'm a newbie to Flash, and have just started going through
    the online tutorial here:
    http://www.adobe.com/devnet/flash/articles/intro_flash_pt2_04.html
    This is the problem I'm having: In the section "Creating a
    frame-by-frame animation", when I have created the symbols, and
    want to edit them, the Properties Inspector shows that the images
    are bitmaps, not movie clips. Why is this? Shouldn't they have
    become movie clips when I created the symbols, renamed them, and
    saved them as movie clips? Is there something I'm doing wrong?
    Thanks in advance for your assistance.
    Text
    http://www.adobe.com/devnet/flash/articles/intro_flash_pt2_04.html

    Did you have the bitmaps selected and chose "Modify - Convert
    to Symbol" (F8) when you "created the symbols"?
    Or did you select "Insert - New Symbol" (Ctrl-F8)? This would
    of course have created empty movieClips and left your bitmaps
    untouched.

  • Brand-newbie having trouble with "paste into"

    I am teaching myself InDesign using tutorials and just tried to use the "paste into" function unsuccessfully.  I have a document with a picture of a dog (a black silhouette) and a picture of a polkadot pattern.  I selected and then cut the pattern one, selected the dog, and went to try "paste into" but the option was not available.  I rewatched the tutorial and it's exactly what was shown (there was a picture with a pattern that was then pasted into a black airplane photo).  Any idea why I wasn't able to do it?  Thanks.

    This is the video tutorial I watched, if anyone has a minute to check out the part I'm trying to replicate.  It is at 7:40.  I guess I need to know how the instructor got the "picture" of the plane there in the first place so I can do the same with my dog silhouette.  I downloaded an image of a dog and did Command D to drop it in.  Forgive me if I'm using the wrong terminology...
    https://helpx.adobe.com/indesign/how-to/indesign-add-text-to-frames.html?set=indesign--fun damentals--create-artwork

  • Anyone else having trouble with the audio mixer?

    I can still adjust levels of individual tracks in real time, but the sliders don't visually move with my mouse. If I stop playback and restart it, the sliders then jump into position where I dragged them. It's like an invisible mixer fader system... This has only been happening since I upgraded to FC Studio 6.
    Any suggestions? Should I trash preferences or something? Remind me how to do that, if you don't mind.
    Thanks all - happy editing.
    -Pete

    #44: FCP acting weird - Trash Prefs
    Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
    If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
    1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at FCP RESCUE and run it.
    2) Open the Disk Utility and Repair Permissions.
    3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
    4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.

  • Newbie Having Trouble with MaxDate

    First let me say that I am pretty new to writing code, so I apologize if I don't use the correct terminology. Now to my issue. I'm trying to write a query that will return several date fields. The problem is that there can be several instances for each primary key, so I want to see the Max Date of each instance. I've googled and googled, but I don't seem to be finding the right answer. Additionally, I have a couple of fields in particular that raise an issue. I have instances where a primary key is showing up multiple times because the Template field can have multiple entries. I can't seem to figure out how to write the code that only pulls in the Template value of A in the event an A and C are present.
    Output
    P_Key Template Template_Removed_Date
    1 A
    1 C 10/23/11
    2 C 08/15/11
    2 C 04/12/10
    2 C 12/05/09
    Desired Output
    P_Key Template Template_Removed_Date
    1 A
    2 C 08/15/11
    Any assistance you can offer would be greatly appreciated!!
    Also, if there is any online training that would be of assistance to my cultivation in PL/SQL, please let me know.
    Cheers!

    This doesn't have anything to do with Oracle Designer. You should ask this in the SQL forum.
    Anyway, your design is wrong:
    The problem is that there can be several instances for each primary keyThat is NOT possible. A primary key is a unique value. It is impossible, if you create the PK properly, to have more than one instance. So, you probably mean something else, but ask this in the SQL forum.

  • Newbie having trouble with iCloud

    Hello-
    I was at the Verizon Store today for 3 hours trying to learn the basic of the iPhone 5. There is a lot for me to learn, but one day at a time. For some reason I was able to use my iTune sign-in info for an App that required it and I can sign into apple.com/support and apple.com to get to the forums, but when I try to sign into icloud it keeps telling me that "Verify Your Account" This apple IDs email address cannot be verified. Change your Apple ID's email address at appleid.apple.com to sign in to iCloud."
    If I change my iCloud email address will this mess up me being able to sign into iTunes and the other places I use my Apple ID?
    Is the Apple ID the same as the iCloud sign-in information? It says under iCloud. Apple ID and Password. I have tried it literally 30 times and it still will not sign me in.
    should I change my Apple ID or does anybody know what the hang-up could be? Occasionally I have had an issue signing in to apple.com/support where it has said you cannot use an email address, but I click sign in again and it signs me in. I have had the same apple ID and password for years with no issues really until I got this iPhone and tried to sign into iCloud.

    I never had this problem.  I went to the apple support page for setting up icloud and it said to use the same info you use to sign into itunes.  I realized that one had my email address as minus the @gmail.com and one had it added at the end. I just added it to the one that did not have it, clicked slect and agreed to the terms and I got an email saying Welcome to the icloud.  then i used what I had already put in the iPhone 30 times and this time it accepted it.  therre were so many people at the Verizon store trying to figure this out.
    It asked me now if I want my contacts and all to go the the Cloud? I selected Yes, was that the right thing to do?
    So what does this allow me to do now because it obviously did not affect me getting into iTunes or the App Store like the support article said it should.  the article said it is BEST to have the same Apple ID for iTunes, Icloud, etc.
    It is now saying 5 GB Free and under that payment information.  Does sending the stuff I clicked Yes to cost?

  • Having trouble with HDMI audio out or earphones audio out

    I have a new 13 MacBookPro running Snow Leopard. I would like to connect to my TV. (I put on Lion and couldn't get it to find the TV at all. I reloaded Snow Leopard and udated the software on the MacBookPro and on the TV itslef. I can't seem to get the audio to go out to my TV using an HDMI cable or the earphone jack. I have tried adjusting the audio in System Preferences > Sound. When I unplug the wire connceting the headphone jack to the TV it plays through the internal speakers. Any ideas?

    Sonicray, I have checked my owner's manual and it does say that an additional audio cable may be required. I thoroughly looked over the manual and can find no place where it talks about enabling audio for HDMI. I already have the Moshi Mini DP to HDMI Adapter that is advertised on the Apple Store. I wouldn't mind even using the separate audio cord. Just wish it would work.

  • Newbie- having troubles with background color when opening new document

    Hey everyone and thanks for the help in advance. New to the forums and haven't been able to find the answer online. Whenever I open Photoshop (using Adobe Creative Cloud) I set my size, my background to white, etc. The document always opens looking like this: http://screencast.com/t/BzCYc4akl
    Almost like it's transparent but I don't have that selected. Can anyone help here? Thanks!

    Hi,
    It looks like the Grids are enabled.
    If in photoshop you go to View>Show and click on the word Grid, does that make a difference?

Maybe you are looking for