News ALERT: It's Not iDVD ..It's iMovie!!!!!! Audio Encoding

I'm very sorry but I found the prooblem:
When iMovie 'encodes the audio' ... it falls apart..
I saved the iMovie 'video & audio' to my camera .. and that is when the audio 'crapped out' .. for whatever reason. Which you would never find this unless you watched ( and listened ) to the tape.
The PROBLEM IS WITH iMOVIIE!!!!!!!!!!!
I hope that this resolves my recient posts.

When iMovie 'encodes the audio' ... it falls apart..
When does iMovie encode audio? When importing some non-AIF format or some non-48kHz audio? Could you give more info about the problem, please.
I know that iMovie can introduce pops or gaps during a title or transition or that sometimes there might be audio sync issues but I'm not aware of other audio glitches. Sometimes there may be audio tracks missing but this might be an user error, too.
http://docs.info.apple.com/article.html?artnum=107945

Similar Messages

  • IOS 5 - New Alert Tones not playing

    After updating to iOS 5, I purchased some new Alert Tones to customize my notifications (text, calendar, etc..), BUT the new tones will not play when my notifications pop up.  I switched back to the default tones and it worked fine and I get the sound, but anytime I switch to any of my purchased tones I don't get any sound.
    Anyone else experience this?

    After messing with it for a while, I finally rebooted the phone and the sounds now work.

  • I needed idvd, but since my iMac is newer, I didn't have idvd on it. I installed iLife 11. I should not have installed the iPhoto part because it was 9.1 and my iMac was 9.2. So now my iPhoto wouldn't work. I went to iPhoto Library organizer.

    I needed iDvd, but since my iMac is newer, I didn't have iDvd on it. I installed iLife 11. I shouldn't have installed the iPhoto part because now my iPhoto wouldn't work since iLife 11 was 9.1 and my iMac had 9.2. So I used iPhoto Library Manager to create a new library. That was working, but my computer ran out of hard drive room since my original iPhoto had 137 GB of photos. My new iPhoto library had the majority of my pics and the iPhoto now worked with those pics. But now I still had all of those original pics in my hard drive. I thought that by getting rid of the original iPhoto on the iPhoto Library Manager I would get rid of all of those original pics. I now have no access to them but they are in my hard drive and I can't do much with my iMac because it is all clogged up with those original pics - I think. How do I get rid of my original iPhoto pics out of my hard drive?

    What system are you running?  If it's Mt. Lion go to the App Store and sign in with the Apple ID you used to purchase the Mac.  Go to Purchases and download iPhoto again. The current version is 9.4.3.
    If you're unable to download iPhoto from the App Store you can reomstall iPhoto from the iLife 11 disk and  update it from the Apple Downloads website  to the highest version you can get to (I was able to update all the way to 9.4.3 via the updaters). Then if iPhoto can't open the library  use iPhoto Library Manager to rebuild it and it will rebuild it compatible with your version of iPhoto via this iPLM tutorial: Fat Cat Software - iPhoto Library Manager Help - Downgrading a library to an earlier version of iPhoto
    OT

  • HT1848 I purchased alert tones in itunes and updated my itunes.  Now my alert tones do not show up, although if I were to go re-purchased those items, it says I already purchased them.  Where do I find those tones and how do I get them back into my phone?

    I purchased many alert tones in itunes and then updated my itunes.  Now my alert tones do not show up, although if I were to go re-purchase those items, itunes says I already purchased them.  Where do I find those tones and how do I get them back into my phone without having to repurchase????  This is so frustrating!  Please Help!

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • Email Alert Template Issue - List Alerts (Alert Me) emails not using customized XML alert template

    We have recently customized the XML alerts template (AlertTemplates.xml) for our site collection in SharePoint 2010 to exclude specific fields in the email when users who have subscribed using the "Alert Me" feature. We have renamed the
    custom alerts XML file and loaded the custom template in the following directory (%ProgramFiles%\Common Files\Microsoft Shared\Web server extensions\14\TEMPLATE\XML) and restarted IIS.  Once users subscribe to the alerts using the list "alert me"
    function they received the customized email as intended.
    We needed to auto-subscribe users to the email alerts so what we did was use a powershell script to add users to the alert subscriptions using the script shown below:
    Import-Csv D:\Temp\filename.csv | ForEach-Object{
    $webUrl=$_.WebUrl
    $listTitle=$_.List
    $alertTitle=$_.AlertTitle
    $subscribedUser=$_.SubscribedUser
    $alertType=$_.AlertType
    $deliveryChannel=$_.DeliveryChannel
    $eventType=$_.EventType
    $frequency=$_.Frequency
    $oldAlertID=$_.ID
    $web=Get-SPWeb $webUrl
    $testAlert = $web.Alerts | WHERE { $_.ID -eq $oldAlertID }
    IF ($testAlert) {
    $web.Alerts.Delete([GUID]$oldAlertID)
    Write-Host Old alert $oldAlertID deleted. -Foregroundcolor Cyan
    $list=$web.Lists.TryGetList($listTitle)
    $user = $web.EnsureUser($subscribedUser)
    $newAlert = $user.Alerts.Add()
    $newAlert.Title = $alertTitle
    $newAlert.AlertType=[Microsoft.SharePoint.SPAlertType]::$alertType
    $newAlert.List = $list
    $newAlert.DeliveryChannels = [Microsoft.SharePoint.SPAlertDeliveryChannels]::$deliveryChannel
    $newAlert.EventType = [Microsoft.SharePoint.SPEventType]::$eventType
    $newAlert.AlertFrequency = [Microsoft.SharePoint.SPAlertFrequency]::$frequency
    if($frequency -ne "Immediate"){
    $AlertTime=$_.AlertTime
    $newAlert.AlertTime=$AlertTime
    $newAlert.Update()
    Write-Host Created $newAlert.Title for $subscribedUser . -Foregroundcolor Cyan
    } ELSE {
    Write-Host Alert $alertTitle for $subscribedUser already done. Moving on. -Foregroundcolor Magenta
    When we ran the script and added the users and restarted the service, all users who were auto-subscribed via this method get the email without the customizations that were done in teh custom alert template.  All users who manually subscribed on their
    own to the list using the "Alert Me" function would get the customized email.
    Does anyone know why users who manually subscribe to the alerts get the customized email, and users who were auto-subscribed using the powershell script do not get the customized email and get the standard generic email template?

    Hi  ,
    According to your code, it create a new alert using SPUser.Alerts.Add() method. For this method, it will create a new alert based on the predefined alert template by default.
    If you only assigned the custom alert template to the list, users who manually subscribe to the alerts get the customized email, but users who were auto-subscribed using the PowerShell script get the standard
    generic email template.
    For your issue, you can set the new alert ‘s alert template:
    http://social.technet.microsoft.com/Forums/en-US/1b19c12f-fc37-48cf-8b59-6c09f095dc23/custom-alert-email-templates-issue-list-alerts-emails-not-using-customized-xml-alert-template?forum=sharepointgeneralprevious
    Here is a good blog you can have a look:
    http://blogs.msdn.com/b/sharepointdeveloperdocs/archive/2007/12/07/customizing-alert-notifications-and-alert-templates-in-windows-sharepoint-services-3-0.aspx
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me

    Please I need help regarding this problem I faced today.
    I updated my payment method because I changed my Internet MasterCard of the same number but  new expiry date but not accepted , can you help me?

    Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
    Errors related to downgrading iOS
    The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

  • Cannot allocate new log, sequence Checkpoint not complete

    Hi,
    Im having very frequent log switches and Im getting error as
    " cannot allocate new log, sequence Checkpoint not complete"
    I was having 3 redo log groups with 50 MB each. After I found this error in the alert log; I increased teh number of redo log groups to 6 with 50MB each. Still the issue is not getting resolved.
    Please suggest what will be the best solution for this.
    Following is a snippet from alertlog.
    ==================================================
    Sun Apr 19 09:14:08 2009
    Thread 1 advanced to log sequence 5811
    Current log# 2 seq# 5811 mem# 0: /u01/app/oracle/oradata/mview/redo02.log
    Thread 1 cannot allocate new log, sequence 5812
    Checkpoint not complete
    Current log# 2 seq# 5811 mem# 0: /u01/app/oracle/oradata/mview/redo02.log
    Sun Apr 19 09:14:18 2009
    Thread 1 advanced to log sequence 5812
    Current log# 3 seq# 5812 mem# 0: /u01/app/oracle/oradata/mview/redo03.log
    Thread 1 cannot allocate new log, sequence 5813
    Checkpoint not complete
    Current log# 3 seq# 5812 mem# 0: /u01/app/oracle/oradata/mview/redo03.log
    Thread 1 advanced to log sequence 5813
    Current log# 1 seq# 5813 mem# 0: /u01/app/oracle/oradata/mview/redo01.log
    Thread 1 cannot allocate new log, sequence 5814
    Checkpoint not complete
    Current log# 1 seq# 5813 mem# 0: /u01/app/oracle/oradata/mview/redo01.log
    Sun Apr 19 09:14:32 2009
    Thread 1 advanced to log sequence 5814
    Current log# 2 seq# 5814 mem# 0: /u01/app/oracle/oradata/mview/redo02.log
    Thread 1 cannot allocate new log, sequence 5815
    Checkpoint not complete
    Current log# 2 seq# 5814 mem# 0: /u01/app/oracle/oradata/mview/redo02.log
    Thread 1 advanced to log sequence 5815
    Current log# 3 seq# 5815 mem# 0: /u01/app/oracle/oradata/mview/redo03.log
    Thread 1 cannot allocate new log, sequence 5816
    Checkpoint not complete
    Current log# 3 seq# 5815 mem# 0: /u01/app/oracle/oradata/mview/redo03.log
    Sun Apr 19 09:14:44 2009
    =========================================================
    Regards
    Pratheej

    Anand... wrote:
    Hi Sir,
    Although i too had suggested increasing the redo logfile size, but after going through [http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:69012348056] i was little confused as Tom has mentioned
    Another way is to make the log files smaller, hence increasing the frequency with which we checkpoint ---- Can you explain why so.
    I was a little surprised when I read that posting - but noticed it was dated May 2000 - when databases were still quite small and less busy. (And Tom suggested 25MB as being "modest" rather than "tiny" - which is probably what many people would call 25MB these days). And May 2000 probably means 8.0 or 8.1 - and the whole log buffer, redo generation, checkpointing technology has changed a lot since then.
    Basically, if you hit "checkpoint not complete", you need more online log space so that it's possible during the busiest times to keep generating redo log information while the checkpoint queues are being cleared far enough to allow older log files to be recycled.
    You can do this by adding more log files, or by increasing the sizes of the log files you use. Tom's point, I think, was that if you chose the option to add more files and kept them small (or even made them smaller) then the volume of dirty data blocks that you could create while filling a log file would be small, so the database writer wouldn't have to do much work to make each log file available for re-use. (I'm not sure I'd agree with the approach, though - even for 8i - because it could easily lead to an increase in the volume of datablocks written, even if it did bypass the checkpoint issue).
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    http://www.jlcomp.demon.co.uk
    "For every expert there is an equal and opposite expert."
    Arthur C. Clarke

  • Regarding creation of new Alert category

    Hi All
      When I am creating a new alert category using Tcode ALRTCATDEF and trying to save it .A prompt-message is displayed as “prompt for customizing request “  what should i do to create the new Alert category . and see it in the select Alert category box
    Regards,
    Aziz

    Hi Aneez,
    I have given u all the configuration steps with links also the different ways by which u can raise alert.
    I think u have not gone through my threads. Also u did not replied me whether u resolved the problem which is raised in thread.
    1) how can i send an email alert through RWB?
    RWB is used for raising Integration and Adapter engine related errors.
    Its depends upto u what kind of errors u want to send.
    2)what are the steps i need to configure using Tcode ALRTCATDEF.
    Already provided u in one of ur thread.
    3) is this possible using CCMS Alerts .
    U can use this is another way of raising errros.
    4)do i need SMTP to be configured to send an Email Alert ?
    GO to SU01 transaction and maintained email address where u need to send alert message. IN ALRTCATDEF u need to mentioned the use in the fixed receiver tab.
    Hope it clears to you.
    Thnx,
    Chirag

  • Have IMovie but not IDVD, so how do I export?

    Any help would be much appreciated. I have IMovieHD but my computer doesn't support IDVD. It's a hand me down and new to me. Have typically used just IMovie in the past and was able to export via a dv bridge to make VHS, that was on my old IMac. But now I am at a loss. I can't seem to get the same exporting options I had before. IMovieHD isn't recognizing my external DVD burner, and I can't get it to export to my VHS anymore. Any advice or suggestions?

    I do not have IDVD5. I tried to go to mac and start updating the IDVDs, but I don't think I have a superdrive and therefore, from what I understand, my computer isn't compatable with IDVD. Ig I can use IDVD5, where can I download/purchase it without having to get the rest of Ilife which I already own?
    My internal cd/dvd drive isn't working at all, hence why I got an external cd/dvd drive, that is a QUE!007. My DV Bridge is from Dazzle.
    Basically, I am making a film that has mostly photos, and some film images, that I was able to get from my TV through the bridge up onto imove, some audio, and transitions and effects. I was hoping that when it was all said in done, I could just hit a button, burn a dvd that I could view in any dvd player, but that doesn't seem to be the case. When I tried to reverse and go from my computer to the tv through the bridge, the image was barely there basically a blue screen with a blur behind it.
    So what do I do now to get this movie either onto a dvd or onto vhs? I feel like I have all the right working equipment but I just don't know how to make it all cooperate with each other...
    So greatly appreciate all this help.

  • Alert Watch: can not define a MB unit for network inbound

    I want to create a alert rule for the cloud service, this rule is defined as the network inbound is less than 100MB within one hour, what makes me confused is that I can not find a MB unit, only byte unit can be used. Can anyone help or repost this issue
    to azure team?

    Hi,
    It's very strange, when I edit the alert rule that build yesterday, it gives me the error as below, however, I edit it with a new value 10000, it works as normal, and I receive the alert email (content:   'Network in GreaterThan 10000 (Count) in the
    last 5 minutes' was activated for CloudService: ), please try to create a new alert rule, and give further information here.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to burn an iMovie to DVD without losing quality? I have iMovie 10.0.5 and imac 10.9.4 mountain lion. I do not have iDVD. After iMovie goes through the encoding process, quality is horrible. How can I fix this?

    How to burn an iMovie to DVD without losing quality?  I have iMovie 10.0.5 and iMac 10.9.4 mountain lion. I do not have iDVD. After iMovie goes through the encoding process, quality is horrible. How can I fix this problem? I have tried the apps BURN and DVD Creator for MAC. I need to finish this DVD asap and becoming more and more frustrated. Why would Apple give us iMovie and not provide us an app to burn it to a DVD and / or take away the iDVD?
    Alicia McGinnis

    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673
    To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

  • IMessage notification alert tones are not working on my iPad ios 8.  Is this a know bug?

    my iMessage settings are exactly the same on my iPad air as on my iPhone five, but the alert tones do not sound off when I get an iMessage. Is this a known bug with or without a fix? Is there a setting that is different on the iPad then on the iPhone that I am just overlooking?

    Hi AppleUser543210,
    If you are having issues with your iPad's notification alert sounds not functioning, you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    Force an app to close in iOS
    Next, I would try restarting and if needed resetting the iPad -
    Restart or reset your iPhone, iPad, or iPod touch
    If the issue is still present, you may want to restore the iPad as a new device -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

  • Create new alert category

    Hi there,
    I am trying to create a new alert category(alrtcatdef)
    I get the following error
    Entry CCMS ALERTS   does not exist in SALRTCATC (check entry)
    ANy hint?
    Sabbir

    Hi sabbir,
    1) Transaction RZ20 is used for creating monitors in CCMS, select Extras --> Activate maintenance functions.
    2)Go to monitor (set) --> create, you will get to the following screen:in transaction RZ20 select extras --> activate maintenance functions.
    3)Go to monitor (set)--> create, you will get to the screen:
    4)click <<< new monitor>>> and select create nodes (F5) button from the toolbox icon.
    5)select rule node and hit the continue button.
    6)in the next dialog select CCMS_DEFINE_R_SYSTEMS as the rule definition and hit the continue button.
    7)Now select <CURRENT> from the match code for the R3 system parameter value and hit the continue button.
    Note: pls remember that we are creating a rule Based monitor: we need to make sure NO object checked from the selectable MTE tree.
    8) The next step is to create the virtual node to group all the MTEs that we should select from the MTE classes shown in point a. TO do this ,
    click on CCMS_DEFINE_R3_SYSTEMS if it is not already selected and hit create nodes (F5) button from the toolbox. now select
    virtual node and hit the continue button.
    9)in the name field write something like: test rule based monitors and hit the continue button.
    10) now click under test rule based monitors to select them and then hit on create nodes (F5)
    choose Rule based and hit continue button.
    11) On the next screen select CCMS_GET_MTE_BY_CLASS as the rule name and the hit the hit the continue button.
    12)Now we need to add each MTE class from point a. to tje following screen on the MTE class
    paramater value. select all of them and hit continue button.
    13) the next step is to include all MTE classes already defined in point a. you will need to repeat these steps for each
    additional class you want to add to the monitor set.
    14) After all classes has been included into the monitoring set hit the save button from the toolbox.
    15) you will be prompted for a monitor name , write something meaningful.
    The new Monitor set should be display
    Find the links
    http://help.sap.com/saphelp_nw04/helpdata/en/d4/cc823bd26a5c42e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/f6/d60b374e4e7c64e10000009b38f839/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e8/e7f0fb1a2511d294d200a0c930df15/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/9e9031c28d47b6e10000000a11466f/frameset.ht
    regards
    srinivas

  • Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

    Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Showmount: new-host: RPC: Program not registered

    I always have problem shutting down my solaris system, anytime i issue the shutdown command i always get this error "showmount: new-host: RPC: Program not registered" and the system dows not shutdown instead reboots.
    bash-3.00$ su
    Password:
    # shutdown
    Shutdown started.    Wednesday, March  5, 2008 12:03:30 PM EST
    Broadcast Message from root (pts/3) on new-host Wed Mar  5 12:03:30...
    The system new-host will be shut down in 1 minute
    showmount: new-host: RPC: Program not registered
    Broadcast Message from root (pts/3) on new-host Wed Mar  5 12:04:00...
    The system new-host will be shut down in 30 seconds
    showmount: new-host: RPC: Program not registered
    Do you want to continue? (y or n):

    I think the shutdown command executes "showmount" as part of its execution process and if the nfs deamon is not running at that time, it produces this error. If you just execute "showmount", you'll see the same problem. Check this page:
    http://access1.sun.com/FAQSets/Solarisx86FAQs.html#14
    You should execute shutdown with some parameters:
    # shutdown -i0 -g0 -y
    -y : non-interactive shutdown
    -i0 : init state 0 (for shutdown)
    -g0 : grace period in seconds (0 for immediate, 60 by default)

Maybe you are looking for