Newsroom season standard mode no longer available?

Bought the season in SD. Halfway into it, it's no longer available. What's happening? Is anyone else in the same boat?

There may have beem a defect in the HD copie of the episodes and they were removed to be fixed. It happens sometimes. They will probably return in a few weeks.

Similar Messages

  • Interactive Layout mode no longer available in Photomerge Panorama in PSE for Mac - any workarounds?

    Hello,  after having purchased a download of Elements 12 for Mac, I found out that the Interactive Layout mode in Photomerge Panorama was no longer available (it was available in earlier versions, such as Elements 11). Is Adobe able to exchange my version 12 for version 11, or is there some other way I can gain access to Interactive Layout mode? I have found that the Auto layout mode often results in a message that it cannot align the images to create a panorama. Thank you.

    In photoshop cs6 give this a try:
    1. Go to File>Scripts>Load Files into Stack, browse and load the pictures for the pano with the Attempt to Align and Create Smart Object unchecked
    2. Increase the canvas size of the document with the Crop Tool holding down the Alt key and dragging
        one of the crop corners out until you think the canvas is big enough to arrange your documents for the pano.
    3. Align the layers manually in the document window with the Move Tool as good as you can.
       (you can lower the layer opacxity so you can see the alignment better, but don't forget to put all the layers back to 100% opacity)
    4. Select all the layers in the layers panel
        (Select>All Layers)
    5. Go to Edit>Auto-Blend Layers and use Blend Method>Panorama and Seamless Tones and Colors
    6. After the blending it's possible you might see some whats looks like seams, so press Shift+Alt+Ctrl+E to make a merged copy on a new layer and hopefully that'll
        get rid of the seams.
    I'll make another post with directions for putting the plugin into photoshop cs6, since you probably don't want to install pse 11 just to get a plugin when
    photoshop cs6 is so much more capable than elements, for panoramas anyway.

  • Why is Acrobat 8 Standard no longer available?

    Hello,
    In 2007 I purchased Acrobat 8 Standard for EUR 349,00. As a translator I use the programm often and I would just like to keep using it. I had to uninstall the programm and unfortunately I couldn't find the install-files on my computer. So the only thing I need now is a download link to the install files of Adobe 8 Standard.
    But in this forum I learned that Acrobat 8 Standard just isn't available anymore, fellow forum users are advised to just purchase a new version. A new version would cost me EUR 422,99! I find this answer extremely uncooperative. As a translator I'm used to product updates and I wouldn't mind paying a reasonable amount for an Adobe-update. But buy a completely new version, just because Adobe doesn't allow us to download an "extremely" old version? I was never warned that one day my purchase wouldn't be available anymore or that updating would be impossible.
    Please help me and all the others that have bought Acrobat 8 Standard once and aren't allowed to use it anymore!
    Thanks
    Margot

    Hi Margo ,
    I am extremely sorry that you are experiencing such an issue ,however this is true that Acrobat 8 standard is no longer available as it is quite an older version .
    Adobe stops selling its older products once the new version is in the market .As of now the latest version of Acrobat available is Acrobat DC .
    You have an option of subscribing for it rather than purchasing the software .You would be charged monthly and the amount is quite affordable as well .
    The other option is you could connect with any of the Adobe Reseller and check with them if they have any copies of older Acrobat version ,but we could not assure you whether your purpose would be solved or not .
    Adobe would not be of much help in this case .
    Regards
    Sukrit Dhingra

  • Datamodeler - Naming Standards - technical white paper no longer available?

    Hi,
    I am wondering, is this document no longer available?
    http://www.oracle.com/technology/products/database/datamodeler/pdf/DataModelerNamingStandards.pdf
    I a m trying to learn how to apply Naming standards in data modeler but i cannot retrieve this document.
    On the datamodeler homepage, on tab "Documentation"
    clicking "Naming Standards (Technical White paper - pdf)"
    keeps me redirecting into the tab "Overview"
    regards,
    E.
    As I look at the content description of this document(i found that content description somewhere on the www), i believe i would find it very helpfull
    Contents of this Oracle SQL Developer Data Modeler Naming Standardization reference guide
    Introduction ............ 1
    Overview . 2
    Defining Templates for Keys, Indexes and Constraints....... 3
    Applying the Templates to the Relational Model ............. 5
    Prefix Management ........... 6
    Setting Name Patterns for Elements..... 7
    Defining Word Classification Types .. 8
    Supporting Naming Patterns with SQL Developer Data Modeler ... 8
    Reviewing Separator Settings for Elements in a Logical Model ..... 9
    Reviewing Additional Settings for Elements in a Relational Model . 9
    Using a Glossary .. 10
    Defining Glossaries ......... 10
    Using the Glossary Editor 10
    Importing Glossaries........ 12
    Importing a CA Erwin Data Modeler Naming Standard Glossary . 13
    Using Abbreviations............. 13
    Using the Name Abbreviations Utility............. 14
    Name Translation . 16
    Setting Model Level Name Restrictions ............. 18
    Using Design Rules Validation Related to Naming Standards ......... 19
    Conclusion ........... 20
    Resources ............ 20

    it's temporary problem and document will be available soon.
    Meanwhile you can look at this thread Data Modeler: Naming
    Philip

  • Feature to disable touch screen when pen is detected is no longer available in windows 7

    In N-trig drivers  with windows vista there was an option where one could select the option to disable the touch input when pen in near the screen.  That feature is no longer available when I installed new n-trig drivers in win7.
    I use my tablet a lot to take notes. But with dual mode on it detects input where I rest my palm on the screen to write. Every time I have to go and disable touch input completely before I start writing and enable after I finish. 
    I there any way to enable auto mode with Windows 7 n-trig drivers?
    This question was solved.
    View Solution.

    Thanks for your reply.
    I talked about this with HP tech support and they don't know anything about it. I don't even know whether they are qualified enough to provide support. They were just blaming the problems on Microsoft and N-Trig. I knew the problem is with the drivers and I wanted them to let N-Trig know that people like us are waiting to the Auto feature. But instead of considering my complaint they hung up on me not once but twice.

  • Error msg,please help :) "The item you tried to buy is no longer available"

    Hi there, I am using a Macbook pro with Leopard with the newest version of iTunes. Many, many times when I have tried to purchase the newest episode of LOST, I click 'purchase' and type in my information and click 'yes', and for an instant it says 'purchasing' and shows the striped purchasing par across the top for only an instant, and then that disappears and an error message comes up, saying
    "The item you tried to buy is no longer available.
    The availability of the item changed while you were using the store.
    The same item may be available with a different price or elsewhere
    on the store."
    In past weeks, I have been eventually able to purchase the episode, after trying to purchase and receiving the same error literally hundreds of times. Why do I try hundreds of times? Because I want to see LOST! And I will have to face the wrath of my disappointed housemates if I fail to present the episode in time. But this is very, very, very, very frustrating! Please help, iTunes! Or anyone, any help will be greatly appreciated. But this glitch has been going on literally for weeks/months! I expected it to be ironed out and fixed completely by now, but it is not at all, it is just as bad as it was when I first noticed it shortly after the beginning of LOST season 4, a few months ago.
    Also, when I try to email iTunes, I am sure that I can email iTunes if I finally pick a subject that does not apply, but I do not want to do that.
    It is also very, very, very frustrating, whenever trying to email iTunes, to be forced into picking a subject from a very, very limited menu. Many questions, such as this question, do not fit at all into any of the choices presented, from which a person is forced to choose a subject, before being allowed to type an email to iTunes.
    I look forward to any help anyone can give regarding this error message, so that I will be able to purchase the new LOST episode from iTunes. Thanks for your help!

    I had the same issue this morning downloading a pre-order of Alanis, Flavors of Entanglement . I noticed that the only thing that had changed fro me was that I had some song credits for purchasing ticketmaster tickets over the past few weeks. When I went ahead and spent my remaining credits... it downloaded with no prompting or trouble. Maybe the credits issues hangs it up?

  • HT1338 I cannot empty my cache in safari as the tab is no longer available. How did it disappear?

    Safari is getting very slow and I find I cannot empty my cash from the safari tab as it is no longer available?  Is this now part of Lion?
    Thank you
    Sandra

    sasbear wrote:
    Is this now part of Lion?
    No, it's part of Safari 6's changes. Just like the clear history, which does more than that (check the help files), unibar URL/search window, trying to get one thing to do multiple tasks (Apple being like a lemming and following the browser crowd), loss of the appearance pref and inability to change standard and fixed fonts and their sizes, and the utterly useless resizable tab bar spanning the entire browser window. None of these changes are due to the OS, just the iOSification of Safari.

  • How can I sync my Outlook 2010 calendar with Gmail Calendar now that Google Sync is no longer available

    My iPhone 3 had been syncing fine with Outlook 2003 via Google Sync.  I recently had to reload my PC, wiped it and installed Outlook 2010 as part of the reload; when I tried to install Google Sync I learned it was no longer available for download after December 14th.....I did have it on another PC, moved it over but got an error message. So I am no longer able to make calendar changes on my iPhone and have them sync to Outlook or vise versa.  In addition my Google calendar is now empty....
    Anyone know of a way to enable a sync between Google Calendar and Outlook 2010
    Is there a way to add or import my Outlook Calendar to Google Calendar?
    Why is all this stuff so complecated!??

    no you can not do that. You can sync any web calendar that supports web dav to lightning, but Microsoft have chosen to not use the open standard and instead only offer a Microsoft Proprietary interface. Nothing new here though. They only offered a Microsoft Proprietary interface to download mail for many years. They call it innovation. I call it vendor lock in.
    Interestingly enough you can sync office 365 calendar via OWA but not outlook.com

  • ABAP Web Dynpro Application changes in Administation Mode no longer working

    Hi Gurus,
    To apply customizing to a standard SAP Web Dynpro application we used to simply run the application in administration mode. After we changed a parameter to allow for theme application this adminstration mode no longer works. Right-Click simply acts as if you are running the application normally. We have tried to remove our parameter but this had no effect.
    How can we "fix" this error without creating a new custom configuration which will cause the URL to change?
    Thanks,
    Garth

    Hi,
    how did  you  open in administrative mode?
    to open in adminstrative mode do as follows:
    In se80 ,i.e in the menu bar:
    Web Dynpro Application->Test->Test in Administation mode.
    i hope u can see the option "Settings for surrent config" .
    you can refer the thread.
    [Re: ABAP Web Dynpro Application changes in Administation mode]
    Priya.

  • Ipod Touch , Nike+ no longer available after neglect attitudes.

    Can find the Nike+App no more.
    After deferring the attitudes it was no longer available!
    Can somebody say to where I can get the Nike+ App?
    Thank in advance

    I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
    The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
    Message was edited by: IPatronius

  • Job output is no longer available in the database control file

    Im running my rman backup with Oracle Enterprise manager grid control 10.2.0.1.
    In nocatalog mode.
    When I look for the job output in the "View Backup Report" section, it says
    Job output is no longer available in the database control file.
    Here is my rman setup:
    RMAN> show all;
    using target database control file instead of recovery catalog
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 7;
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 2;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 5 G;
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/app/oracle/product/10.2.0/db_1/dbs/snapcf_mus_prod.f'; # default
    anyone knows why i cannot see my rman job output?

    show parameter control_file_record_keep_time;
    NAME TYPE VALUE
    control_file_record_keep_time integer 7
    The backup is usually the last one. And it's the day before.
    If i go to the JOB tab in oem, then click on the job detail, i can see the detail of my rman backup. But i cannot see the backup detail in the View Backup Report section off the database. It says the error message : Job output is no longer available in the database control file

  • Bonjour for windows: "The printer you have selected is no longer available"

    Whenever I go to try and set up sharing my imacs printer with wifes windows computer, the bonjour for windows app at first sees my two printers, but as I select them I then get a message stating that "the bonjour printer you have selected is no longer available. Please make sure the printer is powered on and plugged in." It of course is on, powered and plugged in, and receives print jobs from my mac. I have also configured printer sharing in OS X 10.6 to allow for "everyone" to print. Don't get any firewall messages either.
    Same problem happens for me when I am trying to connect from windows running under Parallels on my ibook.
    Has anyone run across this problem and can offer guidance? I'm running out of hair to pull out!
    Thanks in advance,
    "I'm a Mac, and I'm a PC... and we're trying to play nicely together." (mumble-mumble-grumble...)

    Problem solved!! Somehow. After being in try everything and anything mode (remove/add printer, update drivers (again), shut down/restart, etc), I think I solved the problem my changing sharing permissions. I still couldn't print though. Kept getting the "printer cannot be contacted over the network" error message. After much searching and reading things I didn't really understand, I noticed I kept running across this statement that Windows 7 does not play well with DHCP and the printer should be assigned a static IP address. I found this forum item that tells simply how to do that: http://discussions.apple.com/thread.jspa?threadID=1725525. The big thing was that it had me add the printer as a local printer where I had been trying to add it as a network printer. I never would have thought to do that. Then you put in the Airport address and that's it. It worked!
    This whole thing made it very clear why I moved from Windows to Mac. I should never have had to spend a whole day trying to get a network printer to print. Good luck to everyone having this issue.

  • Wireless connectivity no longer available after TWC adds digital phone service

    Hi All,
    My problem is that my wireless Internet connectivity is no longer available after Time Warner Cable added digital phone service to my existing TV and broadband Internet service.
    Prior to having the digital phone service added, my set up was a Motorola Surfboard cable modem connected to my Linksys WRT54G wireless router, with three computers (two Win XP desktops and one Win 7 laptop) wired to the Linksys router. I had wired Internet connectivity on all three computers. Importantly, I could also access the Internet wirelessly from the laptop instead of using a wire.
    AFTER having the digital phone service added, my set up is the same except that now an Arris Touchstone Telephony Gateway (TG862G) has replaced the Motorola Surfboard cable modem. I still have wired Internet connectivity on all three computers. However, now I cannot access the Internet wirelessly from the laptop. This is a real problem in that often others in the house need access to the wireless network as well.
    I should also mention that (from a wired connection) I cannot access the Linksys router any longer via 192.168.1.1. Now, the Linksys router seems to be "invisible," almost as though it were a pass-through device. I can access the Arris gateway at 192.168.0.1 (for what it's worth), but not the Linksys router.
    Also, not sure this is important, but some time ago (when my wireless was working) I had configured the Linksys router so that it wouldn't broadcast the SSID. Through the Win 7 "Network and Sharing Center" I have tried to "manually connect" to my (hidden) wireless network. The message indicates that my hidden network already exists, but I still can't connect to it.
    I've seen a few potential remedies involving power cycling the gateway and modem in certain sequences, setting the gateway's NAT mode to Bridged, etc., but nothing has worked so far. Time Warner Cable's only advice is for me to purchase (yet) another service so that the gateway can provide the wireless access, but I since my Linksys router worked before I'd rather stick with that method (and avoid yet another charge).
    I would be very grateful for any help you could provide for this problem.
    Thanks in advance.

    1. Don't hide your SSIDs
    http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssid-really-more-secure...
    2. I assume the Arris is also a wireless router. Use inSSIDer to find the best non-overlapping, non-interfering wireless channels. Change the wireless channels on both the WRT54G and Arris if necessary.
    http://www.metageek.net/products/inssider/

  • Gifted Content is no longer available for download from store?

    On Christmas in 2006, I gave my brother a season pass from iTunes for a canceled tv show called "Smith." It only cost $12.99 to get all 7 episodes (some of which never aired on tv) as well as a digital booklet containing the plot synopsis of each of the remaining 5 unfilmed episodes.
    At the time his computer was severely crippled due to age and an old installation of XP and lots of other factors. It was in no shape or form to download and watch videos from iTunes on. So recently he got his computer back in good working order with a fresh installation of the OS, and so last night we went to download the episodes of Smith. He had remembered a few months ago right after his computer was up to par, but didn't know where his download code for it was. So I logged in last night to my iTunes account and got everything he needed and we tried to download it... only to get an error message saying that that content is no longer available from the iTunes store!!
    I guess I can understand if they take content off the servers that isn't selling well, but shouldn't they be able to track whether or not a gifted purchase has been redeemed yet or not? I don't remember seeing anything about a download deadline when I purchased it for him. If it's not available at all anymore, shouldn't I be entitled to a refund of my $12.99?
    Just wondering if anyone else has experienced this before.
    Thanks.

    yensid4him wrote:
    Thanks. That worked. I submitted a note to the help dept. and they issued me a refund for $12.99. It still stinks that the content is no longer available.
    Yes, but that's the way agreements with the studios work
    Okay now I have another question related to this... is it possible for someone to resell (re-license?) content that they bought from the iTunes store? I mean, since this TV show will never be released on DVD, and not even all of the episodes aired on TV, could someone who was willing to "sell" (transfer) their license of it to me do so?
    Nope. You don't own the rights to distribute. Your purchase only entails you to posses the product. It does not grant you any resell rights or transfer rights. The studios do not allow this at all.
    I've always wondered that, because you can resell physical CDs and DVDs that you don't want anymore... is that possible with iTunes purchases? I imagine it would have something to do with authorizing computers...
    You cannot compare the two. With CD's and DVD's you own the physical media (you don't own the content itself, but they are inherently linked). That's not the case with digital content which are only licensed to do certain things with them. Again, its how the media companies want to do business.

  • I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

    I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?

    Ask the ACDSee Pro support personnel. 
    With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library.  I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
    OT

Maybe you are looking for