Next button in symbol, start animation from the timeline and after 3 sec playReverse

Hello,
I have a next button in a symbol. When I click on the button I would like to start the animation from the timeline.
It wil starts at one second. But if the timeline is after 3 seconds I would like to play the animation backwards (if you click on the same button).
I tried it with the code below but it starts always at 1 second.
var pos = sym.getPosition() //
if (pos <= '1000'){
sym.getComposition().getStage().play(1001);
else if (pos <= '3000'){
sym.getComposition().getStage().playReverse(2999);
Can anybody help me with the code?
Thanks!

Hello,
Thanks for the demo file, I checked it, tried it in my project and it works.
But I think I have to explain better.
I have a button in the symbol. When I am between 0 and 1 second on the stage timeline
and I click on the button. The stage timeline (slider) will start from 1 second till 2.
But when I'm in the timeline after 3 seconds (doesn't matter if its at 10 sec) and I click on the button,
I would like to play the stage timeline from 3 seconds till 2.
Is this possible and how do I do that?
Thanks

Similar Messages

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
(2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
Thanks
Sam

TidyCup
What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
or
with your mouse cursor draw a rectangle around the clips that you want to select
2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
Are you asking about photos with landscape or portrait orientation?
The pan and zoom tool does one photo at a time.
Have you read the Adobe documentation on the Pan and Zoom Tool?
http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
Please review and clarify and then we can get into greater details on this.
Thanks.
ATR

[Cp] Select object from the timeline and move it on slide with cursor keys ?

Hello,
I don't know if there's a shortcut for this :
Sometimes, it's easier to select an object from the timeline but if you try to use cursor keys to move it, you're in fact moving IN the timeline.
Is there a way to switch to Slide edition ?
Thanks.
PJ

You can not only use the cursor keys, but also in combination with other keys. And indeed, you have to move the cursor over the stage:
http://blog.lilybiri.com/shortcut-keys-part-1-moving-and-resizing-obje about shortcut keys for the stage
http://blog.lilybiri.com/tiny-timeline-tidbits about shortcut keys for the Timeline
There is a list with shortcut keys in the Help, but not complete.

When I start up FCPX, the timeline and the clips don't highlight in yellow. I have to double-click to get them to highlight and it's in white. What's this all about?

The system seems sluggish, as well. I can't find anything in help that describes what this is all about.

Are you using the Select tool when trying to click on clips? Might try hitting "A" on the keyboard just to be sure.
~D

Some songs starts on my iPod, then stop and start from the begining and play all the way through

Hey,
While listening to songs on my iPod Classic 120gb, some songs will start to play, after 2-3 seconds, stop and start again from the beginning and play through the entire song no problems. On iTunes the songs still plays fine no stopping or starting. All songs are random artists and songs.
Help! its really frustrating!

Hey andy8299,
Do you have any other music software (i.e Limewire) installed? If so perhaps these files are not compatible.
See this for compatible song formats:
http://docs.info.apple.com/article.html?artnum=61476
Hope this helps,
Generik

Playing an animation on the timeline within a symbol from another symbol

          Hi all
First post, good to be here
I have the following
STAGE
          SYMBOL_1
               DIV_PLAY
                    MOUSEUP(COMMAND)
               DIV_STOP
                    MOUSEUP (COMMAND)
          SYMBOL_2
               DIV_ANIMATION_1
                    ANIMATION_1_START (TIMELINE POSITION)
               DIV_ANIMATION_2
                    ANIMATION_2_START (TIMELINE POSITION)
I would like to do the following:
play "SYMBOL_2" - "DIV_ANIMATION_1" - "ANIMATION_1_START" from within "SYMBOL1" - "DIV_PLAY" with the mouseup command
I have tried doing this with the help of this post http://forums.adobe.com/thread/964882 but i cant crack it!!
I know that i can sym.getComposition().getStage().getSymbol("div_animation_1").play(); from within "div_play" but how do i access a point on the timeline and play from there...
many thanks!!

Answered my own question,
sym.getComposition().getStage().getSymbol("div_animation_1").play("animation1_start");

I bought a movie three days ago. It begins to download from the cloud, then my iPad goes to sleep and when I open it again, it starts downloading from the BEGINNING. How do I get the WHOLE MOVIE to download? I have re-booted but that didn't help.

I can't seem to figure out how to download a movie. It begins to download (and yes, I've checked my download speed and my bandwidth and both should, in theory, be adequate to download a movie!) but then the iPad will go to sleep and when I get back to it, it shows that I have bought the movie but nothing is downloaded. And when I try to download the next time, nothing is saved and it starts again from the beginning of the download.
I sat down by my iPad while I was working and every few minutes I would swipe to turn it on and it got over half of the movie downloaded. But then I had to go to leave and now it shows nothing is downloaded.
I can see having it take a few hours to download IF one was able to just start the download and walk away and come back later to watch the movie. But to have to repeatedly begin from the start of the download is incredibly frustrating. I would want my money refunded to my iTunes account at this point, if I was able to do that. It's just not worth the hassle.
Suggestions? How does one download a movie from iTunes? It should not have to be this hard!!

See if you can redownload it.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you can then delete from your iPod if you can and redownload.
If you can't delete from iPod, go to to iTunes>Store>Check for Available Downloads on your computer , amd dpwnload and sync

I have used firefox for 3 or 4 years, today it would not open. I had to reinstall and start over from the beginning. I lost a lot of bookmarks and preferences.

Adobe installed an update, which restarted my desktop pc. After restarting I was unable to open Firefox browser. So, I clicked on Firefox, and then run as... first I tried running as... and chose my name. Firefox browser still would not open. Then I chose administrator which opened Firefox browser, but, as a new Firefox installation. It did contain add-ons, but not book marks, history, downloads or preferences. Now i have started over from the beginning. Is there any way I can restore lost bookmarks and preferences? Do you think system restore would help?

Are there still JSON backups in the bookmarkbackups folder?
*http://kb.mozillazine.org/Lost_bookmarks
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work.

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work. I'm using a Windows Vista.

Hi there,
I've got a couple of articles that may help you out. This first one goes over how to properly remove and reinstall iTunes.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
This next one goes over some of the troubleshooting steps if you are having issues reinstalling iTunes.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Hope that helps,
Griff W.

Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up?

When I started my iMac today, it started beeping like an alarm horn. I shut it down, and held the startup button a little longer to get it to start. Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up? Am I screwed? HELP!!

What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
It will take noticeably longer than normal to start.

Why does my iPod app keep starting over from the beginning??

I have noticed lately that my iPod app seems to start over and play ALL songs on my phone from the beginning nearly every time I plug my phone into my car stereo.
I plug my phone into my car stereo and listen every day on my work commute. As such, it's very important that the music stay on the same position between the times when I'm in my car. For the most part it's been fine, even on 4.0.1, unless I rebooted the phone or did a spring board respring, or otherwise killed the iPod app from the multitask app list.
However this past week, it's been starting over from the beginning (I was playing songs from a playlist and it starts over from the beginning of ALL songs) nearly every single time I connect it to my car stereo. I have not been listening to the music between times in the car, nor have I even opened the iPod app or killed the process from the multitask bar.
This is absolutely maddening. No changes have been made to the phone in the past couple of months, other than a few App Store app updates here and there. This just started really being a problem in the past week. What could be causing this?
Message was edited by: PatrickGSR94

Dont have that problem but i have two tips:
1 Other ipod/iphone apps: they are often the problem, i had an alarm clock and that blocked the whole ipod app, so check if other apps dont use songs to wake up or anything else..
2 try to leave the ipod app trough the multitasking instead of pressing the home button?
Greets mathieu

When I play my Ipod shuffle 3rd gen there's a moment when I start hearing interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down.

My Ipod shuffle 3rd gen starts playing songs with some kind of interference until it stops playing, when I turn it off and on again it starts playing from the first song all over again, and once it sounded like the music was slowing down. First I thought it was the earphones, but I exchanged them for newer ones and so far its the same

You may want to do a Restore on the shuffle in iTunes. The Restore button is on the shuffle's Summary screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings. If it's a software or data corruption glitch, the Restore should fix it. After the Restore, reload or resync your songs, and try it again. As a test, you may want to initially select a small number of songs to put back on the shuffle.

Anyone having problems with art/animation/audio disappearing from the timeline after a save?

Hello,
I'm having problems with many files losing their assets from the timeline after a save and reopening the file in Mac OS X Snow Leopard. This is happens quite often now and there seems to be no pattern to it. For example, I will open an existing Flash animation complete with sound and artwork, make changes to the animation timing, test the SWF and everything looks good, then save. After reopening the exact same file, there will be audio that was on the timeline will be an empty frame. In addition, there is art work that was swapped out or updated to a character and the symbols becomes empty after reopening. I'm losing days and hours of work and I can't seem to find any answers or help to figure out what's going on.
Any insight would be appreciated!
thanks!

I now use CS5.5 but I've noticed it on every version since CS4.
I JUST ran the latest update to 11.5.1.349
I'll let you know if it continues but for now I'm planning to learn a new software. Finally have some time to focus on this and if it works out I may say so long to Flash. I'll give CS6 a try but if it's not SIGNIFICANTLY improved (Brush tool comparable to ToonBoom, No losing data, Better Playback, Ability to export HTML5), it's just not worth it anymore. I've been using Flash since version 1 and since Adobe took it over, I hate to say that anything other than actionscript has gone WAY downhill. Many new features but they don't actually work well, or crash at runtime if used beyond a tutorial's level intensity. What's the point of all that functionality if it looks like garbage and can't perform on a professional level? Even if you do take the extra time to work slowly or limited to make it look nice - it loses the data! or now without HTML5 your venues of use are sliced in half? Pointless. I don't want to trash all my Flash experience, but I'm done defending an inferior product and waiting for it to catch up to a modern professional standard. I think my Flash days may be over very soon unfortunately. I feel like the're more interested in defending what they've created, than in making it work or even asking us what we want. I feel like a Girlfriend who's Man keeps promising to get steady work but hasn't after 10 years. Flash...we need to talk.

How do you NOT start up from the install disk if it is in the CD drive?

This has to be a dumb question, but . . . I put my 10.4 install disk into the CD drive of the Mini to try an experiment, installing OS X on a thumb drive as a backup. It didn't work. Now the Mini will only start up from the install disk, not the internal drive (which has 10.5.8 on it).
The advice I have seen in the forum says to hold down the D key upon startup and that will choose the internal drive as the startup disk. That didn't work. Also, there was a suggestion to hold down the option key upon startup, and then choose the internal drive from the startup manager. No luck there, either. I also tried holding down the eject button on the keyboard during startup, but it still started up from the install disk.
I feel like I am in a 1 Infinite Loop here. Any advice much appreciated.
Jim

Oops, I will now answer my own dumb question. I found another suggestion in the Powerbook forum that said to hold down the mouse button as it boots up, and the disk should eject -- it worked! I hope this will help somebody else. Sorry about the previous post.

Can I use Power Query to Import a table from Excel sheet range which starts not from the top row?

Hi,
Being an experienced Excel user before Power BI, I am just starting to explore the M and Power Query capabilities, and need help already (ain't easy to google this use case somehow):
I need to import the table which sits in the Excel file with header row in the row 17 of Excel sheet, with some metadata header in the preceding rows of the columns A and B.
01: Report name, Quick Report
02: Report Date, 1/1/2014
17: Employee Name, Manager, etc...
18: John Doe, Matt Beaver, etc.
Both (a) direct attempt to load as Excel file and (b) the indirect way through [From Folder] and formula in custom column -- both lead to the same error: "[DataFormat.Error] External table is not in the expected format."
Specifically, I tried to use the [Power Query -> From File -> From Folder] functionality, select an Excel file and add a custom column to access the binary content: [Add Custom Column] with formula "=Excel.Workbook([Content])".
It looks like Power Query expects a rectangular range with headers full-width followed by a contiguous table range to import anything, and refuses to load if that is not the case...
QUESTION: Is there any way to load whatever-formatted data from Excel first, and then manipulate the overall imported range (like referring to rows starting from 17th using "Table.SelectRows" etc.) to read the actual data? Reading and using
the metadata from header would be a bonus, but that comes second... The main issue is to get something from a non-regular Excel file to later work with using M formulae ...
Thanks!
SAM

Finally found the answer to this one in ():
You Cannot Open a Password-Protected Workbook
If the Excel workbook is protected by a password, you
cannot open it for data access, even by supplying the correct password with
your connection settings, unless the workbook file is already open in the
Microsoft Excel application. If you try, you receive the following error
message:
Could not decrypt file.
ANSWER: So, will have either weave in the work with temporary unprotected files or requires opening them before updating the data source (although this almost defeats the purpose of automation...)
ANSWER to ORIGINAL QUESTION: password was preventing Power Query from reading the Excel file. For solution see above.
Thanks anyway for participation and inspiration, Imke!

Next button in symbol, start animation from the timeline and after 3 sec playReverse

Similar Messages

Maybe you are looking for