Nexus 5000 does not restart after nx-os to 5.2 upgrade

Hi, I'm new in the forum and I found it while doing some research about my issue.
Just upgrade Nexus 5596UP with n5000-uk9-kickstart.5.2 and install all command command. For my surprise it din'nt restart after 60 minutes and anly leds working belong to the power fans.
If you know a similar case or information that can provide me to recover the nexus will be great.
Thanks in advance.

It sounds so much similar to
https://tools.cisco.com/bugsearch/bug/CSCun66310/?reffering_site=dumpcr

Similar Messages

MAC Mini does not restart after Yosemite update

I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems. I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
Any help or ideas appreciated
Larry

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

MacBook does not restart after software upgrade without power adaptor

Hi everbody,
I've done a big mistake while updating my macbook without power adaptor plugged...
After having started the installation, I had many other things to do and completely forgot the installation. So I guess the macbook stopped when the battery had no more power.
The problem is that the macbook does not start any longer, with or without the power adaptor. I've tried the different ways to start the macbook described in the faq, but without success. When I plug the power adaptor, there's no signal and the battery remains very low.
So, if someone has a way to restart my macbook, I'd be greatly happy !
Thanks

I've solved my problem by disassembling and reassembling the power supply.

IMac G4 will not restart after OS X 10.4.6 upgrade

I have manually upgraded my iMac G4 with downloaded upgrades from 10.4.1 up to 10.4.6 PPC. Each upgrade I sucessfully restarted the computer. After the 10.4.6 upgrade the computer now comes up with the grey/blue screen with the apple image in the centre and the little circle of lines going around ... endlessly!!
Does anyone have any suggestions. I know the remaining memory space is low.

Hi there...
Well, you need to make free space on the computer's hard disk drive.
And it would help if you could get that large 10.4.11 Combo download
and then consider wiping everything off the computer so as to install
a fresh new complete system on a zeroed and reformatted hard disk
drive. An archive of all the stuff in your computer, to an external would
be a plus. A clone could be helpful, so as to contain all the stuff at once.
But you are a bit beyond that at this point... prevention is always best!
Between software updates, upgrades, installs; etc. it is good to restart
the computer (as it will prompt you to, and you often have little choice)
and also run 'repair disk permissions' from the System's Disk Utility.
Each time. Often, I restart a computer or start it up, and hold the Shift
key down in order to get it to SafeBoot. Then log in, and choose Disk
Utility in the Utilities folder, from GO in the Finder menu. Launch D.U.
and choose 'repair disk permissions' and after it runs, quit that & restart.
At this time, you may need to see if you can start up the computer from
the Mac OS X 10.4 installer disc and in the second Installer screen,
when a main Installer Menu bar appears, choose from the top bar to
get Utilities, and run Disk Utility from there. Run 'repair disk' until you
get a clean report; and then run 'repair disk permissions' too. Then
you can also see if SMART reports the status of the hard disk drive
as pass or satisfactory, or some bad message indicating failure.
Exit Disk Utility (in the booted 10.4 installer's disc) and choose from
the same menu in the header's menubar to select Startup Disk; use
this to try and see if the computer's system can run the computer.
At this point, I've also invoked SafeBoot and when the computer
finally restarts (after using utility from boot disc) and again use the
Disk Utility on the computer's system to 'repair disk permissions'
and then quit D.U. and restart again. You can remove the boot
installer disc any time possible, once you are done trying to repair
the hard disk drive and the basic permissions. A mouse-button held
on startup can force that Installer disc out.
Hopefully these ideas, out of sequence a little, aren't confusing.
Good luck & happy computing!

Task Sequence (LiteTouch.wsf) does not restart after first logon on Windows 8.1 deployment

Hi guys!
I can't figure out what cause the issue.
First, this is my setup :
ADK installed
MDT 2012 (upgraded from 2010 update 1)
Boot wim regenerated from scratch
LTIApply.wsf edited http://support.microsoft.com/kb/2797676/en-us
Windows 8.1 configured and captured (my first Win 8/8.1 deployment)
New task sequence for that wim.
My issue is :
The task sequence windows won't show up only with windows 8.1 deployment after the first logon. (I tried with a Windows 7 with the same setup, works flawlessly)
I can see the desktop, but nothing show up. I have all the folders and files on the c: (MININT, _SMSTaskSequence LTIBootstrap). I clicked twice on LTIBootstrap, did nothing. I did an LiteTouch.wsf /start, nothing.
I recaptured my Windows 8.1 (it was on a virtual machine) and I did a new TS. The issue still there.
All the SMSOSD logs files are on http://sdrv.ms/18VPSKy
Someone can help me on this? I'll be very happy!
thanks!

Was this ever resolved or does anyone have an idea how to fix it?
I am having a similar issue. I deploy a custom Windows 8.1 image to a system and I get through the OS install, but I end up at the user login screen without the task sequence resuming (thus not running any windows update, doesn't join domain, or any post-install
tasks). The built in administrator account also shows up as disabled.
The only changes I have made to the unattend.xml for that image are *maybe* to fix the IE 10/11 error that crashes the deployment by deleting the IE welcome tag, and I have no choice but to make that change when it happens.

Homogeneous System Copy of ABAP+JAVA Sy - sapinst does not restart after re

Hi everybody!
Someone can help me?
I am doing system copy CRM 2007 (NW 7) from DEV to Sandbox system. after database recovery sap is unable to make connection to database (DB is up and running). R3trans -d finished with 0012.
My question is how to change database schema after system copy. this might be the reason sap is not coming up.
Please advise.

Hi Andy,
Did you change the tnsnames.ora file to point to your new sid?
What does the trans.log output say?
(Just a curious question, but did you apply your sap license for the copied system)
Rocco

System copy using oracle backup/restore - sapinst does not restart after re

I am performing a system copy of a BW3.5 system, using the system copy procedures and Oracle backup/restore. on the target node, I have installed the CI. I have run sapinst to install the database up to the point when it tells me to install the Oracle Server software, then restore the backup, and choose 'OK' in the dialog box. As I did not want to leave this dialog open, I chose 'cancel'. I have now installed Oracle, and restored the database, but when I try restarting sapinst I get the following error, and sapinst quits:
FKD-00049 XML - Parser error: error: invalid symbol '' in literal 'SAPSYSTEM_DB
indind_ind_ind_ind_0_SAPSYSTEM_ind_ind_ind_ind_ind_0_SAPComponent_ind_ind_ind_
ind_ind_0_SAPComponent_Accounts_ind_ind_ind_ind_ind_0_SAPCompon' in line 1, 1
in file
ERROR      2007-08-20 15:06:13 [iaxxcsihlp.hpp:208]
           main()
FCO-00031 An error occurred during the installation of component Problem: error
in persistency subsystem.. Press the log view button to get extended error info
rmation or press OK to terminate the installation.
Has anybody ever experienced this before, or have any clues as to what the problem is? This is a production system, and it is supposed to be available by the end of the week....

Hi Angie,
You should always mention OS details while drafting message.
First, CHeck you must selected same SID as earlier while installation or Oracle and DB.
Secondly, you can skip this phase in SAPInst, bit technical for you.
Alternatively,
Recommendations
- Set parameters as per SAP Note 356370
- Change the swap mode from 'intermediate' to 'deferred' as described in
SAP Note 97179.
- Add /usr/sbin to the path of the user <sapsid>adm in the file
.cshrc, .login, .profile in the user's home directory. Enter the
following command(s) at the end of .cshrc, .login, .profile:
a) If using a csh, enter:
       set path=(/usr/sbin $path)
b) If using a sh, enter:
       path=/usr/sbin:$path
       export path
Br,
Amit Lal
Reward suitable pts.

Pavilion dv6 6169sl does not restart after installing video driver

Hi, I reinstalled windows 7 (64 bit) on my Pavilion dv6 6169sl.Then, I downloaded the video driver from the hp website and, when I restart the pc in order to complete the installation, it doesn't start, but the system stops showing the windows logo.Can you suggest me a possible solution to this problem? Thanks a lot.

, Hello and thanks for posting on the HP support site. The first thing you will want to do is boot into safe mode. Here is a link to help you with this. HP Notebook PCs - Entering Safe Mode (Windows 7) While in safe mode you will want to do a system restore back to before you tried updating the driver. HP PCs - Performing an HP system restore (Windows 7) Please let me know how this goes. Thanks again for posting and have a great day.

Firefox does not start after updates

Every time i get an update, download it and restart Firefox, it does not restart and i have to run the set file again. It means too that the updates have not been dowl=nloaded !
Windows 7 ultimate. 4Gb ram 1 Tb Regards

I AM ABSOLUTELY SICK-SICK-SICK OF THIS PROBLEM. I HAVE TRIED EVERYTHING BUT IT STILL DOES NOT RESTART AFTER UPDATES. I HAVE DELETED/CREATED NEW PROFILES, DONE CLEAN INSTALLS - NO CHANGE!!!
I HAVE CHECKED FOR VIRUSES - NOTHING. CLEAN. I AM ABOUT READY TO GIVE UP AND SEND A LETTER TO A LOCAL TECH/MEDIA PERSON SO THAT THEY CAN WRITE AN ARTICLE ABOUT THIS ISSUE THAT FOR SOME REASON MANY OTHERS HAVE AS WELL AND YOU=MOZILLA HAVE NOT OFERED ANYTHING CLOSE TO A SATISFACTORY RESPONSE, EXPLANATION, FIX, ETC ETC ETC

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Cisco Nexus 5596 does not boots up after NX-OS upgrade 5.1.3.N1.1 to 6.0.2.N2.5 [CSCun66310]

Hello Friends,
Just want to save your precious time & effort, while doing Nexus 5596 upgrades so wanted to share some useful info which you can have a look prior to your upgrades of Cisco Nexus 5596 device.
I recently ran into trouble when upgarding one of datacenter switch Nexus 5596 does not boots up and after investigation from Cisco TAC it comes out to be Bug documented below.
https://tools.cisco.com/bugsearch/bug/CSCun66310/?reffering_site=dumpcr
My Upgrade path of device was : 5.1(3)N1(1)  to 6.0(2)N2(5).
Since this upgarde involves upgrade of Bios and Power sequensor, I was having some doubts to get this succesfully upgraded, But there was more twist involved in this upgrade which I came to know after contacting Cisco TAC for my died Nexus 5596 device and got info that if you have below impacted version in your Nexus 5596 device and you are planning to do Upgrade, then you migh RUN into this serious BUG aftre which device won't come up at all and only Option left is to replace with RMA device.
PID                          Impacted                   Hardware versions      Updated Versions
UCS-FI-6296UP                                            1.0                                       1.1
N5K-C5596UP                                              1.0                                        1.1
N5K-C5596T                                                 1.1                                         1.2
You can check hardware version using below command from your device.
5596# show sprom sup | inc H/W
H/W Version     : 1.1
So please be carefull when planning your Nexus 5596 upgrade and verify above things as this Bug is not present anywhere in Upgrade docuemntations unfortunately.
Hope this will help and save someone's precious Time.

Today "upgraded" our switch (N5k-C5596UP) to from 5.1(2)N1 to 7.0(5) and after reboot no life from the switch either. Even no console response. show sprom sup | inc H/W shows 1:0.
Only thing we could do is RMA the switch. So what must I do with these switches? Have still to do 3 of them.

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Management Studio 2008 does not refresh after table create / alter

hello
Management Studio 2008 does not refresh after table create / alter, why?
f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
regards, jan

Hi jm,
I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

The webpage does not load after pressing enter or CTRL+ENTER. My OS is Windows 7 Ultimate

I have tried installing the older version Firefox 3.6. After entering the URL on address bar it does not load after pressing enter or CTRL+ENTER

This issue can be caused by an extension (AVG Safe Search can cause this) that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Nexus 5000 does not restart after nx-os to 5.2 upgrade

Similar Messages

Maybe you are looking for