NICDRV test04 fails saying  driver cannot receive ICMP reply from the peer

Hi,
I am running NICDRV tests and while running test04 check multicast support, I fail with the error:
driver xxx cannot receive ICMP reply from the peer.COuld anyone tell me why is this happening?
For full report:
stdout| STRATEGY:
stdout| - Add multicast route and join multicast group
stdout| - Receive ip_multicast traffic from the client side
stdout| with 1 multicast group.
stdout| - Send ip_multicast traffic to the client side
stdout| with 1 multicast group.
stdout| - Join multiple multicast groups, and receive multicast
stdout| traffic of multiple groups from the client.
stdout| - For WiFi drivers, ping 224.0.0.1 multicast address for
stdout| 10 seconds and verify the traffic using snoop.
stdout|
stdout| TESTABILITY: implicit
stdout|
stdout| 192.168.11.10 is alive
stdout| 192.168.11.11 is alive
stdout| ping -i xxx -s 224.0.0.1
stdout| snoop -d xxx -o /tmp/snoop-multicast.tmp
stdout| sleep 10 seconds to collect packet
stdout| verify if driver igb can send multicast packet to the peer
stdout| 1 0.00000 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 1)
stdout| 2 0.99996 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 2)
stdout| 3 1.00000 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 3)
stdout| 4 1.00002 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 4)
stdout| 5 0.99997 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 5)
stdout| 6 1.00002 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 6)
stdout| 7 0.99999 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 7)
stdout| 8 0.99998 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 8)
stdout| 9 1.00002 192.168.11.10 -> 224.0.0.1 ICMP Echo request (ID: 18511 Sequence number: 9)
stdout| verify if driver xxx can receive ICMP reply from the peer
stdout| driver xxx cannot receive ICMP reply from the peer
Test_Case_End| 18498 tests/functional/test04/runme | FAIL | 11:44:29 80659327923251 0 |
Thkx,
Ram

Well, I finally figured it out.  When trying to receive text messages from my iPhone pals, I would get a failure message and a suggestion to update my profile.  When I selected that option, the phone would sit for a long time trying to connect and then fail.  I went into my settings and was able to force an update.  Lo and behold, all of the backed up text messages started to down load.  It seems as though when I received the texts from my friends, the system was aware that I had not received then and they were held somewhere in the cloud.  Then they were continuously resent until I fixed the problem at my end.  They all downloaded over night and the problem has been resolved.

Similar Messages

  • I have signed in to my mail on my ipod but it keeps saying 'the connection to the server failed' and i cannot receive or send anything what should i do?

    i have signed in to my mail on my ipod but it keeps saying 'the connection to the server failed' and i cannot receive or send anything what should i do?

    Did it work on the iPod before?
    Can you access that mail account on other devices?
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I cannot earase my hard drive it says drive cannot unmounted?

    i cannot earase my hard drive it says drive cannot unmounted? how can i erase it ? please help

    Restart the Mac and start in Lion Recovery Mode by pressing Command-R before the startup chime.
    Select Disk Utility.
    Select the Macintosh HD volume
    Click erase, wait till it finishes destroying all your stuff.
    Weep cause your Mac won't boot no more.

  • I can't make a call but i can received calls and send text messages its say you cannot make a call check the phone settings!

    i can't make a call but i can received calls and send text messages its say you cannot make a call check the phone settings!

    It is not a cell phone.

  • I cannot download an app from the app store, it keeps loading until it says "You have already purchased this app so it will be downloaded no at  no additional charge", and then it prompt for password and I input it after which nothing happens.

    I cannot download an app from the app store, it keeps loading until it says "You have already purchased this app so it will be downloaded no at  no additional charge", and then it prompt for password and I input it after which nothing happens.
    I know my icloud has record of my installing this app before, but that was the first install that was failed during that time some other apps also keeps loading without respond whey they updated itself, and this app didn't install before I restart the device. But I don't see this app on my device after I restarted the device so it should have been installed on my device. It seems icloud has created some kind of dead loop that makes it not able to get the correct status about this app on my device.
    I have no problem install this app on my other device (iPad) with the same account, but just fail on my iPhone. And it just fine installing other apps...... What happened !!?? @@
    Please help !!! 

    Someone help! I dont know how to do this and please put the words into an easy way to understand because im young...

  • Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

    Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

    Perhaps this discussion will help with your issue,
    https://discussions.apple.com/message/16502324#16502324

  • Cannot received TV signal from my numerci decoder to my Qosmio F20

    Hello all, i've just bought a new notebook Qosmio F20, everything works fine except the tv tuner.
    I've tried to plugged a scart cable, a yellow-red-white cable and one antenna cable in my notebook and in my numeric decoder (Atlanta 5400) but i cannot received any signal.
    The best i can have is one second of sound of the first channel on each canal of windows media center.
    I'm working as an informatic technician but cannot find a solution to this problem, is there something special to do to received the television on my laptop?
    Hope to have news soon, thx to all in advance

    Hi
    If you want to watch TV on your Qosmio there are two ways. To use cable TV coaxial antenna or sat TV (sat receiver). Coaxial antenna must be connected to antenna in port at the back side.
    If you receive the channels on sat receiver you can watch it on your notebook to. In this case use composite in port. The channels must be changed on the receiver and the TV tuner will detect just one channel like on TV itself.
    Composite in port you can use to connect the VHS recorder on to notebook. On this way you can watch old cassettes on notebook display or even record them and burn to DVDs. I have tried it with Media Center Edition. It takes a long time but it works.
    Bye

  • I cannot down load Yosemite from the App Store. It keeps saying there is an error.  I have Mavericks installed now.  Can I download Yosemite anywhere else besides the App Store?

    I cannot down load Yosemite from the App Store. It keeps saying there is an error.  I have Mavericks installed now.  Can I download Yosemite anywhere else besides the App Store?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Problem with an application running Adobe Flex. Tech people say they cannot monitor, track or catch the problem.

    Problem with an application running Adobe Flex. tech people say they cannot monitor, track or catch the problem. Application shuts down and give the following erre:
    Failure of server APACHE bridge:
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.

    <moved from Downloading, Installing, Setting Up to Flex>

  • When i try to back up my iphone 4 it says i cannot back it up with the error code -50

    when i try to back up my iphone 4 it says i cannot back it up with the error code -50? HELP

    If you are running Windows and it stops on the first stage of a sync then my suggestion is to uninstall AppleDeviceSupport version 2.0.1 and re-install 1.5.2.
    There are instruction here to do it on Windows 7 (see the first post):
    https://discussions.apple.com/thread/3280228?tstart=0
    Those instructions are to fix a different problem, but it fixes the problem with syncing devices stopping on the first stage (backing up the device) too. The AppleDeviceSupport 2.0.1 comes with Quicktime 7.7 and, I believe, the latest Safari version.
    I'm running XP, so used the Everything search program (http://www.voidtools.com/download.php) to find the directories with the AppleDeviceSupport installers (they have the extension .msi and the version in the directory name) and right-mouse-buttoned them to do the uninstall and install. Note you need a reboot afterwards. (Actually I just sorted out the service in the Service Manager, but that's a longer explaination and a reboot works fine).
    Hope that helps,
    John

  • TS1398 I have an AT&T iPhone but only use wifi. Since I updated my phone to iOS 6.0 I cannot receive text messages from other iPhone users outside wifi range. What is the issue?

    I have an AT&amp;T iPhone but only use wifi. Since I updated my phone to iOS 6.0 I cannot receive text messages from other iPhone users outside wifi range. What is the issue?

    Check Settings>General>Cellular to be sure you have Cellular Data set to On.

  • I updated my Mac now I cannot get my mail from the "postage stamp" It keeps saying the mail will repair but it doesnt.

    I updated my Mac to Maver now i cannot retrive my mail from the "postagestamp" it tries to downlosd but Mail index has been damaged. Say it will repair itself next time I open  mai.l B ut does not. Help! 

    Any luck ?

  • I received an email from the "apple team" saying that my mac may have been exposed to spyware and wants my passwor, user id, etc.  Is this authentic?

    I received an email from the "apple team" saying that my mac may have been exposed to spyware and wants my passwor, user id, etc.  Is this authentic?

    I doubt that apple team sends this kind of emails. At the best, they may ask you to change your password, but not to reaquest to provide one.

  • I am only able to receive e-mails at home and cannot receive them away from home

    I am only able to receive e-mails at home and cannot receive them away from home.  Not being a technical person some "simple" suggestions would be appreciated.

    How many other places/networks have you tried? Maybe those places you tried are blocking the port/site.
    Have you tried contacting your email providers support site?

  • How do I remove or unregister my iphone. Changed to Samsung s4 and now cannot receive text messages from iphone users. Pls help

    How do I remove or unregister my iphone. Changed to Samsung s4 and now cannot receive text messages from iphone users. Pls help

    http://support.apple.com/kb/ts5185

Maybe you are looking for