Nike + crashes on my Ipod touch after about 1 hr 40 min run? HELP!
I am using my son's 2nd Generation (I know, I know, replace it already! But he has the 4th Gen Ipod touch, I kept his 2nd Gen) with Nike +. The software has been updated to the most recent version that this device can accept, and I have rebooted the device to the original config once already....
I have no issues at all with the app till about an 1:40 to 1:50 mins into the run. All of a sudden you can hear whatever song it is on, skips a few times then stops. If I hit the button on the front of the screen, it immediatly closes the Nike + app with no way to continue with my workout.
It does however keep the run data to the point of the music skipping and stopping as it saves it in my history....
Please help if you have encountered this and know how to fix it..
Thanks,
T
You can try the following. Also, maybe the next update willmake it better.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
The App store crashing is a known problem.
IOS 6 App store crash: Apple Support Communities
Similar Messages
-
HT1430 how to unlock my ipod touch after it is disabled
how can i unlock my ipod touch after it turn disabled can someone help me?
http://support.apple.com/kb/HT1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
ITunes not recognizing original IPod touch after new one installed
I tried to set up new IPod touch but itunes wouldn't recognize it. Downloaded latest version of itunes. Was able to set up new IPod touch but now old touch not being recognized by itunes. Went through the troubleshooting guide with no positive results. Old (unreconized) touch is fully charged. Restarted computer. Restarted itunes. Changes usb ports. Nothing working. Any ideas?
Hi Jim,
Thank you for your reply to my posting about iTunes not recognizing my iPod Touch after upgrading to Leopard.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Thanks for setting me straight on this.
iTunes Not Recognizing iPod Touch. Prior to your posting, I had already read the article you referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to your posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent you referenced was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch. -
Hey! I have had an Ipod touch for about 7 years and it has always worked! but for some reason i plugged it into my laptop and my computer is recognizing that it is plugged in but my itunes isnt what do I do?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
How do I sync my 3rd gen ipod touch after installing the latest version of itunes?
How do I sync my 3rd gen ipod touch after installing the latest version of itunes?
Correction: Thank you FoxFifth for the good information. I did find this information earlier before landing here in the support community. I have come to the end and I am uncertain about trying to reset my I-pod touch to the factory settings. I was satisfied with the older version of i-tunes. Can someone direct me how to downgrade i-tunes perhaps?
-
HT1454 why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
-
Mu Ipod touch is about 3.5 years old and just recently I have had trouble charging it it just says charging not suported thats with USB into a PC, on a docing station and in the car. I can get a bit of charge into it via the docking station before it displays the not suported message. Any idea?
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Tracking ipod touch after its been lost?
it doesnt look like it possible but can you track an ipod touch after its been lost with out have setting the find my ipod thing?
If you didn't set up Find My iPhone/iPod, then no, sorry.
I heard someone say that if you had the IMEI from the iPod, then the police could track it, but I don't know how easy that would be. -
there's no music in my device (ipod touch) after restoring content because of a software issue. music is available in my laptop's cloud though. how do i restore music in my device?
hi! an error message showed on my device last week and Apple support helped me restore the software on my device. Syncing went well and all my apps were available after. However, when I looked at my music in my device, it did not contain anything. The songs were in Itunes on my laptop and when I tried to play them they did not play. But, it says music is available for my account in the cloud. When I switched to the cloud, I was able to play my music already. But everytime I synced, the music from the cloud are not transferred to my device. Most of the music that I have are from other sources. How do I download those again to my device? I tried what I did before which was to copy the song from my laptop then edit paste it to iTunes but this did not work like before when automatically it becomes available on my device.
pls help. thanks! -
MY LAPTOP DIES NOT RECOGNIZE MY IPOD. AFTER ABOUT 20 MINUTES I GET A MESSAGE THAT SAYS MY IPOD HAS BEEN CORRUPTED AND NEEDS TO BE RESTORED. ALSO AFTER THE IPOD HAS BEEN CONNECTED TO THE COMPUTER THE IPOD WILL FREEZE. I AM ONLY ABLE TO USE IT AFTER THE BATTERY HAS RUN OUT. WHAT COULD BE CAUSING THESE PROBLEMS AND HOW DO I RESTORE MY IPOD!!!!!
Hey gwscrt,
Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
I would read the document in full, but here are the applicable steps for you:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Have a good one,
David -
Can not restore ipod touch. About 167MB of 346,8MB get loaded than download stops, a few minutes later: ERROR 3259! ( High Speed Internet Connection 16000kBits/sec)
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
ive had my 4G ipod touch for about 3 years and today i was waiting for a game to load and my ipod suddenly shut off and i cant get it to turn back on. is there any way to fix it or is it just completely shot?
See my response to your other post
-
Why is WWF crashing on my ipod touch
Why is my WWF crashing on my ipod touch?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I have just restored my ipod touch after being disabled. Now it is asking for the passcode? I still cant remember the passcode. How do I go past this?
You'll have connect in recovery mode and set it up "as new ipod" http://support.apple.com/kb/HT1808
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software.
If the issue continues after updating and restoring your device, refer to this document.
copied from http://support.apple.com/kb/HT1212
Maybe you are looking for
-
need help figuring this out.
-
Web application deployed to weblogic 7.0 does't work
Hi, I recently developed a web application. It runs perfectly in Jdeveloper Embeded server on my local machine. The app was talking to a orable 9i database. However after I deployed it to weblogic 7.0 server. All servlets don't work any more. Some gi
-
HELP Installing the Flex SDK?????Step #4
I am using windows vista (32) and I just downloaded and installed the newest jdk to program files. Now, I have no clue how to define java_home/bin directory in the system path. *Install the Flex SDK - Step #4 Can someone give me step by step details
-
BEX :Selection screen missing when executing a query
Hi all, When I am executing a query through BEX Analyzer,I am not getting the Selection Screen Popup.Instead ,the report is directly being generated.So,this is giving rise to various problems.But when the user is executing through portal,
-
Impact of invoice reversal to accounting
good day experts!! what impact does invoice cancellation/correction have on accounting department wen they hav already cleared the invoice? can the invoice repeatedly be paid to contractors becauase of invoice reversal? these is in terms wen trying t