No 4glte after updating at&t software

I have a Samsung Galaxy S4 and lost my 4GLTE after updating my at&t software. I have tried going into settings and opening up mobile networks to select 4glte, but it no longer gives that or any other option. It won't even allow me to select "default setting". It's as though everything got deleted when I did the update. How do I fix this?

Hey there
I’m sorry to hear that GPS functionality has been affected by a recent software update! I’d be happy to help! May I ask what appears to be happening when you use a GPS based app? Do you receive any error messages or does the location update at all? For troubleshooting purposes, I would recommend trying the Maps app with the device in Safe Mode. To enter Safe Mode:
With the device powered off, press and hold the Power button until the logo appears on screen, then release.
With the logo on screen, press and hold the Volume Down button.
Continue to hold the Volume Down button until Safe mode appears in the lower left of the screen then release.
Please check to see if the GPS functionality is working in Safe Mode. If so, we may have a corrupted file on our hands and should backup the device data in preparation for a factory reset.
I hope this helps!
Charise

Similar Messages

  • After updating with Nokia Software Updater my E66 ...

    After updating with Nokia Software Updater my E66 asks for Lock code. Please any body help me

    If you are only interested in maps.. download the installer from here ...Click on 'Download' under Instructions and then again 'Download' ..

  • I use reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine.  Now i have upgraded my osx to mavericks.  The reliance software gets installed but dosent open giving some er

    i used reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some error, Now i cannot use the internet !!! and itz the latest version of reliance software,,, plz help me !!!

    At last i did some experiments and it solved my problem... heres the solution :
    1. Install the reliance drivers and software from their website.
    2. As the reliance software is not supported my mavericks it wont open, but dont worry.
    3. Now after installation go to system preferences->network->and select  "ZTE Wireless Terminal".
    4. Configuration: Default
         Telephone number: #777
         Account name and password should be the owners number.
    5.Finish ! press apply and click Connect...
       Enjoy browsing !!!

  • Desktop Manager gone after updating to Desktop Software

    I am unable to find Desktop Manager after Updating to Desktop Software Version 6. Please How do I Install Apps using Desktop Software.
    Are Desktop Manager and Desktop Software the same??..  Help Please
    Thanks in advbance
    johngrant

    Hi and Welcome to the Forums!
    Please see this KB for hopefully useful information.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why did I lose all my Verizon ring tones after updating to new software?

    Why did. I lose all my Verizon ring tones after updating to new software?  Always worked before, now they are gone!  Contacted Verizon, who could not explain. 

    I was having a similar problem and here's what solved it for me: Under Settings>Notes the default account was changed from iCloud to another account for no apparent reason when I upgraded to iOS 7.  When I changed it back to iCloud, my notes started appearing on all devices again.  You might also want to check the Accounts setting under the Notes app to make sure All Notes is checked to retreive notes from all accounts.  Similarly, Settings>Mail,Contacts,Calendars has a default account that should match as well.  Good luck.
    -Brad

  • Missing photos after updating my apple software to iOS 7... Helppp

    So I lost a load of photos that I had stored on my iPad whilst travelling after updating the software. They then returned on my photo stream, and then before I had the chance to save them to my camera roll, they disappeared again... Surely they must still be somewhere if they returned originally? Does anyone know how to get them back? Some stayed but quite a few are gone! They're my memories from months abroad :(

    Welcome to the Apple Community.
    Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
    The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

  • Network conflicts after updating BB Desktop Software from v.5.0 to v5.0.1

    Hi,
    After updating the Blackberry Desktop Software from v5.0.0 to v5.0.1. Using the automatic updating tool, my computer starts loosing connection to the network every 1 hour. I'm using Windows XP.
    My company's technical assistance can only resolve the the problem by reinstalling the PC, but when I reinstall the software it happens again.
    Can anyone help me?
    Catarina

    Doing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.

  • How do i get my contacts back after updation of the software on iphone 4S

    when i updated my iphone software to ios 6.0 all my contacts got deleted....what do i do?

    Hi there!
    May I confirm whether you used iTunes (while the iphone was plugged into the computer) to perform the update, or if the update was performed "wirelessly" through the device's settings?
    Regardless, your solution should lie within your last backup (typically performed automatically when the phone is "sync'd" with itunes on the computer).
    For a quick how-to on restoring from a back up - please consider http://support.apple.com/kb/ht1766

  • After updating my ipad software, syncronisation with my pc gives troubles.

    After updating to OS 4.3.5 the synchronisation with my iPad and Pc, it gives errors.
    I've tried several things but nothing happened.
    Do somebody know a solution?
    Regards
    Clark

    thats too bad.  do you have a question you would like to ask

  • Hi,my apple tv show me only computers and settings only after update the new software

    Hi my apple tv show me only computers and settings only after update the new software

    Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

  • Problems After Updating Airport Extreme Software & Firmware

    Lost wireless connection to my printer while attempting printing from either desktop or laptop & when I tried to re-establish/update the wireless settings, I received message that new versions of software & firmware were available for my Airport Extreme. After I downloaded & installed both of these, I could no longer connect at all to the Airport Extreme. When I used the Airport Assistant to try to solve problems, it said airport was out of range. Also only got flashing amber light on Airport Extreme no matter how many times I tried to reset it and DSL modem (went through complete re-connect/re-install of both Airport Extreme and DSL modem hardware). I switched to an extra Airport Express I have and now everything is backing working again. Any known problems with either the latest Airport Extreme software (Airport Utility 5.3.2) or firmware (version 7.3.2 I think)?

    Firstly, on the Mac you use to configure the AEB, Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
    I see you are using 10.4.11, so the steps in Part B may be a little different (this is for 10.5.x).
    Use this procedure to setup your network again:
    A. Setup the 'Main' Base Station
    1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main) - leave off for at least 5 minutes to allow servers to reset.
    2. Check that ethernet cables are connected properly:
    - DSL Modem > AEB (main) WAN port;
    - AEB (main) ethernet port > Mac computer running OS X 10.5.x.
    3. Power-on DSL Modem and wait for it to initialise.
    4. Power-on the AEB (main) and start your Mac computer.
    5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
    6. Select 'I don't have a wireless network and I want to create one', click Continue.
    7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
    8. Select 'I connect to the Internet with a DSL or cable modem using DHCP'. Click 'Continue'.
    9. Click 'Update' and wait for the AEB (main) to restart.
    10. Disconnect the ethernet cable between your Mac and the AEB (main).
    B. Setup Client computer
    1. Open System Preferences/Network/AirPort.
    2. Against 'Network Name:' select your network (the name you gave it at A7).
    3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
    4. Click 'Apply' and exit System Preferences.

  • Sony Xperia Z experiences few usability issues after updating to latest software

    Recently I upgraded my Sony Xperia Z phone (see snapshot for current upgraded system info)
    After this upgarde I am facing few usability issues like ease of keyboard use
    I lost all saved words from disctionary, also punctuations symbols bar at top of keyboard is missing (see image)
    When I enter any wrong word and I want to delete/modify entered word.. now it deletes character by character instead of whole word (earlier behavior)
    What is the solution to get that top symbols bar in keyboard?
    itsvaibh

    Download sony update service,attempt a repair of software.Before that,backup your data.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Iphone 3GS fails to sync after update of new software

    I just updated my 3GS with the new software. It wont update my applications and says "could not be synced because the sync session failed to start". Someone please help me

    willias wrote:
    Mine was not jailbroken but is giving the same message when I updated it to iOS 6.1.2. Please help urgently, I really need this phone to be online as soon as yesterday
    Possible causes:
    1. Your antivirus is blocking access to gs.apple.com.
    2. Your phone is jailbroken.
    3. Your computer has been used at some time in the past to jaibreak some iOS device (not necessarily the phone with the problem), and its network database was corrupted by the hacking software that was used.
    4. Apple's activation servers are down (very rare, and never for more than an hour or so).
    For 1. try disabling your antivirus.
    For 2. & 3. you need to go somewhere other than an apple forum for help. Although you can try deleting lines containing gs.apple.com from your "hosts" file on your computer.

  • I get a -50 error on my iphone 4 when i restore after updating to the software

    I have just updated to the new software and when i am trying to restore back to how my iphone 4 was it keeps saying error -50. What do i need to do?

    Hi,
    This message is due an error of connection.
    Try to change the usb or use your origin cable.
    Also, you can desactivate your firewall if you are using windows7...
    Have a nice day.

  • ITunes can't read my Nano after updating to new software and iTunes

    Recently bought a nano and nike + ipod kit.
    When I inserted the nike receiver, I got an error message that said this ipod does not support the device (or something like that). I went to the help pages and proceeded to download the latest version of iTunes and the most up to date software. After that the computer restarted, except now when i connect my nano to my computer, iTunes does not recognize my nano (i.e. I don't see my nano on the left hand navigation bar) and the screen on my nano has the infamous "do not connect" error message. It's been like that for a while. I'm concerned I may lose data.
    Any help would be greatly appreciated.

    This is a common problem - try this thread for assistance:
    http://discussions.apple.com/thread.jspa?threadID=561013&tstart=75
    Ric

Maybe you are looking for