No Access to Message Box

Hello,
It seems their is something wrong with the access to the Message Box, I am unable to retrieve the messages. When trying to access the messages before a voice would say to enter your pass word now their is nothing looks like it is on a TILT.. three of our stations have the similar problem. The stations indicate a message on the handset yet when trying to access the messages nothing not even the command to enter your password.
And on the dispaly it show: on top it shows 1, To: 500 and at the bottom it displays: Ring out Callback, Endcall Acct
Frank NO Idea what wrong

hello Lini, when you check in firefox > help > about firefox, are you already on version 17.0.1?

Similar Messages

FIREFOX has stopped working is the message box ... cannot access

For the past week on attempting to open FIREFOX, i get an instant message box "FIREFOX has stopped working" this is followed by a second box "Windows is checking ..etc " and that is it, just cannot access F/FOX.
I am having exactly the same issue with THUNDERBIRD.
I am a "computer igno" and do not want to lose address books/contacts etc via an "uninstall/install".
have tried "start up repair" and 'restore using last known good configuration' without success.
any advice to resolve this issue, in simple layman terms, would be appreciated ... many thanks.

cor-el ... thank you for your response. i will need to work my way through the many possible fixes within those articles.
my concern is that my problem may not be a crash" or a "hang" given that i cannot access "FIREFOX" at all .. hence the message "firefox has stopped working".
thanks again .. tomorrow will hopefully be "fix" day after a week away.

Bug: Access Connections - SMS Message Box invalid received entries

SMS Message Box shows invalid entries in Received messages having 01/01/1 date. AC version 5.92, WWAN module F5521gw.

Hello Puppy,
Kindly update the ThinkVantage Access Connection to version 5.93
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Notification message box of Hyperion Planning when user login

Can we have a notification message box popup when user login Hyperion Planning or Workspace application? We would like to communicate to the end users by the system instead of just email because some end users may not check the email so frequently. It is the best to notify end users about any latest changes e.g. budget rate, etc when they login the system to check data or print reports.
We noticed that there is a broadcast message feature but only limit to those users already online. And the message will not shown when there are some users login later. We would like to have some notice board like message instead of instant messaging.
The online help of "broadcast message" feature:
"Use broadcast messaging to communicate a text message to all Planning users currently logged on to an application. For example, you can send messages about system availability or periodic maintenance. You should also send broadcast messages to request that users log out before upgrading or migrating applications.
You can send broadcast messages using the Web client or a command line utility. If you send them using the Web, they are sent to users of your current application. If you send them using the command line, you can specify any application, without being logged on to it. You can also schedule messages using standard operating system mechanisms. "
Thanks in advance!

I have tried the above step and it only works when i am in the advanced mode. but when i change to basic mode i can see the forms and still can access without any disturbance. for your help i am pasting the planningcentral.jsp so that you could suggest me something other.
Thanks in advance...
the original file :
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html>
<%@ include file="Common.jin" %>
<% nWhichPage = HspConstants.PLANNING_CENTRAL;
String redirectString = request.getParameter("Redirect");
String mainFrameContentURL = (String)session.getAttribute(HspConstants.SESSION_MAIN_FRAME_CONTENT);
String mainFrameContent = ((inAdvancedMode) && (mainFrameContentURL != null)) ? mainFrameContentURL : "SelectForm.jsp";
     String queryString = request.getQueryString();
     String mastHeadURL = "BT_Masthead.jsp" + ((queryString != null) ? "?" + queryString : "");
%>
<%@ include file="SessionValidate.jin" %>
<%-- Section for Checking latest CSS version and redirecting to AppSettings.jsp --%>
<%     if ((HspPlanning != null) && (HspPlanning.isApplicationOwner()))     {
          boolean isHubRegistered = (HspPlanning.getHubServer() != null);
          if ((!isHubRegistered) || (HspPlanning.isUserMigrationReqd())) {
               inAdvancedMode = true;
               redirectString = null;
               mainFrameContent = "AppSettings.jsp?RND=" + Math.random();
%>
<%-- End CSS validation section --%>
<html>
<head>
<title><%= HspMsgs.LABEL_WELCOME_TO_HP %></title>
<%@ include file="PlanningLibraries.jin" %>
<script language="JavaScript">
var isPlanningFramework = true;
     var topFrameLoaded = false;
     var taskListViewPaneLoaded = false;
     var processBarLoaded = false;
</script>
</head>
<frameset id="mainframeset" rows="72,19,*" cols="*" frameborder="NO" border="1" framespacing="0">
     <frame src="<%= mastHeadURL %>" name="topFrame" id="topFrame" scrolling="auto" noresize >
     <frame src="BT_ProcessBar.jsp" title="object palette header" id="objPaletteHeader" name="objPaletteHeader" scrolling="no">
     <frameset id="nestedFrameSet" cols="20%,*" frameborder="NO" border="0" framespacing="0">
<% if (inAdvancedMode) { %>
     <frame src="LP_ObjectPalette.jsp" id="leftPalette" name="leftPalette" scrolling="no">
     <frame src="<%= (redirectString != null) ? redirectString : mainFrameContent %>" id="mainFrame" name="mainFrame" scrolling="auto">
<% } else { %>
<%     int currentTLId = -1;
     HspTaskList thisTL = (HspTaskList)session.getAttribute(HspConstants.SESSION_TASK_LIST);
     if (thisTL != null) thisTL = HspPlanning.getTaskList(thisTL.getId());
     if (thisTL != null) {
          currentTLId = thisTL.getId();
     } else {
     Vector availableTaskLists = null;
     availableTaskLists = HspPlanning.getTaskLists();
     HspObjectPositionComparator hspObjectCompare = new HspObjectPositionComparator();
     HspCSM.sortVector(availableTaskLists, hspObjectCompare);
     if ((availableTaskLists != null) && (availableTaskLists.size() > 0))
          currentTLId = ((HspTaskList)availableTaskLists.firstElement()).getId();
     } %>
     <frame src="LP_ObjectPalette.jsp?TaskList=<%= currentTLId %>" id="leftPalette" name="leftPalette" scrolling="no">
     <frameset id="wizardFrameSet" name="wizardFrameSet" rows="*,0" frameborder="NO" border="0" framespacing="0">
<%     if (currentTLId != -1) {
          String wizardFrameContent = "TL_Navigator.jsp?TaskList=" + currentTLId;
          HspTask currentSessionTask = (HspTask)session.getAttribute(HspConstants.SESSION_TASK);
          if (currentSessionTask != null) {
               wizardFrameContent = "TL_Navigator.jsp?TaskList=" + currentTLId + "&SelectedTask=" + currentSessionTask.getId() + "&ShowWizard=true";
               mainFrameContent = "TL_Wait.jsp";
          } else {
               mainFrameContent = "TaskListStatus.jsp?TaskList=" + currentTLId;
          %>
          <frame src="<%= mainFrameContent %>" id="mainFrame" name="mainFrame" scrolling="auto" noresize>
          <frame src="<%= (redirectString != null) ? redirectString : wizardFrameContent %>" id="wizardFrame" name="wizardFrame" scrolling="NO" noresize>
<%      } else { %>
          <frame src="<%= (redirectString != null) ? redirectString : "Error.jsp" %>" id="mainFrame" name="mainFrame" scrolling="auto">
<%      } %>
<% } %>
     </frameset>
</frameset>
<noframes><body>
</body></noframes>
</html>

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps!

Access Denied message when running WU_TEST_106 form!!!

Hi all,
I am trying to use WebUtil components to use Oracle 9.0.3 Form to write from an Oracle Form to a MS Word document. To learn more about WebUtil, I downloaded a sample form named WU_TEST_106.fmb and compiled and have been trying to run it. When this form gets loaded, I click on the 'OLE' tab and then type a message in the 'Enter text to Transfer to Word' box and then pick a file named Sample.doc on my C:\ directory and then click on 'Write to Word' button. This causes the following 'access denied' message and the 'Sample.doc' file never gets updated.
We are using JInitiator 1.3.1.17, IE 6.0, Java 1.4.2_03 and Oracle 10g database.
Below is the contenet of the trace file:
Oracle JInitiator: Version 1.3.1.17
Using JRE version 1.3.1.17-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\seyedg
Proxy Configuration: no proxy
JAR cache enabled
Location: C:\Documents and Settings\seyedg\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading <SERVER NAME>/forms90/java/f90all_jinit.jar from JAR cache
Loading <SERVER NAME>/forms90/java/frmwebutil.jar from JAR cache
Loading <SERVER NAME>/forms90/java/jacob.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 9.0.4.0
Exception occurred during event dispatching:
java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.jacob)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkLink(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at com.jacob.com.Dispatch.<clinit>(Dispatch.java:537)
     at oracle.forms.webutil.ole.OleFunctions.create_obj(OleFunctions.java:398)
     at oracle.forms.webutil.ole.OleFunctions.getProperty(OleFunctions.java:189)
     at oracle.forms.handler.UICommon.onGet(Unknown Source)
     at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Thanks in advance for your help,
Seyed

Hi all,
Please disregard this posting. I resolved this issue by re-signing both the jacob.jar and frmwebutil.jar. See below:
Signed the Jacob.jar file once again on 06/02/2008;
C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\jav
a\jacob.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up c:\devsuitehome\forms90\java\jacob.jar as c:\devsuitehome\forms90\jav
a\jacob.jar.old...
1 file(s) copied.
Signing c:\devsuitehome\forms90\java\jacob.jar using key=webutil2...
...successfully done.
C:\DevSuiteHome\forms90\webutil\webutil>
I also re-signed frmwebutil.jar on 06/02/2008 at 9:55 AM:
C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\web
util\frmwebutil.jar
The given jar file c:\devsuitehome\forms90\webutil\frmwebutil.jar does not exist
C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\webutil\java\frmwebutil.jar
Generating a self signing certificate for key=webutil2...
keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
eady exists
There were warnings or errors while generating a self signing certificate. Pleas
e review them.
Backing up c:\devsuitehome\forms90\webutil\java\frmwebutil.jar as c:\devsuitehom
e\forms90\webutil\java\frmwebutil.jar.old...
1 file(s) copied.
Signing c:\devsuitehome\forms90\webutil\java\frmwebutil.jar using key=webutil2..
...successfully done.
I can now run the WU_TEST_106.fmb form and successfully write to a MS Word file.
Thanks for your attention:
Seyed

Access Denied message in Flash CS5 help

Hi,
I had the problem with an Access Denied message when running community help and followed the technote instructions to re-install, but still had errors.
Browsing the config files in my newly created folder for the chc app:
%appData%\chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1\Local Store\HelpCfg\en_US
I find that the "baseURL" setting in Flash_11.0.helpcfg was set to: baseUrl="http://help.stage.adobe.com/"
Which also shows the Access Denied error in the browser.
Changing this to baseUrl="http://help.adobe.com/" seems to start it working and I get packages downloading etc.
Not sure if the URL is right, but that helped me.

I am having the same issue, Mac OSX.
Can't find ANY of the files you have referred to, and I'm incredibly frustrated that once again Adobe has screwed up my day's work.
Why can't we just have the reference documentation instead of all this 'community' help.
There's a time an a place for that - and it's online. Why can't I just get the reference info I want for the app I am using by clicking on HELP?
And why does my CD-based install require access to your website to get help files?
Now I have to waste time finding and fixing another of your bugs because you're trying to make something overly complicated.
I understand why you do not give printed documentation with boxed product - but WHY can't we just have a PDF file?

How to keep OI window in background with message box/pop up boxes on top.

Hi
I have a new requirement to add in OI .How to keep OI main window fixed in the background with message pop ups atop OI window.
Even with message box pop ups , i should not have the access to OI main window.To make it more clear,when i change to some other application in my PC task bar (for eg:-MSWord) and then click back to OI main window ,i should see the message box on the top of OI main window . I should not have the access to click OI main window and OI message box as two separate operation in the task bar.
Please let me know where i need to make changes in my OI codeset.
Regards,
Nand

Hi Nand,
In the Message Popup step settings, check Make Modal under Layout >> Dialog Options.
I hope this helps.
Cheers,
David Goldberg
National Instruments
Software R&D

Crystal report i don't want message box authentification but automatically

Hello
Escuse me for my bad english
In businessobjects crystal report 11 when I use The Url
serveur/businessobjects/enterprise11/desktoplaunch/opendoc/openDocument.jsp?sDocName=Doc_Acquisition&apsuser=Myuser&apspassword=123
The first Time I have a messagebox authentification , user password and My document
crystal report is open .
The second time i have access directly to my document ( No message box)
I would like the first time i have access to my document directly (I don't want the
message box authentification).
It's possible ?
The script are on crystal reports opendocument.jsp documentxml.jsp
yourserveur/businessobjects/enterprise11/desktoplaunch/opendoc/)
have you an example ?
I dont want display logon.do the first time
have you an solution
Can you send me an example with a script that access directly to my document
Good luck
Thank you very much

Thanks Aasavari
Do you speak French ?
Thanks for example view_report --> it's Ok
I have changed the programmation to have access directly
what do you think,
When i have changed the file jsp to have access directly ( no message box logon)
the old version jsp display ?
why ?     stop the services tomcat ? or stop the service crystal cache server ?
I look forward to be hearing from you
sincerely
Michel
logonform.jsp
<%!
/**************************** class LogonForm ***************************
This logon form is used to gather the logon information needed
to login to Enterprise
private class LogonForm {
     HttpServletResponse response;
     HttpServletRequest request;
     int num_reports_needed = 1;
     String[] reportname;
     public static final int NONE = 0;
     public static final int REPORT_NAME = 1;
     public static final int REPORT_NAME_X2 = 2;
Constructor - Save the response and request objects
     LogonForm(HttpServletResponse response, HttpServletRequest request)
          //this.response = response;
          //this.request = request;
Constructor with options - Add some optional boxes to request other
                           input from the user such as reportnames.
     LogonForm(HttpServletResponse response, HttpServletRequest request, int extra_requests) {
          this.response = response;
          this.request = request;
          switch (extra_requests) {
               case NONE:
                    break;
               case REPORT_NAME:
                    num_reports_needed = 1;
                    reportname = new String[1];
                    break;
               case REPORT_NAME_X2:
                    num_reports_needed = 2;
                    reportname = new String[2];
                    break;
If we do not already have the logon information, print a logon form.
Return true if a logon form was printed, false if it wasn't.
     public boolean display_if_needed() throws java.io.IOException {
                    reportname[0] = "TEST1";   // my report
               return false;
%>
view_report.jsp
<%
Applies to Versions:     XI
Creation Date:     Febuary 28 2005
Description:
                         This sample to demonstrates how to view a Crystal Report on demand in
    *                         the zero-client DHTML viewer.
Author:               CW.
%>
<%@ page import = "com.crystaldecisions.sdk.occa.infostore.*,
                   com.crystaldecisions.sdk.plugin.desktop.common.*,
                   com.crystaldecisions.sdk.framework.*,
                   com.crystaldecisions.sdk.occa.security.*,
                   com.crystaldecisions.sdk.exception.SDKException,
                   com.crystaldecisions.sdk.occa.managedreports.IReportSourceFactory,
                   java.util.Locale,
                   com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"
%>
<%@ include file = "logonform.jsp" %>
<%
     try {
         //If logon information is required, display the logonForm and exit.
          //Create a special logon form that requests 2 Report Names
          //(code for LogonForm class is included).
          LogonForm logonform = new LogonForm(response, request, LogonForm.REPORT_NAME);
          if (logonform.display_if_needed()) return;
          //Log in.
// access directly
          IEnterpriseSession enterpriseSession = CrystalEnterprise.getSessionMgr().logon("Administrator","", "pa", "secEnterprise");
         //Grab the InfoStore from the httpsession
         IInfoStore infoStore = (IInfoStore)enterpriseSession.getService("", "InfoStore");
         //Query for the report object in the CMS. See the Developer Reference guide for more information the query language.
         IInfoObjects oInfoObjects = (IInfoObjects)infoStore.query("SELECT TOP 1 * " +
                                                                                 "FROM CI_INFOOBJECTS " +
                                                                            "WHERE SI_PROGID = 'CrystalEnterprise.Report' AND SI_INSTANCE=0 AND SI_NAME='" + logonform.reportname[0] + "'" );
         if (oInfoObjects.size() > 0) {
              //Retrieve the latest instance of the report
              IInfoObject oInfoObject = (IInfoObject) oInfoObjects.get(0);
              //Use the PS report factory to obtain a report source that will be processed on the Page Server.
              IReportSourceFactory factoryPS = (IReportSourceFactory)enterpriseSession.getService("PSReportFactory");
              Object reportSource = factoryPS.openReportSource((oInfoObject), Locale.ENGLISH);
              session.setAttribute("reportSource", reportSource);
              //View the report in the standard DHTML viewer.
              response.sendRedirect("CrystalReportViewer.jsp");
         else {
              out.println("Report " + logonform.reportname[0] + " not found.");
    catch(SDKException sdkEx) {
          out.println(sdkEx);
%>

Can I remove the annoying message box thingy beneath the search bar on FF 8

Can I remove the annoying message box thingy beneath the search bar on FF 8

You can hide the box that shows the snippets with code in userChrome.css
Add code to userChrome.css below the @namespace line.
* http://kb.mozillazine.org/userChrome.css
* http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus extension to have easier access to the customization files.
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html <br />
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
/* hide snippet container on the about:home page */
#snippetContainer { display: none !important; }
</nowiki></pre>

How can I detect whether a TestStand Message box is active from a LabVIEW VI or application?

I'm trying to detect when TestStand Message boxes are active on a local PC from a LabVIEW VI. Does anyone know a way to do this (ActiveX or some kind of "in memory" query maybe)?

Hello John,
the critical thing to do would be to get an engine reference to the Engine by means of a LabVIEW Automation Open VI (look in your activeX functions palette and the help for this item), the input will be an ActiveX reference to the TestStand Engine (browse for the class NI TestStand API, any version will do, and choose Engine from the list). Once you have this reference to the currently running TestStand, the next challenge is to some how access information about the current execution. The only way to reach that object is via getting the UIMessage object and then retrieving a Thread object from the message, and a SequenceContext from the thread... until finally you can access the property "Step". Your best reference in this case is
going to be the TestStand Programmer Help (specifically for the API) and explore the properties and methods of each of these classes in turn.
Feel free to ask if you get stuck.
--Regards,
Elaine R.
National Instruments
http://www.ni.com/support

Message Box Output

Hello to all,
I am failrly new to TestStand and have a question
Prior to begining the Test Sequence, I am prompting the operator with a Message box to select the part number that they will be using to test. How can I output this information out of the message box so that It can retrieve the correct file that I will be calling and also display that number on the Base Name of the Report, (where report options is located)?

Hi FredTest,
So are you not using the default serial number box that is prompted by the PreUUT callback? Or did you override the PreUUT callback and create your own serial number popup? Perhaps you have an additional message popup besides the default one?
If you are using the PreUUT callback, you notice in the Parameters tab you have the UUT container with a SerialNumber variable. This variable gets set when you enter something in our serial number dialog box. This UUT container is a parameter that gets passed by the Test UUTs sequence. Because of this, in the Test UUTs sequence, you will have access to this variable (In the Test UUTs sequence, look under the Locals tab and then expand the UUT container). Several of the callback functions fired off by Test UUTs are sent this container so you can use the information in there such as the serial number.
So, for example, if you override the TestReport callback (Edit >> Sequence File Callbacks; This callback allows you to change or replace report generation), you notice again in the Parameter tab, you have access to the SerialNumber variable under the UUT container.
If you are not using the PreUUT callback, let me know and we can discuss an alternative route.
(P.S. When using the Message Popup step, the data you type in is stored in the Step.Result.Response variable)
Also, this example, Including results of the PreUUT and PostUUT callBacks in the report may or may not help out. Also check out Obtaining UUT Information from within a Client Sequence
File.
Hope this helps!
Best Regards,
Jonathan N.
National Instruments

TS4002 I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password I want a solution to the problem, because in this way I

I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password
I want a solution to the problem, because in this way I will not benefit from the iPad

There is no solution. You have to provide the ID and password. There is no way around it. If the person you bought it from can't provide it, return it and get your money back.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Missing Message Box after Skin Copy in IC Agent

Hi,
I copied the default skin in a customer z-skin (and added a logo).
Everything works fine, even the company logo is visible.
Now I have the problem that for the role "IC Agent" all the three message boxes have disappeared and that behind the SAP logo, the "Interaction Center" is smaller then before.
Is this a problem in the process of the copy? Or is the mistake somewhere else?
Thanks for your help
Tim

Hi Tim,
We are facing exactly the same issue with our skin. we tried to copy 'NOVA' into a new custom skin and the three message boxes have disappeared.
Also we get a warning on UI when we use this new custom skin saying "Communication management software system is not configured".
Please can you extend help on this one. This is important for us.
Many Thanks
Priyanka

No Access to Message Box

Similar Messages

Maybe you are looking for