No "Admin Roles" or "Capabilities" on the Create User - Security tab
I have created some Admin roles with full Capabilities for an Organisation (other than Top).
However, when I login as "Configurator", and attempt to create a user under the "Accounts" tab, I cannot see any of the "Admin Roles" created under the "Security" tab. In fact, the "Admin Roles" or "Capabilities" list boxes somehow disappear altogether.
Does anyone know what can cause the "Admin Roles" and "Capabililties" list boxes to disappear from this tab?
Are you using IDM version 7.0 and above? If so, it is a security feature introduced by Sun.
An administrator can assign an admin-role to a user only when he/she is designated to be the "assigner" of that role. Here's how you do it:
Go to Security -> Admin Roles tab in the admin console, and click on the role to be assigned
In the form that opens up, click "Add from Search" in the general tab and search/add the desired account.
You would expect configurator to be a default assigner to any admin-role, but even this account needs to be configured to be the assigner for each admin-role.
Hope this helps.
-Adi
[www.xpressutils.com|http://www.xpressutils.com]
Similar Messages
-
Hi,
I am getting some problems with the Lotus Notes Connector. The resource is provisioned but the Create User task is rejected. In the Lotus Notes server log, there is no problem and the account was created successfully.
Below is the response OIM has set to the task:
Respuesta: ERROR_UNID_SET
Descripción de Respuesta: User created successfully. Error while updating user unique attribute in the process form.
Notas:
As you can see below, there was no error when the adapter was executed:
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisionsetPropertyEntered method
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAttributeMapping: START
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision: :loadAttributeMapping : Attribute Mapping file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/attributemapping_prov.properties
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedPropertiesEntered method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisiongetParsedProperties---- END
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CreateMailDb true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ShortName
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SecurityType 1
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailSystem 0
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Storeaddbook true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : SynchInternetPwd true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : InternetAddress
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : CertifierIDFile C:\Lotus\Domino\Data\cert.id
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Registrationlog
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailOwnerAccess 0
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MinPwdlen 8
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Addbook true
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : RegistrationServer win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit during create -- oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : OrgUnit oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaWarning 40
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Received null values for ExpirationDate:
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getDefaultDate : Setting Default date
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdType 173
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailTemplateName
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailQuotaLimit 50
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : LastName : Gerente
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : IdFilePath : C:\Lotus\Domino\id
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailServer : win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : FirstName : Teste
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Comment :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MiddleName :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Location :
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : MailDBPath : mail\
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : ForwardDomain : oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsEntered method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvisioncheckUserExistsExiting method
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Org Unit: oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::getUserName: Final UserName --- CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Name: CN=Teste Gerente/OU=oimdev/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : Full Name: CN=Teste Gerente/O=oimdev
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::createUser : User Created Successfully
INFO [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : Invoking trigger AdminP
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : MailServer : win2k3base/oimdev
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::loadAdminpProperties : AdminP properties file : C:\oracle\oim9101\xellerate/XLIntegrations/LotusNotes/config/adminP.properties
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' ADAPTER.LOTUSNOTES - LotusNotesProvision::triggerAdminP : AdminPCommand : tell adminp process all
I've retried the Create User task and got the Lotus Console messages below. There is no error:
10/20/2009 02:02:56 AM Admin Process: Checking for all requests to perform
10/20/2009 02:03:30 AM DIIOP Server: 192.168.200.6 connected
10/20/2009 02:03:36 AM Opened session for win2k3base/oimdev (Release 6.5.6)
10/20/2009 02:03:36 AM Closed session for win2k3base/oimdev Databases accessed: 2 Documents read: 0 Documents written: 0
10/20/2009 02:03:37 AM Certifying Teste Gerente/oimdev
10/20/2009 02:03:48 AM Opened session for win2k3base/oimdev (Release 6.5.6)
tell adminp process all >C:\DOCUME~1\ADMINI~1.WIN\LOCALS~1\Temp\rem22706.con
10/20/2009 02:03:49 AM Admin Process: Checking for all requests to perform
10/20/2009 02:03:49 AM Remote console command issued by win2k3base/oimdev: tell adminp process all
10/20/2009 02:03:49 AM Closed session for win2k3base/oimdev Databases accessed: 0 Documents read: 0 Documents written: 0
10/20/2009 02:03:49 AM DIIOP Server: 192.168.200.6 disconnected
Any suggestion?
Edited by: Renato.Guimaraes on 19/10/2009 21:04Sunny,
I figured out the problem... Wrong configurations. See what I did:
a) Reviewed the explanation below about the paramater certifierOU of Lotus Notes ITRes, so I set it to empty.
certifierOU Specifies the OU of the certifier to be used when creating user accounts If you use a certifier on the target system, then you must specify the certifier OU value. If
you do not have a certifier on the target system, then leave this parameter field empty.
If there are multiple certifiers on the target system, then you must create one IT resource (of the Lotus Notes IT resource type) for each certifier. Refer to Oracle Identity Manager
Design Console Guide for information about creating IT resources. If you specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is ignored during the creation of a DN for a new user account.
If you do not specify a value for the certifierOU parameter, then the user OU value that you specify on the process form is used in the DN. This feature ensures that only one OU value
is included in the DN.
If you specify a value for the certifierOU IT resource parameter, then user records for which the certifier OU value in the DN does not match the certifierOU parameter value are not
reconciled. This is because the user DN is used to match records in the target system and Oracle Identity Manager, and a difference in the certifier OU value would lead to a
mismatch in DN values. The following example illustrates this type of scenario:
Suppose a user account on Lotus Notes has the following DN:
CN=John Doe/OU=testcertou/O=test/C=US
If testcertou has not been assigned as the value of the certifierOU parameter for any of the IT resources created on this Oracle Identity Manager installation, then the records of this
user cannot be reconciled into Oracle Identity Manager.
Sample value: NY
b) The MailServer paramater was win2k3base/oimdev and I've changed it to CN=win2k3base/O=oimdev.
c) As the certifierOU is clear now, so I have to inform the Orgnation Unit field in the process form.
Thanks.
Edited by: Renato.Guimaraes on 24/10/2009 23:19
Edited by: Renato.Guimaraes on 24/10/2009 23:27 -
I'm getting an error on a line in the middle of a larger sql script, only in SQL Azure.
IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'foouser')
CREATE USER [foouser] FOR LOGIN [foouser] WITH DEFAULT_SCHEMA=[dbo]
GO
Error: "The CREATE USER statement must be the only statement in the batch."
I don't actually understand what 'the only statement in the batch' means.
What is a batch? Is it a SQL file? Is it related to a 'GO' statement or an 'IF' statement? What is the reason for the error? And how do I avoid it?
Thanks,
Tim>IF...ELSE imposes conditions on the execution of a Transact-SQL statement
I understand the general purpose of an If statement. I could let go of our definition of statement counting disagreeing too except that because of the error I'm stuck.
It's less important for Create User but what I am really puzzled over now is a very similar issue how am I supposed to do a safe version of CREATE LOGIN, when I don't know whether a login has been previously created on the server or whether I
am setting up the database on a clean server?
IF NOT EXISTS (SELECT * FROM sys.server_principals WHERE name = N'foouser')
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
If I try and execute this script, it throws the same error as above.
The first unworkable workaround idea is to omit the if statement
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
But if the login already exists on the server (because a similar script was already run), then the script throws an error.
The second unworkable workaround idea is to do
DROP LOGIN [foouser]
GO
CREATE LOGIN [foouser] WITH PASSWORD = 'asdfasdf'
GO
Obviously this throws an error in the second block if the login doesn't already exist on the server.
The third workaround idea I have is to go conditional by putting an IF condition around DROP instead of CREATE:
Unfortunately that doesn't work for me either!
"The DROP LOGIN statement must be the only statement in the batch"
(This is despite the fact that 'drop login' is listed on the
supported commands page, not the partially supported page..?! Which disagrees with the notes on
this page.)
Anyway the real question I am interesting in addressing is: is there actually a way to have a 'Create/Delete login
if exists' operation which is SQL-Azure compatible and doesn't throw me error messages (which messes with the sql execution tool I am using)?
If there is no way, I would like to believe it's because it would be a bad idea to do this. But in that case why is it a bad idea?
Tim -
Problems with the "Create a PDF" tab
I have a customer who is trying to create a pdf from Word using the "create a pdf" tab. The PDF is created but only the colored boxes behind his text show up. He is running Win7, Word 2010 and Acrobat Pro XI (with the latest update). The same thing happens if he uses the "print to pdf" option. The Word "Save as pdf" works fine.
Word Document (image below)
PDF (image below)It appears to be some sort of incorrect layering issue. You can fix the problem by selecting the Edit Text & Images command in Acrobat XI and right clicking on the boxes and selecting the Arrange command.
I've seen this issue occur with older .doc files opened in newer versions of Word. One thing you might try is to save out the word file to another format like RTF (make a backup first) and then resave a .docx before creating the PDF. -
How to create a duplicate of the Manager ID field in the Create user menu
Hi,
I´m trying to create a duplicate of the Manager ID field in the Create user menu (with a different label). I need to add it a field with the same funtionality of the Manager ID field (search users with filters) but I don´t know how.
I try to made a new adapter using the Thor.API.Operations.tcUserOperationsIntf but it don´t let me to map the input parameters.
Also I try to assing an existent Lookup to a new UDF, but I couldn´t find the correct one.
Did anybody do that??
Thanks!Hi Kevin,
First I created a a user defined field called USR_UDF_CONDUCTOR (Lookupfield type).
Then I added the following lines to de FormMetaData.xml file:
</Attribute name="-750" label="global.label.conductor" displayComponentType="LookupField" variantType="long" dataLength="50" map="USR_UDF_CONDUCTOR">
<ValidValues lookupMethod="findUsersFiltered" operationClass="Thor.API.Operations.tcUserOperationsIntf" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
<AttributeReference editable="true" optional="true">-750</AttributeReference>
When I try yo Create a new user, the OIM System Administrator returns a System Error. -
i really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying
If your rescue email is not working and you cannot remember even one answer, then you only have one option - call Apple.
http://support.apple.com/kb/HT5665 -
Where is the passwords and security tab?
I need to change my security quesitons because i forgot the answers. People have said to go to appleid.com and click on the password and security tab. I can't find that. Help!
Rescue email address and how to reset Apple ID security questions
-
I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699?viewlocale=en_US&locale=en_US
Try the link above. Try to find a phone number for your country, call and ask for account security. -
As above sentence. Suddenly, every time I start Firefox it opens with the Firefox tab and the Avast online security tab. This didn't use to happen. I've tried disabling it via Firefox (as it was loaded on the computer long before I had Firefox) which solves that problem but then the large green tick icon doesn't show next to the search list to show the site is safe. It's very annoying that it has started doing this and certainly don't want it!
Sorry you might as well as written it in double dutch. I didn't understand it at all. Previously I have said I don't understand computer speak.
-
Admin Server satrtup failing with the error User weblogic is not permitted to boot the server
Hi ,
The admin server is not coming up , its failing with the below error.
<May 25, 2014 10:28:35 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace.
I have tried resetting the password as per below link , it hasn't helped. Still facing issue. Please help
http://www.weblogic-tips.com/wls-security/
Thanks,
PradeepCreating New user did not help . Still same error.
<May 26, 2014 8:56:31 PM PDT> <Critical> <Security> <BEA-090404> <User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
<May 26, 2014 8:56:31 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<May 26, 2014 8:56:31 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>" -
How Can we change the Lookup in the Create User Form ??? Please Help
Hi ,
Can anyone let me know that how can the Value of the Lookup be changed in the Organization ? Like when we click on the Lookup of the Organization we see the names of the companies with Radio Boxes and we select a Company. If I want another value to be added beside the company then How I need to do that ? eg:
Org1: com1
Org1: com2
Org2: com3
Org3: com4
This lookup How can I do it ?With what you are referring to, there is no lookup required.
When you log into your administration console, you can create a new organization:
Organizations --> Create.
After you create, there will be more than the default organizations.
However, if you want to create a new organization type (Company, Department, etc) you can do this by:
Go to your Design Console --> Administration --> Lookup
Search for: Lookup.Organization.Type
Add a new value.
Save your formOnce you are done, go and create a new organization like before, and in the drop-down, that type will appear. -
I followed the instructions from your website on how to block all co9kies and i did not work. You used to have a simple menu for blocking and unblocking cookies, which seems to have disappeared. If I can't block cookies, then I will have to use another browser where I can. Thanks for your help.
To see all the History and Cookie settings, select:
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
See also:
*https://support.mozilla.com/kb/Cookies
* http://kb.mozillazine.org/Cookies -
I want the same Apple ID if I find myself answering,security my Apple id.
please send my email,security questions
thanks.
<Email Edited by Host>We are fellow users here on these public forums, you're not talking to iTunes Support - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info).
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use -
In Portal Content admin Role "Portal content" folder is not displaying
Hi,
I created a user in EP and assign Only Content admin Role. But in portal content area "Portal content "folder is not displaying.
Can someone help me the process steps to achieve it?
Thanks,
kundanIt is because the user has no proper permissions to the porta content folder.
you should give atleast read permission to the portal content folder to the content_admin role or to the users who have content admin role.
also make sure the end user check box is checked at the time of giving permissions.
Otherwise give eevryone group as read permisisons to the portal content folder. then you can see the portal content folder with read permissiosn only.
Raghu
Edited by: Raghavendranath Garlapati on Sep 1, 2009 9:32 AM -
I had to replace the hard drive in my iMac. Upon initial start up, I created a admin user name and password. Then I connected a WD external hard drive that had a back up of my orginal HD. Upon running Migration Assistant and pulling over the back up I found it pulled over the ORIGINAL user & security information from the original hard drive. In order to see iPhoto or iTunes libraies I must sign on to the "Old" user.
I want to Merge old and new users into only 1 user or delete the original user however need to have the iPhoto/iTunes libraies accessable by the "New" user.Your best bet is to start over, by restoring your entire system to the exact condition it was in. Otherwise, the transferred user account probably won't have permission to its backups. See the pink box in Problems after using Migration Assistant for an explanation.
See Time Machine - Frequently Asked Question #14 for details on how to do the restore.
Maybe you are looking for
-
I am using Robohelp HTML X5 build 584, with windows XP and IE6. I have used robohelp inthe past to generate web pages with help info which all worked well. I recently added new pages to the project and now it is not working. In the meantime I have tr
-
BSI Tax Factory 10.0 - SP level
Hi All, Is it a recommendation or requirement to be at SP 65 (6.04) to apply the notes for phases I, II, and III? What is the difference between 'Base HR SP' and 'Synch. HR SP' ? What SP is required for the new tool (sync payroll tax data)? We would
-
How to use a proxy with java applications?
I have a nokia 6300 type s40v3 hello, I would like to know if it is possible to use a proxy of any and how ? kind with java applications. thank you
-
TS1292 There are characters missing on my iTunes gift card, what can I do?
I have brough one of the thirty pound iTunes vouchers however one of the codes is missing charachters, what can i do to solve this?
-
I recently put all my relatives into Address Book under the corresponding name but noticed that when I sync to iPhone, the relatives dont appear. Why is this? The IM addresses still sync and the iPhone doesn't even have an Apple IM app!