No audio from speaker

Weird happening. Lost audio from iPod feature but can be played through headset and callers can't hear me unless speaker phone is on. Anyone run into this? Could you fix it? This is my 5th iphone. I hope apple will release a fix before Friday! Otherwise, I shall wait for a stable iPhone.

I doubt a fix will be out by Friday.
But who knows. I also expect future updates to the iPhone to fix a lot of the existing problems.
Good luck.

Similar Messages

  • There is no audio from speaker at top of phone.

    There is no audio from speaker at top of phone. Headset and speaker function working properly, but unable to hear through phone normally when making/taking calls. Others are hearing me fine. Help please.

    New phone?  Peel the plastic sheet off the front.

  • Problem with audio from speaker at bottom

    I have looked around the net and found several other people have had this issue, but want to know more about possible fixes.
    My iPhone 4 has an issue where the audio from the speaker on the bottom of the phone disappears. Randomly. It could be during a youtube video, or a game, or even just using the phone itself. If I leave the phone for a few minutes and come back to it, when I play a game or video, the audio returns.
    Initially the audio did not come back. And I restored the phone thinking that may help. But it didn't.
    So, has this happened to anyone else? Has anyone got an idea on how to fix this. Volume controls and mute switch all checked. I can't explain how it's happening or how to fix it.
    Any thoughts?

    well an update, im realizing that only one clip out of the 3 clips is where the audio doesnt work.  of course its the main clip with everything i need on it.  when i import the other 2 clips into pp the audio meter icon show on them and audio plays fine.  on the main clip its light purple and no audio meter indicating no audio.  but like i said i can play it fine and hear the audio perfect outside of pp.  all 3 were clips were shot at same time at same settings. TIA

  • NO audio from laptop speaker when phone connected to Bluetooth with media audio checked

    Hey guys, when I connect my Verizon Samsung Galaxy SIII (SGS3) phone through my Toshiba Qosmio x875-Q7280 Windows 7 X64 Bluetooth with media audio checked on my SGS3; for what ever reason there is no audio playing through the speaker when I try to listen to my music and for what ever reason I notice in the recoding tab under Sound my SGS3 profile mic audio bar was moving up and down. When I went in to configure it, I click a check box which played the music that I was playing through the laptop speaker but it sounded all muffled. If anyone can help would very much appreciate it.
    Solved!
    Go to Solution.

    Just wanted to update just incase someone else is have this same problem also, so I manage to solve this on my own my installing a bluetooth driver from Intel. I'm not sure if link posting is allow, so I'll just direct you there. If you google Intel and navigate to their download center, search for Intel® PROSet/Wireless Bluetooth Software for Windows 7* it should have two choice 32 bit and 64 bit. After it finish installing there should be another bluetooth icon in your bottom right tray. Next right click the bluetooth icon and add a new device as you would any other and enable media audio from your connected device (in this case it would be my Samsung Galaxy S 3) and you should be good to go with music or what ever sound coming out through the laptop speaker.

  • Multi-Camera Source Sequence Audio from 1 Speaker instead of both??? HELP PLEASE!!!

    So I have been at this for awhile now. Am I missing something?
    I simply take my 2 .MOV's and 1 .WAV and I create a mulit-camera source sequence. Except when I play it from my time line and it appears in my program pane it only plays the .WAV from one speaker...
    If I break it apart and load the .wav from the timeline into the source pane using keyboard shortcut "F" then it plays through both speakers..?
    Attached is a screen shot of the broken down Mulit-Camera Source Sequence by clip.
    Please help me, thank you!
    Multi-Cam sequence ONLY PLAYS AUDIO FROM LEFT CHANNEL, Adobe Premiere Pro CC.Multicam Editing in Premiere CC IssuePremier Pro Multicam Not Working.creating multi-camera source sequence w/ externally recorded audio

    I just tried that, although it still plays out one speaker when I play it in the timeline, either out or in the nest.  It appears that the timeline has an audio setting that is off perhaps? Or a bug? I have attached many images to check out... Thank you advance!

  • No audio from Right Speaker.

    Hi,
    There is no audio output from Right Laptop Speaker.But there is audio from Left audio speaker.If i connect external speakers ,there is audio from both speakers,same is the case with headphones.
    Please help me to resolve this issue?.My laptop is under 1 year on-site warranty.

    So funny! Last year I got the new Iphone 4S upgraded from a 3S. I also thought the speaker was broke on the left hand side. I put it down to old age, but when it happened again on the brand new 4S I went back to the Phone Shop running my mouth how I wanted it changed Right Now!! I was like its happening again and this time the phone is brand new bla bla bla. The guy just laughed and said mate that is a Mic not a Speaker! I just wanted to die hahaha. Walk of shame!!!!

  • How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!

    How can I play music through safari specifically youtube on my Mac book pro over soundlink to my bose wireless speaker I can only play audio from itunes at present? HELP PLEASE!

    Should be able to go into your sound preferences and choose your output device, you can also try downloading Airfoil and try that, it's a pretty cool app.

  • How do I get audio from my macbook pro to my receiver with higher quality than the headphone jack?

    I recently got a receiver and surround sound speaker system.  The quality of the audio from the CD player connected to it is far beyond the quality of the audio that comes from the MacBook pro via headphone jack to RCA connection.  This was confirmed by burning a CD from the MacBook, placing it in the CD player then testing the two against each other  -  the same audio piece from the CD player or the MacBook, both connected to the same receiver/speaker set up.  What other options might get better audio quality from the MacBook to the receiver? 

    The Mac's audio output doubles as a optical Toslink stereo mini jack, just use a adapter to regular Toslink and plug the optical cable to your surround sound system. Fiddle with the sound settings to enable optical output.
    Mac's pass surround sound through, they don't do any processing.

  • Recording audio from laptop with T420s and combo port

    Hi All,
    I sometimes need to run my companys application and record the spoken messages for demo's etc. Previously, I did this simply by playing the messages through the laptop speakers and at the same time using the Windows Sound Recorder to record it from the laptop microphone (I didn't even need to use external speakers or microphone).
    Now, with the new T420s that I have, when I speak into the laptop microphone it records my voice fine but when I use an application to play messages through the laptop speakers, the recorder does not pick up an sounds......is this a result of this "combo" port........if so, is there any way round it ?

    I meant what if you recorded just your voice, then added the audio from your demo after the fact?
    The sound chip takes the microphone input, and subtracts the speakers sound. This is what is needed most of the time, but in your case, it seems to be the exact opposite. Not sure if this can be disabled in SmartAudio.
    You'll probably need Virtual Audio Cable to record multiple streams.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Extract audio from a DVD how to

    Is there a FREE and ease way to extract audio from a DVD?
    Thank you

    Set a tape recorder next to your speaker? Seriously, though - what kind of DVD? If it's a commercial DVD, it's copyright protected and people here shouldn't give you advice on how to do it. There are other places besides Apple's discussion forums to get that kind of info, and I don't see why this question belongs in "Using Mac OSX Leopard" in the first place.

  • Looking for a wireless audio from any source`

    I have an Apple TV, iPhone 6, and Dell PC.  I am shopping for a  self-amplified speaker system which can WIRELESSLY stream audio over my home WIFI network (probably not Bluetooth) for BOTH the following:
    MUSIC AUDIO, from ITunes, Spotify, apps from iPhone or PC
    VIDEO AUDIO, from Apple TV or broadcast TV
    Shopping around there seem to be several brands which  do one or the other, but it’s not clear to me there is any system that does both. Is that true?
    For example, Apple’s AIRPLAY enabled speakers (or normal speakers hardwired to my TV) seem require streaming though Apple TV. Can I also stream Spotify or other apps with AIRPLAY speakers?  And NON-AIRPLAY speakers (like SONOS) clearly support most streaming sources, however do they also work with Apple TV for video, and if so without hardwiring the speaker to the TV?
    I’m looking for something that does it all, and without complicated workarounds, and with a seamless interface on my device. Wirelessness of the speaker itself—i.e. not hardwired to signal source like SONOS does—would be an added bonus, but not necessary.
    Some brands I am looking at: KEF  SONOS  Bowers & Wilkins Bose
    Can you help me, or set me straight if I am wrong about these assumptions?

    you should checkout the program called airfoil it let the user stream audio with airplay from any program not just itunes
    so that would make spotify be able to play out of airplay speakers be it an Apple TV or airport express with speakers connector or a
    device which was build to support airplay

  • No audio from w2408h monitor

    I recently had to replace a m9150f desktop with a 500-214.  I was attempting to use the original 24" monitor but am unable to get sound from the built in speakers. Also had this problem in the past with the previous tower, but somehow it would correct itself.  Any help would be greatly appreciated as the wife is having withdrawl pains.
    This question was solved.
    View Solution.

    Hi,
    How do you connect the monitor ? It has the following port at the back:
    Figure 6: Back I/O panel
    1 - USB 2.0: 2
    2 - Optical S/PDIF-out port
    3 - VGA
    4 - DVI-D
    5 - LAN
    6 - USB 2.0: 2
    7 - USB 3.0: 2
    8 - Audio: Center/Subwoofer port (yellow orange)
    9 - Audio: Rear Speaker Out port (black)
    10 - Audio: Side Speaker Out port (gray)
    11 - Audio: Line In port (light blue)
    12 - Audio: Line Out port (lime)
    13 - Audio: Microphone port (pink)
    Source: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04100368&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Redirecting audio from the mini box to the TB display

    I just installed the TB display update (12 Dec 2011).  On completion I'm prompted to select a connectivity.  Not understanding the ramifications, I select connection to the mini.  I now get the audio from the mini and not the TB display.  A big comedown.
    The question is how to redirect the audio to the TB displays speakers rather than the mini and its tiny speakers.
    cmd
    Austin

    To set up sound input:
    1 Choose Apple () > System Preferences, and then click Sound.
    2 Click the Input tab in Sound preferences.
    3 Choose Display Audio to input sound through your display’s microphone.
    To set up sound output:
    1 Choose Apple () > System Preferences, and then click Sound.
    2 Click the Output tab in Sound preferences.
    3 Choose Display Audio to hear sound through your display’s speaker system.
    These sound settings are used whenever your display is connected to your computer. They remain in effect until you change them.
    Apple Thunderbolt Display - Getting Started
    Stefan

  • Does anyone know a way to stream audio from Snow Leopard to a PPC running Panther?

    I have recently aquired a iMac PPC, I've freshly installed Panther on it and it runs a treat. I was wondering however if there is a way to stream audio from my main Desktop, a 2007 iMac running Snow Leopard. iTunes library share isn't a solution either as I use Spotify a my main source of music and unfortunetly it is no longer supported for PPC's.
    Thanks, Tim

    Unfortunately I could get neither of these to work, probably because of my own ineptitude.
    I couldn't get VLC to output from Spotify, this could be my own fault.
    I also couldn't make Airplay play with OS X 10.3.9.
    I did however find a messy workaround.
    I am currently using Airfoil on my main Desktop to output Spotify and then am receiving it on Airfoil Speaker on my iPhone, which is in turn connected to my 10.3.9 iMacs audio input via a 3.5mm Jack.
    You need to download an app called LineIn for 10.3 (http://www.rogueamoeba.com/legacy/) to play the sound from the input from the built in speakers.
    To be fair it's not that messy it just requires you to have a device that can have Airfoil Speakers installed on it and have a 3.5mm Jack.

  • Convert audio from mono to stereo

    I have imported video and audio from a camera with microphone, and the audio is only playing out of the left speaker. This is despite the fact that both A1 and A2 channels in the timeline appear to have audio. I'm new to this, and any help to get the audio to come out of both speakers would be great!

    Oh, wait a minute, I thought you meant you only had one audio track, and wanted its sound to come out both speakers. But now that I read your question again, you say that you have an A1 and A2. In that case, I dunno why you should have one dead audio track, unless you've accidentally turned it off, muted it, over on the left, at the head of the track. Or, if the tracks are not linked, maybe you've accidentally pulled its volume line down to the bottom (that red line running down each audio track that determines the volume level).
    If not, somebody else will have to solve that for you. Sorry.

Maybe you are looking for