No audio on playback in iMovie HD...help!
I have no sound upon playback in the program after transferring video from my camera...
As usual, and I have done this many times before...
I took my ZR90 camera out of the case, hooked it up to my mac via firewire and transfered my video. What is not usual is: When I play back the video (in iMovie) to begin editing, I have no sound what-so-ever. I can hear it during transfer through the laptop speakers, but then it has magically disappeared upon playback. I also checked an old saved project and there is no audio there either (and that one has been played and transferred to DVD previously. Any ideas? I have check every possible spot to checkmark or uncheckmark and I just can't figure it out.
Is this worth buying one-to-one membership and giving it up to the mac-genius gods? (I hope not, can't really afford the $99 right now.)
Thanks!
So it's only iMovie's audio that does not work. It's certainly strange that your previously functional project also has no audio now. The boxes at extreme right of the tracks all checked? All other audio OK still?
Have you tried repairing permissions (Applications>Utilities>Disk Utility)?
Also try trashing this file after closing iMovie:
Users(You)>Library>Preferences>com.apple.imovie.plist
Similar Messages
-
I imported a movie into iMovie 11 from a Canon Vixia HFR 300 SD card with no problem. I have a new iMac running OsX 18.8.4 I think. I added chapter markers and shared it with iDVD. And burned it to a DVD. Towards the end of this 30 minute movie the sound just stops. I do remember some screen came up when I wanted to burn DVD that said something was wrong with files but I couldn't figure what do to fix it and allowed me to continue. Any ideas?
Hi
Either the problem is in iMovie or in iDVD
two notes
No Audio in iMovie
Most common origin is use of audio from iTunes.
Work around -
• Select needed audio to one new playlist
• Copy out this as an Audio-CD .aiff (not .mp3)
• Use this in the movie-project
Other origins are
1. strange / alient file formats as -
• .mp3, .avi, .wmv etc
• Convert them into .aiff 48kHz 16-bit and use this
2. the Mac is set wrongly in regard of midi -
• Close iMovie and other programs
• Start GarageBand
• Make a new GB-project and play some notes
• Close GB and Save
• Now try iMovie again
3. No audio when playback in iMovie 1 to HD 6.
a. in iMovie pref. - deselect ” Playback via Camera”
b. in System preferences - see that Audio out is not set to zero. Mine often does this
without me knowing why.
4. iMovie’08 & 09 & 11
• Toggle audio-scimming by cmd-K
Stuttering audio and video
1. FileVault is ON - Turn it off
2. More than 50 audio files in a movie-project
Mix down to one audio clip
3. Project is stored on one (USB) external hard disk - should be a FireWire one
4. the External hard disk is not Mac OS Extended formatted - but
UNIX/DOS/FAT32/Mac OS Exchange and this will not work for Video.
5. To little free space on internal boot hard disk.
I go for a minimum of 25Gb free space when project is imported and edited and this goes for
4x3 SD Video. For 16x9 HD my guess would be about 5 times more at least.
Neither Mac OS, iMovie or iDVD can address any other hard disk than the boot drive for it’s
scratch files. (Unlike Final Cut Express/Pro where You select scratch disk/s)
6. Network storage - DOESN’T WORK
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
•OR burn with Roxio Toast™ if You got it
Yours Bengt W -
I haven't used itunes here much just been playing the songs I had on it. Now i downloaded some more songs i plugged in my Ipod touch and it's not showing up and giving me the message above (Itunes has detected a problem with you audio configuration. Audio/video playback may not operate properly. I uninstalled Itunes and quicktime restarted computer and still the same thing. What is going on?
Try reinstalling QuickTime, as this article suggests
http://docs.info.apple.com/article.html?artnum=304424
Other people have had luck with deleting their QT rpeferences file:
C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\QuickTime\QuickTime.qtp -
Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade LawrenceHello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen -
Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.
I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,... -
Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
epThis forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
NO AUDIO DURING PLAYBACK ON TIMELINE
Ever since I tried using the Narration tool in Premiere Elements 12, I have had nothing but problems with audio. The narration tool itself cause Premiere to crash. I decided not to use it again, but I continue to have problems. I can hear audio in the clips when i play them through the source monitor, but if I drop it on the timeline, then there is no audio during playback. I've already checked my audio output settings and I've already tried restarting Elements and my Macbook. I've even tried to change the audio output devices just to make sure I didn't screw it up when trying to activate the microphone for narration. Please help!
*NOTE - this is only a problem in the current project. When I made a new project, it played back fine. The problem is that I have hundreds of assets that I've renamed with descriptive file names, as opposed to the formatted file name the camera gave them.Good morning Steve.
Yes, there is a waveform on the clips. However, when I open Audio Mixer, I do not see any audio registering.
Also, I do not have a USB microphone plugged into my computer.
Finally, I have done the Audio Hardware check. I have tried using both "Built in Output" and "System Default Input/Output" but neither works.
Not sure if it helps to know this, but I have also tried to add music files to both Audio 1 track and also Soundtrack track. Neither one will play back audio on the timeline, even though I can clearly see the waveform on the file. It also does not register on the audio mixer. This tells me that it;s definitely an issue with this specific timeline. Is there any setting or mute button I may have accidentally changed? None of the mute buttons are checked off in the audio mixer. -
NO AUDIO during playback after converting the VIDEO using Creative Video Conver
I have a ZEN 2GB/4GB/8GB/6GB/32GB.
I tried to convert video from a dvd using Creative Video Converter.
The video is fine but there is no audio during playback.
What am I doing wrong?"If this is the case, the original video file may be in a format that contains muxed (multiplexed) audio and video, and cannot be exported with audio."..."If the format is "MPEG1 Muxed" or "MPEG2 Muxed," the audio portion of the file may not be retained with QuickTime Pro or iMovie."
I have read that article and I thought it ment that the sound will work after you convert to the MPEG4 format, which I did.
Are you saying that if it starts out as "Muxed audio" then there is no way to convert it?
If that is the case then in what situation would you need to use the Videora Converter?
Thanks,
Sean -
Problem with audio configuration that affects audio/video playback
Recently, when I watch video on i tunes that sound and picture to not match up. Sound seems to be on-time but the picture is jerky and behind. I un-installed my video driver and reinstalled. Problem persisted. I started my computer in safe mode and it said there was a problem with the audio configuration that effected audio/video playback. I uninstalled i-tunes and re-installed and the problem still persisted. I'm at my wits end and it is driving me crazy. Windows Vista is automatically updated so that's not the problem. Please help.
Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes for Windows: iTunes has detected an audio configuration problem
-
I purchased a iBook G4 with OS 10.5.6. I imported .mov files (shot in High Definition) -- I hear audio in playback but no picture. What's wrong?
What version of iMovie is this? Where did this media come from? It's probably in a format or codec not supported by your computer.
-
When I go to open Itunes, I get a message saying "Itunes has detected a problem with your audio configuration. Audio/Video playback may not work properly. I've tried closing and re-opening Itunes but it still comes up. I've also tried removing quicktime, repairing Itunes and restarting my computer after that. It still says the same thing. I've also tried reinstalling Itunes as well.
Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy -
How do I unlock audio from video in iMovie '11?
I've transferred some old videos to iMovie '11 using an ADVC-55 and there are some places where the audio has slipped out of sync with the images.
I have extracted the audio from these clips, so I can move it along the timeline to get it back into sync with the pictures - however, I cannot find how to unlock the extracted audio from the video, so I can move it along the timeline.
I've tried everything I can think of and iMovie's Help function doesn't reveal the answer.
This would have been easy in earlier versions of iMovie, but it's got me stumped in this version. Can anybody help, please?AppleMan1958 wrote:
Just drag the audio left or right.
Select a portion, then right-click/Split Clip, or EDIT/SPLIT CLIP. Then detach audio and drag it left or right.
This was exactly my problem - that didn't work!
I've realised now, though, that it was because I'd cut the clips so precisely that the audio couldn't be dragged either way - there was nowhere for it to be dragged to. I added some black space at the beginning and ends of the images and all now works OK -
Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC
Hi B, thanks so much for helping me troubleshoot !!
Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
* Sound Playback Default Device = No Playback Devices.
* Sound Recording Default Device = No Playback Devices.
* MIDI Music Playback Default Device = No MIDI Playback Devices.
All text in this drop-down box were light grey, and therefore unable to be selected or altered.
I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
Thanks again,
Shell -
Itunes has detected a problem with your audio configuration. audio video playback
itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!
See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696
Maybe you are looking for
-
Nokia N95 8GB takes ages refreshing even for one t...
Hi All. I have had this REALLY frustrating problem... Every time i add a track to my phone, then i refresh it takes AGES to update the library. Does anyone know how to fix this? Nokia N97 Mini V: 10.0.020 : 14/10/09 RM-555 Old: N95 8GB : V 20.0.016 :
-
Safari 5.0.5 (6533.21.1) - Lost ability to browse "https" urls, "http" fine
Bizarre occurrence in Safari for me that I was hoping someone may have come across before: Tonight for some reason it will not accept any https url whatsoever - it produces the following error: can't open the page <https://url> The error is: "The op
-
Recommendations For Iphone Apps!
Hello, Can I get some recommendations for some apps I can use for my iphone. Thanks!
-
Ipad error 37 and white screen HELP!!
Hi, I have an Ipad 1 not jailbroken and using itunes on a windows xp machine. Two days ago I had a notification on my ipad showing an update for the ios was available it started to download wirelessly. When I can back to check the device later it was
-
Hello, im using Jdeveloper to create a JSP Report .from there im building my report by reports developer. im using SQL SERVER 2000 as back end. i could create a report connecting to database through MS JDBC Drivers.Even the web layout could be run.bu