No auhorization to maintain Documents/Certificates CIS exists

Hello, I created a transaction and set up there three infotypes: 0001, 0002 and 0290.
User I logged in has authorities for IT 0001, 0002 and 9003 subtype of IT 0290 ONLY.
So even I have infotype 0290 subtype 9003 record created, I can't see tick in front of infotype
See picture 1 -- http://s002.radikal.ru/i198/1007/0a/db31858e5e54.jpg
When I try to browse records using Overview button or Shift+F8 hotkey I get an error message:
No auhorization to maintain Documents/Certificates CIS exists
See picture 2 -- http://s53.radikal.ru/i142/1007/dd/7a71dd3429b0.jpg
BUT, when I specify 9003 subtype in the STy field I will see the record
See picture 3 -- http://s61.radikal.ru/i172/1007/32/bdb93c27a521.jpg
What should I do to avoid that problem ? How to get records I need without specifying a subtype ?
Thank You.

I just put space value into subty field to authority object of the infotype and everything become work.

Similar Messages

  • Maintaining Documents in plant level

    Daer Folks,
                     Is there any possibility maintaining document at plant level without using LAB/OFFICE ? we have WERK(Plant) field in DRAW table but we are not assigning plant anywhere while creating document. is there any work around so that we can make use of plant field of DRAW to tale to restrict our document at plant level.
    Bhuwan Tiwari

    Hi,
    regarding the field 'Plant' I have to inform you that this could not be filled duing the document creation process via transaction CV01N or the BAPI. So I would recommend you to use the field 'authorization group' for your requirement. This field can be filled with a specific value for each plant.
    As soon as this field is filled you can define an authorization concept which only allows user to enter documents which have only a specific value in this field and so restrict all other user from entering. For further information on all existing authorization objects for DMS and also regarding the field Authorization Group please see the following link too:
    http://wiki.sdn.sap.com/wiki/display/PLM/AuthorizationObjectsin+DMS
    Best regards,
    Christoph

  • Billing document does not exist in VF22

    Dear Experts,
       We are working on Invoice list it gives output with LR00.
    but we have created a new output type ZPGR and assigned in
        SD>Billing>Billing document>Invoice List>Maintain Output for Invoice list
         Prgram-RLB_INVOICE and smart form ZS_INVOICE_PACK_2_GRP
    and VF21 i was able club billing documents. but in VF22 while issuing output it give error 'Billing document does not exist'
    checked and found because VBTYP in VBRK for invoice list document(LR) it is 3. but RLB_INVOICE program checking values MNOPSU56.
    any idea how to deal with, is there any other program instead of RLB_INVOICE to assign smart form
    Please suggest
    Regards
    Siva

    Hi Sunkesula,
    below is the sample Z print program.
    i copy some of the code from RLB_INVOICE and change the sapscript calling method to smartform calling method.
    REPORT Z_TEST.
    INCLUDE XXXX. "you may define any include you want
    INCLUDE XXXX. ""you may define any include you want
    *       FORM ENTRY
    FORM entry USING return_code us_screen.
      DATA: lf_retcode TYPE sy-subrc.
      CLEAR retcode.
      xscreen = us_screen.
      PERFORM processing USING us_screen
                         CHANGING lf_retcode.
      IF lf_retcode NE 0.
        return_code = 1.
      ELSE.
        return_code = 0.
      ENDIF.
    ENDFORM.                    "ENTRY
    *       FORM PROCESSING                                               *
    FORM processing USING proc_screen
                    CHANGING cf_retcode.
      DATA: lf_formname           TYPE tdsfname,
                lf_fm_name            TYPE rs38l_fnam.
    * SmartForm from customizing table TNAPR
      lf_formname = tnapr-sform.
    * determine smartform function module for invoice
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = lf_formname
    *       variant            = ' '
    *       direct_call        = ' '
          IMPORTING
            fm_name            = lf_fm_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        IF sy-subrc <> 0.
    *   error handling
          cf_retcode = sy-subrc.
          PERFORM protocol_update.
        ENDIF.
      ENDIF.
    "call the fm of the smartform. You may pass in any data you would like to display here
    CALL FUNCTION lf_fm_name
    ENDFORM. " processing

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • "Document  does not exist" exception when updating a Purchase Order, Agentry

    Hello Gurus,
    I updated a PO in SAP by calling the Bapi. It displays the error:
    com.syclo.sap.mm.steplet.POUpdateSteplet::throwExceptionToClient::1513::POUpdateSteplet - Document  does not exist |
    I checked on SAP and found the PO there. And in the log file, the PONumber, Company code are sent to the server. Then  why It throws the above exception.
    I spent a day but cannot find out what happen to the PO. Please help me. Thank you very much.
    Edit: Even though I hard coded the PO Number, it still display the error.
    JCO.Structure header = _imports.getStructure("IS_POHEADER");
      String poNumber = user.getString("transaction.PONumber");
      setValue(header, log, "PO_NUMBER", poNumber);
      String companyCode = user.getString("transaction.CompanyCode");
      setValue(header, log, "COMP_CODE", companyCode);
      String purchaseOrg = user.getString("transaction.PurchaseOrganization");
    JCO.Structure headerX = _imports.getStructure("IS_POHEADERX");
    setValue(headerX, log, "PO_NUMBER", poNumber);
    setValue(headerX, log, "COMP_CODE", "X");

    Jason,
    I checked the SAP error log and found the issue in the log. I am not sure if it is the cause of "Document doesnt exists. Please help me figure it out. Thank you very much.

  • Error "Account assignment 00 for  purchase document does not exist " when u

    Hai,
    I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
    The error says " account assignment 00 for purchasing document does not exist".
    The scenario is very simple.  I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10.  Tax code is U2 ( 7% tax).
    I am passing the following at header level.
    Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
    At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
    Does this error has got any thing to relate configuration matters?
    Regards,
    Upender

    Hi Upender,
    In some cases, depending on the type of PO / Posting,
    you might have to populate the accounting data itab and pass in the BAPI parameter.
    you can select the accounting data from EKKN for the PO.
    Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
    Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
    Thanks,
    Ram

  • Document does not exist (Message 06 619) in creation of PO

    Hi All
    Can any one help on this below issue:
    The error is 'Document does not exist' on each item that was on that RFQ to wrong vendor.
    That is because I sent them out on an RFQ with different vendor.
    Now I wish to process and save the PO to correct vendor.
    How do I get rid of those errors that do not allow me to save PO?
    Thanks
    Sada

    issue resolved

  • Message VF041 after System refresh - Billing document doesn't exists

    Hi ,
    We recently refreshed our QAS system and from then on we are having a strange problem .
    The issue is whenever I create a billing document ,it gives me a document number ,but when I try to view this in Vf02/03 it says "Document doesn't exists"
    when I checked the dump in ST22 , it says "A RAISE statement in the program ( Z print program for Invoice)raised the exception condition "FILE OPEN ERROR".
    I went and changed the Dispatch time to "Send with periodically scheduled job or Send with application own transaction " and it works . But Whenever the dispatch time is "Send immediately" it fails and throws a dump.
    Have anyone come across this error .We are getting this problem everytime after refresh . Do we need to do anything after refresh to avoid this kind of error.
    Thanks
    Sridhar

    Hi,
    Based on the sales order the following billing document was created. If i do VF02 to release FI posting that time system is giving the following error message.
    Billing document 8230231 does not exist
    Message no. VF041
    Diagnosis
    The billing document you specified does not exist.
    This document was possibly archived.
    govind

  • PO Print Preview  Error 06019 "Document  does not exist"

    Hi people , i`ve the following issue. I`ve noticed that when creating a PO if the user clicks con the "Print Preview" BEFORE Holding or Saving the document , the system will give the following error msg :
    Document  does not exist
    Message no. 06019
    And then the system will hang , you won`t be able to go back and the whole PO is lost . Does anyone knows how to solve this ? thanks a lot for any help .

    Issue already discussed in this link Re: Unable to Save RFQ and PO.

  • Shopping cart Document does not exist error while PO creation

    Hi Friends,
      We are in SRM 5.0 Extended Classic and ECC6.0. I am experiening a issue while sourcing. After shopping cart is created and ends up in sourcing cockpit, I try to create PO, I get the error 'Shopping cart Document does not exist'. I verified Number ranges, org structure, and config settings but unable to find a solution.
    This is at a critical stage where I am not able to create PO and hence process is not complete. I am not able to proceed further and need advise on how or where to look for possible issues. I did look at the other SDN postings but was not pertaining to mine.
    Thanks
    Rao

    hI
    Did you get below error message  **** pit.
    Data not found
    Document does not exist
    i believe the error message will not stop you to do sourcing.
    select and assigned to work area and assign source of supply and create a Purchase order.
    i also faced this error long back.
    br
    Muhtu

  • Word documents (New and Existing) paper area does not work correctly

    Hello all. I have a rather hard to explain situation with one of our workstations. It is an HP 8760w and it has had Office 2010 installed on it for quite some time. Currently, when opening a new document or any existing document, the program will look normal
    but will not show a cursor on the page. Scrolling wll result in the page looking obscure as if a graphics inside the document stops working. Scrolling will cause lines of text to melt into each other and will duplicate lines of text. The ribbon functions fine
    and hitting File brings up the entire menu like it should. Switching back to the document will show what was over that section in the file menu. How do I fix this? Installing and uninstalling office did not work along with changing the Normal.dot and deleting
    the Data registry file. 
    All help is appreciated greatly. 

    Hi Travis,
    This sounds more like a Graphic Driver or Graphics Card problem. You might try switching out the Graphic Card if that is possible on the system.
    Another outside possibility might be a corrupt user profile, so you could create a different profile on the machine and try it. However, my guess would be the Graphics Card is failing.
    Are you also certain there are no other Office add-ins loaded that might be causing this. Start Word in Safe Mode and see if this clears the problem. If it does, then systematically disable add-ins one at a time until the culprit is found.
    Hope this helps
    Kind Regards, Rich ... http://greatcirclelearning.com

  • How to maintain Document Type as Default in FB60

    Hi Gurus,
    How to maintain Document Types.
    I have a requirement in Transaction FB60 that Document Type should be Vendor Invoice as Defualt whenever i open this T.Code. (Now Cash Book - HO, coming as defualt in FB60).
    So please tell me from where i can make it as defualt Vendor Invoice...
    Is there any Trasaction for do this...
    Please tell me...
    Thanks & Regards...

    Solved Myself..
    Through SHD0 - Create Transaction Variant..

  • Error at the time of J1IFQ(Sub Contracting) "The Document does not exist."

    Dear All
    At time of Quantity Reconciliation for Sub-Contracting Challan (J1IFQ) i am getting the error " The Document does not exist."
    But 103 & 105 already made without any error.
    Please help me out.
    Chandrashekhar

    Hi,
    Could you please let us know process which you are following for it ?
    I hope it goes like this.
    - Create PO
    - Transfer posting goods to subcontractor
    - Create sub contracting challan
    - Receipt of goods
    - Quantity re concilliation
    - Closing the challan
    If it is with the above process..it should work..
    Thanks and Regards
    Deepak Gupta

  • 'Purchasing document does not exist' error while testing Inbound PO Idoc

    Hi experts,
    i am working on Inbound PO Idoc scenario. I am testing Idoc in WE19 with ORDRSP mesage type.
    Idoc type:ORDERS05
    Process code:ORDR
    FM:IDOC_INPUT_ORDRSP
    while trying to create PO it is giving an error 'Purchasing document does not exist' in we05.
    please suggest me how to resolve this???
    Regards,
    Bhuvan.

    Hi,
    first time i am testing this IDoc and i don't find any field in Idoc structure to provide purchase order value.
    any more inputs plz??
    regards,
    bhuvan.

  • I am replacing a Domain Controller (Windows 2003 Server) with a 2012 box. Can I have the Certificate authority exist in both locations during the process?

    Can you have the same Certificate Authority exist on both boxes while I work to get the 2012 up and running fully? Will it impact the users in any way or cause problems?

    > Can you have the same Certificate Authority exist on both boxes while I work to get the 2012 up and running fully?
    no. You have to uninstall CA role before you uninstall Domain Controller role from existing server.
    this is why it is not recommended to keep CA role on domain controllers.
    Vadims Podāns, aka PowerShell CryptoGuy
    My weblog: en-us.sysadmins.lv
    PowerShell PKI Module: pspki.codeplex.com
    PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
    Check out new: SSL Certificate Verifier
    Check out new:
    PowerShell File Checksum Integrity Verifier tool.

Maybe you are looking for

  • File adapter in BE

    Hi All,          Does File adapter work in BE mode.  In what scenario wil it be used? XIer

  • How do I open a table?

    I have tables in a database and can't see the option to "view" or "open" it and see all the data. I found "Select top 1000 rows" I am new to it, how do I open the table to see all headings and records and how do I export to Excel afterwards? Thanks. 

  • Migrating a 2009 mini to a 2013 macbook pro

    I want to migrate my licensed applications from a 2009 mac mini to my new 2013 macbook pro. What is the best method? firewire 800 to ethernet, or firewire 800 to thunderbolt? Or should I just manually reinstall all of these applications from scratch?

  • Maintaining internal links on Word files placed into Indesign

    I want to bring a word file into Indesign, which has a very large number of internal links. When I place the file in Indesign, the external  hyperlinks transfer as well as bookmarks, but the internal links do not., The blue colour and the underlining

  • Bluetooth and j2me, a frustrating scenario...

    Hello all, I don't want to use propeitory sdk's so I need to get a bluetooth stack working with the wireless toolkit but I am not going to pay for it so I downloaded the stack from javabluetooth.org, but when trying to compile a program which uses th