'No authorization' error for selection values outside the authorized range

Hi All,
We are currently trying to use the authorization analysis concept for 'Cost center reporting'.
We have made 0COSTCENTER info-object as authorization relevant and have created a analysis authorization object for it through RSECADMIN and we have maintained a single value as '1875' . We have assigned this object to 1 of the test users.
So now if the user runs the report for cost center '1875' , he is able to view the data/report. Now if he enters any other cost center apart from '1875' than he gets an authorization error (Everything works as per requirement till this point).
But now if the user enters multiple cost centers like 1875, 1876, 1877 as multiple single values and runs the report, he gets an 'No authorization error'.
So all the experts, please let me know if it's possible in anyway for the user to see the result/report for the value he is authorized to (in this case - 1875) and should give an information/warning/error message saying that he is not authorized to other cost center (in this case - 1876, 1877).
Same thing is occuring if user enters a range. Suppose a user is authorized for cost center - 1875 to 1880. Now if he puts multiple single values or range in between the authorized range than he can see the result but if he enters even 1 single value outside the range he gets an error - what I mean by this is - if the user enter a range from 1875 to 1801, he does not get any data display but instead he recieves an error message saying 'No authorization' even though he is authorized for all the cost centers in that range except 1801.
I would really appreciate your help regarding this. Any comments/suggestions are very welcome.
Thanks & regards,
Sunny

Hi Sunny
That is the way analysis authorizations work!!
If you ask for a number of values i.e. cost centers and you don't have authorization to *all* of them you will get a system error as you say.
There is no way of partially evaluating the query as you suggest (only for the authorized values).
Try to be less restrictive when defining characteristic values in RSECADMIN.
In queries use variables with
Processing by Authorization and Input Ready.
So the system will tell the user which are the allowed values. In your example the system suggests the range 1875-1880.
Hope this helps, regards
Germá

Similar Messages

I'm creating an array using a for loop, how do I get the values outside the loop while it is running? thanks

I'm creating a set of values using a for loop and a shift register inside the loop. I want access to these values outside the loop as they are being created inside. When I connect a wire from the shift register to a display outside, it doesn't work. How do I do this? Thank you.
Attachments:
tamko_new.vi ‏29 KB

I tried to create the local variable that was wired to numeric indicator inside the loop. If I try to connect this to the analog output outside the loop, the loop just starts blinking and nothing happens, am I doing something wrong? Thanks again.
Attachments:
tamko_new2.vi ‏29 KB

How to access a Matrix cell value outside the matrix in textbox?

Hi
I have created a matrix in SSRS. Columns are grouped by Channel Type. I want to access indicated cells value outside the matrix.
After Running the report the report shows
How can I access cell values outside the matrix? Please help

Hi Aladin92,
According to your description, there is a matrix in the report, you want to reference the first value of total outside the matrix, right?
In fact, Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope. Are the both textboxes in the same group. To workaround the issue, please refer to the following steps:
1. Click and select the matrix, copy it and paste it in the report above the original matrix.
2. Right-click handle of the first row in the upper matrix, click Insert Rows, then click Inside Group-Above.
3. Right-click second cell of the first row, then click Expression.
4. In the Expression text box, type the expression like below:
="A total of "& ReportItems!Textbox5.Value & "out of 258 BC CCRs have been evaluated"
5. Set the text boxes and rows visibility to be hidden except for the text box with expression.
The following screenshots are for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Need to get the selected values from the selectManyShuttle

Hi,
I am using ADF11g newer version.
I have a selectManyShuttle and a command button. Need to insert all the selected values on the right hand side of the selectManyShuttle into a database table.
I created the selectManyShuttle with the values. Need help in getting the values on the right hand side.
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
Any sample code or link is really appreicated.
Thanks

Thanks for the reply.
I am using a View Object and I dropped it as SelectManyShuttle
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2"
valueChangeListener="#{POBacking.getSelectedValues}"
valuePassThru="true"
autoSubmit="true">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
public void getSelectedValues(ValueChangeEvent valueChangeEvent) {
System.out.println("Testing Shuttle");
ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
String val = "";
String sqlStmt = "";
try {
if (list != null) {
for (int i = 0; i < list.size(); i++) {
int l = list.size() - 1;
val = list.get(l).toString(); //returns , delimited string
System.out.println(" value:" + val);
if (val != null) {
val = val.replaceAll("[\\[\\]]", ""); //remove []
StringTokenizer st = new StringTokenizer(val, ",");
int nto = st.countTokens();
for (int j = 0; j < nto; j++) {
String users = st.nextToken().trim();
System.out.println("Users:" + users);
//sqlStmt = " update xxpp_project_clip set clip_status='true', clip_seq = "+j * 10+
// " where project_id = "+rHdr.getAttribute("ProjectId") +
// " and clip_name ='"+ clip_Name +"'";
//System.out.println("sqlStmt:" + sqlStmt);
//stmt.executeUpdate(sqlStmt);
//am.getDBTransaction().commit();
//if (stmt != null)
// stmt.close();
// am.getDBTransaction().commit();
} catch (Exception ex) {
ex.printStackTrace();
I don't see the values in the list.
I gets printed as
value:[Ljava.lang.Integer;@1b10691
Users:Ljava.lang.Integer;@1b10691
how to get the individual values in the list?
Thanks
Saru

Copy select value in the textfield from LOV and allow user to edit it

Hi,
I have a datablock with 20 records and each record has comments (say field_comments) fields. I would like to allow user to choose predefined comments populated from LOV (say lov_comments) and to append some extra comments after they choose the value from LOV.
I have created a LOV and added Return type “field_comments” in the column mapping properties. When user clicks on a button, LOV opens up. They select the value from the LOV and the value goes to “field_comment” field. The problem with this approach, user can’t add their comment after selecting from LOV.
I tried this way too. I created another non-visible textbox (say dummy). In the LOV, I added “dummy” field as returntype. In the dummy field, I have created “POST-CHANGE” trigger which basically says :block. field_comments = :block. Dummy.
But, the user has to click on other field to view the selected value from the LOV. The values in the “field_comments” is not updated as soon as user click on “OK” button in the LOV.
I would appreciate it if somebody could give me some input and help to solve my issue. Thank you for your help.
Thank.

Well, I tried exactly what you posted and it allowed me to SELECT from LOV and then CHANGE/APPEND new text in front of returned value in the field. It saved to the database and queried without any problems.
Is your item allowed to INSERT/UPDATE ? If not, then set "Update/Insert Allowed" properties to Yes and attach your LOV to the item and set "Validate from list" to No.
You may also see if you have any validation being performed on WHEN-VALIDATE-ITEM or POST-CHANGE trigger which will fail since you are editing the values populated from LOV.
Hope it helps!

Schedule a Webi XIR2 report to run for all values of the prompt ...

Hi there,
Any ideea about if it's possible to schedule a Web Intelligence XIR2 report to automatically run for all 150 different prompt values in the LOV (and have 150 different instances)?
BOXIR2, Java deployment.
Many thanks.

You'd be scheduling the document 150 different times, each for one value of the LOV.
You'd use the ReportEngine (REBean) SDK to read the LOV values, then use the Enterprise SDK to schedule.
Here's a bit of code that illustrates how to schedule a Webi doc a single time with specified prompts. You'd do something similar, but iterate the prompt setting and scheduling:
    IInfoStore iStore = (IInfoStore) eSession.getService("InfoStore");
    ReportEngine reportEngine = ((ReportEngines) eSession.getService("ReportEngines"))
                                    .getService(ReportEngines.ReportEngineType.WI_REPORT_ENGINE);
    IInfoObjects objs = iStore.query("Select TOP 1 * From CI_INFOOBJECTS Where "
                                      + " SI_KIND='Webi' And SI_INSTANCE=0 "
                                      + " And SI_NAME = '" + reportName + "'");
    //============================================================================
    // Open Webi document, then get and set Prompts collection
    //============================================================================
    IWebi            webi    = (IWebi) objs.get(0);
    DocumentInstance di      = reportEngine.openDocument(webi.getID());
    Prompts          prompts = di.getPrompts();
    for(int i = 0, m = prompts.getCount() ; i < m ; i++) {
        Prompt prompt = prompts.getItem(i);
        String name   = prompt.getName();
        if("Enter value(s) for State:".equals(name)) {
            Lov lov = prompt.getLOV();
            lov.refresh();
            Values values = lov.getAllValues();
            prompt.enterValues(new ValueFromLov[] { values.getValueFromLov(0),
                                                    values.getValueFromLov(1)});
        } else if ("Enter Shop Id:".equals(name)) {
            prompt.enterValues(new String[] { "261" });
    //===========================================================================
    // Copy prompts over to InfoObject
    //===========================================================================
    PromptsUtil.populateWebiPrompts(prompts, webi);
    //===========================================================================
    // Schedule Webi report to run once now
    //===========================================================================
    webi.getWebiFormatOptions().setFormat(IWebiFormatOptions.CeWebiFormat.Webi);
    ISchedulingInfo schedInfo = webi.getSchedulingInfo();
    schedInfo.setRightNow(true);
    schedInfo.setType(CeScheduleType.ONCE);
    iStore.schedule(objs);
Sincerely,
Ted Ueda

Authorization error for referenced class javax/mail/Session.

All,
I am trying to compile a java source which is using session object in javax/mail/session.
I am getting the error java/lang/System: Authorization error for referenced class javax/mail/Session.
I used "import javax.mail.*;" in my java source..
I loaded both mail.jar and activation.jar using the below command in different schema other than the schema which above java source exists.
loadjava -thin -verbose -user <user>/<pwd>@<dburl> -resolve -synonym activation.jar
loadjava -thin -verbose -user <user>/<pwd>@<dburl> -resolve -synonym mail.jar
After loading, All java classes in mail.jar and activation.jar were in compiled state in that schema
Its working well in different database having the same configuration.
My oracle version is Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production

I have to accomplish tried in CONSOLE TestMail.class:
C>java TestMail
Exception in thread "main" java.lang.NoClassDefFoundError: javax/mail/Partmy make.bat:
javac -g -classpath
...\Java\jre1.5.0_06\lib\activation.jar;...\jre1.5.0_06\lib\imap.jar;...\jre1.5.0_06\lib\mail.jar;...\jre1.5.0_06\lib\mailapi.jar;...\jre1.5.0_0\lib\plugin.jar;...\jre1.5.0_06\lib\pop3.jar;...\jre1.5.0_06\lib\smtp.jar;...\jre1.5.0_06\lib\javamail-1_3_2-src-jrl.zip;...\jre1.5.0_06\lib\j2ee.jar TestMail.javaWhat isn't correct?
Tanks,
Mohammad

LOV doesn't return selected value to the base page

Hi All,
I have created an LOV based on VO. When I select value on the LOV page, it is not returning the selected value to the base page.
I am getting the error when I select any value .
Error
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
Can anyone please guide me which property has to be set.
Thanks,
Edited by: user4482525 on Apr 21, 2009 11:49 PM

1> Go to the About this page* of the page and check whether page Root AM is extended or not?
If the page root AM is extended then delete the extension by jdr_util.deleteDocument or using functional Adminstartor
or
2> See in the LOV CO, if you are using the method "releaseApplicationModule"
If yes , then remove this.
Thanks,
Kumar

How to clear the selected values in the JCombobox

Hi All,
Can you please tell - how to clear the selected values in the JCombobox
I have four dropdowns in my application, When I click "CLEAR" button, what ever the values selected in the four drop downs should go off and view as "SELECT" in all the dropdowns.

In addition to the above you should also check out [Combo Box Prompt|http://www.camick.com/java/blog.html?name=combo-box-prompt] which makes it easy to display the default prompt.

How to directly get the selected value in the dropdown

Hi Experts
    Now, in POV, i want to directly get the selected value in the dropdown. Because, the program doesn't enter the PAI before POV part. Therefore, the corresponding variable of dropdown doesn't store the selected value. That's reason why i want to find a way to directly get the selected value in the dropdown. is there any function module to do this?

you can use INITIALIZATION event which triggers first before any other events..
and u can use VRM_SET_VALUES to populate the values in the list
DATA : v TYPE vrm_values.
DATA : vw LIKE LINE OF v.
INITIALIZATION.
vw-key = '1'.
vw-text = 'ABC'.
APPEND vw TO v.
vw-key = '2'.
vw-text = 'DEF'.
APPEND vw TO v.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'A'
      values          = v.
PARAMETERS : a TYPE c VISIBLE LENGTH 10 AS LISTBOX.

How to go for selective deletion if the request is rolled up???.. URGENT!!!

hi all,
we a have a data target which was compressed and rolled up...
please do suggest us how to go for selective deletion if the data target was rolled up???
on what basis we need to do the selective deletion ??
thanks for ur understanding...
suggestions would be highly rewarded
regards
Prince

Hi,
in the subsequent datatargets of your ODS:
if the requests are only rolled up, then you can delete those requests; now if your aggregates are collapsed then you'll have to dactivate them and reactivate them after. If not you can simply delete them.
then delete all the requests from your ODS up to the request right after the missing one. This will deactivate you ODS delta init. This is not a problem since when you'll have finished with the above your ODS and subsequent targets will have a consistent status in terms of data.
Reinit your ODS delta without datatransfer, reconstruct your missing request and the subsequent requests in your ODS.
Reactivate them (not all together as a single activation, but separately).
Then load the delta into your subsequent targets.
Now if the subsequent datatargets are collapsed then you'll have to either reinit with full load or selective delete them. the missing request in your ODS still must be reloaded before!
If you go for selective deletion you'll have to find the right selection criteria based on the data of your ODS. For instance if you can ensure that only a selected period is incorrect (all the ODS requests from the missing one to the last only contain data for JAN08) then you can selectively delete JAN08 from your subseq targets and perform a FULL load selecting JAN08 from your ODS.
Then perform an INIT without data transfer... you can then continue your deltas as usual....
hope this helps....
Olivier.

Function module for retrieving values of the Characteristics?

Hi,
is there a function module for retrieving values of the Characteristics?
will reward,
regards,
M.

Hello,
Check this.
    L_OBJECT = G_T_STPO-IDNRK.
*--- Merkmale incl. Bewertung zum Objekt/Klassenart lesen ----------*
    CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
         EXPORTING
              CLASSTEXT          = 'X'
              CLASSTYPE          = '300'
              FEATURES           = 'X'
              LANGUAGE           = SY-LANGU
              OBJECT             = L_OBJECT
              INITIAL_CHARACT    = ' ' "keine unbewertete M.
              OBJECTTABLE        = 'MARA'
              KEY_DATE           = SY-DATUM
*            NO_VALUE_DESCRIPT =
              CHANGE_SERVICE_CLF = 'X'
              INHERITED_CHAR     = 'X'
         TABLES
              T_CLASS            = H_CLASS
              T_OBJECTDATA       = H_CLOBJDAT
         EXCEPTIONS
              NO_CLASSIFICATION = 1
              NO_CLASSTYPES      = 2
              INVALID_CLASS_TYPE = 3
              OTHERS             = 4.
Regards,
Vasanth

For "select-form" in the same page, add a cancel button in editing status

Dear JHeadstart team
For "select-form" in the same page, I still have a trouble.
How can I customize the Tempalte File to make the editing page have cancel button to abandon the edit.
If I want to learn the the JHS's Template costomizing (.vm file) and where can I find more reference documents about JHS's Template costomizing (excepting "Oracle JHeadstart 10g for ADF Developer's Guide").
thanks!

Can you be more precise on what you want:
- should the cancel button be displayed when creating new row AND editing existing row?
- when pressing the Cancel button, where do you want to go, to the select page?
Steven Davelaar,
JHeadstart Team.

HT2534 While creating an account from my iPad there is no option for selecting none in the payment options. It states I have to give my credit card details. What's the procedure to open a free account?

While creating an account from my iPad there is no option for selecting none in the payment options. It states I have to give my credit card details. What's the procedure to open a free account?

It's in the article. You must first sign-out your current account, then go to App store to purchase a Free App. It will ask you to either Sign in or create a new AppleID. That's when you start creating a new AppleaID and NONE will be available as a payment option.

Warning: There are Java errors for this object. The wizard will be read only until they are corrected.

when I try to open seeded VO.xml from Jdeveloper it is giving below error. Can any one please help me out.
Warning: There are Java errors for this object. The wizard will be read only until they are corrected.
R12 version 12.1.3
Jdev patchp9879989_R12_GENERIC.zip
Thanks
Venkata .T

Hi Venkata,
Same thing happening to me, R12.1.3. Please let me know if you find anything on this.
I tried some steps in this forums related to this, but no change. however I am not worried, customization works perfect after extension, but wanted to know the reason.
Thx..

'No authorization' error for selection values outside the authorized range

Similar Messages

Maybe you are looking for