No background color edges behind image on resize

hi,
I am making a slideshow background which adjusts to the width of the browser. However, whenever I resize the browser, the background color is visible for a moment along the edges. How can I get rid of this. I know that it is possible. If you look at the following site, the images resize perfectly:
http://www.timhupe.com
thanks
jy

and when i try to call the report from form builder,
it give the following error
REP-536870981: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
REP-0069: Internal error
REP-50125: Caught exception: java.lang.NullPointerException
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-536870981: Regards.

Similar Messages

Spry vertical menu button shows background color instead of image in preview

Hello All, I'm a newbie (to the forum and Dreamweaver) so my apologies if my question is not in good form. I've searched for this issue but cannot seem to find the exact problem I have.
I've created a website (my first) and used the spry menu bar. It works well using the default blue and grey colors for button and hover. However, I decided I want to spruce it up a little and change the buttons to use a background image (rainbow pattern) instead of background color. I internet researched this for some time and watched all the youtube videos people have posted for this process and editing the spry vertical menu bar CSS. Using the .a and hover lines from the CSS, I was able to add my background .jpg image file. In the design view, the button look exactly how I want them to. However, when I attempt to preview in IE, Chrome, or FF, the buttons still have the default colors and no image. I've gone back and deleted the default blue and grey, but then the preview just shows dark grey and white for the buttoms. is there something that I am overlooking that would cause the background color to show instead of the image I have attached to the buttons. I can't figure out why it looks right in DW but not in preview.
BTW, I'm editing a template file and all the pages are updated with the new image buttons, but none of the pages show correctly in preview.
Thanks

Point taken :-)
This is my spry vertical css code. No sub-menus.
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
border: 1px solid #CCC;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarVertical a
display: block;
cursor: pointer;
padding: 0.5em 0.75em;
color: #333;
text-decoration: none;
font-weight: bold;
background-image: url(/Images/Rainbow_Button.jpg);
background-color: ;
background-repeat: no-repeat;
background-position: center;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
background-color: #666666;
color: #333333;
background-image: url(/Images/Rainbow_Button_Hover.jpg);
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical a.MenuBarItemSubmenuHover, ul.MenuBarVertical a.MenuBarSubmenuVisible
background-color: #0000FF;
color: #FFF;

Background color only, no images :(

Hi and thank you,
Yes I'm new to DW be gentle :D Ive searched a bunch of other
threads but...Anyway I dont know what info you need. Im on Mac DW
CS3 V9.0. I use Firefox and DirectAdmin. Alternate Text is the only
thing that displays. This is the page source paste:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
<title>XandrosFoto</title>
<style type="text/css">

</style></head>
<body>
<img src="/Xanconstruc.jpg" width="992" height="494"
alt="construct" />
</body>
</html>
Im sure its a simple fix that Im not seeing. I used to be
great in frontpage about 5 years ago but I forgot everything and we
use everything adobe now.

File not found.
You sure you uploaded this to your server?
It says in the source now that you have it in your images
folder - yet it
isn't there, or its named something else.
Check the file on the server, and the naming of it also.
Brendon
"Xfoto" <[email protected]> wrote in message
news:fvl789$gbu$[email protected]..
> www.xandrosfoto.com

Background color of the image

Dear all,
i am using Developer suite 10g on windows 7.
i create a report, and insert one image which is in gif format.
the background of the image is coming black when i insert it into the report.
while, when i open it with windows previewer, there is no background of the image.
kindly guide me how to remove the black color from the background of the image in report builder.
regards.

and when i try to call the report from form builder,
it give the following error
REP-536870981: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
REP-0069: Internal error
REP-50125: Caught exception: java.lang.NullPointerException
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-536870981: Regards.

Image Component background color change

Hi,
I have am image object of an arrow in the xcelsius, I want the arrow as it is but want the background colour of the image object to be changed.
In short how can I get the background color of an image object changed?
Pls advice,
Thanks in advance,
Shreesh.

Hi,
In Xcelsius we dont have that option to change the background color of image. you Can edit in paint or some other image editor tools.

WorkOrderList TileView Row & Selected Row Background Color Change

Hi,
     can we change the background color of WorkorderList TileView Row & Selected Row Background color ?. Actually i am trying to change the color of both in WorkOrderList but it not reflecting any color on my Agentry client. I used a style on Tile List View Data/Style.
but these applied style on Rows & Selected Rows are not working in Agentry client.
if any other alternate solution exist in Agentry, please guide me.
i am using following...
sap mobile platform-2.3.3
Thanks & Regard
Manish Kumar
Tags edited by: Michael Appleby

Hi Jason
      Yes using Image we can achieve that goal but i want to use a background color instead of Image background. Finally I used a background color on label and set the that label field on Screen. And It's showing the background color on WorkOrderList Row & Selected Row that what i wanted. But on both Row & Selected TileView Screen showing white outline that i don't want and also i could not remove the default Selected Blue Background Color.
     Please guide me how to remove white outline and default Blue Selected Background color.
Thanks & Regard
Manish Kumar

Change background color in XML Forms

Hi all ,
I would like to implement this feature
currently we have xml Form it display Messages for CRM users but what we would like to implement is develop as stanadard as posible a solution to give more visibility for the newest messages
i don't mind if background color ,
with a image or whatever
i just check something about implement Custom Renders but i don't get info to develop on my own about interfaces to implement location of jar files
any help would be apreciate
Regards

i get it
changing html code in undelying xsl file

How do you keep the colors of an image true when you set it as a background?

I have an image with lines in it and a black blackground. When I set it as a background :
html {
    background: url(../Images/backgroundimage.jpg);
    background-repeat:auto;
    background-position:center top;
the black is a couple shades lighter so when I place a <div> with an <img>that is also mainly black on top of it, the top image is much darker than the background. I have no other css tags on the div other than a margin. The only difference in the images is I saved the background from photoshop and the image in the div from illustrator but I dont think that should have effected anything. Does anybody know anything about this because I am seriously stumped.
Thanks

We have been here before…
Firstly, Adobe' Photoshop has the ability to save a color profile with an image. That color profile will be consistent across all versions of Adobe software. Problem is, Adobe does not make web browsers (and that is probably a good thing).
When you save images for websites, you need to go through the proper Photoshop or Illustrator dialog. You want to Save for Web & Other Devices. Why? because the applications will take the image out of CMYK color space (if it is in that color space) and make it RGB. They will also try to translate the colors in a sensible way. When you use this dialog, you will see various options for JPG, including ICC Profile. Turning this on or off will change how the colors get mapped, and some experimentation to get best results is a good idea.
I have it turned off, presently.
The image will be set up for 72 dots per inch automatically, and you can, then, resize the image to optimize it for the website you are working on. If you are trying to fill a hole for an image that is 350 pixels wide by 250 tall, don't save the image as 1125 wide by 1024 high. That will take a long time to download from your server to whatever device is displaying it. Your original image will not be changed and you can navigate your path to your defined website's images folder.
This should help you immeasurably. I should mention that If I am trying to match a background exactly, I will tend to knock out that color from the image, save the image as a .PNG file with transparency (where that particular color is) and place the image on the background in question with the background color I am trying to match on the website.
-Mark

CS : Background color changes after saving image to jpeg,

Hi,
We have written a script for automatically saving the image to a JPEG format file. We are using VB.NET along with CS Script. To achieve that, we are doing the following:
we are resizing the images and setting the mode to RGB and make it 8-Bit/channel. We are using some default background color like FFFFFF (255,255,255) and FF88FF (255,136,255). These gets changed to FEFEFE (254,254,254) and FF88FF (255,136,255) changes to
'FE87FF'(254,135,255) dropping a point or so.
If any one works on that kindly let me know what is the problem. How to prevent the changes of background color.
Regards,
Amitabh

Hi,
We have written a script for automatically saving the image to a JPEG format file. We are using VB.NET along with CS Script. To achieve that, we are doing the following:
we are resizing the images and setting the mode to RGB and make it 8-Bit/channel. We are using some default background color like FFFFFF (255,255,255) and FF88FF (255,136,255). These gets changed to FEFEFE (254,254,254) and FF88FF (255,136,255) changes to
'FE87FF'(254,135,255) dropping a point or so.
If any one works on that kindly let me know what is the problem. How to prevent the changes of background color.
Regards,
Amitabh

Can you specify the background color when resizing the canvas?

I haven't found this in the Scripting Reference.
In the "Canvas Size…" dialog box you can specify the "Canvas Extension Color" to "Foreground", Background", "White", "Black", "Grey" or "Other…".
Can this be scripted?
I am writing an AppleScript to resize my canvas in order to add a slug to the bottom of the image. Currently my script stores the background color, so I can change it to White to accomplish my goal without discarding the background color (which gets restores at the end of the script). The problem is that if the user has a custom color (i.e. Pantone color) as the background color, the color does not get stored.

See if this works for you… Just some very basic AppleScript with a call to 'do javascript' in this case the variable 'Solid_Fill' this is a cleaned up piece of scriptlistener output (done very nicely by X's tools you will see a post below to the latest release of this) The scriptlistener output has been turned into a function that javascript can call. Inside of the function call I have put a list arguments passed from AppleScript. So the values 0, 0, 0, 0 in the AppleScript list end up as arguments passed to the functions C, M, Y, K variables. AppleScript objects are 1 based Javascript are 0 based & values the same.
set Solid_Fill to "function solidFillCMYK(C, M, Y, K) {
function cTID(s) { return app.charIDToTypeID(s); };
function sTID(s) { return app.stringIDToTypeID(s); };
var desc8 = new ActionDescriptor();
var ref4 = new ActionReference();
ref4.putClass( sTID('contentLayer') );
desc8.putReference( cTID('null'), ref4 );
var desc9 = new ActionDescriptor();
var desc10 = new ActionDescriptor();
var desc11 = new ActionDescriptor();
desc11.putDouble( cTID('Cyn '), C );
desc11.putDouble( cTID('Mgnt'), M );
desc11.putDouble( cTID('Ylw '), Y );
desc11.putDouble( cTID('Blck'), K );
desc10.putObject( cTID('Clr '), cTID('CMYC'), desc11 );
desc9.putObject( cTID('Type'), sTID('solidColorLayer'), desc10 );
desc8.putObject( cTID('Usng'), sTID('contentLayer'), desc9 );
executeAction( cTID('Mk '), desc8, DialogModes.NO );
}; solidFillCMYK(arguments[0], arguments[1], arguments[2], arguments[3]);"
tell application "Adobe Photoshop CS2"
activate
set User_Rulers to ruler units of settings
set ruler units of settings to pixel units
set Doc_Ref to the current document
tell Doc_Ref
set background layer of last layer to false
do javascript Solid_Fill with arguments {0, 0, 0, 0} show debugger on runtime error
move first layer to end
set Doc_Height to height
-- set Doc_Width to width did NOT need this
resize canvas height Doc_Height + 200 anchor position top center
flatten
end tell
set ruler units of settings to User_Rulers
end tell

When converting word doc to pdf, my images with text only show the background color of the text box.

I have a word doc that I am trying to conver to pdf. I have jpegs with text boxes on top of them on one page. It looks great on the screen but after I convert to pdf, the text boxes only have half the text, the first half of the text box is just white - the background color. If I take the background color out of the text box, the text converts over fine but I need the background color.
I have tried many things here on the print settings, standard, high quality print, unchecking the compression on the images. Any help?

Thank you for your posting. These forums are specific to the
Acrobat.com website and it's set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

How can I change the color of interactive image label box background.

Interactive image labels are a bit overwhelming in appearance. Can I change the label background color or make it partially transparent? I have tried several things and looked this up on Lynda.com training but no info.

don't know how much this might help but you can change some colors using the Inspector as follows:
from the text menu you can control paragraph and character colors, from the text menu you can control the text color.
hope this helps...

Changing the background color when opening an image?

I just installed Firefox on my new Windows laptop, and when I open an image in a new tab the background around the image is a dark gray. On my old computer the background is white, which I much prefer. How do I change this setting?

It is a new feature in Firefox 11+ versions to display a single image centered with an almost black background.
It is added by this stylesheet:
* resource://gre/res/TopLevelImageDocument.css
You can look at this extension to set your preferred background color and remove the centering.
* Old Default Image Style: https://addons.mozilla.org/firefox/addon/old-default-image-style/
See also these forum threads for other solutions (e.g. userContent.css):
*[[/questions/923127]]
*[[/questions/923431]]

Set background color or image in Outlook Today view

Hello,
I just started using the Outlook Today view in Outlook Data File and find it much easier to digest rather than scrolling through tons of folders for the 5 email accounts I have in it. However, the massive white background hurts my eyes, especially
at night.
Is it possible to modify the the color of this or add a background image to it? If changing it modifies other areas of Outlook feel free to add that as I'll try it out.
I'm using Outlook 2010.
Thanks!
Jordan

Hi Rvp711,
Follow the given path to change the background color of Microsoft Outlook 2010:
File >> Options >> Color Scheme (from the User Interface Options section)
But, by default Outlook provides only three color options for Outlook interface
*Blue
*Silver
*Black
http://office.microsoft.com/en-in/outlook-help/change-the-outlook-2010-color-scheme-HA102071588.aspx
http://office.microsoft.com/en-in/outlook-help/remove-or-change-backgrounds-and-stationery-on-replies-and-forwards-HA102546938.aspx
Note: Improve community discussions by marking the answers helpful.
Thanks
Clark Kent

Why are photos hiding behind background color on pages?

I am building a large book with over 350 photos as a gift for my 93 year-old father. I've done a number of books in iPhoto and am fairly experienced with the software. After the last system upgrade, this book seemed to be missing over half the photos. Upon closer inspection, I could tell the photos were there but with a colored background in front of them. I have moved and changed photos. Some stick and show; some don't.
When I view the book on All Pages, I can see all the photos are there, albeit very small. However, when I click on a page to work on it, or enlarge the All Pages any, photos start to move behind the background colors and I cannot tell what photo is there. After much work on this last night, I can see all the pages had all the photos showing (in thumbnail view). At last, I thought. Made a PDF version to preview it, but the PDF has colored background in front of half the photos.
I have spent hundreds of hours on this book and wanted to get it to my dad for Christmas (which will be late now) or before he dies . . . I have never encountered this issue on my other equally large books. Did the operating system upgrade cause this to happen?
Please can someone help me? LaVell

I found the black pages to show fingerprints.

No background color edges behind image on resize

Similar Messages

Maybe you are looking for