No Banner with Standard Room Templates
Hi all,
I'm getting crazy here.
I proceed as in <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/be/6ca0404dd52b54e10000000a1550b0/frameset.htm">SAP Help</a> but when I upload home_area_content_templates_fullupdate.zip I get all the Templates in "room_extensions / cm_stores / TEMPLATES" - but incomplete.
For instance in folder InformationSite I only get:
Announcements
2/15/05 3:28:51 PM Administrator,
Contacts
2/15/05 3:28:51 PM Administrator,
Documents
2/15/05 3:28:51 PM Administrator,
Downloads
2/15/05 3:28:52 PM Administrator,
Events
2/15/05 3:28:51 PM Administrator,
FAQ
2/15/05 3:28:52 PM Administrator,
Help
2/15/05 3:28:52 PM Administrator,
Images
2/15/05 3:28:51 PM Administrator,
InternalDocuments
2/15/05 3:28:52 PM Administrator,
Links
2/15/05 3:28:52 PM Administrator,
News
But NO Banner folder.....
However in the ice-content xml I see these entries for the folder Banner.
What's going on here??
Thank you for solving my problem! Points guaranteed!
Kind regards,
Philipp
Hi I guess this can be done. Please do not restrict the number of bookings per day if you decide to create just one room. If you can go by creating different areas, then you get the answer straight
Similar Messages
-
Error with new Room Template (containing KM Navigation iView)
Hello,
I created a new room template based on a newly created workset which just contains the KM Navigation iView. As I went through the template wizard step by step (Content Administration > Collaboration Content > Room Template Administration) I didn't add any External Parameters (Step 3) and didn't add any extensions (Step 4). In the Mapping (Step 5) I mapped all internal parameter to "room_id" since I didn't know it any better. Then I created a room based on this template. When I entered the room I got the following error message. Is it possible that the following error has to do with the fact that I mapped all internal parameters to "room_id" and that I did not add any external parameters or any extensions?
com.sap.portal.pcm.Title
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.ip.collaboration/Rooms/20dcad45-aaaf-2910-3289-d797c9b4a1ae/workset/km_documents/kmnavigationiview
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Thanks a ton for our help!
KatharinaHi,
Maybe you can post this issue in the portal platform forum. This may get you more results.
Rgds,
Soujanya -
Hello Folks,
I have an issue with the room templates.Can I use a old template name to a new template.after the old room template was being deleted?.
When ever I'm trying to do this..I get an error.Please clarify.
Thanks and Regards
Neha Chaturvedi
PS: Helps will be rewardedHello Neha,
Room Templates deletion:
Whenever the room templates are deleted. They are stored internally but hidden. Thus, a user cannot use the same name for the template over and again.
So, if this answers your query do reward it with 10 ;o)
Regards,
Anjali Dhingra -
Changing the portal banner with customized banner!
Hi Friends,
I want to change the portal banner with customized banner with logo. So for that, I created a customized banner and named as bg_banner.jpg by renaming the original as bg_banner1.
I modified them in both paths
D:\OracleBI\web\app\res\s_oracle10\b_mozilla_4\ and
D:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\b_mozilla_4
Also restarted both Presentation Services and OC4J
But still, I'm unable to view my customized banner instead I see the original LOGO missing. But able to view the rest of the banner with standard dashboard links.
Please correct me, where am I missing and do the needful.
Best regards
User622248Use a copy of the original and paint in this.
Than replace it there:
\bi\web\app\res\s_oracle10\b_mozilla_4
\bi\web\app\res\s_oracle10\b_mozilla_4\rtl
\bi\oc4j_bi\j2ee\home\applications\analytics\analytics\res + rtl.
Perhaps you forgot the \rtl\ banner?
Regards,
Stefan -
Collaboration Room Template problem with Roominformation iView
Hello all,
I'm trying to make a custom collab room template, but I'm having troubles with the Roominformation iView. It always gives me an error
<i>Portal Runtime Error
An exception occurred while processing your request
Exception id: 11:28_30/10/07_0005_2777350
See the details for the exception ID in the log file.</i>
What I've done is copied the Room information extended iView , paste it in a page, assigned that page to a the collabroom workset.
Is there perhaps some configuration I have forgotten ? If so, where do I have to do the configuration ?
Thank you in advance !
AbjuhOkay, found the problem. It was indeed some configuration that I've forgot.
com.sap.netweaver.coll.RoomInformationExtended
iView property com_sap_netweaver_coll_information_roomid = room_id (=parameter) -
Issues with modfication to Standard Web Template
Hi all,
I have created a copy(ZADHOC) of 0ADHOC standard template without any modifications. When I try to execute a query on the WEB with this template (ZADHOC) on Internet Explorer (Version 7 or 8), it gives me completely junk data (something in Japanese or chinese) while with 0ADHOC it executes fine.
The tricky part is that the same query with the same template (ZADHOC) on Mozilla firefox executes successfully. I am not sure if its a bug or so but if anyone has faced this issue earlier or knows a resolution to the same please respond.
I tried changing the standard IE settings but to no avail, it stll gives me the same Chinese or japanese or Korean (whatever ... No offense meant to anyone) junk data (Please note that this data doesn't have any image embedded in it). Also, the URL produced has language set to "EN", so this as well cannot be the issue.
Request help on the same.
Regards,
SreeHi all,
The Issue has been resolved
The problem occured because of an HTML Meta tag which by default added Unicode as the character set. This had to be removed and saved. A preview after this yielded results correctly.
Thank you,
Sree -
Hi All,
I have created a new Room template and have added other iViews besides the Room calendar.
Everything is working fine in the room except the Room calendar. I get the following error
<i><b>"Invalid RID: 20b1bad6-5c27-2810-d199-d91203b5c46f",</b></i> which i guess is the Room Id.
I even tried copying the "Calendar and Sessions" page from SAP Team room template into my template, but that also doesnt work. If I create a room using SAP Team Room template the calendar works fine, but not in a room created with my template.
The following mapping have been done
In the page com.sap.netweaver.coll.CalendarAndSessions_0
the property com_sap_netweaver_coll_gwui_roomid is set as room_id for component com.sap.netweaver.coll.RoomCalendar
The stack trace shows the following error
<i>#1.5#0002A5EF3C19004700000084000012A4000403FC3CBC5A48#1130281792354#com.sapportals.wcm.rendering.base.StatusFactory#sap.com/irj#com.sapportals.wcm.rendering.base.StatusFactory#amahto#8276####72cc642045ac11daaab50002a5ef3c19#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Plain###No status mapped to the given list type <http://sap.com/xmlns/collaboration/rooms/room> using hard coded default#</i>
Am I missing something somehwere?
Thanks, AkhileshOkay, found the problem. It was indeed some configuration that I've forgot.
com.sap.netweaver.coll.RoomInformationExtended
iView property com_sap_netweaver_coll_information_roomid = room_id (=parameter) -
How can I use KM document iView in a room TEMPLATE?
I want to use a KM document iView in a room template. The target document for this iView will contain some standard html content for every room built from this room template. This file's content and the folder structure for the room template will come from a room extension. The iView should be able to display the HTML in the target document, which will always have the same name (roomHome.html). How can I configure my room template so that each instance of rooms built from this template will be able to navigate to its own unique instance of roomHome.html?
It's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar. -
Differents Email Notifications for each Collaboration Room Template
Dear all,
I have two collaboration room templates. I want to know if I can have one Email (Notification) template for Room Template 1 and a second Email (Notification) template for Room Template 2.
Example:
For Room Template 1 --- > Invitation Email 1.
For Room Template 2 --- > Invitation Email 2.
Cheers,
Andres.Without knowing more about your customizations it's not possible to give you an exact answer. However, the way that I do this is by modifying the underlying workflow.
I usually do something like this:
<Action id='0' process='TaskDefinition-Notification-Process'>
<Argument name='template' value="mytemplate"/>
<Argument name='to' value='$(toAddr)'/>
<Argument name='cc' value='$(ccAddr)'/>
<Argument name='from' value='%%FROM_ADDRESS%%'/>
<Return from="notificationException" to="notificationException"/>
</Action>Note the toAddr variable, the ccAddr variable and the single template. You can either build it as one big list of email address and send it out once or use the standard workflow looping techniques and loop over the sub process over and over.
As with anything Sun IDM, there's a thousand ways to do to this, including hooking into a the viewOptions.process variable to define your own workflow where this can be done.
Anyway, that's how I solved it. -
PA_CONTRACT_XSLFO: How to invoke a RTF-template with related data template
Dear Reader,
actually I want to extend the standard Document Type Layout for a Purchase Agreement Contract with additional data from approved supplier list (ASL).
Therefor I have created a RTF-template and a data template with the needed sql-statement. For testing I put this in a standalone concurrent programm and it works fine (result was a blue table with all data rows).
Next step for me was to invoke the RTF-template into the PA_CONTRACT_XSLFO template for extending the Document Type Layout for my Purchase Agreement Contract. So I put the neede invoke-statements
<xsl:import href="xdo://XXOC.XX_RTF_TEMPLATE.de.00/"/>
and
<xsl:call-template name="XX_RTF_TEMPLATE"/>
into the XSLFO-template. Also I extend the RTF-template with the define template statement
<?template:XX_RTF_TEMPLATE?>
So all seems to be fine.
As result I get the standard document for Purchase Agreement Contract with the additional blue table from RTF-template BUT WITHOUT DATA !
From my point of view there is no execution of the sql-statement in data template. But I dont know why.
Do Oracle support a combination of XSLFO-template with data template?
[XSLFO-template] with related [XSD-data definition]
calls [RTF-template] with related [data template (with included sql-statement)]
Thanks for your help.
Best regards
Mario.How to call a rtf template from another rtf template by passing a value try in main template create hyperlink of url with parameters for another template
http://bipconsulting.blogspot.ru/2010/02/drill-down-to-detail-or-another-report.html
When user pull a quote report from siebel this new rtf template should attach to the quote at the end.it'll be only another report
IMHO you can not attach it to main. it'll be second independent report
you can try subtemplate but it's not about rtf from rtf by click
it's about call automatically rtf subtemplate from main rtf based on some conditions
for example, main template contain some data and if some condition is true then call subtemplate and place it instead of its condition -
Hiding buttons in the standard web template based on roles
Hi,
In the standard web template, the requirement is to hide few buttons based on the authorization.
Can this be achieved by assigning the roles? If not what is the work around?
Regards
NarayanaNarayana,
Restricting the Buttons is not feasible thru Role restrictions, you need to work around with the WAD..
Action Events with Btn Clck.
Cheer's
HVR. -
Room Template Changes not reflecting
Hi,
I have a Collaboration room template called Community. In that I have the Quick Poll Maintenance iview. I was getting the following error while creating a quick poll. When I try to add an image to a response in the quick poll, it gave me portal error. This was happening only inside the Collaboration room and not outside. Then I changed the mapping of the property PathToImages for the iview in the template to private_docs_path and saved the template.
Now the error does not come in the new rooms that I create with this template. But the old rooms are still having the problem. Any idea why?
Alos, for my old room the template is being displayed as Community_&VER&22 and for new rooms is Community_&VER&28. Is there any way to synchronize the the template versions?
Regards
RanjithHi,
which version of the portal are you using?
Starting with NW04 SPS 17 / NW04s SPS8, you can transfer changes from the template to existing rooms. Before these releases, this is not possible. Please have a look at http://help.sap.com/saphelp_nw2004s/helpdata/en/44/168eb1c3641a75e10000000a1553f6/frameset.htm
Kind regards
karin -
Error in Room Template Creation
hi,
In portal we developed our own room template.Due to some reasons we have deleted that room template also.After deletion the room template name is not appearing in the dropdown when I try to create a room.
But when we tried to create another room template with the same room template name which I have deleted earlier, it is giving an error 'No valid name for room template'. what is the reason.........
Is the deleted room template existing anywhere?
Thanks and regards.
shami.Hello Shami,
Deleted room is not existing but its record is maintained in Room Template Version Folder.( I am referring NW2004s, EP7.0, SP11)
So it might not allow the deleted name to use.
Sorry I can't attach the screen shot to prove my point .
Thanks and regards,
Pradnya -
Mappings In Room Template Administration
I have created a new Collaboration room template based on duplicating the existing Meeting_Room_Extended template via Room template administration. I have added the additional page of Documents (via the PCD). When I run the VALIDATE function on my new meeting room template I get informational messages saying that I don't have mappings.
Here are a sample of the warnings:
No mappings provided for iView com.sap.netweaver.coll.documents_2_level on page com.sap.netweaver.coll.RoomDocuments
Define the mappings required for the iView in the template
No mappings provided for iView com.sap.netweaver.coll.RoomInformationExtended on page com.sap.netweaver.coll.RoomDocuments
Define the mappings required for the iView in the template
I know where I need to enter the mappings on the template administration, however, I don't understand the underlying purpose behind the mappings. Can someone please give me an explanation of what the purpose of the mappings is?
Thanks
Angie.
PS: I am running NW2004s (EP7) with SP9.Hi Angie,
have a look at this presentation from SAP NetWeaver Product Management:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0bf27c0-1c2e-2a10-80a2-bd78bf6c89c7
I believe that it explains pretty well the concept behind the Room Extension Mappings.
Let me know if you have further questions,
Robert -
Standard Mapping Templates for XML to Invoic02
Hi Experts,
I have been provided a customized XML from a partner which needs to be mapped to Invoic02 (Invoice Idoc).
I wanted to know whether there are any standard mapping templates available for standard xml to invoice mapping (Example:
XML standards are followed by xcbl).
I have not been provided with the MIG.This will be helpful to me so that i can initially take up some of the field mappings.
I have the following message which needs to be mapped to Invoic02 idoc :
<?xml version="1.0" encoding="UTF-8" ?>
<BlMessage>
<TransactionInfo AcknowledgementRequested="false">
<MessageSender>XXXX</MessageSender>
<MessageRecipient>XXXX</MessageRecipient>
<MessageID>XXX20090727_140928</MessageID>
<Created>2009-08-18T14:09:28.450-07:00</Created>
<FileName>XXX_310_20090727_140928560.xml</FileName>
</TransactionInfo>
<BL Sequence="1" Purpose="Original" BillType="SeaWaybill" CarrierScac="AAAA" ServiceType="NoCFS" MoveType="PortToPort" ShipmentId="22222" Payment="Collect" BLNumber="11111111">
<References>
<Reference referenceType="MutuallyDefined">20090406</Reference>
</References>
<Voyage>
Thanks,
SudhansuI had to create an customized xsd.
Maybe you are looking for
-
Adobe Acrobat 8.1 STD & MS Project 2007 crash after converting project files to PDF
Need some help. Currently I create complex projects schedules (3-7 pages in length) and then convert to a .PDF thru Adobe Acrobat 8.1STD and although it takes a little bit, it does create the .PDF file. However when I open in Adobe Reader and try to
-
Creating dual monitor workspace
I found one ancient message from September with absolutely no responses, so let's try again..... Bridge CS4. Dual monitors. HOW do I create and SAVE a workspace that takes advantage of both monitors? I want to put previews and some palettes on one mo
-
In valid Date set in the column
Hi I am facing a problem with the in valid date getting set at the time of updating the record. The problem is , I am fetching the record for update and sending the created date fetched along with other values and the updated date is set to the syste
-
Plz Help : Can use drop table in dataset query...?
Can I use this script in my dataset Query in SSRS 2008 R2?
-
Alerta An error occurred with the pop3 mail server. Mail server responded;
Boa tarde, ao receber email´s aparece a mensagem: Alerta An error occurred with the pop3 mail server. Mail server responded; Não utilizo gmail nem yahoo, outros usuários recebem normalmente os emails. PAra enviar está normal sem problemas. Obrigado.