No binaries found for Verification issue in MPR Code Signing Test case

Hi,
We are trying to certify our WebSite Application as Gold Certified and to become Gold Certified Partner. We have run a MPR Test and while verifying the Code Signing test case, it shows that
"No binaries found for verification". But the test case result is
passed. Below I have placed screen shot for the same. We have signed all our Application related DLL's(Page related DLL's. Please let us know about this issue.
Shankar S

Hi Shankar,
To the MPR Tool, it does not appear that you have installed any binaries.
As you mention that your website contains DLLs, these have either not been installed via your MSI package or have already been installed before the test began.
The tool will prompt when to Install, when to perform Primary Functionality, and when to Uninstall.
If your website was already installed prior to beginnign test, you must retest.
As you are applying for Gold level, assure you are testing on Server Core.
Hope this helps,
-Logo

Similar Messages

HT204053 trying to get a free app on iphone. when i hit install a pop up window ask for verification and a security code which i do not know

trying to get afree app on iphone. I get a pop up saying verification required and ask for security number which I do not know. I am new iphone user need help please.

Have you tried entering your credit card security code (cvv code: http://www.cvvnumber.com)?

Each time I log into the apple store on iTunes (windows), my Ipad or either of my iPhones it asks for verification of the security code on my credit card. This is very annoying, any way to make the entry stick?

Whenever I log into the iTunes store on my Windows PC I am asked to enter my credit card security code, this is annoying but now all of my devices ask for the same information. The trigger seems to be access from another device. Should I deathorize all accounts and then reauthorize them?

Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away.

CO_TXT_OUTBINDING_ERROR , No standard aggrement found for ,

Hello,
I have a scenario XI-to-IDOC. I created a Service Interface and publish them as a Web Service.
I created a WSDL file from the Integration Builder(Configuration) and When I test the WSDL with the XML Spy, I got a following error message,
CO_TXT_OUTBINDING_ERROR , No standard aggrement found for , ...
But when I test with PI tool (the Component Monitoring>Integration Engine>Test Message)
The message is processed successfully.
And there is a differences between the two messages in the message monitoring. The Receiver Namespace and The Receiver Interface are different.
Message with Successful: The Receiver name and interface are name of IDOC
Message with Error:The Receiver name and interface is name of Service Interface.
And My Integration Configuration is following.
1. One Receiver Determination
2. One Interface Determination
3. One Receiver Agreement
What should I do for that error?
Thanx for your help..
Hasan

Hello, I discovered something about the problem,
My Service Interface has operations which have the type of external message.
I created data type and message type then I used the message type for that operation instead of external message.
I also changed source of message mapping which was the type of external message. I changed it as a message type.
Then it works.
But I have to use the external message. because my wsdl has a special characters. Which includes "-". I cannot create Data type includes "-".
Is there a solution for this..
Thanx.

Getting error while writing JUnit test case for RestFul Services

Hi All,
I have written Restful services in Netbean 6.8.
It's running well...no issues.
{color:#0000ff}While writing JUnit test cases for them, I am getting following error:
{color}{color:#993300}Testcase: testGetAuthenticated(com.ct.services.LoginServicesTest): Caused an ERROR
Implementing class{color}
java.lang.IncompatibleClassChangeError: Implementing class
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:160)
at org.eclipse.persistence.jpa.PersistenceProvider.createEntityManagerFactory(PersistenceProvider.java:65)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:52)
at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:34)
at com.ct.services.LoginServices.getAuthenticated(LoginServices.java:205)
at com.ct.services.LoginServicesTest.testGetAuthenticated(LoginServicesTest.java:84)
Test com.ct.services.LoginServicesTest FAILED
F:\NetbeanProjectsWorkspace\DemoProject\nbproject\build-impl.xml:972: Some tests failed; see details above.
BUILD FAILED (total time: 11 seconds)
{color:#0000ff}Strange thing is that when I am commenting below lines and its related calls:
{color}
{color:#ff0000}EntityManagerFactory mEmf = Persistence.createEntityManagerFactory("AnyName");
EntityManager mEm = mEmf.createEntityManager();
{color}
{color:#0000ff}from my code, JUnit test cases are working fine.
{color}Anybody having any idea about this ?
Thanks
Avi
Edited by: Avi007 on Aug 28, 2010 5:17 AM

Hi All,
[http://stackoverflow.com/questions/2778295/test-driven-development-problem]
Please refer the above link for the solution
Thanks
Avi
Edited by: Avi007 on Aug 30, 2010 12:33 AM

Windows 7 Comparability for SHA-256 (Code Signing)

Dear All
I want to know when the update for windows 7 (SHA-256 Code Signing Comparability -- for Kernel driver) will be available?

Hi,
I'm not sure whether you know this update KB 2949927, Microsoft is announcing the availability of an update for all supported editions of Windows 7 and Windows Server 2008 R2 to add support for SHA-2 signing and verification functionality.
http://support.microsoft.com/kb/2949927
Microsoft Security Advisory 2949927
https://technet.microsoft.com/en-us/library/security/2949927.aspx
This blog can also be helpful
Microsoft Security Advisory 2949927
http://blogs.technet.com/b/pki/archive/2010/09/30/sha2-and-windows.aspx
Yolanda Zhu
TechNet Community Support

In service order Issu:No account assignment found for this service process

Issue:No account assignment found for this service process
An error has occurred in the system RT1400LS while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
No account assignment found for this service process (Notification E CRM_SRV_LOG_EXT_OLTP 008)
While we created the service order as a fallow up document of the quotation system unable to create the PR. System showing the above error in the service order.
We created the service order with same items directly not as fallow up document to quotation PR created with out any fail.
As per my analyses above error because system unable to find out the Internal order to create the PR hence we created service order as a fallow up document of the service quotation.
Revert require data to understand the issue more.
Best Regards,
Prakesh

Dear Gurus,
Thanks for your update. we checked as per your suggestion but the issue is PR is not determining the IO while creating the PR.
We used the different item cat in quotation and service order system generating the PR, But our Clint want to use the same item cat in the both service order and quotation.
If we created the quotation after that service order with the service line item and spare part line item system creating the IO (internal order) but PR not generating.
Please help me in this scenario what should we do.
Best Regards,
Prakesh.

SFTP Issue in OSB invocation resulted in an error: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,ip

I created a Proxy Service to do pull file and push it to sftp server
known_hosts file is present on OSB server.
It has abcserverhostname,IP ssh-rsa AA................. ==
I created a business service to do SFTP push to sftp server (remote) - Its not working.
<Error> <SFTPTransport> <BEA-381826> <Key Not Found for host hostname,10.124....>
com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124.....
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
My Business Service
End Point URI : sftp://sftpserverhostname:22/directorypath
Authetication Mode : user name, password.I have created a Service Account for sftpserver and imported in Business Service.
Do I need to give anything else in known_hosts file ?
and hostname can be any random name?
<Dec 11, 2013 1:45:37 PM GMT+08:00> <Error> <SFTPTransport> <BEA-381801> <Error occured for endpoint com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124....
com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:161)
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:111)
at sun.reflect.GeneratedMethodAccessor566.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
Caused By: com.maverick.ssh.SshException: ssh-dss Key Not Found for host eirnode2,10.124.10.16
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.A(Unknown Source)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.verifyHost(Unknown Source)
at com.maverick.ssh2.TransportProtocol.C(Unknown Source)
at com.maverick.ssh2.TransportProtocol.processMessage(Unknown Source)
Truncated. see log file for complete stacktrace

BEA-381826 suggest that there is any issue with your public key in known_host file, can you cross verify it again. Also can you check if known_host file has appropriate permissions and I am assuming it is in /OSB_DOMAIN/osb/transports/sftp folder.
Hostname,IP algorithm publickey are the hostname, ip, and public key of SFTP server.
As per troubleshooting guidelines
The Key not found for IP, host error message indicates that the known_hosts file does not contain an entry that corresponds to the specified IP-host combination. If the entry exists, then try with another algorithm key; for example, if the earlier attempt was with an RSA key, try again with a DSA key.
Cheers,
Sahil

Issue with Shopping Cart ... No Address Found For Partner Function etc.

Hi Experts,
I am facing an issue in EBP.
Using SRM 5.0 classic scenario.
While creating a shopping cart we are experiencing the following ERROR: "error in system, shopping cart cannot be processed any further."
The details of errors are as below:
No data found for contact person XXX. inform System Administration (XXX is the BP ID of the user)
No address found for partner function type Goods Recipient
No address found for partner function type Requestor
Please help me in overcoming the issue.
Thanks,
Pratyush

Thanks for your reply
I have already checked that the BP number is present.
However using bbp_bp_om_integrate i got the errors:
using user ID from su01: I got a red signal in Object Existence / Consistency with error
"Business Partner for user XXX is missing or containing errors"
using CP & BP : I got a red signal in Address consistency & following errors:
"Error determining address for employee XXXXXXXXXXXXXXXXXXXXXXX" & "Address for person (BP) XXX missing"
Please help

Data Loading issue - No local currency found for plant 0001 and sales org

Hi Guru's,
I am trying to load data to 0PLANT_ATTR and I am getting the following error message:
1. No local currency found for plant 0001 and sales organization 0001
2. Plant 1010 : No sales organization found; Local currency cannot be checked
I have also maintained the global setting for currencies in RSA1 for that particular Source System.
Please let me know how to resolve this issue.
Thanks in advance.

Hi,
Refer the lnik and the note mentioned it.
Re: Problem when storing master data 0PLANT_ATTR-Full (i.e. Full Update)
With rgds,
Anil Kumar Sharma .P

HT201485 My iphone won't let me download apps and refers me to my computer for verification. My computer will not access itunes due network issue. How to make iphone stand alone for downloads & updates.

In iTunes my iPhone refers me to iTunes on my computer for verification. iTunes won't work on my computer. How can both my iPhone and iPad stand alone?

Turns out that when my iPod Touch was restored, the restrictions had been turned ON for Facebook and several other apps. This is what was preventing the Facebook app from accessing my Camera Roll for picture downloads. This is odd since all of my iPod backups would not have had those settings turned on. This is also the first time this has occurred given the few times I've had to restore my iPod Touch.
Anyway if you experience the same behavior from your iPod or iPhone with iOS 8.0.2, just go to the General settings and review your settings under Restrictions. Once you set them to allow for changes, you should be back in business.

KB15N_No adjustment account found for cost element Message no. K5112

When I am trying to post Manual Cost Allocation through TC KB15N with the following input data I am getting the following error message and the same could not be posted. Kindly advise.
Screen Variant used: 01 SAP Cost Center
Input Type: List Entry
Item No.1
Sender Cost Center : 3402100942
Cost Element: 6200001
Amount : 62,201.56
Receiving Cost Center: 3405100945
First four digits represent profit center code. If first four digits are equal the above error is not coming. But posting is needed with different profit centers.
No adjustment account found for cost element
Message no. K5112
Diagnosis
Neither standard account determination nor the enhanced function found an adjustment account for the reconciliation posting.
System Response
No adjustment account could be determined for cost element in company code SCCL.
Procedure
Maintain the standard or enhanced account determination for transaction KAMV. Information on maintenance can be found in the program documentation.
Execute

Hi all,
I face the issue like this but with transaction KOAP - Plan settlement
But, the problem is that, I do not active reconciliation ledger, so I do not maintain any thing relate to reconciation ledger or adjustment posting? I can do transaction "actual settlement" without error
So, How this error come to me?
And how I can fix it?
Thanks all!

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

Error 'No tax code found for difference' in Posting Vendor Invoice IDOC

Hi All,
I am getting error message 'No tax code found for difference' while posting Vendor Invoice IDOC into SAP. IDOC type is INVOIC02. There is no difference in PO price, Invoice price and even Standard price. then why this error message? Other Vendor EDI settings are done ( OBCA, OBCD, OBCE etc). Is there any thing specific to be done in the config for this error?
IDOC has PO as reference document.
I looked into several threads in SDN forum but could not find proper solution
Can any ine help me with this issue?
Thanks in advance
Hari

Hi
You might be missing the tax code for uploding through IDOC
so you can use the t.code we02 and give the doc and find the error
go to the WE19 to edit the tax code
and USE the t.code BD87 to select the doc and process it
thanks
Madhu

LIBOVD ERROR - "validateContextToken: workflow session was not found for given context. Create a new workflow session with token"

Hello everyone,
I have the following scenario:
We're using "Oracle SOA Suite 11g 11.1.1.7.0" (Patched w/ 17893896) mainly for a BPM/Human workflow composite. Former, we were having the error bellow:
<Mar 16, 2015 1:13:03 PM BRT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Verification Service cannot resolve user identity. User weblogic cannot be found in the identity repository. Workflow Context token cannot be null in request.
ORABPEL-30511
When that error ocurred, no one was able to use the system (BPM/Human Workflow).
I opened an SR, and after some analysis from the support, it recommended me to set up "virtualize=true" in EM, and restarting the domain. Then it started logging the following:
connection to ldap://[10.200.10.57]:7001 as cn=Admin.
javax.naming.NamingException: No LDAP connection available to process request for DN: cn=Admin.
Looking up on support KB, I found this note Doc ID 1545680.1 and increased from Max size of Connection Pool 10 to 200. That did work successfully! Problem now is that the <SERVER>_diagnostic.log is being filled up with the following error:
[2015-03-31T16:03:46.421-03:00] [soa_server2] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: e0194e38aa6c9a2f:39fc1ff9:14c5def5247:-8000-00000000000a5653,0] [APP: soa-infra] <.> validateContextToken: workflow session was not found for given context. Create a new workflow session with token=51490173-e3d0-41dd-ae99-983915aa8454;;G;;Z+P7Oe9ABnoTUQD9ECryEW2l0/8yRcqPDyZsOWBCuzMmRgA3Qsj601TxmWQ87z2MjuwW5AH+KzgjIwkPmhJFdpc1FrE6Y/MrN1bxIDHJWu2/zP3iSNwKD07hRrh/U37Ea0TvaQyuaHJIog9y3Ptmzw==
One important point is that we're using only the embedded WLS ldap. So I am not 100% sure if we should be using the virtualize flag=true, once all docs I read point out that this should be done when using multi-ldap providers.
Also, I only got this error in the "diagnostic.log".
Although, no user has complained about using the system, I really want to work it out. Anyone has any suggestions?
Thanks in advance!

I have moved your thread from Certification to SOA Suite to get proper assistance.
Thanks,
Lisa

No binaries found for Verification issue in MPR Code Signing Test case

Similar Messages

Maybe you are looking for