No connection between camera and new MAC

I just bought a new computer and want to upload my photo's from my camera (D 7100) in CS6, but nothing happens at all! Yesterday on my ols MAC it just worked fine. Does anybody know what to do?

Best best is to use a usb card reader to transfer images.

Similar Messages

Novice trying to connect between office and home MACs

Advice for system novice
trying to connect between office and home MACs
Office MAC OSX 10.2.8 (also runs classic mode)
G4 Computer in the office (only mac in office all others are PC)
I need to connect home computer
IMAC OSX 10.4 Tiger. Connecting via cable modem and have router
I do not have good networking skills, i this something that is doable myself or should I call in a pro?

It's doable.
But at home you need to find the "outside" IP that the Internet sees, not the one you see on that machine.
what's my ip...
http://www.whatsmyip.org/
Then you'll need to "Forward Ports" on the home router so incoming stuff knows where to go.
Then you'll need to enable the Services you wish to use on both machines.

Connection between iPhone and desktop Mac

OK so just how connected are iPhones and desktop Macs now? I ask because I just deleted mail from my iPhone and it [seemed] as if the same mail was deleted from my iMac. And this was not mail using my iCloud addy.

Yes that is what I observed.
There have been other strange things going on with Mail on both the iPhone and the iMac so I wouldn't be at all surprised if this was one of them, but still I thought I might get a hint on this problem.

No Connection between Camera and FCE4

We have a JVC Everio GZ-HD3U, iMac, Mac OS X (10.5.3), FCE4. The camera has a firewire connection. The computer does not recognize the camera. We can download the movies using a USB and iMovie HD.

Lots of useful stuff here
http://discussions.apple.com/thread.jspa?messageID=7581570&#7581570
more in this thread
http://discussions.apple.com/thread.jspa?messageID=7444871&#7444871
Here's another way
http://discussions.apple.com/thread.jspa?threadID=1632819&tstart=1

The HDMI adapter that came with New mac mini, would fit on the connection coming from my old mini. My monitor has receptor same as the end of the adapter.

The HDMI adapter that came with New mac mini, would fit on the connection coming from my old mini. My monitor has receptor same as the end of the adapter.

I found out that I have 2 female ends, my question is where can I find the adapter with 2 male connectors? and what about power supply to monitor?

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

I can't connect my camera to my Mac tower - final cut doesn't recognize the connection.

I have a Canon AH X1 video camera which uses the older 6 pin firewire - I have a 6 pin to 9 pin adapter, but when I connect the camera and go to Capture and Log, it doesn't recognize the camera is connected. Even when I click NOW, it does nothing. My camera output settings have been set by the manual for this type of connection, HD and downgrade OFF, or something like that (don't have the camera in front of me this moment). Any ideas?
Thank you!

Thanks for the quick response! I have a smokin' Mac Tower - 2 x 2.4 GHz Quad-Core, 10GB RAM, Mac OS 10.6.7.
I am running 6 pin firewire using a 9 pin adapter. I have one internal hard drive - 999GB, formatted Mac OS Extended (Journaled) - 914G are free.
Camera Settings - Playback STD - Comp out 1080i/480i
HD Down Conversion - OFF
When I start up Final Cut Pro, it says
External A/V Unable to locate the following external devices:
Apple FireWire NTSC (720 x 480)
Your system configuration may have changed, or your deck/camera may be disconnected or turned off.
Please check your connections and click "Check Again" , or click "Continue" to set external device detection to None.
Then, when I go to Log and Capture, I get:
Unable to initialize video deck. You may still log offline clips or use Capture Now.
Beneath that, "Initializing Device Control..." stays up and frozen.
THEN, if I click OK and Capture NOW, I get a quick flash of a screen that disappears, and nothing happens.
Thanks in advance...

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Using an external hard drive to connect the camera to the Mac Book Pro

I am about three weeks away from a 9 to 4 pin firewire cable. In the meantime, I am logging and capturing from my Canon AX HI through my external hard drive. I am not super amazed at the quality of the image, it's noisy.
I am using HDV tapes, and I don't beleive the lighting should be causing the issue.
Does anyone know if using the external hard drive to connect the camera to my Mac Book Pro is compromising the quality of the image? Can I expect a beautiful strong image on a lap top?
Thanks for any help.

There is ZERO quality loss when you capture via firewire. It is a digital transfer of files...that's it. The issue you have is that you are trying to judge the quality of your image based on what you see with your computer monitors, and that is simply the LAST thing you should be doing.
And since this is HDV, the only way to monitor that is with an HD card or I/O device, and an HD monitor or TV. Like the Matrox MXO2 mini or AJA I/O Express mini and HDTV.
Shane

LG Monitor and New Mac Pro -- Colours out of Whack

I have an LG L226WT and a 20" Apple Cinema Display connected to a brand new Mac Pro.
Both monitors (in the same configuration) were running on my old PowerMac G5 before.
The Cinema Display works fine, colours are good, so is light etc.
The LG first had ghosting (severe at that) and this morning the colours are totally out of whack. Looking at some photos I had taken a week ago and colour corrected on the G5 now look like a child painted them (on the LG monitor, on the Cinemadisplay they are fine).
It's not the graphics card either. If I take a screenshot on the LG and look at it on the Cinemadisplay the colours etc. are correct, but the LG is right now pretty useless to me. I tried to calibrate it but the end result is pretty much the same, it just does not seem to want to play nice.
I don't think it is the DVI cable, as it is securely screwed in and in the same location as on the PowerMac, turning the monitor off / on seems to resolve the shadow problem but not the colour issue.
Anybody have experienced this? Any tips outside of trashing the LG and buying a new screen?

The ghosting issue is still one when I first turn the computer on. I found that I have to turn the monitor off and on and it resolves the issue.
I also found the source of my colour problem, it comes down to the LG "resetting" itself to some "automatic improvement" or whatever you want to call it, which completely messed with the tones. After I turned that "feature" off it worked well, but man, that took me three days to figure out.

My old ibook and new mac book pro

Hi, Hope someone can solve my problem. Thanks!
I had a ibook G4 which just dead already, cannot start-up, but the hard disk can be take out from my ibook and the data is still in the hard disk.
If I buy a new mac book, How can I transfer my ibook data, setting, itune account, etc. to my new mac book? but the ibook cannot start-up anymore. How can i solve it ?

Even if your old Mac cannot start up it still may work in target disk mode. (Start up holding the T key down) If it does connect it to your new Mac using a firewire cable the new Mac will then see the old one as an external disk and Apple's utility will do the job. If target disk mode will not work get an external case for the hard drive and it will become an external drive (I got mine from Macsales) Be sure you get the correct kind. A case for serial ATA case won't work. A firewire case will work fine. A USB case may not need a power supply for the drive and will be slower.

Compatibility issues between CS5.5 & new macs?

Hello all. Does anyone know if there are compatibility issues between Audition CS5.5 and new macs? Just got a 2013 MacBook Pro (OS X 10.9) and haven't been able to install my copy of CS5..5, which I've been using on an older mac for years. I've tried both the original installation disc and a download.
Thanks!
-- Tony

Depends entirely on the application. You should probably visit the
individual product forums for details.
I will tell you this. For InDesign you're not going to be happy at all.
Bob
CBH_admin <mailto:[email protected]>
Monday, January 7, 2013 3:16 PM
>
Compatibility issues between CS5.5 & CS6.0?
created by CBH_admin <http://forums.adobe.com/people/CBH_admin> in
/Creative Suites Windows/ - View the full discussion
<http://forums.adobe.com/message/4974872#4974872

Connecting between labVIEW and PLC S7-1200 using EPICS

Hello everyone,
I'm trying to connect between LabVIEW and PLC S7-1200 using EPICS. I did it using OPC and it succeeded and the communication was done, so right now i'm trying to do it using EPICS. so Can anyone help me with that?
Thanks in advance.
Ahmed

Hello,Ahmed:
Now I'm trying to conect S7-1200 to Labview by OPC server 2012, I'm newer for both PLC S7-1200 and OPC server. by the help file of NI's OPC I tested many times, but lost totally.
You mentioned that you have succeeded making the connection between them, could you please help me :
1) How to set in Simense TIA software? I can set the PLC's IP address now, that's all;
2) OPC server setting.
if there is a video, that will be great.
thanks a lot.
Delphi77.

Build the connection between Arduino and Flex 4.0 via JSON

Hi,
I try to make a connection between arduino and Flex 4.0, I included the JSON lib and also as3corelib.swc to Flex. When I run the Flex file the connection between PC to arduino is working (I can see it in SERPROXY window) and also I don't have any problems in Flex window, I added the SWF file of Flex to the list at //http://www.macromedia.com/support/documentation/tr/flashplayer/help/settings_manager04.htm l, Bu the reading result is not shows in the SWF,    I couldn't understand why !, thanks for help
here the code
package
import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
public class deneme extends Sprite
{private var magnetic:Socket=new Socket("localhost",5331);
private var magneticValue:Number=0;
private var distance:Number;
private var newText:TextField=new TextField();
private var listText:TextField=new TextField();
private var MNx:Number;
private var MNy:Number;
private var MNz:Number;
private var d:Object={"x":null, "y":null, "z":null};
public function deneme()
   socketDataHandler();
private function socketDataHandler():void
   newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
   d= JSON.decode(newText.text);
   MNx=d["x"];
   MNy=d["y"];
   MNz=d["z"];
   listText.x=10;
   listText.y=10;
   listText.width=600;
   listText.height=100;
   listText.text=newText.text;
   addChild(newText);

package
{    import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
import mx.rpc.events.ResultEvent;
    public class deneme2 extends Sprite
        private var newText:TextField=new TextField();
        private var listText:TextField=new TextField()
        private var magnetic:Socket=new Socket("localhost",5331);
        private var MNx:Number;
        private var MNy:Number;
        private var MNz:Number;
        private var d:Object={"x":null, "y":null, "z":null};
        public function deneme2()
             magnetic.addEventListener(ProgressEvent.SOCKET_DATA,getDATA);
         private function getDATA(event:ProgressEvent):void
            newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
            d= JSON.decode(newText.text);
            MNx=d["x"];
            MNy=d["y"];
            MNz=d["z"];
            listText.x=10;
            listText.y=10;
            listText.width=600;
            listText.height=100;
            listText.text="X="+String(MNx)+" Y="+String(MNy)+" Z="+String(MNz);
            addChild(listText);

Do connections between Outlook and Exchange Server continue to sync without proper DNS?

Hi there,
We were acquired by an other company that uses Office365.com, so we are moving accounts over from Intermedia, our existing provider, to your service. My question is this: If i point our MX records over to Office365, will we be able to work with the old calendar
and email items using the existing connection between Outlook and Intermedia Exchange? I understand that no new external mail will be delivered to the Intermedia accounts, but will we still have access to the existing items in the old mailbox as long as we
have the Intermedia accounts?
My plan is to receive new mail at Office365.com while taking our time to copy over old emails from the Intermedia folder to Office 365 folders.
Thanks,
Jeff

Hi,
According to your description, your accounts are moved from on-premise Exchange server to Exchange online server and you have the doubt about the availability of calendar and emails through the on-premise Exchange server.
However, since it’s related to Exchange online, to get more professional and quicker help, I recommend you post it on our Exchange online forum, as Ed said.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

No connection between camera and new MAC

Similar Messages

Maybe you are looking for