Novice trying to connect between office and home MACs

Advice for system novice
trying to connect between office and home MACs
Office MAC OSX 10.2.8 (also runs classic mode)
G4 Computer in the office (only mac in office all others are PC)
I need to connect home computer
IMAC OSX 10.4 Tiger. Connecting via cable modem and have router
I do not have good networking skills, i this something that is doable myself or should I call in a pro?

It's doable.
But at home you need to find the "outside" IP that the Internet sees, not the one you see on that machine.
what's my ip...
http://www.whatsmyip.org/
Then you'll need to "Forward Ports" on the home router so incoming stuff knows where to go.
Then you'll need to enable the Services you wish to use on both machines.

Similar Messages

  • Connection between iPhone and desktop Mac

    OK so just how connected are iPhones and desktop Macs now? I ask because I just deleted mail from my iPhone and it [seemed] as if the same mail was deleted from my iMac. And this was not mail using my iCloud addy.

    Yes that is what I observed.
    There have been other strange things going on with Mail on both the iPhone and the iMac so I wouldn't be at all surprised if this was one of them, but still I thought I might get a hint on this problem.

  • No connection between camera and new MAC

    I just bought a new computer and want to upload my photo's from my camera (D 7100) in CS6, but nothing happens at all! Yesterday on my ols MAC it just worked fine. Does anybody know what to do?

    Best best is to use a usb card reader to transfer images.

  • Connecting between labVIEW and PLC S7-1200 using EPICS

    Hello everyone,
    I'm trying to connect between LabVIEW and PLC S7-1200 using EPICS. I did it using OPC and it succeeded and the communication was done, so right now i'm trying to do it using EPICS. so Can anyone help me with that?
    Thanks in advance.
    Ahmed

    Hello,Ahmed:
    Now I'm trying to conect S7-1200 to Labview by OPC server 2012, I'm newer for both PLC S7-1200 and OPC server. by the help file of NI's OPC I tested many times, but lost totally.
    You mentioned that you have succeeded making the connection between them, could you please help me :
    1) How to set in Simense TIA software? I can set the PLC's IP address now, that's all;
    2) OPC server setting.
    if there is a video, that will be great.
    thanks a lot.
    Delphi77.

  • I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a n

    I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?

    what's your home version (click help>about) and was that just a warning so you were able to open the file?

  • HT4437 I've bought an airbook and apple tv.  I'm trying to connect the pc and my home tv.  I've installed apple tv on my tv.  What do I now have to do to be able to see my pc screen on the tv screen ?  thanks - Bob

    I've bought an airbook and apple tv.  I'm trying to connect the pc and my home tv.  I've installed apple tv on my tv.  What do I now have to do to be able to see my pc screen on the tv screen ?  thanks - Bob

    Bob,
    Just to confirm you have a macbook air right?  If so and it is mid 2011 or later running OS X 10.8 Mountain Lion or newer you can mirror it.  If home sharing is on and ATV and MBA are on same id and network you should get the airplay icon near the clock on the mac and that should mirror your screen.
    If you have an older mac or pc a third party app called airparrot can do it for you.
    Jules

  • Bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?

    bluetooth connection between iphone and ipad no longer workers after upgrade to ver 8 - any help?
    I'm trying to use the iphone as a remote with keynote, which again worked before the upgrade

    Hi russellpaton,
    Thanks for visiting Apple Support Communities.
    If your iOS devices are not communicating with each other after updating to iOS 8, the troubleshooting steps in this article can help resolve this sitation as well:
    If you can’t use a Bluetooth accessory or car kit
    Cheers,
    Jeremy

  • No connection between iPhone and computer

    I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
    Please help me.
    Sorry for the bad english.

    See Here...
    Device Not Recognised
    http://support.apple.com/kb/TS1538
    And Here
    iPhone, iPad, or iPod touch not appearing in iTunes
    iPod appears in Windows but not in iTunes
    Also, Here...
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • ABAP Proxy connection Between PI and SRM for XMLs

    Hello Experts,
    We are trying to set up ABAP proxy connection between PI 7.1 and SRM so we can send XML from SRM into PI.
    Our SRM developer is getting an SLD error (below) and seems like something is not set up right in the SLD. Could you help me out with any kind of blog/documention on setting up an ABAP proxy connection between PI and an ABAP system. Something that talks about what steps we need to take in PI and SRM.
    error ...
    *We saw the error during debugging. This error is preventing XML output
    to be sent to PI.
    BBP_BD  002     An SLD system has not been assigned to logical system
    Thanks,
    Mayur

    Thanks all for a quick reply. I also had to take following step to achieve the task.
    adding the XI system to the SRM config - SRM Server -->
    Technical basic Settings --> Define  System Landscape?  (also please
    associated documentation in that link for XI)
    Thanks,
    Mayur

  • Error while creating connection between Java and ABAP

    Experts
    I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
    1. The system ID is valid
    2. The system was retrieved.
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
    5. The host name s09f71v06.svr.bankone.net was resolved successfully.
    6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
    I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
    Please do let m eknow where do I need to check for the errros or logs for the above error message.
    Appreciate your quick help.
    Mahesh

    Check the relevant services are test are active on the Backend system through SICF trransaction.
    Also make sure that default icm services are running.See note 517484.
    More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
    Regards
    Ajay

  • Heterogeneous connection between Oracle and Postgres.

    Hi All,
    I'm trying to make an heterogeneous connection between Oracle and Postgres since few days but i still having this error : "lost RPC connection".
    First of all : I'm using Windows 7, Oracle 10g and PostgreSQL 8.4.
    I have done the following operations :
    1) Create a System DNS named "PG". (Test connection is OK)
    2) Create the file "initPG.ora" in "$ORACLE_HOME/hs/admin" :
    # This is a sample agent init file that contains the HS parameters that are
    # needed for an ODBC Agent.
    # HS init parameters
    HS_FDS_CONNECT_INFO = PG
    HS_FDS_TRACE_LEVEL = ON
    # Environment variables required for the non-Oracle system
    #set <envvar>=<value>
    3) Configure the file "listener.ora" (in "$ORACLE_HOME/NETWORK/ADMIN") :
    SID_LIST_LISTENER =
    (SID_LIST =
         (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
    (PROGRAM = extproc)
         (SID_DESC =
    (SID_NAME = PG)
    (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
    (PROGRAM = hsodbc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
         (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (ADDRESS = (PROTOCOL = TCP)(HOST = Cédric-PC)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    4) Configure the file "tnsnames.ora" (in "$ORACLE_HOME/NETWORK/ADMIN") :
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = Cédric-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    PG =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = tcp)(HOST = Cédric-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = PG)
    (HS = OK)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    5) Finally, i create my DB-Link and test it :
    CREATE DATABASE LINK "CENTRALE_POSTGRES" CONNECT TO "user_login" IDENTIFIED BY "user_password" USING 'PG';
    SELECT * FROM "dual"@CENTRALE_POSTGRES;
    I got this error :
    ORA-03135 : lost RPC connection.
    As you can see, i have activated the trace level (HS_FDS_TRACE_LEVEL = ON), but the directory "$ORACLE_HOME/NETWORK/trace" still empty.
    Any ideas ?
    Regards

    the tnsnames.ora alias PG is wrong - you need to have 2 closing brackets after the SERVICE_NAME so that HS=OK is outside of the CONNECT_DATA like:
    PG =
    <space>(DESCRIPTION =
    <space><space>(ADDRESS = (PROTOCOL = tcp)(HOST = Cédric-PC)(PORT = 1521))
    <space><space>(CONNECT_DATA =
    <space><space><space>(SERVICE_NAME = PG))
    <space><space>(HS = OK)
    <space>)
    Please be also aware HSODBC up to release 10.2 has been desupported since March 2008 and it was replaced by its follow up product DG4ODBC V11

  • How to establish the connection between crm and r/3

    Hi,
    Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
    Could any one tell me where to find adapters and plugins for this.
    Thanks in advance.
    Ajey

    Hello Ajey,
    in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
    B01: CRM Generation
    C71: CRM Connectivity
    B09: CRM Replication
    from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
    Regards
    Gregor

  • Solution for connection between BODS and WCF web service ?

    Hi,
    we have a unique requirement of connecting BODS to WCF webservice. This web service acts as a layer for connection between proprietary databases (secured) and other external systems. Queries are to be sent to this web service in order to fetch data from proprietary databases.
    In order to connect to these web services, we should also provide Address, Binding and contract whose details are already present with us.
    Example of web service address:     net.tcp://op12345:10101/sd
    I heard Adapters are the best way of connecting to the above web service, could you please provide some guidance on connecting through adapters if it is the best solution.
    Could someone suggest the best possible approach(ASAP) to bring connection between BODS and web services and to execute the above requirement.
    Please let me know in case of any more information.
    Regards
    Surya

    Hello Nir,
    I tried to import the my VS2008 + .net 3.5 as Wsdl local file to the Xcelsius 2008 but there is message unable to load url.
    I tried to import your Wsdl developed by .net:
    http://www.webservicex.net/airport.asmx?WSDL
    and it works ok.
    Can you send me or print here the service class definition and the configuration file for  http://www.webservicex.net/airport.asmx?WSDL?
    Thanks in advance,
    Sergey Osmachkin

  • Live/realtime connection between WebI and Xcelsius

    Hi,
    is it possible to have some kind of a live connection between WebI and Xcelsius for the following scenario...
    I need to have my WebI report made availabe as an Xcelsius Dashboard and when I filter a value in the dashboard it should also get filtered in the WebI report. Is this possible and if so then how?
    Pls help.
    Thanks,
    SD
    Edited by: Sebastian D'Souza on Feb 22, 2011 11:39 AM

    Hi Sebastian,
    Yes this is very possible. Of the three connection methods (QaaWS, Live Office, BI Services) I would recommend BI Services for flexibility, speed to set up, and speed for query refresh times.
    Check out this post for a step-by-step guide http://blog.davidg.com.au/2011/03/drill-down-in-xcelsius-using-bi.html
    And refer to the Webi Rich Client guide in the section "Sharing Web Intelligence content with other Web applications" for the full details of how this works.
    Hope this helps.

  • Working: moving between work and home

    I am in the process of writing my PhD thesis and I hate lugging my macbook pro home every night. What would you recommend as the optimal setup so that I can transfer data between work and home with minimal things to take back and forth? Thanks!

    blazepi13 wrote:
    I am in the process of writing my PhD thesis and I hate lugging my macbook pro home every night. What would you recommend as the optimal setup so that I can transfer data between work and home with minimal things to take back and forth?
    Do you have another Mac at home? If so, you may want to consider using Time Capsule as a Base Station and MobileMe. According to http://www.apple.com/timecapsule/wireless.html
    Access your drive over the Internet.
    Say you’re traveling and you need a file on your Time Capsule back at home. If you’re a MobileMe member using a Mac with Mac OS X Leopard or Snow Leopard, no problem. You can access all the files on your Time Capsule drive over the Internet. Simply register your Time Capsule with your MobileMe account, and its drive appears in the Finder sidebar of your Mac just like any other attached drive. It’s like having your own personal file server wherever you go.
    This sound great but this had lead me to post the following "MBP, Time Machine / Capsule as a Base Station, MobileMe, and PGP? " (http://discussions.apple.com/thread.jspa?threadID=2621954&tstart=0)
    If that question gets solved and is a route you might consider, then it would be good to be aware of "How to do a full system restore from encrypted Time Machine volume" (http://forum.pgp.com/t5/PGP-Whole-Disk-Encryption-for/How-to-do-a-full-system-re store-from-encrypted-Time-Machine/m-p/26837). This is not an immediately intuitive process, but the folks here seem to have it worked out.
    Optionally, if you did not want to bother with MobileMe, I think you can just use Time Capsule through a rather speedy Ethernet connection to your Mac at work. Addtionally, you can add additional drives to TM, if you require more data redundancy.
    I am guessing that it might be worthwhile to have multiple backups of a PhD thesis, with backups in more than one physical location. So, if this looks appealing and it actually works for your requirements, then you could likely have choice to:
    1) Just access work from other Mac via MobileMe
    2) Take TM home every night
    3) Take attached drive to TM home every night

Maybe you are looking for