No data in the unused software report
Hi,
We have Software metering enabled and many of the software metering reports return data as we would expect, for example:
Computers that have run a specific metered software program
Concurrent usage for all metered software programs
However, no matter how long we wait (SCCM 2012 has been running now for 3 months) the most important report for us always shows up blank: "Computers that have a metered program installed but have not run the program since a specified date".
The only thing I have noticed is that if I modify the report for a free text date input it appears to be expecting a US date format, but is presenting us with a UK date format (we are in the UK) when we leave the default drop down box inthe report. This
is suggesting to me that the query is expecting a US date format to report against, but has received UK dates from the clients and this is how they are stored in the DB. I can't work out how to fix this though or why the others are fine but this one
is blank, please help!
Thanks in advance!
Yes, I know this is an old post, I’m trying to clean them up, Did you figure this out, if so how?
http://www.enhansoft.com/
Similar Messages
-
iTunes. After backing iPod to computer and installing new software, what does "restore iPod" mean? Does it mean to restore all games and data to the new software or does it mean to "undo" the software update?
You can restore your iPod to "New" which will erase every thing and install fresh iOS software or you can restore to a particular backup that you have previously created. In this case, your iPod Apps & data will appear as per the backup. Note that some content is not in a backup and will need to be synced back to the iPad from the iTunes music library or from, for example, the iPhoto photo library.
-
Failed to retrieve data from the database crystal reports 2008 in SAP B1
Hello friends,
I am using Crystal report 2008 with SAP B1 PL 8.8. When I run any report, it runs correctly from Crystal Report. But whenever I try to open the same report through SAP ( Tools -> Preview External Crystal Report ), it prompts the parameters for that report and then open up the crystal report window and throws an Error message ("failed to retrieve data from the database. Details [Database Vendor Code: 156]").
Please any one suggest me the corrective solution.
Thanks in Advance,
Keyur Raval.I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
Radoslaw Blaniarz -
How do I report/analyze data from the KM activity reporting service
I have turned on the km activity reporting service and I am getting .txt files generated with the information I am looking for but now I'm looking for the best way to collect this data from all the server clusters and aggregate the data for easier data analysis. I have reviewed the 'how to analyze portal activity with the activity data collector' white paper. This leads me to believe that the only way to collect and analyze this data is to write a script that collects and analyzes the data. Is this true or is there a better way of gathering and reporting this data? Is this data stored in a table somewhere?
Hi,
the portal only offers basic monitoring capabilities. But it offers the possibility to create quite extensive logs, like km activity reporting service. What the portal writes to a DB table are the PAR statistics. The quite more extensive KM and ADC data is written to a file.
You can use SolMan to analyze the data. SolMan can gather, analze and write the data into the BI and gives you the basic report.
In the same way, you can use SolMan to gather the data and create your own BI reports. As it can be really hard to collect X logs from Y servernodes, SolMan offers an easy way to collect the different logs.
br,
Tobias -
Matching of data in the Cash Mgt Report & GLs
Hi
I have configured settings for cash management and liquidity forecast and ran the reports. However the data is being displayed with prospective effect only since the planning levels were not available at the time of earlier postings. Hence my balances as per the report and accounts do not tally.
How can I get the data retrospectively i.e. all items that were posted prior to activation of cash management/liquidity forecast to be included in the report so that the balances are matching each other ?
RegardsHi,
In GRR3 you might have seen the layout. Just execute the program, then it will generate the selection screen. Now give inputs for the program and execute again.
Once output is displayed then in the menu bar choose
Extras-->Tech.Information.
It displays a popup where in you can see programs. Just double click on the program.
Reward points if helpful.
Regards,
Ashok -
Unable to View Data in OOTB OBIEE11g Dashboards/Reports
Hi,
We have installed OBIEE 11.1.1.6.0. BIAPPS, Informatica and DAC for the implementation of Oracle Business Intelligence Application 7.9.6.3 in Windows 2008 Server.
Also completed the basic configuration of Oracle BI Repository Connections, Informatica server and Client configuration Steps and DAC configuration Steps.
When tried to view the OOTB Dashboards in OBIEE, the reports are throwing following errors. Please suggest us a resolution to make sure the OOTB Dashboards/Reports are up and running
Is there anything we need to do in the backend Database or something dealing with Full load using Informatica and DAC ?
The error shows that there is table or view missing/does not exist and do we need to dump the OOTB metadata(I am not sure) to Database so that the DB will have the tables ? If yes, please suggest me the process for achieving this ?
When tried to view the data and update the row count for a table in physical layer of the OOTB RPD, we are getting the same below message.
We just wanted to first view the data for the OOTB Dashboards/Reports and then proceed further with actual developmental activities involving the customizations and so on.
What configurations we need to re-check?
The reports are throwing following TNS Error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000)Looks like RPD connection pool is not pointing to Warehouse database.
For any connection issues
1. Copy your tnsnames.ora to {Oracle_BI1}\network\admin directory & {oracle_common}\network\admin directory (only the former is needed as that is the ORACLE_HOME)
2. Or instead of tnsnames.ora source entry, use the full expanded tnsnames as shown below
(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.66.173)(PORT = 1521))(CONNECT_DATA =(SERVER = DEDICATED)(SERVICE_NAME = orcl)))
OR
Call Interface: Default (OCI 10g/11g)
Data source Name->localhost:1521/XE -
Captivate 7 module sending the wrong interaction data to the LMS
Here's an interesting one: (I hope!)
I have a test created using Captivate 7 that is sending the wrong interaction data to the LMS (tested in Moodle and in SCORM Cloud).
The test module was based on a previous module by using File, Save As to create a copy which was then modified.
When the interaction data in the logs and reports is analysed it contains the questions and answers from that previous module. Even though the current module has totally different Qs and As (and a different number of them).
I'm starting to think that File, Save As was not a good move...
Very grateful for any pointers on this
Regards Simonthanks
Unfortunately the cmi.interactions in the log are still set to the wrong values. I wonder if I turned off reporting, republished, then turned reporting on again... mm...
Ok - that didn't work
Now I'm getting parser errors in the imsmanifest.xml file
hmmm... -
After I put in my password, the icon briefl displays then disappears. I am up to date with the latest software. I bought the 3GS 2 days agao and at that time it was no problem for me to download apps but since I updated my software I have been having this issue.
App store seems down a.t.m. (USA/Canada/Europe)
-
Not having to refresh the data in the main report but only in the subreport
Hi SAP,
I have a report that uses a stored procedure in the main report and uses regular database tables in the subreport. The data returned from the stored procedure reports information from the month-end database (a cutoff point from the previous month's numbers) while the subreport reports information from the live database. This report gets run everyday to show the changes in numbers from the live database. Obviously the numbers from the month-end database remainds static until the next month's cutoff database is created.
My problem is that everyday when I run the report, the data needs to refresh from both the stored procedure in the main report and the live database tables in the subreport. How can I leave the data returned from the stored procedure static or as is without refreshing the stored procedure returned data and just have the subreport data refresh itself? The stored procedure really puts a strain on the database and I would like to cut-out the time to process the report as well. Does anyone have any ideas?
ZackHi Zack,
Try the following under Report options.
1. Clear the check box of "Verify Stored Procedures on First Refresh" in the Main report.
2. Select the check box of "Verify on First Refresh" in the sub report.
Hope this helps. -
Can not refresh data int the report...
Application on C#.
Steps:
1. Get Report without data from the database
2. Change the dataconnections in report to the current user
3. refresh data on the report (FilePath = TempFilePath)
4. Resave report file with data
5. Automatically open CrystalReportsViewer2008 and load the report
Result
On developer machine is allright, but on the user machine data isn't refreshed. Therefore CrysrtalReportsViewer2008 can't open report. It say that check the SaveDatawithReport parameter.
In process I found that in temp directory on user pc, didn't creates some temprorary files which creates on developer PC. Why? Help me please.
Sorry for my English.There is the code of my programm
function ParseReport is refreshed the data and change dataconnections for current user
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Data.SqlClient;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.IO;
using System.Diagnostics;
using CRApp;
using Microsoft.Win32;
namespace CRApp
* u041Au043Bu0430u0441u0441 u0434u043Bu044F u0430u0432u0442u043Eu043Cu0430u0442u0438u0437u0438u0440u043Eu0432u0430u043Du043Du043Eu0433u043E u0432u0438u0437u0443u0430u043Bu044Cu043Du043Eu0433u043E u0434u043Eu0441u0442u0443u043Fu0430
* u043A u0444u0430u0439u043Bu0430u043C u0448u0430u0431u043Bu043Eu043Du043Eu0432, u0441u0433u0435u043Du0435u0440u0438u0440u043Eu0432u0430u043Du043Du044Bu0445 u0432
* u043Fu0440u043Eu0433u0440u0430u043Cu043Cu0435 Crystal Reports
public partial class Export2CR_MForm : Form
public Export2CR_MForm()
InitializeComponent();
Start();
public void Start()
LoginForm Login = new LoginForm();
DialogResult Dres = Login.ShowDialog();
if (Dres == DialogResult.OK)
if (Login.GetConStr().ToString() != "")
GetReportNamesFromDataBase(Login.GetConStr());
SetConnectionString(Login.GetConStr());
this.CenterToScreen();
Visible = true;
Login.Close();
else
Login.Close();
this.CenterToScreen();
this.OnClosed(null);
* u041Fu043Eu043Bu0443u0447u0430u0435u043C u043Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du044Bu043C u0444u0430u0439u043Bu0430u043C
TempFilePath = Path.GetTempPath();
* u041Au0440u0438u0441u0442u0430u043Bu043Eu0432u0441u043Au0438u0439 u0432u044Cu044Eu0432u0435u0440u043Eu043A
CrystalDecisions.Windows.Forms.CrystalReportViewer viewer;
* u041Fu0443u0442u044C u043A u0432u0440u0435u043Cu0435u043Du043Du043Eu0439 u043Fu0430u043Fu043Au0435
private string TempFilePath;
* u041Fu0430u0440u0430u043Cu0435u0442u0440 u0437u0430u043Fu0438u0441u0438 u0432 u0440u0435u0436u0438u043Cu0435, u0442u0430u0431u043Bu0438u0446u0435 (u0438u0442u0434...)
* u041Du0443u0436u0435u043D u0434u043Bu044F u0442u043Eu0433u043E u0447u0442u043Eu0431u044B u0432u044Bu0431u0438u0440u0430u0442u044C
* u043Eu043Fu0435u0440u0435u0434u043Bu0451u043Du043Du044Bu0439 u0434u0430u0442u0430u0441u0435u0442, u0441u043Eu043Eu0442u0432u0435u0442u0441u0442u0432u0443u044Eu0449u0438u0439 u0432u044Bu0431u0440u0430u043Du043Du043Eu0439 u0437u0430u043Fu0438u0441u0438
private int ObjectIDOfTemplate;
* u0423u0441u0442u0430u043Du043Eu0432u043Au0430 u0437u043Du0430u0447u0435u043Du0438u044F ObjectIDOfTemplate
public void SetObjectIDOfTemplate(int /*
* ObjectID u0442u043Eu0433u043E u0448u0430u0431u043Bu043Eu043Du0430,
* u043Au043Eu0442u043Eu0440u044Bu0439 u043Du0430u0434u043E u043Fu043Eu043Bu0443u0447u0438u0442u044C
EnternalObjectID)
ObjectIDOfTemplate = EnternalObjectID;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C ObjectID u0448u0430u0431u043Bu043Eu043Du0430
* u0441 u043Au043Eu0442u043Eu0440u044Bu043C u0440u0430u0431u043Eu0442u0430u043Bu0438 u0434u043Bu044F
* u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E u0432u043Du0435 u0431u0438u0431u043Bu0438u043Eu0442u0435u043Au0438
public int GetObjectIDOfTemplate()
return ObjectIDOfTemplate;
* u041Fu0443u0442u044C u043A u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
private string TemplateFilePath;
* u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u043Fu0443u0442u044C u043A
* u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
public void SetTemplateFilePath(string In)
TemplateFilePath = In;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0443u0442u044C u043A
* u0432u044Bu043Fu043Bu044Eu043Du0443u0442u043Eu043Cu0443 u0444u0430u0439u043Bu0443
public string GetTemplateFilePath()
return TemplateFilePath;
* u0424u0443u043Du043Au0446u0438u044F u043Eu0442u043Au0440u044Bu0442u0438u044F u0444u0430u0439u043Bu0430,
* u043Fu043Eu043Bu0443u0447u0435u043Du043Du043Eu0433u043E u0438u0437 u0431u0430u0437u044B u0438
* u043Fu043Eu043Bu043Eu0436u0435u043Du043Du043Eu0433u043E u0432u043E u0432u0440u0435u043Cu0435u043Du043Du0443u044E u043Fu0430u043Fu043Au0443
public int ParseReport(string FilePath)
viewer = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
CrystalDecisions.CrystalReports.Engine.ReportDocument rd =
new CrystalDecisions.CrystalReports.Engine.ReportDocument();
try
rd.Load(FilePath);
try
for (int i = 0; i < rd.DataSourceConnections.Count; i++)
rd.DataSourceConnections<i>.SetConnection(
GetConnectionString().GetServerName(),
GetConnectionString().GetDatabaseName(),
GetConnectionString().GetUserName(),
GetConnectionString().GetPassword()
for (int j = 0; j < rd.Database.Tables.Count; j++)
DataTable dataSet = new DataTable();
SqlConnection C = new SqlConnection(GetConnectionString().ToString());
string ViewName = GetDataViewName(GetConnectionString(), ParseTableName(
rd.Database.Tables[j].Name));
SqlCommand Q = new SqlCommand("select * from " + ViewName
, C);
Q.CommandType = CommandType.Text;
SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = Q;
adapter.Fill(dataSet);
rd.Database.Tables[j].SetDataSource(dataSet);
catch (Exception e)
MessageBox.Show(e.Message);
try
SetTemplateFilePath(TempFilePath + "\\" + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
rd.ReportOptions.EnableSaveDataWithReport = true;
viewer.ReportSource = rd;
viewer.RefreshReport();
rd.SaveAs(TemplateFilePath);
rd.Close();
return 0;
catch (Exception e)
MessageBox.Show(e.Message);
return -1;
catch (Exception ex)
rd.ReportOptions.EnableUseDummyData = true;
rd.ReportOptions.EnableSaveDataWithReport = true;
viewer.RefreshReport();
rd.SaveAs(TemplateFilePath);
MessageBox.Show("Error: Could not read file from disk. Original error: " + ex.Message);
return -1;
* u0420u0430u0437u0431u0438u0435u043Du0438u0435 u0438u043Cu0435u043Du0438 u0442u0430u0431u043Bu0438u0446u044B
* u0434u043Bu044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u043Du043Eu043Cu0435u0440u0430 u043Au043Bu0430u0441u0441u0430
public string ParseTableName(string TableName)
// MessageBox.Show(TableName);
int x = 0;
if (TableName.Contains("Class"))
x = TableName.LastIndexOf("s");
return TableName.Remove(0,x+1);
if(TableName.Contains("Attr"))
x = TableName.IndexOf("r");
// MessageBox.Show(x.ToString());
// MessageBox.Show(TableName.Remove(0, x+1));
return TableName.Remove(0, x+1);
* u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0444u0430u0439u043Bu0430 u0438u0437 u0431u0430u0437u044B
public int ParseReportWithDataBase()
try
string ConnectionString = GetConnectionString().ToString();
SqlConnection C = new SqlConnection(ConnectionString);
C.Open();
string SelectString = "select P119 from "+ GetDataViewName(GetConnectionString(),"24") +" where P115='";
SelectString = SelectString+FileTreeView.SelectedNode.Text.ToString()+"'";
SqlCommand Q = new SqlCommand(SelectString, C);
Q.CommandType = CommandType.Text;
SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = Q;
DataTable table = new DataTable();
adapter.Fill(table);
byte[] b = (byte[])table.Rows[0].ItemArray.GetValue(0);
FileStream fs = File.Create(TempFilePath+"\\"+FileTreeView.SelectedNode.Text.ToString()+".rpt");
fs.Write(b, 0, b.Length);
fs.Close();
C.Close();
return 0;
catch (Exception ex)
MessageBox.Show(ex.Message);
return -1;
* u0421u0442u0440u0443u043Au0442u0443u0440u0430, u043Eu043Fu0438u0441u044Bu0432u0430u044Eu0449u0430u044F u043Fu0430u0440u0430u043Cu0435u0442u0440u044B
* u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043A u0431u0430u0437u0435 u0434u0430u043Du043Du044Bu0445,
* u043Au0430u043A u0434u043Bu044F u0432u043Du0435u0448u043Du0435u0433u043E u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F
* u0442u0430u043A u0438 u0434u043Bu044F u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E
public struct ConnectionString
* u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
private string DataSource_Value;
* u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
private string InitialCatalog_Value;
* u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
private string UserID_Value;
* u041Fu0430u0440u043Eu043Bu044C
private string Password_Value;
* u041Fu0435u0440u0435u0433u0440u0443u0436u0435u043Du043Du044Bu0439 u043Au043Eu043Du0441u0442u0440u0443u043Au0442u043Eu0440
* u0434u043Bu044F u0440u0443u0447u043Du043Eu0439 u0438u043Du0438u0446u0438u0430u043Bu0438u0437u0430u0446u0438u0438
* u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F,
* u043Du0443u0436u0435u043D u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u0435u0433u043E
* u0432 u043Eu0434u0440u0443u0433u0438u0445 u0444u043Eu0440u043Cu0430u0445
public ConnectionString(string /*
* u0418u043Cu044F u0441u0435u0440u0432u0435u0440u0430 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
InDataSource_Value,
string /*
* u041Du0430u0437u0432u0430u043Du0438u0435 u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
InInitialCatalog_Value,
string /*
* u0418u043Cu044F u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
*/ InUserID_Value,
string /*
* u041Fu0430u0440u043Eu043Bu044C
*/ InPassword_Value)
DataSource_Value = InDataSource_Value;
InitialCatalog_Value = InInitialCatalog_Value;
UserID_Value = InUserID_Value;
Password_Value = InPassword_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F u0441u0435u0440u0432u0435u0440u0430
* u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
public string GetServerName()
return DataSource_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Du0430u0437u0432u0430u043Du0438u0435
* u0431u0430u0437u044B u0434u0430u043Du043Du044Bu0445
public string GetDatabaseName()
return InitialCatalog_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F
* u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
public string GetUserName()
return UserID_Value;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u043Fu0430u0440u043Eu043Bu044C
* u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
public string GetPassword()
return Password_Value;
* u041Fu0435u0440u0435u0432u043Eu0434 u0441u0442u0440u0443u043Au0442u0443u0440u044B u0432 u0442u0435u043Au0441u0442u043Eu0432u044Bu0439 u0432u0438u0434
* u0434u043Bu044F u0438u0441u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u043Du0438u044F u043Fu0440u0438 u0441u043Eu0437u0434u0430u043Du0438u0438 u043Au043Eu043Du043Du0435u043Au0442u043Eu0440u0430
public override string ToString()
return "Data Source="+DataSource_Value+";Initial Catalog="+
InitialCatalog_Value+";User ID="+UserID_Value+";Password="+
Password_Value;
* u0424u0443u043Du043Au0446u0438u044F u043Fu043Eu043Bu0443u0447u0435u043Du0438u044F u0441u0442u0440u043Eu043Au0438 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F u043Fu043E u0443u043Cu043Eu043Bu0447u0430u043Du0438u044E
* u043Du0443u0436u043Du0430 u0431u044Bu043Bu0430 u0434u043Bu044F u0442u0435u0441u0442u043Eu0432
static private string GetDefaultConnectionString()
return "Data Source=BSRV01;Initial Catalog=Prokat_Last;User ID=sa;Password=";
* u0412u043Du0443u0442u0440u0435u043Du043Du044Fu044F u0441u0442u0440u043Eu043Au0430 u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
* u043Du0435 u0434u043Eu0441u0442u0443u043Fu043Du0430 u0434u043Bu044F u0432u044Bu0437u043Eu0432u0430 u043Du0430u043Fu0440u044Fu043Cu0443u044E
private ConnectionString localConnectionString;
* u0423u0441u0442u0430u043Du043Eu0432u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
public void SetConnectionString(ConnectionString CS)
this.localConnectionString = CS;
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0441u0442u0440u043Eu043Au0443 u0432u043Du0443u0442u0440u0435u043Du043Du0435u0433u043E u043Fu043Eu0434u043Au043Bu044Eu0447u0435u043Du0438u044F
public ConnectionString GetConnectionString()
return this.localConnectionString;
* u0424u0443u043Du043Au0446u0438u044F u0443u0434u0430u043Bu0435u043Du0438u044F u0432u0440u0435u043Cu0435u043Du043Du043Eu0433u043E u0444u0430u0439u043Bu0430
* u043Fu043Eu0441u043Bu0435 u0437u0430u0432u0435u0440u0448u0435u043Du0438u044F u0432u0441u0435u0445 u043Eu043Fu0435u0440u0430u0446u0438u0439 u0441 u0448u0430u0431u043Bu043Eu043Du043Eu043C
private void MainForm_FormClosed(object sender, FormClosedEventArgs e)
if (FileTreeView.Nodes.Count!=0)
if (File.Exists(TemplateFilePath))
File.Delete(TemplateFilePath);
* u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u0434u0432u043Eu0439u043Du043Eu0433u043E u043Au043Bu0438u043Au0430
* u043Fu043E u0448u0430u0431u043Bu043Eu043Du0443 u0432 u0434u0435u0440u0435u0432u0435 u0444u0430u0439u043Bu043Eu0432
public void FileTreeView_DoubleClick(object sender, EventArgs e)
int Result = 0;
try
Result = ParseReportWithDataBase();
if (Result == 0)
Result = ParseReport(TempFilePath + FileTreeView.SelectedNode.Text.ToString() + ".rpt");
if (Result == 0)
Process.Start(TemplateFilePath);
else
MessageBox.Show("u0424u0430u0439u043B u043Du0435 u043Cu043Eu0436u0435u0442 u0431u044Bu0442u044C u043Eu0442u043Au0440u044Bu0442!");
catch (Exception ex)
MessageBox.Show(ex.Message);
* u041Fu043Eu043Bu0443u0447u0435u043Du0438u0435 u0432u0441u0435u0445 u0444u0430u0439u043Bu043Eu0432 u0441 u0440u0430u0441u0448u0438u0440u0435u043Du0438u0435u043C .rpt
* u0438u0437 u0431u0430u0437u044B u043A u043Au043Eu0442u043Eu0440u043Eu0439 u043Fu0440u0438u0441u043Eu0435u0434u0438u043Du0438u043Bu0438u0441u044C
public void GetReportNamesFromDataBase(ConnectionString CS)
try
SqlConnection C = new SqlConnection(CS.ToString());
SqlDataAdapter adapter = new SqlDataAdapter();
DataTable table = new DataTable();
table.Clear();
string sqlcom = "Select P115 from " + GetDataViewName(CS,"24") + " where P116 like '%.rpt'";
SqlCommand Q1 = new SqlCommand(sqlcom,C);
Q1.CommandType = CommandType.Text;
adapter.SelectCommand = Q1;
adapter.Fill(table);
FileTreeView.Nodes.Clear();
for (int i = 0; i < table.Rows.Count; i++)
FileTreeView.Nodes.Add(table.Rows<i>.ItemArray.GetValue(
table.Rows<i>.ItemArray.Length-1).ToString());
// MessageBox.Show(table.Rows<i>.ItemArray.GetValue(0).ToString());
C.Close();
catch (Exception ex)
MessageBox.Show(ex.Message);
* u041Fu043Eu043Bu0443u0447u0438u0442u044C u0438u043Cu044F DataView
* u0434u043Bu044F u0442u0435u043Au0443u0449u0435u0433u043E u043Fu043Eu043Bu044Cu0437u043Eu0432u0430u0442u0435u043Bu044F
private string GetDataViewName(ConnectionString CS,string ClassID)
string ViewName = "";
SqlConnection C = new SqlConnection(CS.ToString());
C.Open();
SqlCommand Q = new SqlCommand("[dbo].[_SysGetClassesInfoNew1]"/*P115 from dbo.Attr24 where P116='.rpt'*/, C);
Q.CommandType = CommandType.Text;
SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = Q;
DataTable table = new DataTable();
adapter.Fill(table);
for (int i = 0; i < table.Rows.Count; i++)
if (table.Rows<i>.ItemArray.GetValue(0).ToString() == ClassID)
ViewName = table.Rows<i>.ItemArray.GetValue(13).ToString();
// MessageBox.Show(ViewName);
C.Close();
return ViewName;
* u041Eu0431u0440u0430u0431u043Eu0442u0447u0438u043A u043Au043Bu0438u043Au0430 u043Du0430 u0432u044Bu043Fu0430u0434u0430u044Eu0449u0435u043C
* u043Cu0435u043Du044E u0432 u043Fu0443u043Du043Au0442u0435 "Delete"
private void deleteToolStripMenuItem_Click(object sender, EventArgs e)
FileTreeView.SelectedNode.Remove(); -
Could not see the data in the report
Hi,
BOXI R3.1 is intalled newly in my sytem.Through Infoview,when i refresh a new report, though data is getting into the report ,I am not able to see the data in the report plus the Header color is blue and the rest of the row colors are displaying as yellow.
when I am logging in another machine i am able to see the data.Please help me in solving this issue.
Thanks in Advance.
Regards,
Spandana.Spandana,
As suggested, JVM is problem. You can find out it at Control Panel == Java (Double-click) General tab == About button (See the build version) (build 1.6.0_20-b02). So you have to choose below 20 (I prefer 17).
Alternatively, You might have several Java's running on your machine. Uninstall all Java versions and start developing reports or Editing any existing reports, now BO will prompt for you to install JVM, Run it, Now the problem is solved.
Hope it should solves the issue.
If you want to see the data:(now with yellow & blue)
Select Column == properties == Read cell content as, change it to HTML.
Thank You!!
Sent from iPhone -
hi,
I have the following data in the table
Account_Num Payment_type
TEST0001 Credit Card
TEST0001 Auto Debit
TEST0001 EFT
TEST0001 Credit Card
TEST0001 Cash
TEST0001 Auto Debit
ACC00000016 Credit Card
ACC00000016 Auto Debit
ACC00000016 EFT
ACC00000016 Credit Card
ACC00000016 Cash
ACC00000016 Auto Debit
ACC00000017 EFT
ACC00000017 Credit Card
ACC00000017 Auto Debit
ACC00000017 EFT
ACC00000017 Credit Card
ACC00000017 Cash
ACC00000017 Auto Debit
in the report data look like,
accountno cash eft autodebit credit
ACC00000017 1 2 2 2
ACC00000016 1 1 2 2
TEST0001 1 1 2 2
for each accountnum how many payments has been occured their count.
please can provide solution,appreciate u r solution.
thanks
sekharHi,
Here is a solution which you can use without any updates in the universe.
You can run a query with or without retrieving duplicate rows. In this case you want to retrieve duplicate rows.
The initial table BO will show are the unique combinations of Account_Num and Payment_type.
Add an additional column to that table and in that column put:
=RowIndex()
Now you have all the rows retrieved. Put a break on Account_Num and on Payment_type.
In the footer of the column with RowIndex put a count on the RowIndex.
Next define this count as a variable and evaluate the formula in its context.
Now create a crosstab with the Account_Num in the rows, Payment_type in the columns and the just created variable in the block.
This should give you the required result.
Good luck,
Harry -
Data of the Report Painter report
Dear ALL,
I have the Report Painter report. When I'm executing this report I can save the data into the extract.
Could you tell me where are these data in the system(table?)? I want use these data for SAP script form.
Best regards,
IgorPlease go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
regards
vinod -
Not able to see the data in the report
Hi All
In my cube i am having data.But when i am running the report ,i am not able to see the data.
The error its throwing is -No Applicable data found.
what could be the problem,please provide me the idea to solve the problem.
Thanks®ards
syam prasad dasariHI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks -
Not getting data in the report.
Hi BW Experts,
I have Changed the display attribute to Navigational attribute for 0BP_FSTNAME of 0BPARTNER.I have switched on in the Cube as Navigational Attribute.I have checked the table /BI0/SBPARTNER and it contains the data. In Query Designer, i can the 0BP_FSTNAME as seperate Characteristic.When i execute the query, # Values are displaying in the report.
I have loaded the master data again for 0BPARTNER_ATTR.
I have tried to laod Attribute Change run, but 0BP_FSTNAME is not displayed in the list.
But still i couldnt able to see the data in the report.
Can u pls help on this issue.
Thanks,
Jelina.Hi,
Do one thing.
See what all records you get in the cube for the selections which you have given on the report.Give the same selection in the cubes and pick some records for you analysis.
pick the value of BPARTNER from all those records.
Now check the table /BI0/PBPARTNER and check inside that if it stores values for 0BP_FSTNAME or not for the same value of BPARTNER in the cube.
If it stores then try to activate the master data again and see if it shows up in the report.
If not then it will show up in blank.
use the transaction LISTCUBE to see all the values in the inforpovider and give the same selections and restrcitions here which you have given in the report.
Also if this query is based on a multiprovider...then you need to give proper identification...that is the this char should be identified from all the underlying cubes.
Thanks
Ajeet
Maybe you are looking for
-
I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand th
-
Can you choose which folder an app gets installed to?
When I install a new app it just goes to the main page then I have move it to a certain folder. Is there a way to have it ask where you want to install it instead of having to organize it after the fact?
-
Imac crashed and will not boot up
So my iMac crashed and will not boot. The power will come on and when it switches to the boot sequence it powers off. I bought Black Tie protection at Best Buy but when I took it to them they shipped it to Apple. The problem was never fixed. Apple s
-
Strange vertical bar in address bar blinking near cursor
After I updated my Firefox to version 33, I noticed that there is strange grey vertical bar keep blinking near cursor in the address bar and sometime it appear near close tab button. How to fix that problem? Sorry for my bad english.
-
Dear Friends, I have a requirement where i create a quantity contract with Agent and create a release order for sold to party with reference to Quantity contract i.e while creating sales order i enter the sold to party first which is different from