No display of error message log in dialog box

Dear MM Experts,
During enter incoming invoice (MIRO), when we click simulate after entering all necessary data, all error & warning messages are displayed in a dialog box if there is red traffic light. In our case despite red traffic light error messages are not displayed as shown in below screen shot. Only warning messages are displayed & document canu2019t be posted. Please let me know if anyone has encountered such behavior & knows the solution. We just want to see the error messages in dialog boxes so that necessary data can be entered and document can be posted.
Additional information: 1. No GR needs to be done, 2. GR based IV is unchecked in PO, 3. No validation is active for the company code,
Thanks & regards,
Avinash

Hi,
Thanks for your response.
Our problem is not to post a particular invoice doument, the main problem is that error log is not displayed in MIRO. For example if balance is not zero then this error should be displayed in error log dialog box, which is not happening due to which we are not able to post any invoice document as error is not known to the user. Please let me know if any suggestions.
Additional information: We have deactivated all validations & BADis. We also tried to compare with other systems where error log is displayed properly however our ABAP consultant could not find any difference. Any Input on how to compare is also welcome.
Thanks & best regards,
Avinash

Similar Messages

Error Message in a dialog box

Hi,
I have defined a error message in a raise application error type. Is there a way can we change this error type to message box becouse after entering data I lose data what is been entered on page.
becouse of this error type. Please suggest me how to change
IF wwv_flow.g_f04(vRow) IS NULL THEN
RAISE_APPLICATION_ERROR(-20000, 'Plan Start Date is null, Cannot Insert Null');
END IF;
Thanks
Sudhir

Hi Sudhir,
not sure ti work, but try with:
begin
htp.script('alert(''My message'');');
end;

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

Display Custom Error Message in OIM 11g

Hi,
I'm trying to display an error message from a validation event handler but seems that am missing something. When the "oracle.iam.platform.kernel.ValidationFailedException" is thrown from a validation handler an error message is displayed: "An error occurred". If an error code is provided (see code below) then the message looks like: "An error occurred. The corresponding error code is ERR-0001". I guess that some resource bungle with corresponding messages should be provided.
the code used:
package test;
public class UserGeneralValidationHandler implements oracle.iam.platform.kernel.spi.ValidationHandler
@Override
public void validate(long processId, long eventId, Orchestration orchestration)
throws ValidationException
String errorCode = "ERR-0001";
String message = "Simple validation message.";
ValidationFailedException ex = new ValidationFailedException(message);
ex.setProcessID(processId);
ex.setErrorCode(errorCode);
throw ex;
Q:
1.What is missing for complete solution?
2.What is the algorithm that used by OIM to find default or non default resource bundle?
3.How to change out-of-box validation messages? For a sample "The organization ABC does not exist." message is shown if non existing organization is provided during user creation and I'd like to have a different one.
Regards
Serge

rename OIMUI.jar to OIMUI.zip
find logging_en and loggin.properties.
Modify the "IAM-2050512" error message with your custom message
Find Agent and agent_en.properties.
Find Note[ERROR_SUBMITTING_REQUEST].text. Modify the message. Make sure the message must be the same with in logging.properties("IAM_2050512")
Deploy
change the OIMUI.zip to jar
replace the existing OIMUI.jar
login to weblogic and redeploy OIM (oim.ear)
no need to restart OIM server.
Test:
create a request in web console again, you must see the custom message when you hit the submit button
hope this helps.
-rad

In which tables are batch input error messages logged?

does anybody know in which table are the batch input error messages logged?
I have to display the error messages which have occured during the transaction
I tried to find out, but i could see only the table BDCMSGCOLL, this table has only the Batch input message number and not the message itself?
does anybody know about the batch input error messages?

hi,
check the sample code below.
messtab is of type BDCMSGCOLL.
Call the transaction and then use T100 to get the message.
DATA: l_mstring(480).
call transaction using
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
                   MODE   ctumode
                   UPDATE cupdate
                   MESSAGES INTO messtab.
l_subrc = sy-subrc.
SKIP.
LOOP AT messtab.
    SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                              AND   arbgb = messtab-msgid
                              AND   msgnr = messtab-msgnr.
    IF sy-subrc = 0.
      l_mstring = t100-text.
      IF l_mstring CS '&1'.
        REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
      ELSE.
        REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
        REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
      ENDIF.
      CONDENSE l_mstring.
      WRITE: /4 messtab-msgtyp, l_mstring(250).
    ELSE.
      WRITE: /4 messtab.
    ENDIF.
ENDLOOP.

Displaying Custom Error Message in ALV

Hello Experts,
Usually, when an error occurs in editable ALV, the standard WD ALV functionality marks the particular error cell in red and displays the error message.
I want the same functionality for custom error messages in event ON_DATA_CHECK. I'm able to display the message, but looking for a way to mark cells as well.
Please help....

Hello friend,
I think this link will help you much more clear on the coloring of the ALV concepts.
http://help.sap.com/saphelp_smehp1/helpdata/en/5f/ec57c72a1349c8bfdda56d976e9399/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393?QuickLink=index&overridelayout=true
Thanks,
Sri Hari

Display custom error message in enhancement spots

Hi all,
Is there someone here who've encountered having the need to display custom error message in an enhancement spot? Could you help me please.. I can't find any reference from the net.
Thanks in advance
Regards,
Aris

Hi,
The error message can be only displayed in enhancement spots based on thr program flow.
You have to determine where its getting called for ex: in PBO or PAI etc.....
You have to find the right place to display the error messages . for ex: using a memory id ......

Display an error message during a few seconds

Hi!
When submitting a form, I am displaying a error message saying that the actions performed work fine. Afterwards I would like this message to disappear after a few seconds. How can I do that ?
in the function called by my action button that submit the form i have:
public void saveForm() {
// .... operations ....
context.addMessage(null,new FacesMessage("Everything is ok"));
}

Hi,
I doubt if there is anything you can do from the action method
saveForm(), however this you can do it from the client side just
put some seconds delay in onload method in javascript and
redirect to some other page.
Thanks
Ansar

ADF-BC/JSF How to display acustom error message from a backing bean

Hi all
Can anybody provide an example of how to manipulate the list of error messages from a JSF backing bean.
In my code I use a different navigation case and this directs the user to the page displaying the error message but I am sure that there must be a more elegant way.
Thanks in advance
Thanassis

Thanks Kris
I think you 've put me on the right track here, it's just that in my case what I really want to do is prevent my users from editing records not belonging to their own group. This is done via a selectOne table component and then the backing bean code tests if the value #{row.UserGroup} matches the #{bindings.LoggedOnUserGroup.inputValue}. If the values are equal then the beans returns the navigation case to the edit page. Otherwise it returns the navigation case for the "cannot edit" page.
So what I am thinking is to return null and somehow raise the right kind of exception in order to display the error in the af:messages tag.
Thanassis

Displaying an error message with a link to the error field

By default, ADF validation usually displays an alert with an error message and a link to the error field.
I have some custom validations where I finally display the error message with this:
public static void MessageError(String messageText){
    //String messageText="No se han encontrado estos datos";
    FacesMessage fm = new FacesMessage(messageText);
     * set the type of the message.
     * Valid types: error, fatal,info,warning
    fm.setSeverity(FacesMessage.SEVERITY_ERROR);
    FacesContext context = FacesContext.getCurrentInstance();
    context.addMessage(null, fm);
My customer is asking for displaying a link to the error field in this kind of error alerts as standard errors do.
Is there any way to get this ?

Can't you include this in your message?
You may want to check Duncan's blog https://blogs.oracle.com/groundside/entry/get_more_from_your_messages whichgives more inside on what you can do
Timo

Displaying error message in a dilog box.

Hello experts.
I'm trying to display an error message with the following statements. It displays the error message but not the variable pa_taxno.
I want my goes back to the parameter field after displaying the error message. User shouldn't pass through the next field until the condition satisfied.
Thanks in advance.
if x = 1.
"do some thing.
else
MESSAGE e003(zbc400) WITH pa_taxno
endif

Can you post your entire code here?
Is this on a selection screen?
If you want a pop up display, you will have to call one of the POPUPWITH* function modules, you can find the details in SE37.
If this is on selection screen, I am assuming that you are implementing AT SELECTION SCREEN event.
Regards,
Ravi
Note - Please mark all the helpful answers

ITunes displays -48 error message when syncing iPod Nano on Windows XP

My girlfriend's mom's iPod Nano ran out of charge while jogging so she decided to charge it on her daughter's iHome. The next day she went to use her iPod but it was totally empty of all music and files. When she tried to sync it to iTunes, she received an eror message stating, "An unknown error has occurred (-48)" from iTunes and a Windows message stating that some iPod folder/file was corrupted.
If anyone receives such a message, I was able to correct it by:
-Plugging in your iPod to your PC
-Ignore the error messages
-Go to My Computer
-Find your iPod's drive letter (ie. G:)
-Right-click on it and select Properties
-Go to Tools Tab >Error-checking and select Check Now
You should be able to sync your iPod as before. I do not claim to be an expert so be warned that it may not work for you. Good luck!

Hey ermides,
Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
http://support.apple.com/en-us/ts1539
Thanks,
Matt M.

ITunes displays -50 error message when syncing iPod on windows 7

I am trying to sync my ipod and appears this error
iTunes displays -50 error message when syncing iPod

Hey ermides,
Thanks for the question. The following resource provides information if you are receiving a -50 error message when syncing:
iTunes displays -50 error message when syncing iPod on Windows XP - Apple Support
http://support.apple.com/en-us/ts1539
Thanks,
Matt M.

Display an error message in Portal during creation of Object Link

Hi,
I have a requirement where I need to throw an error message in Portal during creation of Object Link.
The requirement is whenever the user clicks on Item and try to create a Object Link for Material-Plant combination, if the Mat-Plant combination exist, than I have to throw/display an error message.
I tried for some enhancements in BAPI_BUS2172 but it does not work out.
Please help.
Thanks in advance.
Arbind

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

How to display an error message after validation in Formatted Search?

Hi SBO experts,
if an error is detected on validation in a Formatted Search, how to display an error message to the user entering the data?
Thanks & Regards,
Raghu Iyer

i created a formatted search query & attached it to the field 'Quantity' at Line Item level in Sales Order screen. just for testing purpose, i eneterd the following code lines in the query validating 'Quantity'
if $[$38.11.0] > 50
begin
select @error = 1
select @error_message = 'Vendor code cannot begin to X sign.'
end
the system throws the error : Internal error (8180) occurred [Message 131-183]
actually, i need to display an error message to the user if Quantity is not in multiples of the OITM.SalFactor2
if $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0]) > 0
begin
select @error = 1
select @error_message = 'Error in Quantity.'
end
but, this expression to get the remainder itself seems to have some error
$[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0])
i guess, % operator is used for modulo (to find the remainder of one number divided by another.) ? am i right ?
Regards,
Raghu Iyer

No display of error message log in dialog box

Similar Messages

Maybe you are looking for