No effect after change logic in java soucre file

I had change some logic inside the oracle.apps.inv.transaction.server.LotTrxManager and put it into the correct path. I did restart the Apache server but it seems that the logic I put in (debug message) did not work. Other then the Apache server, what other server I need to restart, so that the java source will be reloaded again?
Regards
Lawrence

Lawrence,
You seem to be modifying standard code which is not recommended (and decompiling and recompiling doesn't retrieve correct class file). Since you are putting a debug message, it might be the case that you are trying to understand the working of the code.
Coming to the question, in 11i only Apache bounce is enough. But you need to be sure on which server are you putting the code (in a multi node server). You can also check if the debug message you want to appear, is bound by some conditions and they are being met. Last resort, rename the standard file on server and bounce server. This should give error as class would not be found.Then copy the entire fresh file from your machine and then bounce server.
Regards
Sumit

Similar Messages

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

How's your Mid 2010 MacBook Pro doing after changing logic board due to BSoD?

After this very long discussion:
https://discussions.apple.com/message/15665312#15665312
In which a lot of people had BSoD problems after upgrading to Lion, and then have solved the issue by having the logic board replaced, I'd like to ask, specially for those who have done it earlier, a few months ago or so: did you have any problem with your 2010 MacBook Pro 15" since then?
I'd like to know it because, by reading that thread, I have reasons to believe that the problem may arise again after some time.
I had the same issue with my MBP, but I'm still on Snow Leopard. I had the logic board replaced more than once (actually 3 times), and everything is ok since then.
Now I've been pushed to upgrade to Lion so that I can continue using iCloud. So i'd like to know what are my chances of going into that nightmare again.
Any info will be appreciated.

Greetings,
I've never heard of this issue - I have two MBP Mid 2010, and both are running Lion with all updates, and there are no issues of any kind. One of the graphic shops I work with has 15 Mid 2010 MBP, all running Lion, and there are no isues with them.
We use a lot of high end software, but no games, of course, just business and graphics apps. There have been no issues with Mail, Calendars, Addressbooks, etc, except for wanting a few more features, here and there,
which we will get in time.
Bad apps are the usual culprit, when there are problems with Macs, and they are not always easy to locate, so I just reload from scratch, and thet will usualy fix a lot of ills, if the normal troubleshooting tools don't resolve the problem. Fortunately we have had very very few issues with our Macs going back to the late 90s, and earlier - they just work, and work.
Try a reload if you have troubles.
Cheers,
M.

Side effect of SQl server upgrade from 2008 R2 to Server 2012, logical name of log file changed for one database

I came to know that name has changed when I tried to shrink the file. Here is the error message I got:
Shrink failed for LogFile "Tfs_TESTTFS_Log'. (Microsoft.SqlServer.Smo)
Additonal information
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.COnnectionInfo)
Could not locate file 'Tfs_TESTTFS_Log' for database 'Tfs_TESTTFS' in sys.database_files. The file
either does not exist, or was dropped. (Microsoft Sql Server, Error: 8995)
This is test environment upgrade and I checked on production environment which is still on SQL 2008R2, shrink works fine.
Please help.

I did in place Upgrade.
Before Upgrade
Logical Names
Database Name: Tfs_TESTTFS
Database Log: Tfs_TESTTFS_Log
After Upgrade
Logical Names
Database Name: Tfs_TESTTFS
Database Log: TfsVersionControl_Log
Thx

Change logical system names after system copy

Hi!
We successfully installed SAP ECC 6.0 system as system copy.
All the logical system names of old system have been copied to new system.
Question
What is the approach to change the logical system names for new SAP system?
a) just via tcode SCC4
b) via BDLS
c) other tcodes, reports
Thank you very much!
regards
Jürgen

Hi,
Go though the system copy guide.
http://service.sap.com/instguides
After system copy,
If you need to change logical system names in the system that results from the copy, change the logical system names as described in SAP Notes 103228 and 544509.
https://service.sap.com/sap/support/notes/103228
https://service.sap.com/sap/support/notes/544509
Before running BDLS to change the logical system name, you have to define the correct logical system name in the new copied system. in tcode BD54.
- while running BDLS, execute in background.
Regards,
Debasis.

I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edi

I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edit the file, but when i open AE, it still the old same keys.
How to have this working? And why until now, we don't have a GUI for shortcuts?
I use the Apple Wireless Keyboard, and need to change the preview keys to a suitable ones, because this keyboard don't have the num pad.
Until CS6, i was using ? and Shift+?, in the place of some kind of Zoom.
But this time, i edit the file, in a sort of way i tried, and non of then change at all.
WE NEED A GUI in AE Preferences to CHANGE THE SHORTCUTS!
Thank You!

The best way to add a +1 would be for everyone to file a feature request. Those are officially tracked by Adobe (unlike this user-to-user forum) and the more people that ask for something, the more likely it is to be implemented.

Pricing changes are effective after 1 day

Hi gurus,
we are in the following scenario: CRM 2007 and ECC 5.0.
Creating a new condition record in ECC it is immediately downloaded in CRM system but do not take effect in example during sales transaction processing.
The day after the creation it magically works.
We have also tried stopping and restarting the virtual machine but it didn't work.
I think there is a buffer that records changes but we have not idea on how to make the changes immediately effective.
Points for helpfull answers.
Thanks in advance and best regards,
Fabrizio

Hi Fabrizio,
Scenario for Pricing takes Place as Such
You have maintained Pricing in ECC System and downloaded the same in SAP CRM system,
Now the Prices appear in SAP CRM system and are present with the Latest value in Pricing Tables in SAP CRM System.
Now the updated Prices donot appear in the Order,,Reason is the Virtual Machine Container has got all the Values of Prices for the Articles..Immediately after Changing the Prices in ECC the Changes appear in SAP CRM Tables but are not updated in the VM Container..when the VM Container Resets at Night automatically it reloads all the Prices from the Tables and your Changes reflect in the Order during the next day..
If you wish to Highlight the Changes immediately you may Reset the VM Container Manually and the Changed Prices shall reflect in the Order.
Links for Further Detailed Description about VM:
http://help.sap.com/saphelp_crm50/helpdata/en/a1/854ab9451048539e9131f19d3f9ab8/frameset.htm
http://help.sap.com/saphelp_crm50/helpdata/en/a9/26ae3c95164695accbf2483a14281e/frameset.htm
Hope it Answered your Queries.....
Revert Back for Further Doubts..
Thanks and Regards,
RK.

HT4528 i wont know i change logic board after button not working

i change logic board after button not working

If you opened the phone, you've rendered your phone unsupportable. The iPhone is not user servicable and Apple does not sell iPhone parts.

How can I build EJB archive after changing java files?

hello,
I changed java beans file, and tried to build jar file again, then the "build EJB archive" context menu is disabled so I can not make EJB jar file!
So frustrated.. NWDS recognizes the changes in the java files , right? How come there 's no Build menu..
Is there any pre-requisite to enable the menu?
I have no idea how I can build jar file..
Please give me a advice.. Thanks~!

I think that in order to create a RPM, you'd need to
use some C.Nope - the RPM is all about packaging and the "magic" x.spec file. You can have anything you want in the RPM, but you have to use RPM tools to build the .rpm file. One of the features is that you can also indicate (via "install" scripts) modifications to other files or the filesystem to support the installation of whatever's in the RPM.

How to re-validate an import after changing some mappings?

I imported a delimited text file into FDM. The import was successful.
I then validated the import with the existing mappings. The validation was successful.
I then exported the data to the target system (Essbase). The export was successful.
I later found out that some of the mappings needed to be changed. For instance, instead of mapping A to X, I needed to map A to Y (both X and Y are valid targets).
I thought after changing the mappings I would be able to go back to the workflow and just repeat the Validate step with the updated mappings, followed by the Export step (with the Replace option). What I found, however, is that none of the output records changed when I re-validated the import. The original mapping results were still in the output. It appears that re-validating didn't do anything at all. I had to repeat the entire workflow, starting over from importing the data, to get the updated mappings onto the output records.
Is this the correct and expected behavior? (I'm using FDM 11.1.1.2.). Shouldn't I be able to make mapping corrections and have them take effect without having to re-import all of the source data?+
I'm guessing there may be a logical reason for this behavior having something to do with archiving and/or auditing, since I successfully exported the data with the original mappings to the target system, but can anyone say for sure whether this is the way it's supposed to work and explain why?
Thanks very much.

Hi,
If I Understand your issue correctly, You want to change some of the existing mappings and want to load the file again.
I assume that the maps for that location is not derived from any other location. In the locations, the Parent location should be None, If not, You need to change the maps of the location metioned in the Parent location.
Then update the grid and Please follow the workflow, It should reflect the changes you have done for the mappings.
Regards,
tvmk
Edited by: tvmk on Mar 24, 2010 10:52 AM
Edited by: tvmk on Mar 24, 2010 11:03 AM
Edited by: tvmk on Mar 24, 2010 6:16 PM

Error after changing password in Discoverer Viewer (11.1.1.4)

I (and all other users) get the below error after changing the password used to login to Discoverer Viewer...
Weblogic Version 10.3.4
Discoverer Version 11.1.1.4
Error
The application encounters an invalid state. .
- java.rmi.RemoteException: ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1 ; nested exception is: oracle.discoiv.beans.ConnectionStoreException: ORA-6510: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1
I have already tried the following oracle note (which did not work): http://docs.oracle.com/cd/E17904_01/doc.1111/e14770/discoverer.htm#BABDJJBE
"43.1.1 Issues with Metadata Repository and Oracle Database 10g Release 1"
But we have Oracle Database 11g.
If anyone has any suggestions please advise. I have had a ticket open with Oracle Support now for a few months and they cannot reproduce.
Thanks,
Justin

We also see this same error when attempting to Create a Connection in Oracle BI Discoverer 11g. I am able to connect to a database but not able to save a connection to said database....
A connection error.
- Oracle BI Discoverer Viewer cannot save the connection. Check for other errors.
- ORA-06510: PL/SQL: unhandled user-defined exception ORA-06512: at "REP_DISCOVERER_PS.WWSSO_API_PRIVATE", line 279 ORA-01403: no data found ORA-06512: at line 1

Soa managed server is not running after changing weblogic admin password

hi guys....
we have oim 11g deployment on weblogic 10.3.5 ....it was working fine....
we changed the weblogic user password through admin console and changed the boot.properties file also....after that we succcessfully started the adminserver but soa server is not starting and giving following errors...
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
     at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
     at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy28.login(Unknown Source)
     at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
     at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
     at $Proxy46.authenticate(Unknown Source)
     at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
     at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Regards
jdev

Which boot.properties did you update Just the admin server? You need to update this file on each of the servers in the domain. Browse to the soa server directory inside the domain directory and there inside the security directory you should see the boot.properties file. You need to update the password in this file.
-Bikash

New Depreciation to start from Mar (not Jan) after change of useful life

Hi
Does anyoe has any solution or will there be changes to SAP B1's Fixed Asset?
Let me explain the full scenario as below:
1) Customer has Fixed Assest which has useful life of 25 years, i.e. 300 months.
2) The assets has been depreciated for a few months, e.g from July 2008 to Mar 2009. In FA Master Data, it shows the remaining useful life is 294.
3) From Mar 2009 onwards, the management decides that the userful life is to be 30 instead of 25. The past depreciated value is to remain. The new depreciated value is to be effective from Mar 2009 onwards.
Changes Done
1) In Fixed Asset Master file, under the General tab, a change has been made to the Useful life from 300 to 360. The remaining life is auto-change to 354.
2) Re-run the depreciation for Mar 2009.
3) The new depreciated value is re-calculated from Jan 2009 onwards and the adjustment is posted in Mar 2009.
What is required is that Jan 2009 to Feb 2009 should remain the original depreciated value. The new depreciated value should be adjusted from Mar 2009 onwards.
Please advise is there any solution or proposals.
Example
Asset value = 518749.95
Useful life = 300
Remaining Useful life = 294
Monthly Planned Depreciated Value = 1729.17, Dec Planned Depreciated value = 1729.13
After Changes Done
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Monthly Planned Depreciated Value = 1436.09, Dec Planned Depreciated value = 1436.06
Required
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Jan and Feb Planned Depreciated Value = 1729.17
Mar 2009 onwards, Planned Depreciated Value = 1404.95
Calculation = (518749.95 - 20750 - 3458.34)/352
where 20750 is the depreciated value for 2008 and 3458.34 is the depreciated value for Jan and Feb 2009.
Thanks
Siew Yuen

Hi Yatsea
Let me explain the full scenario as below:
1) Customer has Fixed Assest which has useful life of 25 years, i.e. 300 months.
2) The assets has been depreciated for a few months, e.g from July 2008 to Mar 2009. In FA Master Data, it shows the remaining useful life is 294.
3) From Mar 2009 onwards, the management decides that the userful life is to be 30 instead of 25. The past depreciated value is to remain. The new depreciated value is to be effective from Mar 2009 onwards.
Changes Done
1) In Fixed Asset Master file, under the General tab, a change has been made to the Useful life from 300 to 360. The remaining life is auto-change to 354.
2) Re-run the depreciation for Mar 2009.
3) The new depreciated value is re-calculated from Jan 2009 onwards and the adjustment is posted in Mar 2009.
What is required is that Jan 2009 to Feb 2009 should remain the original depreciated value. The new depreciated value should be adjusted from Mar 2009 onwards.
Please advise is there any solution or proposals.
Example
Asset value = 518749.95
Useful life = 300
Remaining Useful life = 294
Monthly Planned Depreciated Value = 1729.17, Dec Planned Depreciated value = 1729.13
After Changes Done
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Monthly Planned Depreciated Value = 1436.09, Dec Planned Depreciated value = 1436.06
Required
Asset value = 250000
Useful life = 360
Remaining Useful life = 354
Jan and Feb Planned Depreciated Value = 1729.17
Mar 2009 onwards, Planned Depreciated Value = 1404.95
Calculation = (518749.95 - 20750 - 3458.34)/352
where 20750 is the depreciated value for 2008 and 3458.34 is the depreciated value for Jan and Feb 2009.
Thanks
Siew Yuen

After changing deprecated methods in Thread Class

I have changed the deprecated methods suspend() and stop() with JDK1.2.2 methods wait() and thread = null respectively. I wanted to know the affects after changing when I actually run the application.

For one thing, "thread = null" won't stop the thread. In fact it will have no effect on the thread at all.

Issue with printing production order after changes through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi Shiva,
Refer SAP note 28887.
Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
Please search /google before posting queries.
Regards,
SuryaD.

No effect after change logic in java soucre file

Similar Messages

Maybe you are looking for