No entry in table  t001p

if am hiring a person and assigning wagetype  its showing a error saying  "no entry in table  t001p for personnel area xxx.
"Basic salary is not part of the pay components"  what you mean this

Hi Sheeba,
Please check the Personnel area and personnel subarea of the respective employee.
Then once you check V_t001p,and confirm personnel subarea is maintained for the respective Personnel area.
If any,let us know.
Sairam.

Similar Messages

  • No entry in table T001P for key - PT60

    Hi Folks,
    I´ve got the same error people have reported since some time in this forum, but I didn't find a clear reason or way to fix the issue.
    The error "No entry in table T001P for key" is displayed for only 1 employee during time evaluation.I've checked table T001P, IT 0001, IT 0007, and everything seems tom be OK. I have other employee in same Work Schedule and other guy with same information in IT0001, but only this guy has the issue.
    In other thread someone put "Make a blank entry in table and this fixes the issue", but it's not clear in how to do it or why this fixes the issue.
    Thanks for any help.
    (rewarded with points)

    HI,
    Check IT 2006 and IT0001. A valid record must exist in IT 0001 for the last 2006 record. Check BEGDA of IT2006 and review that is greater than BEGDA and lesser than ENDDA of any valid record in IT0001
    If this is not happening, then RPTIME program returns empty values in table T001P and this causes the "no entry in table" message.
    Regards,

  • No entry in table T001P when running time eval

    Hi,
    Can someone tell me, why this error occurs. "No entry in table T001P" when running time evaluation PT60. I checked his Infotype 1 and has the Personal Area/Subarea assigned.
    Thanks,
    Swarna.

    Hi,
    Please check these tables:
    V_001P_ALL
    V_503_AL
    Or try creating a blank entry in table T001P.
    Hope this helps,
    Reward points if helpful,
    Thank You,

  • No entry in table T001P for key when running time evaluation

    Hi There,
    All the master data is in synch and I am getting this error when
    running time evaluation.
    *No entry in table T001P for key
    Person rejected: xxxxxxxx*
    Apparantly this seems to be config error but we have lot of EEs like this, working okay. All the  master data dates are correct.
    Any comment/help is greatly appreciated.
    Thanks,
    Gajanan

    Hi,
    In one of the thread i have read that, after maintaining Contract Type the issue has been resolved.
    and in other thread he says
    "the issue is caused by a mismatch in the employee's master data dates. Particularly with infotype 8, the first record of his basic pay had a date prior to his hire date"
    Can you please check it once.
    Good Luck..!
    KK

  • Question about table T001P - in HR master data

    Hello,
    I am making a test to create a TRIP (travel expenses).
    I have a link between the personnel number and the User ID (Communication type 0105 0001).
    However, when entering the travel expenses via transaction TRIP I get following message:
    "No entry in table T001P for argument 79000001".
    What does it mean?
    What do I need to fill out?
    Thank you.
    Kind regards,
    Linda

    Linda :
    It looks as if the ee is currently in personnel area '7900', and personnel subarea '0001' in IT0001. However, configuration for the combination of parea/subarea 7900/0001 is not confifured yet in T001P. FYI, this configuration is to assign a number of grouping characteristics to each combination of parea/subarea for different purposes (e.g. work schedule, holiday calendar, ...).
    For 'TRIP' transaction, I think it just mainly wants to get 'molga' (country grouping) for the ee.
    Rgds.
    Edited by: Ted Dinh on Sep 19, 2008 9:24 AM

  • Error while deriving the currencyfrom table T001P for International payrol

    Dear Experts,
    when i run the payroll in simulation mode. im geting an error msg as ' error while deriving the currency from table T001P'
    I have checked all PA assignement with compnay code and country grouping (molga =99), which is correct and also i have checked all bellow tables.
    V_T510F_B
    T500W
    T500C
    Transaction code OE00
    In Trasaction code OE00, system not allowing me to give the currency (LKR - Srilankan Rupees). its giving an error msg as ' maximum of 2entries are allowed for each country in table T500c'(Its not alowing me to save it)
    I dont knw how to over come from this issue.
    I have chnaged the company code and tried but still im getting the same error while running the payroll.
    Any idea from Anyone....?
    Regards
    Dinesh.

    HI Mohan,
    Thz for your reply.i have checked all tables which u have mentioned. but currency (LKR- Srilankan Rupees) has been assigned.
    In V_CURC.. there are no 2 entires. but when i try to assign the currency in T-Code OE00. its giving an error msg " A maximum 2 entries are allowed for each country in Table T500C"
    I have tried to make one more intry in the same table and the same currency then its giving an error msg as " An entry already exist with the same key"
    V_TCURR  is currency exchnage rate...  Is it necesory?
    Thz,
    Dinesh.

  • No entry in table $ for key $ at $ T555A 110600

    Hello Experts,
    When I run the time evaluation through T-Code PT60, I am getting the following error:
    No entry in table $ for key $ at $ T555A 110600 01.01.2009
    Technical error no. 72
    01.01.2009 Processing terminated for EE 90000022.
    Kindly let me know how to resolve this?
    Thanks & Regards,
    Preshit.

    Hello
    This error usually occurs as the program is looking for an entry in table T555A for PSg 'XX' and time type 'XXXX' and does not see an entry.Consequently, an error is produced.
    PSg 'XX' (MOBDE) is due to your configuration for this employee, as found in T001P using personnel area and subarea.      Please make sure you have the entries it is looking for defined.
    Would you also please check all infotypes of this personnel number regarding their validity, especially quotas. In similar cases this error message occurred, if the IT0007 started before hire date of the employee.
    Thanks and Kind Regards
    Ramana

  • How can i  add entry in table BSP_DL_XMLSTRX2 for creating a copy of a view

    hi
    i want to copy in a CRM_UI component view the configuration of the view and want to save the copy with a
    different object type. But F4 value help only provides ( in crm_ui component workbench) me the value <DEFAULT> as for that view there is only one entry in table
    BSP_DL_XMLSTRX2 and for object type = <DEFAULT> and when i enter something different i get the error that this object type does not exist.
    (call method CL_BSP_DLC_XML_STORAGE2=>GET_EXISTENCE_FOR_VIEW
        exporting
          IV_COMPONENT       = ME->CURRENT_CONFIG_KEY-COMPONENT
          IV_VIEWNAME        = ME->CURRENT_CONFIG_KEY-VIEWNAME
        importing
          ET_CONTEXT_SEM_KEY = LT_CONTEXT
          ET_CONFIG_INFO     = LT_CONF_INFO.
    ---> result in only one line but i want to add another
    *so my questioin:
    where can i enter a new object type for a existing crm_ui view configuration

    Hello Britta,
    Its useful program to copy a view configuration.
    Best Regards,
    zafer,
    Edited by: Zafer Kuru on Dec 5, 2011 3:51 PM
    REPORT  z_copy.
    TABLES bsp_dcls_conf_semantic_key.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS     fr_comp  TYPE bsp_wd_component_name OBLIGATORY.
    PARAMETERS     fr_view  TYPE o2pageext OBLIGATORY.
    PARAMETERS     fr_role  TYPE bsp_dlc_role_key OBLIGATORY.
    PARAMETERS     fr_couse TYPE bsp_dlc_component_usage OBLIGATORY.
    PARAMETERS     fr_obty  TYPE bsp_dlc_object_type OBLIGATORY.
    PARAMETERS     fr_obsty TYPE bsp_dlc_object_sub_type OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS     to_comp  TYPE bsp_wd_component_name OBLIGATORY.
    PARAMETERS     to_view  TYPE o2pageext OBLIGATORY.
    PARAMETERS     to_role  TYPE bsp_dlc_role_key OBLIGATORY.
    PARAMETERS     to_couse TYPE bsp_dlc_component_usage OBLIGATORY.
    PARAMETERS     to_obty  TYPE bsp_dlc_object_type OBLIGATORY.
    PARAMETERS     to_obsty TYPE bsp_dlc_object_sub_type OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETERS     request   TYPE trkorr OBLIGATORY.
    PARAMETERS     d_mode    TYPE flag.
    SELECTION-SCREEN END OF BLOCK b3.
    DATA :  iv_from_component         TYPE  bsp_wd_component_name,
            iv_from_viewname          TYPE  o2pageext,
            iv_from_role_key          TYPE  bsp_dlc_role_key,
            iv_from_component_usage   TYPE  bsp_dlc_component_usage,
            iv_from_object_type       TYPE  bsp_dlc_object_type,
            iv_from_object_sub_type   TYPE  bsp_dlc_object_sub_type,
            iv_to_component           TYPE  bsp_wd_component_name,
            iv_to_viewname            TYPE  o2pageext,
            iv_to_role_key            TYPE  bsp_dlc_role_key,
            iv_to_component_usage     TYPE  bsp_dlc_component_usage,
            iv_to_object_type         TYPE  bsp_dlc_object_type,
            iv_to_object_sub_type     TYPE  bsp_dlc_object_sub_type,
            is_transport_data         TYPE  bsp_dlc_config_transport_data.
    DATA:
      ls_from_config_data   TYPE bsp_dlcs_conf_data,
      lr_from_text_rep      TYPE REF TO cl_bsp_dlc_stext_repository2,
      lr_to_text_rep        TYPE REF TO cl_bsp_dlc_stext_repository2,
      lt_from_text          TYPE bsp_dlt_stxtrep2,
      ls_from_text          TYPE bsp_dl_stxtrep2,
      lv_to_context_id      TYPE bsp_dlc_context_id,
      lv_config_data_origin TYPE bsp_dlc_config_data_origin.
    DATA lt_xmlconf TYPE TABLE OF bspc_dl_xmlstrx2.
    DATA ls_xmlconf TYPE bspc_dl_xmlstrx2.
    DATA ls_xmlconf_check TYPE bspc_dl_xmlstrx2.
    is_transport_data-request = request.
    is_transport_data-display_mode = d_mode.
    SELECT SINGLE * FROM bspc_dl_xmlstrx2 INTO ls_xmlconf_check
                                          WHERE component = fr_comp
                                            AND viewname = fr_view
                                            AND role_key = fr_role
                                            AND component_usage = fr_couse
                                            AND object_type = fr_obty
                                            AND object_sub_type = fr_obsty.
    CHECK sy-subrc EQ 0.
    TRY.
        CALL METHOD cl_bsp_dlc_xml_storage2=>get_config_data
          EXPORTING
            iv_component           = fr_comp
            iv_viewname            = fr_view
            iv_role_key            = fr_role
            iv_component_usage     = fr_couse
            iv_object_type         = fr_obty
            iv_object_sub_type     = fr_obsty
            iv_only_spec_parameter = abap_true
          IMPORTING
            es_config_data         = ls_from_config_data
            ev_config_data_origin  = lv_config_data_origin.
      CATCH cx_bsp_dlc_config_not_found.
        RAISE config_not_found.
    ENDTRY.
    lr_from_text_rep = cl_bsp_dlc_stext_repository2=>get_instance(
                                             iv_component = fr_comp
                                             iv_viewname  = fr_view
                                             iv_role_key        = fr_role
                                             iv_component_usage = fr_couse
                                             iv_object_type     = fr_obty
                                             iv_object_sub_type = fr_obsty
    CASE lv_config_data_origin.
      WHEN cl_bsp_dlc_xml_storage2=>config_data_origin_c.
        CALL METHOD lr_from_text_rep->get_texts_c_for_context_id
          EXPORTING
            iv_all_langu = 'X'
          IMPORTING
            et_text      = lt_from_text.
      WHEN cl_bsp_dlc_xml_storage2=>config_data_origin_s.
        CALL METHOD lr_from_text_rep->get_texts_s_for_context_id
          EXPORTING
            iv_all_langu = 'X'
          IMPORTING
            et_text      = lt_from_text.
    ENDCASE.
    Edited by: Zafer Kuru on Dec 5, 2011 3:54 PM

  • To delete multiple entries in table control in module pool

    Hi,
    Please help me out to know , <b>how to delete multiple entries from table control</b> when multiple lines in table control are selected.
    Regards,
    Irfan Hussain

    hai,
        you can do it inthis way.
    in the PAI event.
    loop at <table control name>
      module del_itab.
    endloop.
    in the nodule,write the folowing code.
    if <tablecontrol>-fieldname = 'X'.
    delete <tablecontrol-itab>
    endif.
    cheers

  • SRM-EBP:  How to delete multiple entries in table BBP_DOCUMENT_TAB easier?

    We are running SRM 4.0 EBP on classic scenario.  I want to delete entries in table BBP_DOCUMENT_TAB easier and faster using FM BBP_DELETE_FROM_DOCUMENT_TAB.  Is there a standard program that calls this FM so that inputting the entries will be faster?  I see only CLEAN_REQREQ_UP but does not serve the purpose.  If none, how can I develop a program to achieve this?  Please help SRM Consultants.

    Hi,
    Please check note 535765, in it there is a special report that deletes entries from this table.
    I hope this helps,
    Kind Regards,
    Lisa

  • I have to make Multiple entry at table maintanance at a time

    Hello all,
    My requirment is to enable the multple user can loginto the same table for making there entry simultaneosuly .
    i have created the table and table maintance as well. and i have created the new lock object and added the code accrdingly and i have used the custom fm which is generated in the tablemainta  function group.
    forex: table xyz
    user 1 , 2, 3, 4, 5,so on..
    table should allow all user tomake there entry at time and the entry edited one user should be disabled to other user.
    I have gone the forum i didnt found the correct one ..plz guide me ..plz find the attached code .i got this code and referredthe samein my prog ..any suggestions on the below.
    1.       Create table ZTEST_SHUKS3.
    2.       Create table maintenance generator for the table. 
    3       Create lock object EYTSS_E433SH in SE11. Give it name as EZTEST_SHUKS3. 
    4       create a report  ZREP_SHUKS3 and transaction code ZTEST_SHUKS3  to call this report. This tcode will call table  mainatance     generator of table ZTEST_SHUKS3 . 
    5  create the report as below
    6 Now open table maintenance function  group(ZTEST_SHUKS3)  in SE80.We know for table maintenance SAP automatically creates code in the function group. Now we will make some modification in that existing code to change the behavior. Open the screen you created through table maintenance and add one module. 
    screen: 0001
    double clik on screen and add one module in PBO of the screen
    loop at extract with control
    tctrl_ZTEST_SHUKS3 CURSOR NEXTLINE.
    MODULE LIST SHOW LISTE
    ADD HERE
    MODULE m_change_locking
    Check the code below to be added in the module m_change_locking. 
    MODULE m_change_locking OUTPUT.
    *Call the function module corresponding to the lock object we created
      CALL FUNCTION 'ENQUEUE_EZTEST_SHUKS3'
        EXPORTING
          matnr          = ztest_shuks3-matnr
          werks          = ztest_shuks3-werks
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
      IF sy-subrc NE 0.
    row is locked..hence gray..
        LOOP AT SCREEN.
          screen-input = 0.
          MODIFY SCREEN.
        ENDLOOP.
      ENDIF.
    ENDMODULE.                 " m_change_locking  OUTPUT 
    REPORT  zrep_shuks3.
    **Selection range for view maintenance
    DATA:
      BEGIN OF selekttab OCCURS 1.         "Selektionsbereich
            INCLUDE STRUCTURE vimsellist.
    DATA: END OF selekttab,
    **Table of inactive CUA functions for view maintenance
    BEGIN OF excl_cua_funct OCCURS 1.    "inaktive CUA-Fkt bei View-Pflege
            INCLUDE STRUCTURE vimexclfun.
    DATA: END OF excl_cua_funct.
    DATA: lt_enq_del TYPE STANDARD TABLE OF seqg3,
          lt_enq_read TYPE STANDARD TABLE OF seqg7,
          lw_enq_read TYPE seqg7,
          lw_enq_del TYPE seqg3,
          lv_subrc TYPE sy-subrc.
    *Read all the lock details in system
    CALL FUNCTION 'ENQUE_READ2'
      EXPORTING
        gclient = sy-mandt
        gname   = ' '
        guname  = '*'
      TABLES
        enq     = lt_enq_read.
    *We will search entry for table level lock for our table
    LOOP AT lt_enq_read INTO lw_enq_read
    WHERE gname EQ 'RSTABLE'
    AND   garg CS 'ZTEST_SHUKS3'.
      MOVE-CORRESPONDING lw_enq_read TO lw_enq_del.
      APPEND lw_enq_del TO lt_enq_del.
    ENDLOOP.
    *Delete table level lock entry for our table
    CALL FUNCTION 'ENQUE_DELETE'
      EXPORTING
        check_upd_requests = 1
      IMPORTING
        subrc              = lv_subrc
      TABLES
        enq                = lt_enq_del.
    *Now call the table maintenace generator.
    CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
      EXPORTING
        action               = 'U'
        view_name            = 'ZTEST_SHUKS3'
        show_selection_popup = 'X'
      TABLES
        dba_sellist          = selekttab
        excl_cua_funct       = excl_cua_funct.
    I followed the same steps but still not getting the multiple user enable .
    plz help
    regards
    Raju
    Edited by: abaprthree on Jul 22, 2009 7:54 PM

    Hi,
    I think you are looking for the report which will allow only for entries not for change. In this case, at PBO you write the code to make all the rows in display mode which have records using LOOP at SCREEN .....ENDLOOP. When you click on on NEW ENTRY button, add blank rows and put user entries. When you save,check for existing entries in the table because many users are entering the data at the same time, so check for duplicates KEY entries and UPDATE the table on SAVE button. If you will go in this way, I don't think you have to go for LOCK object. It's required only if you are going for EDIT mode.

  • I am receiveing error while creating Z table: Entry in table TAORA missing

    Hi Experts,
    I am receiving "Entry in table TAORA missing" while creating Z table.
    Please help
    Edited by: N_niki on Jun 11, 2011 9:22 AM

    Hi
    1) Check for the DB System. The Table name in  "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
    2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
    Regards
    Gopu

  • Error "No entry in table T589A for P" while creating new Infotype

    HI,
    I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
    "No entry in table T589A for P"
    Any input will be highly appreciated.
    Thank you,
    Farooq.

    Hi Farooq,
    Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
    Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
    Regards,
    Shrinivas

  • Error "No entry in table T551A" while creating set work schedule rule.

    Dear Team,
    I am getting following error while creating set work schedule rule.
    Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
    The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
    My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
    Request you to please help me out.
    Regards
    Shab.

    HI, there are 8 steps you need to do below:
    1. Group Personnel Subareas for the Daily Work Schedule
    2. Group Personnel Subareas for the Work Schedule
    3. Define Break Schedules
    4. Define Daily Work Schedules
    5. Define Period Work Schedules
    6. Define Employee Subgroup Groupings
    7. Define Groupings for the Public Holiday Calendar
    8. Set Work Schedule Rules and Work Schedules
    All of them belong to TIME MANAGEMENT. I think you miss some steps above.
    Please check it again.
    Regards!
    Minh

  • Error while deriving the currency from table T001P.

    Hi Friends,
    I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
    I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
    Could you please help me as to where this error can be corrected.
    Thanks,
    Manj

    About the incidence, the problem might be related to the links between
    personnel area, company code and currency set up (table T001P, T500P and
    T001).
    Please check the following points:
    1- Have you assigned the Personnel area to the Company code under SPRO -
    IMG -> Enterprise Structure -> Assignment -> Human Resource Management
    -> Assignment of Personnel Area to Company Code.
    2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
    Determine Currencies (Public Sector Currency Need to be maintained along
    with the other node).
    3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
    Basic Pay -> Define Hourly Rates for several decimal places. (Please
    maintain all the nodes).
    4- Maintaining the table t500c through transaction code OE00.
    Regards
    Ramana

Maybe you are looking for

  • Logical system already exists in communication component | Sys_R

    Hi What should be done if there are 2 diff systems with the same logical system name. Since the technical systems are different, i am able to create different business systems for it. But it gives errors during ID configuration.. Regards Monica

  • How to change the logon page text colour?

    Hi experts,    I need to do 4 changes in the logon screeen 1.the "user name" and "password " to "User Id" and "Pass".I have changed this in "umelogonbase.jar". 2.Change the colour of the two texts(white colour) 3.with black as background for the user

  • Transaction variant to disallow change in FB02 not working for FBL5N / FB09

    Hi SAPtechies, I have created a transaction variant to disallow change in all fields other than Text (BSEG-SGTXT), and activated it for standard transaction FB02. This works well when FI document is changed via transaction FB02, but fails when the sa

  • Hyperion EPM Architect Services not starting

    Hi All, We have installed Oracle Hyperion 11.1.1.1. We are using Sql 2005 as RDBMS. The problem that I am facing is that Hyperion EPM Architect services are not starting. For Hyperion EPM Architect - Process Manager I am getting the following error i

  • Portal servlet init() failed

    I sat Portal for s1as with remote existing s1ds (from another Identity server). Portal servlet failed when server started: CORE1116: Sun ONE Application Server 7.0 INFO: CORE3016: daemon is running as super-user INFO: CORE5076: Using [Java HotSpot(TM