No Folders for Folder Mappings when enabling AppXRay

When I enable AppXRay on an existing project it asks me to Specify Folder Mappings. The Add button brings up the New Folder Mapping dialog. The Folder field is disabled and when I click Browse the Choose Folder dialog says "No Entries Available".
This project is a "sub-project" inside of a larger projects composed of several Eclispe projects. Could this be causing Folder Mapping to show no folders available?

The problem was that the project I was trying to enable AppXRay on is a sub-project of another project in the workspace. When I opened the containing project then the Choose Folder dialog shows folders from that project. Adding them doesn't satisfy AppXRay because it knows that they are from another project.
I found two ways to deal with this:
Check out the subproject on its own instead of importing it from the containing project. This means that I have two copies of the sub-project, which isn't ideal.
A better way is to delete the containing project from the workspace, leaving the files intact. Then I can import the sub-project I'm interested in. I can manage the containing project using Europa from a different workspace.
So I've got two versions of Eclipse using two different workspaces. One manages the whole project. Workshop only deals with the sub-project, so there is the potential for a conflict. In reality this shoudn't happen since I rarely deal with the containing project.
I'm wondering, though. Is this inability to do Folder Mapping for AppXRay on a subproject of another project in the same workspace something that was done by design or is this inadvertent?

Similar Messages

  • Jabber goes offline when enabling capabilities assignment

    Hi
    Is anyone facing this issue :
    Jabber goes offline for all users when enabling capabilities assignment for a new user in CUCM ?
    to resolve this we have to go into CUPS and restart the XCP router service or authentication service for the jabber client to reconnect ...
    any suggestions \ ideas welcome.... thanks

    Hi Araf,
    We never had any similar issues to this one. By your description since all users go offline I dont think that this is Jabber issue at all. I suggest you should probably open a TAC case against CUCM to address your issue.
    Regards,
    Marko

  • Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

    Aperture 3.1.2 When exporting files to Finder is creating a folder for each file, that means export 200 files is creating 200 folders for each files. Does anyone knows how to fix this. Thanks

    No. This is NOT true. I've been battling with this for a couple hours.
    I choose Export>Versions
    choose
    Subfolder Format: Project Name
    no custom subfolder
    Name Format: Current Version Name.
    Aperture creates project folders for each image and names them Projects1, Projects2, Projects3 etc.
    To be sure, I have no project named Projects
    x
    This particular Aperture library has 16 projects. you can see in the screen grab it's created more than 30 folders
    If I uncheck the Subfolder, that is say NONE, I just get images and images and images, not in their project folders (of course, because I've said NONE, so why would it put them in project folders?)
    I just want to export the entire library and have the versions placed in folders named by the projects from which they came.... ez enough, no?

  • I want to open a folder in a separate window by clicking on it.  For some reason when I click on a folder it just replaces the one I was just in.  I want them both to be open at the same time without having to go through several steps.

    I want to open a folder in a separate window by clicking on it.  For some reason when I click on a folder it just replaces the one I was just in.  I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time. 

    Eric, thanks that works but seems like an extra added step also to do it that way.  I've got to move and organize a ton of files and I'm looking for a easy way to get this done.  I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps.  Not sure why these newer operating system seems more confusing and less user friendly than what they used to.  In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other.  Seems like I'm going through several extra steps now to do a simple task. 

  • Search by folder name? Monitor folders for changes?

    Im a long time PC user that LOVED how Picasa automatically indexed any locations that I told it to keep track of. I just got Aperture - but so far I am utterly disappointed in the search function.
    When I used to import all of my photos the folder that each import would go under would be the events title.
    For instance if I shot a wedding I would name the folder "John Smith" because in picasa I could just search for "Smith" and it would have all of the files in that folder as results - regardless of their metadata.
    So here I am with a 2 week old Macbook that I love - but I cant find any of the photos that I want to find.
    My library has roughly 40K images - so without the ability to search by folder names it takes me forever to find the files I am looking for.
    *Surely I am an idiot and just dont know how to search by folder name - can someone enlighten me?*
    Also - is it possible for Aperture to monitor certain folders for changes - for instance if I save something to my library folder from photoshop - do I then have to import that one file I just saved? Picasa would just display it under the folder its in - is there any programs for Macs that behave like this?

    aperture can indeed search on the project title. a little harder to find in the filter dialog, but it is there.
    but again, you'll have to import your data differently than i think you did the first time.
    i'm sorry that you're not happy with Aperture doing what you want, but then again, you're upset because it doesn't work with you're old folder structure. Not every application can be expected to be designed for every possible methodology that someone used to manage their existing data. It was set up to be used more visually than your old method and if you can't take the time to organize your photos when you import them to Aperture, then you're right, it probably isn't for you.
    i would suggest you watch the tutorial on searching to see all of the additional metadata you can search by, maybe it would help in some way.... but if not, good luck with LR

  • HT1391 I've purchased several seasons of a TV show, but instead of having them in seperate folders like they were when I bought them they put them all in one folder. How can I seperate them into seperate folders again?

    I've purchased several seasons of a TV show. But in my iTunes library instead of them being in seperate folders like they were when I purchased them they were put all in the same folder. How can I seperate them again?

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • Folder disappears when you try to open certain sub-folders

    When double clicking certain sub-folders, the main folder disappears and returns to the desktop. I repaired permissions with Disk Utility and it had no effect. Also verified the disk and it was okay.
    I also am getting an "Unable to read file" message on an Excel file that I had no problem opening a couple of months ago. Don't know if this is related or not.
    iMac 2 Ghz Intel Core Duo   Mac OS X (10.4.9)  

    Hi Daniel,
    This issue is a fairly common occurrence, and reasons of the problems are variously. We can narrow the reasons down as much as possible.
    Please refer to this article, I think the methods of this article are more specific.
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx
    And try these solutions step by step. Above all, you should
     pay attention to the third solution ” Turn off the Preview Pane, Details Pane and pop ups that show information about file and desktop items”, make sure you have unchecked “Show pop-up description for folder and desktop items”.
    If you finish all of methods from this article, the problem still exists. Checking the permissions of users.
    For instance, the permission of user 1 is only read and he opens the [shared] file, the document creates a temporary file in the same directory as the original file. Thus the document gets a temporary lock file. When other users open the [shared]
    file again, they get the error message “file in use”.
    If you want to verify the reason of permission, checking the temporary file. This is a hidden file and it will be the same name as your document, but prefixed with a ~$ symbols.
    The easiest way out is to delete the temporary file, but this not a long-term solution. Checking the permissions of users is radically.
    Trying these solutions and let me know if they work. I am glad to help and forward to your reply.
    Best Regards,
    Emi

  • Some folder is empty when enabled access-based enumeration + Deduplication

    Hi Everyone,
    Background:
    Recently we migrated the file server to win2012 r2.  We have enabled dedupication and enabled access-based enumeration. 
    The data stored in D drive vm, so we just connected the D drive to the new 2012 r2 server.  Security rights all the same as before.  
    Problem:
    People reported that they can see their files and folders directly under their client folders, however some of the sub-folders are empty. when we checked from our file server, those sub-folder have files
    inside.  
    We did some test, we tried to disabled access-based enumeration, checked from user shared drive and see the files are visible again inside the folder.
    Has anyone experienced that before and can give me the solution?
    Thanks!!
    MT

    Hi,
    From the symptom it should related to Access Based Enumeration which means it is affected by NTFS permission settings. Please help list the NTFS permission settings on folders and an affect file. 
    Meanwhile you can try to create another share folder with basic NTFS permissions such as:
    Domain Admins: Full Control - This folder, subfolders and files.
    Creator Owner: Full Control - subfolders and files only.
    A testuser group: Modify (on a specific subfolder and its files).
    Everyone - Read - This folder only. 
    Then add the additional permissions which is added on your real shares to the test share one by one to see which one causes the issue. 
    If you have any feedback on our support, please send to [email protected]

  • I have a folder with 10 folders inside it, 8 of the folders will not function when I use "show view options".

    I have a Folder with 10 Folders inside it, 8 of the Folders will not function when I use "show view options", they always default back the default.  The "show view options" works on all my other Folders in my system, even on the first two of the Folder in question.  How can I correct it?  I have tried every thing I can think of, even deleting the Folders & reintalling them.  For some strange reason the "show view options" only does not work on the last 8 Folders in the Folder in question.

    Instead GarageBand recognize my keyboard and i can play normally, also, if it can help, those are the Audio and Midi Logic Preferences and the Controller Surfaces Setup with the keyboard connected :

  • I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
    https://forums.adobe.com/community/premiere_elements
    When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one.  Then save the file.  If you move the files again, you will have to relink them again.

  • TS3048 Is there a way to "calibrate" the magic mouse? I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled.

    Is there a way to "calibrate" the magic mouse? Batteries are good. I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled-flashing between the app I am in and launchpad. When right-click is enabled I have to go to the extreme upper left of mousepad to click or it is interpreted as right-click. Won't consistently "scroll". Suggestions?

    Here's some things you could try....
    Reset your computer's PRAM
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Mac OS X: Starting up in Safe Mode
    http://support.apple.com/kb/HT1455

  • I can no longer open iphoto, the icon on my desktop has changed to a grey folder and when i click on it, it shows more folders ... please help

    I cannot open iphoto, the icon on my desktop has changed to a grey file folder, and when i click it, it shows more folders.. please help

    What happens when you double click on iPhoto in the applications folder
    LN

  • Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop

    Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
    Please help

    It is a folder which I have created. Name is "SAP".
    I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
    This is happening after the Mavericks update.

  • How do I exclude a folder in the 'Root Folders for Search (csv)' field?

    Problem:
    I have a folder structure as shown below.
    A
    |-----b
    |-----c
    |-----d
    |-----more folders may be added later.
    I have three folders b,c and d under 'folder A'.More folders may be added later on.
    How can I specify all folders under 'folder A' except 'folder b' in the field 'Folders for Search (Scope = FOLDER) (csv):' ?
    Scenario:
    I need this to create a search option set for 'folder A'.But this should not be applicable to 'folder b'.How can I specify this in the 'Root Folders for Search (Scope = FOLDER) (csv):' in the option set?
    Regards,
    Nikhil Garf

    Hi Nikhil,
    sorry about that
    ya the link is
    http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm
    you can go through the properties
    Regards
    piyush
    pl rewards points if it helps.

  • When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

    I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
    Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

    So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

Maybe you are looking for