No implementing class registered for the interface (ABAP interface, request
Hi,
Proxy has been generated for the Inbound Message interface and i could see the SXMB_MONI entry in Red on the target system.
I get the error "No implementing class registered for the interface (ABAP interface, request...."
regards,
Chaitanya
Hi Chaitanya,
Try the below configuration in SXMB_ADM,if you don't have the authorisations to SXMB_MONI ask BASIS guys to do the below activities.
Go to SXMB_ADM.
Execute Integration Engine
EDIT----
> Change Global configuration data
select Role of Business System as Integration Server
Thanks,
Amar.
Similar Messages
-
Dear PI Experts,
I'm currently working on an integrated solution between TM <=> PI <=>ECC. When I trigger the Shipment creation from TM to ECC, I received an error in the SXMB_MONI of ECC.
In the XML, I figured the error that No Implementing class registered for the Interface TransportationOrderSCMExecutionRequest_In .
May I ask you advices on this issue? Is it a mapping error on ECC or PI Side?
Thanks in advance for you help and advice.
Kr,
JPHi JP,
you can also refer the below wiki and blog
Step-by-step FTP to ABAP Proxy - Process Integration - SCN Wiki
ABAP Proxy Protocols: Use Cases and Examples
regards,
Harish -
No implementing class registered for the interface
Hello,
I know that I'm not the first one posting this problem, but I can't find an appropriate solution for my problem. When I execute the FlightSeatAvailabilityCheck scenario I got the following error:
Unable to check flight availability.
Error Type: XI system error
Error Details: No implementing class registered for the interface (type ifmmessif, name FlightSeatAvailabilityQuery_Out, namespace http://sap.com/xi/XI/Demo/Agency )
I have to say that I accidently deleted the proxy but I have recreated and activated the concerning proxy (CO_SXIDAG_FSA_QUERY) and still get the error. I read in this thread: XI 3.0 Demo: Unable to check flight availability: XI System Error that it would help to create a RFC in sm59. Why do I have to do this although I'm using proxies?
And does it make a difference in which client I create and activate the proxies?
Regards
Marci tried following solution also from old messages in SDN -
Go to SXMB_ADM.
Execute Integration Engine
EDIT-> Change Global configuration data
Select the Role of Business System is Integration Server
Again started getting error-PROXY_NOT_ALLOWED_ON_IS:
Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
But again one of the messages in SDN suggests to change Global configuration data,
EDIT-> Change Global configuration data
Select the Role of Business System is Application system.
it seems it's going in loop.... -
Proxy :No implementing class registered for the interface
<b>Hi
I am executing an Out bound proxy from client 101.
when i execute the proxy, i could see the following error in moni.
error info----
No implementing class registered for the interface (type ifmmessif, name PORequest_Out, namespace http://sap.com/xi/3A4/Purchasing/proxytoRfc)
end of error info----
Any tips fro the experts??
Regards</b>chandra<b></b>Hi Chandra,
You need to activate both the classes and the interfaces.
Try to regenerate and activate once again.
http://help.sap.com/saphelp_nw2004s/helpdata/en/86/58cd3b11571962e10000000a11402f/frameset.htm
Also refer the blog mentioned by earlier post.
Hope this helps,
regards,
Moorthy -
How to search for the particular ABAP Object
Hi,
I am using the SAP 4.6C machine, I need to search for the particular ABAP Object. Plz can anyone help me in this.
Regards,
Pralhad P. TeggiYou'll get a better response if you ask a meaningful question.
If you want to scan for Business Objects (BOR) use transaction SWO1
For ABAP classes / objects use a combination of transactions SE24 / SE18 / SE19 and /or SE80
(SE 18 / SE 19 are for Badi's)
Cheers
Jimbo -
Implementation-specific documentation for the Sun/Oracle Java SE ?
Hi,
Some places in the Java SE API specification call for platform-specific documentation. For example, the specification of the method await of class java.util.concurrent.locks.Condition says:
"Implementation Considerations
The current thread is assumed to hold the lock associated with this Condition when this method is called. It is up to the implementation to determine if this is the case and if not, how to respond. Typically, an exception will be thrown (such as IllegalMonitorStateException) and the implementation must document that fact. "
So, implementation-specific documentation is expected to exist in addition to the API specification documentation. Sure, sentences beginning with "Typically..." suggest that that is what the Sun/Oracle reference implementation does, so the behavior of Sun/Oracle implementation can be guessed in many cases... yet sometimes troubling uncertainty remains.
If implementation-specific documentation for the implementation exists, please let me know.
I apologize if I chose an inappropriate forum for this question, but there seems to be no forum for discussing documentation arrangements.If you want to look at the implementation sepcific documentation, the best place to look is the source.
The reason the docuementation is written generically is because they want you to write portable code, rather than rely on the specific implementation detail of the one you are using.
Even if you don't intend to use another vendor, you might want to upgrade in the future and Java 7 or 8 many change its implementations provided it meets the specification. -
No Groups have been registered for the Advance Test
Hi,
When I run the Diagnostic Tool and select Application, then it say "No Groups have been registered for the Advance Test". Though it shows number of test available for that application for ex. 4, 15. Please help me.
Regards,One more note which should be helpful:
Note: 235307.1 - eBusiness Support Diagnostics FAQ and Troubleshooting Guide
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=235307.1 -
There are no readers registered for the sql type.
SQL Developer 4.0
I added .sql and .ldr as file types via Tools > Preferences > File Types.
When I try to open the export.sql file in SQL Developer using the "Import Data" option I get the message:
There are no readers registered for the sql type.
I can open the file with SQL Server Management Studio and see all of the insert statements that i would expect to see.
When I created the export.sql file using the Export Wizard with "Format: insert" I received a message:
"export.sql was not opened because it exceeds the maximum automatic open size."
Can this limit be changed?The import data dialog is for taking a CSV/XLS/TXT type file.
If you used the Export Wizard, you can now just run that file in the worksheet. -
There are no readers registered for the txt type - Issue importing txt file
Hello guys,
I am working on SQL developer 3.2. and Oracle database 11g. I am trying to import a txt file with only two columns and 100 rows separated with a pipe. I can import the same file if its in *.CSV or *.xls format. I right click on the table > Import table > Choose the *.txt file > and then I get a message "There are no readers registered for the txt type". Why? Where do I get the reader? I am using the same exact method and the same exact data to import using a different file format and I do not get any errors. The wizard comes up and I am ready to load. I have scoured through this forum for a solution and I could not find one. Any help is very much appreciated.
Thank you!It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.
-
Revision: 20651
Revision: 20651
Author: [email protected]
Date: 2011-03-07 12:21:11 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4.0.0_fixes.
Modified Paths:
blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validat ors.xmlThank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM -
Revision: 20650
Revision: 20650
Author: [email protected]
Date: 2011-03-07 12:20:03 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validators.xmlThank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM -
Diagnostics Test: No Groups have been registered for the Advance Test
Hi
recently I had refershed my Devlopement from production. When i used to launch the diagnostics tools. No goups were found for all modules.
It worked before.
No groups were found and messege given below was appeared.
<strong>No Groups have been registered for the Advance Test
</strong>
Could you help me out on this issue.
Do i need to set any parameters like wrapper.classpath in jserv.properties.
Thanks in Advance.
Tokala
Edited by: neosatish on Oct 29, 2008 9:53 AM
Edited by: neosatish on Oct 29, 2008 10:47 AMPlease refer to the following notes:
Note: 402987.1 - Oracle Diagnostics: No Groups have been registered for the Advance Test
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402987.1
Note: 235307.1 - E-Business Suite Diagnostic Tools FAQ and Troubleshooting Guide for Release 11i and R12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=235307.1 -
I am trying to create a web asp.net application to add a user to Azure Active Directory(ADD). I have the single Sign on working properly. AD and Application are created. When I try to add a new user to the AD via my codebehind I get AADSTS70001:
Application '-------' is not registered for the account.
I am in development so I am using locolhost as the domain. I am using Microsoft.IdentityModel.Clients.ActiveDirectory and AcquireToken. That is where the error happens.
Am I missing a setting somewhere?
Mark PerryHi Matt,
I am trying to deal with a similar error:
Correlation ID: a8e117b5-bb9e-4877-8fcb-dc087397a44b
Timestamp: 2015-02-09 17:56:49Z
AADSTS70001: Application with identifier https://xxxxxxx.accesscontrol.windows.net/ was not found in the directory 61ae352e-45c7-40a2-9a95-bd2a8288cf27
Not sure what you mean by registering the app in the tenant. If that is adding the app in the AAD tenant, then yes, I've done that. However, does the APP ID URI in the tenant need to match the URL for the app (i.e. http://localhost:xxxxx)?
Thanks,
Russell -
Having trouble registering for the Creative Cloud $14.99 a month student plan
I'm having trouble registering for the Creative Cloud $14.99 a month student plan. Once I've filled out the form and hit 'confirm' the following message comes up: "Payment System Unavailable: We're sorry. Something seems to be wrong on our end. Please try again later. If this continues to fail, please contact Customer Support." Customer support on chat transferred me to Sales on chat, and they have been unresponsive for almost 20 minutes. Any advice?
Hi Lindsey Martin,
Kindly contact our support team so that we can assist you appropriately.
Contact Customer Care
Thanks,
Atul Saini -
Bought Macbook pro July 12 Apple store in Vancouver Canada, trying to register for the free Lion upgrade online without success. It doesn't take my serial number ?
You need to request the download code from Apple
http://www.apple.com/macosx/uptodate/
Just go there and fill out the info and they will email you the code to get Lion for free.
Maybe you are looking for
-
Can anyone help with removing bonjour from my laptop so i can start again with itunes. All music gone from ipod,no idea why and itunes deleted all music from there too but won't let me uninstall bojour so cannot update itunes or even use it. Please h
-
my company is using microsoft exchange server for the mails. When ever i send my mail, having even one single attachment, whole of the mail is converted into the attachment and the reciver receive the mail in the form of attachments.
-
Why can't I use the free Adobe reader?
I just submitted a question and all this pops up. I couldn't afford the full subscription. But when the trial period ended, it won't let me open pdf documents. So I downloaded the free adobe reader. It still doesn't let me open pdf files. I have
-
Determine the number of the aprovers required to approve in NStep BADI
I am sending the workitem to 5 approvers in the BADI:BBP_WFL_APPROV_BADI. with approval index 1. And my requirement is that the workflow should be approved, if any 2 can approve from the 5 approvers. How do i determine that,Please suggest.
-
The problem with the ruler tool is that when I select another tool the former DOES not stay visible. something I need. For example, I make a measurement with the ruler tool, then select the move tool and the mesurement made dissapears from the docume