Proxy :No implementing class registered for the interface
<b>Hi
I am executing an Out bound proxy from client 101.
when i execute the proxy, i could see the following error in moni.
error info----
No implementing class registered for the interface (type ifmmessif, name PORequest_Out, namespace http://sap.com/xi/3A4/Purchasing/proxytoRfc)
end of error info----
Any tips fro the experts??
Regards</b>chandra<b></b>
Hi Chandra,
You need to activate both the classes and the interfaces.
Try to regenerate and activate once again.
http://help.sap.com/saphelp_nw2004s/helpdata/en/86/58cd3b11571962e10000000a11402f/frameset.htm
Also refer the blog mentioned by earlier post.
Hope this helps,
regards,
Moorthy
Similar Messages
-
Dear PI Experts,
I'm currently working on an integrated solution between TM <=> PI <=>ECC. When I trigger the Shipment creation from TM to ECC, I received an error in the SXMB_MONI of ECC.
In the XML, I figured the error that No Implementing class registered for the Interface TransportationOrderSCMExecutionRequest_In .
May I ask you advices on this issue? Is it a mapping error on ECC or PI Side?
Thanks in advance for you help and advice.
Kr,
JPHi JP,
you can also refer the below wiki and blog
Step-by-step FTP to ABAP Proxy - Process Integration - SCN Wiki
ABAP Proxy Protocols: Use Cases and Examples
regards,
Harish -
No implementing class registered for the interface (ABAP interface, request
Hi,
Proxy has been generated for the Inbound Message interface and i could see the SXMB_MONI entry in Red on the target system.
I get the error "No implementing class registered for the interface (ABAP interface, request...."
regards,
ChaitanyaHi Chaitanya,
Try the below configuration in SXMB_ADM,if you don't have the authorisations to SXMB_MONI ask BASIS guys to do the below activities.
Go to SXMB_ADM.
Execute Integration Engine
EDIT----
> Change Global configuration data
select Role of Business System as Integration Server
Thanks,
Amar. -
No implementing class registered for the interface
Hello,
I know that I'm not the first one posting this problem, but I can't find an appropriate solution for my problem. When I execute the FlightSeatAvailabilityCheck scenario I got the following error:
Unable to check flight availability.
Error Type: XI system error
Error Details: No implementing class registered for the interface (type ifmmessif, name FlightSeatAvailabilityQuery_Out, namespace http://sap.com/xi/XI/Demo/Agency )
I have to say that I accidently deleted the proxy but I have recreated and activated the concerning proxy (CO_SXIDAG_FSA_QUERY) and still get the error. I read in this thread: XI 3.0 Demo: Unable to check flight availability: XI System Error that it would help to create a RFC in sm59. Why do I have to do this although I'm using proxies?
And does it make a difference in which client I create and activate the proxies?
Regards
Marci tried following solution also from old messages in SDN -
Go to SXMB_ADM.
Execute Integration Engine
EDIT-> Change Global configuration data
Select the Role of Business System is Integration Server
Again started getting error-PROXY_NOT_ALLOWED_ON_IS:
Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
But again one of the messages in SDN suggests to change Global configuration data,
EDIT-> Change Global configuration data
Select the Role of Business System is Application system.
it seems it's going in loop.... -
Can I assume that Windows will be able to handle my physical interface device if I follow the "Device Class Definition for Physical Interface Devices" specification while writing the firmware?
I'm trying to develop a device which handles rumble output from applications such as games. Applications would include e.g. racing games or simulators. I'm hesitant to just clone Xbox 360 Gamepad or Sidewinder USB reports. I'd like to correctly declare my
device as something on its own while still making use of already implemented OS-specific drivers. The purpose of the mentioned specification is exactly that as far as I can tell. I wasn't able to find concrete information about its level of support though.
The "USB device class drivers included in Windows" page (sorry I'm not allowed to post links yet..) seems to link to WinUSB which I'm not sure what to do with.Thanks for your response. Well if everything was implemented at that time and it's still available it should be fine since the specification document's last version is dated 1999. I was just hoping there would be any form of documentation whether it's
supported and by which degree so I don't go through the trouble of figuring out how the firmware should be written according to the specification just to find out there is no OS driver implementation for it which would render my work more or less useless.
So I suppose I'm forced to go the trial and error path? -
I have a outlook 2007 plugin created in VS 2008 that reads calendar meetings. This plugin also works with outlook 2010. I used to debug this application from VS 2010 as well.
Last month, I installed Office 365 to test something. Later I uninstalled this version but after that my plugin application is crashing, every time a new appointment/meeting is created in calendar.
I get the below error:
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.Office.Interop.Outlook._AppointmentItem'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}'
failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)).
Tekriti SoftwareThanks for your sharing and have a nice day.
Yoyo Jiang[MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Implementation-specific documentation for the Sun/Oracle Java SE ?
Hi,
Some places in the Java SE API specification call for platform-specific documentation. For example, the specification of the method await of class java.util.concurrent.locks.Condition says:
"Implementation Considerations
The current thread is assumed to hold the lock associated with this Condition when this method is called. It is up to the implementation to determine if this is the case and if not, how to respond. Typically, an exception will be thrown (such as IllegalMonitorStateException) and the implementation must document that fact. "
So, implementation-specific documentation is expected to exist in addition to the API specification documentation. Sure, sentences beginning with "Typically..." suggest that that is what the Sun/Oracle reference implementation does, so the behavior of Sun/Oracle implementation can be guessed in many cases... yet sometimes troubling uncertainty remains.
If implementation-specific documentation for the implementation exists, please let me know.
I apologize if I chose an inappropriate forum for this question, but there seems to be no forum for discussing documentation arrangements.If you want to look at the implementation sepcific documentation, the best place to look is the source.
The reason the docuementation is written generically is because they want you to write portable code, rather than rely on the specific implementation detail of the one you are using.
Even if you don't intend to use another vendor, you might want to upgrade in the future and Java 7 or 8 many change its implementations provided it meets the specification. -
How do i query the module object for the interface of the module-specific interface I require
Hi there.
Currently using LabVIEW 2012/TestStand 2012.
I am attempting to edit the LabVIEW Text Sequence Translator, and in the CreateStep.vi I am trying to create a step that is of type WIS_Sequence_Call (a custom version of NI_Types.ini-->SequenceCall).
I need to set the file pathname, sequence name and parameter values in the step. I believe I need to get access to the SequenceCallModule class to do this.
This help file SequenceCallModule states in the description: "To access the properties and methods of a specific module class, query the Module object for the interface of the module-specific interface you want to acquire.".
What exactly is meant by "query" here? It looks like "Specify" might be what I am after, but I want this done programmatically, ie no dialog boxes.
See my snippet below.
Thanks.Thanks for the reply Charles.
I have been using the 2012 version of the poster.
I can get access to the Module class from the Step Class as shown in the snippet above, but I can't see how to get to SequenceCallModule? The "To more specific class" VI doesn't seem to work for TS refs. Is there no way to derive the SequenceCallModule from this?
Also I can use the TSAdp.SequenceCallModule reference, but I need to link this to the relevant step that I've just created. Can NI please provide me with a link to any examples on this?
Thanks -
Hi there.
Currently using LabVIEW 2012/TestStand 2012.
I am attempting to edit the LabVIEW Text Sequence Translator, and in the CreateStep.vi I am trying to create a step that is of type WIS_Sequence_Call (a custom version of NI_Types.ini-->SequenceCall).
I need to set the file pathname, sequence name and parameter values in the step. I believe I need to get access to the SequenceCallModule class to do this.
This help file SequenceCallModule states in the description: "To access the properties and methods of a specific module class, query the Module object for the interface of the module-specific interface you want to acquire.".
What exactly is meant by "query" here? It looks like "Specify" might be what I am after, but I want this done programmatically, ie no dialog boxes.
See my snippet below.
Thanks.
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au
Solved!
Go to Solution.Thanks for the reply Charles.
I have been using the 2012 version of the poster.
I can get access to the Module class from the Step Class as shown in the snippet above, but I can't see how to get to SequenceCallModule? The "To more specific class" VI doesn't seem to work for TS refs. Is there no way to derive the SequenceCallModule from this?
Also I can use the TSAdp.SequenceCallModule reference, but I need to link this to the relevant step that I've just created. Can NI please provide me with a link to any examples on this?
Thanks
Christopher Farmer
Certified LabVIEW Architect
Certified TestStand Developer
http://wiredinsoftware.com.au -
No Groups have been registered for the Advance Test
Hi,
When I run the Diagnostic Tool and select Application, then it say "No Groups have been registered for the Advance Test". Though it shows number of test available for that application for ex. 4, 15. Please help me.
Regards,One more note which should be helpful:
Note: 235307.1 - eBusiness Support Diagnostics FAQ and Troubleshooting Guide
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=235307.1 -
There are no readers registered for the sql type.
SQL Developer 4.0
I added .sql and .ldr as file types via Tools > Preferences > File Types.
When I try to open the export.sql file in SQL Developer using the "Import Data" option I get the message:
There are no readers registered for the sql type.
I can open the file with SQL Server Management Studio and see all of the insert statements that i would expect to see.
When I created the export.sql file using the Export Wizard with "Format: insert" I received a message:
"export.sql was not opened because it exceeds the maximum automatic open size."
Can this limit be changed?The import data dialog is for taking a CSV/XLS/TXT type file.
If you used the Export Wizard, you can now just run that file in the worksheet. -
There are no readers registered for the txt type - Issue importing txt file
Hello guys,
I am working on SQL developer 3.2. and Oracle database 11g. I am trying to import a txt file with only two columns and 100 rows separated with a pipe. I can import the same file if its in *.CSV or *.xls format. I right click on the table > Import table > Choose the *.txt file > and then I get a message "There are no readers registered for the txt type". Why? Where do I get the reader? I am using the same exact method and the same exact data to import using a different file format and I do not get any errors. The wizard comes up and I am ready to load. I have scoured through this forum for a solution and I could not find one. Any help is very much appreciated.
Thank you!It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.
-
Revision: 20651
Revision: 20651
Author: [email protected]
Date: 2011-03-07 12:21:11 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS 4.0.0_fixes.
Modified Paths:
blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validat ors.xmlThank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM -
Revision: 20650
Revision: 20650
Author: [email protected]
Date: 2011-03-07 12:20:03 -0800 (Mon, 07 Mar 2011)
Log Message:
Some MBean tests needed flex.management.jmx stuff in the allow classes list for the class deserialization validator so adding it in on BlazeDS trunk.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.validators.xmlThank you very much!
I cant believe this little comment has been so helpful!
But yes it is:
I explain, despite my efforts to find, googled it, forums, faqs, etc...
no where it mentionned the manifest.fm file is... INSIDE the .jar!
Your comment "a zip" made me attempt to open it with winrar, and I found a manifest.fm file inside!
So far I was editing the one at the "source" of my project and rebuilding it with netbeans.
I am going to try that now.
Actually.... :( no its mentionning my main class!
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
Created-By: 10.0-b19 (Sun Microsystems Inc.)
Main-class: courseworkjava3d.Simple3D
Class-Path:
X-COMMENT: Main-Class will be added automatically by buildWell I have no problems uploading you the .jar, it is for a coursework it is not a private project or whatever:
http://www.uploading.com/files/CM2LKWYU/BetaCourseworkJava3d_Final.jar.html
Oh and I felt on your comment "dont ask us" as if I was suppose to know... i'm a beginner, I did not know that! And I tried to give you so many infos so you dont lose your time if you want to help, especially as after my own research I found many, many results for this "main class" and I tried a few solutions!
Edited by: CupofTea on Apr 13, 2008 3:28 AM -
Hi all !
I am new to interfaces and as a functional cosultant I have to do couple of functional specs for the interfaces and also the mapping ...what should be my approach
1, let's say I have to do the mappin for the Lcokbox interface( EDI 823) .....what should I have to exactly do in here?
2. another example would be I need to grab required data from a third party tool into the credit master data on the cutomer ... how can I do this ...
Please some one explain me in detail the above two cases , so I can get a clear understanding and start from there.....
hoping couple of answers....thanks a lot in advance for anykind of helpHello
In simple words, an interface is a 3rd party software. SAP and this software exchange data in 2 way channel.In layman's words, we need a program which can download data and process and record in SAP.
Also, we need a program to send data to the external interface.
First draw the process flow / how and what data is involved. Make a visio diagram.
Let the technical guys have a look at it and decide on what business partners like XI need to be used.
Let them decide on the channels by which data can flow.
Now look at the available data in the 3rd party, study their fields and check relevance in SAP. The out come of this excercise is mapping data for smooth flow and compatability.
Now let the ABAPers sit and prepare download / upload program and and link both the systems.
The data is in the form of files, which are either manually uploaded or triggered by scheduled jobs. The interface program should facilitate both features.
Reg
assign points if useful
Maybe you are looking for
-
Hello, I am currently trying to deploy a jsp file on the application server from NWDS. But unfortunatelly I didn't manage to make it work yet. If anybody could provide a step by step howto that would be great, I am not very familiar with the deployme
-
Acrobat XI Outlook 2013 add-on crashes Outlook
Acrobat XI Outlook 2013 add-on crashes Outlook each time I try to convert an email to PDF, I did not see a relevant answer to this specific problem in the forums. Of course I can print an email to acrobat PDF but I believe a fix or an update from Ado
-
Hi, This is the scenario: An Incoming mail with a PDF attachment is received in SAPconnect (SMTP). The attachment to the mail is stored as a KPRO document. The physical and logical ids and the class (SOFFPHIO) can be obtained. The requirement is to c
-
Add-On PKG Applications Available - What Applications Do You Want (Wishlist)
Today we have multiple applications that run directly on the Smart Storage devices and can be installed via in the simple PKG process. These are wide ranging applications that help with asset management, content management, e-commerce, web publishi
-
Hi All I am planning to create the Physical standby with Hot backup .... Can anyboby give me the link/steps which explains how to do this? Thanks Gagan