No internt need 2 change settings from contract web 2 pay as u go

hi there iv just bought the blackberry curve 5200 and its seconed hand i think the phone was on contract before as iv put me contract sim in and all internet works aok but the problem is i need 2 get it working on pay as u goon o2 network iv done the diagnostic test in netwark settings and it says radio activation no signal level unknown network unknown ip address unknown icmp ping echo no blackberry registration no connected to blackberry no blackberry pin no i just cant work out what 2 do can u help me please thanks jason

Wow, long sentance there jason pretty hard to keep up with the thought process with no puncuation at all anywhere throughout there is no model device 5200 is the device unlocked who is it branded to do you have the blackberry data plan and if you do has it been provisioned to your account with o2 these are things you need to answer oh yea was the device fomerally used on a bes corporate network with an it policy on the device
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I need to change settings from pop to imap

I need to sync my email act. to be compatible with my iphone and ipad they are imap and my current thunderbird settings is pop. can this be changed and how do I do it

''moving to the Thunderbird questions queue''

I'm using a TravelSIM to make calls home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much? eg turn off push data - what else?

I'm using a TravelSIM to make calls and texts home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much?
I have advice to turn off push data and don't use Google maps
Are there other things I should do so my costs will be kept low?
thanks for any answers from experienced iPhone using travellers!
kind regards, Di

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send. How do I do this?

I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send so that people reply to my email alias not the address where my emails originate. How do I do this?

So you have added a new 'Identity' to your existing email address.
If someone sends an email using that 'other identity'
you have a choice of where those received emails can go. they can be received into the original mail account, like a collect all in the one Inbox or perhaps sent to Local Folders, so you can see them as separate. Or you can filter on that identity to put those emails in a specific folder.
When you REply to any incoming mail that has used that new identity email address, it will use the new identity in the Email address in FROM assuming the received email in the main mail account of which the new identity email is applied.
This should also now offer the added identity email address as an option in the FROM drop down list. So you can easily swap when sending an email if required.
If you want to send using your default email address to people, but want their reply to use the identity email address:
Tools > Account Settings
select the original email address mail account name
Where it says: 'Reply to addresses: enter the reply to identity email address.
click on OK
This means when they click on 'Reply' it will auto insert the Reply-to option.
This will work providing it is a 'Reply' to an email you sent which contains the Reply-to email address.
If someone is not actually replying by using the Reply-to new identity email address:
In other words they are sending you a new email using the original email address because perhaps that is the one in their address book or the one they located on a webpage etc.
Then, when you select to Reply to that email, it will use the email address to which it was sent to in the FROM field - the original email address. Hence why you would need to select the new identity FROM in the drop down list.
One way to get around this is set out below.
If you do not use an identity - instead you create another existing mail account for the 'identity' email address, so you have two mail accounts for the two email addresses.
You can move selected emails manually or perhaps using a filter to screen them from the original mail account into the newly created mail account.
Then when you click on Reply, it will use the new mail account email address instead of the original email address.

I created a calendar in the wrong calendar year. I need to change it from 2012 to 2013. Help!!!

I created a calendar in the wrong calendar year. I need to change it from 2012 to 2013. Help!!!

N000295, I am afraid you will have to start all over again. There is no way to change the year of the already created photo calender.

How to change settings from CMYK to RGB in illustrator and photoshop

Everything is in CMYK and I need to change it to RGB for my M2 dtg garment printer, because my colors on shirts are not coming out right. My rip software for printer is in RGB. When I open new file in illustrator and click advanced to change to RGB I get a little warning saying; The chosen color mode is different from the color space defined by the Document Profile. Panel content may not match the new color mode.

First choose "Basic RGB" for Profile in the New Document Dialog, then adjust any advanced settings.

I recorded 24 bit audio. need to change settings to 24 bitrate

I recorded 24 bit and it sounds terrible. I'm assuming I need to change the bitrate to 24 in FCP. How do I do that. Footage is from
Red One Camera but I'm not importing footage yet. I'm just checking the sound files and they sound terrible.

There is a lot of noise. I did another test and changed it back to 16 bit and it was fine. I played it in Quick time and it did the same thing. I was told I need to change my settings in fcp to 24

Cannot change settings from AAC to MP3 encoder although able to do so on another computer

I am frustrated as I am able to change my settings on ITunes 10 on my desktop computer, but when I downloaded ITunes10 on my notebook, I was not able to change the same settings from AAC to MP3 encoder although I clicked ok. It keeps reverting to AAC, and I am not able to rightclick my music file, as I can do on my desktop, to create a smaller mp3....
I also noticed that other checkmarks, i.e. checking "podcast" under general preferences under source revert back to unchecked when I get out.
What to do?
Thanks so much,
Anita

andreafromspringfield gardens wrote:
And what does "in the Enterprise" mean?
In a school / business / corporate environment. Used for a large deployement of iPads.
http://www.apple.com/support/ipad/enterprise/

I am not getting software alerts on my iPad 2 - why? Do I need to change settings and where can I find and how do I download ios5

I am not getting software alerts on my iPad 2 - why? Do I need to change my settings. Where do I find the latest iOS software and how do I install. Thanks!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Need to change settings on my icloud mail account

need help to change settings on my mail icloud account. is grayed out.

jplman wrote:
using 1-.8.4.
I assume that you mean 10.8.4?
Here are the current settings for Comcast email (please note recent change)
To prevent spam and to ensure the security of our network and customers, Comcast no longer supports the use of port 25 for sending email. If you use an older email client (Outlook Express, Outlook, Mac Mail, etc.), this may impact your ability to send email. To learn more about port 25, please visit our FAQ.
To configure an email client to use Comcast email (@comcast.net), the following settings should be used for sending and receiving email:
Recommended
Only If Needed
Incoming Mail Server - Name
mail.comcast.net
mail.comcast.net
Incoming Mail Server - Port Number
995 (POP3)
110 (POP3)
Outgoing Mail Server - Name
smtp.comcast.net
smtp.comcast.net
Outgoing Mail Server - Port Number
465 (SMTP)
587 (SMTP)
SSL Encryption
checked
unchecked
Authentication
Comcast ID and Password required

Change settings from windows service pack2

''duplicate - locking - https://support.mozilla.com/en-US/questions/889659''
i changed settings to run with windows service pack 2
now want to change back to windows 7 how?

Restore your iPod in iTunes for Mac. Just be aware that restoring will erase and reformat the iPod's hard drive, reload the software with the Mac version and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Advice needed for changing code within the Web IC...

Hi,
I need to change some code within the GET_QUERY_RESULT Method, which is found:
BSP->Z_CRM_IC
View->AuiSearch
Controller class ZL_CRM_IC_AuiSearch_impl
Method do_handle_event
Method eh_onsearch
Method get_query_result
At present the method get_query_result belongs to class CL_CRM_AUI_QUERY_SERVICE.
I can create a subclass from this and call it ZL_CRM_AUI_QUERY_SERVIC, then redefine the method get_query_class, and then make the appropriate changes. But that may be all uneccessary. What I don't know is how to ensure this modified code can be called.
I have already made changes for method DO_INIT_CONTEXT, hence the reason the controller class ZL_CRM_IC_AUISEARCH_IMPL is identified. But this was simple because the view linked directly to this whereas you can see the code I need to change is further down in process chain.
I know that method get_query_result calls a number of BADI's, but these BADI's are too low for the information that I need and therfore really need to make my code changes in the get_query_result method.
I have been reading as much as I can on this subject, but without much success and therefore really count on experienced developers like yourselves to steer me in the right direction, or give advice.
Jas

I will not suggest to put your Enhancements into CL_CRM_AUI_QUERY_SERVICE.
Rather in Component BT -> Class CL_CRM_BTIL . AUi Query Service will Internally call the BOL Component ( get query result )
In your Framework Profile Config , you specify the Component Set . Ex: ALL
Component set have a List of Component Ex BP , BT .
SPRO-> CRM -> CRM Cross Application Components -> Generic Interaction layer -> Basic Settings
Now you can have your Custom , Component Set ( Ex : ZALL ) and Component ( ( Ex ; ZBT , Totally advisable for CIC Development Framework )
Have BT Copied into ZBT and Specify ZL_CRM_BTIL ( Inherited from CL_CRM_BTIL )
And in your Custom Component Set , Specify ZBT instead of BT .
Now Specify your Custom Component Set in your Framework Profile .
Now you got the Enhancement Spot in ZL_CRM_BTIL->GET_QUERY_RESULT
Let me know if it make sense

Why does Verizon find the need to change the look of web pages and divert you to other pages?

Why is it that verizon can't leave well enough alone! It seems everytime I log in I can't, because verizon wants me to go to another page or change my info, I just want my email, I don't want to learn about new products and new offers, If there is a time I feel te need, I will come looking, don't shove it down my throat! Another big problem is when they force you to change something before they will let you accesss your email, reminds me of a trick the Russians pull! (If you know what I mean!) If I wanted my page to look like microsofts page ,I would have their service. If you feel the need to change so often, maybe you are in the wrong business!

It can be annoying, but I think their motivation is good. They are trying to make things better for their customers and I think they have, even though sometimes it is annoying. I think it would be nice if they would advise us when the pages are going to be down for maintenance, In the mean time, you could have another E mail account so you can always get access to your E mail.

Help, Need to change NAT from moderate to open for WRT54GS2

just like to the topic says i used these methods:
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
Click on "Administration" tab and disable the option UPnP and click Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox, Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect... i have firmare 1.0.01. i am using 2 Pluglink 9650 Powerline Ethernet Adapters to connect to my xbox for xbox live. if u need anything else let me know. PLEASE SOMEONE HELP

What device is upstream from the router? If you have a modem that acts as a router as well, then you might have a double NAT problem. It's a well documented problem and can usually be solved by bridging the modem or configuring the router to work as a switch only.

I need to move settings from one computer to another

Hello All,
After a computer failure, I need to move the DW CS4 settings (this may not be the best term to use, but bear with) from the dead computer's hard drive (drive works fine) to another machine.
Specifically, all the settings in Site Manager...I really don't want to enter all that in manually, as I have over a dozen sites to maintain.
Is there a way to do this? Copy a certain folder or folders, or a utility in DW?
I have a 2-bay e-sata drive dock attached to the second computer so I can access the files no problem.
Many thanks in advance!
Sincerely,
wordman

Wordman-GL wrote:
SE,
One thing, the drive is accessable on my second computer through the use of a drive dock. The computer that the drve came out of won't boot.
Cheers,
wordman
Bregent is correct about WIndows.
What I was stating is that if this is the original drive from the other computer it is a bootable drive. What you would normally do in this instance is tell the OS that you want to boot from the remote drive and not your C:/ drive in the working computer. On a Mac this can be done by holding down the option key on a restart ( http://support.apple.com/kb/ht1310 ). Then you are prompted to select the disk you want to boot. I believe Windows has a similar feature usually using the F keys on startup. Another way to think of the booting from other drives is that normally the BIOS will look in the USB or CD drive before looking at your hard drive to boot in case you were doing an OS upgrade. Otherwise, when you restarted, it would ignore the CD/USB installation and go straight to the hard drive.
If you are on a Mac I know the files are in the Library somewhere, but I don't know the exact filename and I can't find a KB article pointing to what you should be looking for. But if you are doing this I would be selective and only look for the Adobe and Dreamweaver files and nothing else.

No internt need 2 change settings from contract web 2 pay as u go

Similar Messages

Maybe you are looking for