No logging issues after switchover

We are planning to gracefully swithcover to standby dbatabase due to some hardware maintainance on Primary Database. Db version is 10.2.0.4
I am concerned about any Nologging operation which was done in the past, which might create problems when we open the stdby database as PRIMARY.
Is there a way to figure out, which tables/segments/datafiles has issue with No-logging ?
What are the options available to Overcome this problem.

One of the first steps in creating dataguard is to put the database in logging mode:
alter database force logging;
select force_logging from v$database;So any statement using the nologging option would be ignored.
Is your database in nologging mode and there is a physical standby?? If this is the case then you will have some issues if there were any nologging statements done on the database.
http://docs.oracle.com/cd/B28359_01/server.111/b28294/scenarios.htm#i1015738

Similar Messages

  • Call log issue after upgrading to OS 10.3.1.158​1 from 10.2

    Dear all.
    I have update my BlackBerry 10 os to 10.3.1.1581 and to my surprise i find that the call log os restricted to about 150-200 call whereas it was almost unlimited in the previous 10.2 os .
    BlackBerry should issue a fix asap since this is such a basic features and necessity.
    I find myself in a very bad situation after upgrading.

    I have two call lors. One in the phone app, and one in the hub.
    I feel like the one in the phone app is quite short, but the one in the hub is unlimited.
    Do you confirm on your side?
    That being said, tracking more than 150 previous calls regularly is an extreme usage of the phone, I don't think the OS is made for that. I suggest you use a third party app that will be suited at tracking 200 phone calls a day.
    There are several that are free currently in BlackBerry World (the Free March section).
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Lumia 1520 Battery Discharge Issue After Updating ...

    After updating to Denim, my Nokia Lumia 1520 started to experience the following symptoms:
    Phone charges to 100%, I disconnect and use an app like Instagram BETA, Internet Explorer, Lumia Camera, or any game--after no more than 5 minutes of use, the phone gives a "Critical Low Battery" alert and shuts down. If I try to restart phone immediately, it makes it to the AT&T splash screen or lockscreen and then same battery message appears and shuts down. If I wait 10-15 minutes after the shutdown to restart phone (without recharging) the phone will stay on, but battery level will report to be in the low 20s or 10s (whereas no more than 20 minutes ago, it was 100%).
    When phone is at 100% battery: I take 2-5 photos or record mere seconds of video and I get the same "Critical Low Battery" alert. Upon restarting, some of the photos or video are nonexistent or corrupt files and battery level is reported at 2-5%.
    However, if my phone is plugged in to charger, none of these "Critical Low Battery" alerts come up and I am able to use phone as usual. Considering that I cannot take a vacation and capture nature's beauty with an AC adapter always connected, this is a serious drawback.
    Steps I've Taken:
    Soft-reset
    Full factory-reset
    Moved all apps off microSD card (this improved situation maybe 5%)
    Disabled almost all background app use in Battery Saver
    Replaced microSD card when I thought this was a memory write/read issue
    Installed "Battery" app to monitor battery use. After 750 data points were logged, my average battery life is reported at "16 minutes," which sounds about right.
    My warranty should be expired since I purchased the phone December 2013, so I'm checking in here if anybody has had any luck with battery replacements or with a solution to this issue? At the same time, this issue arose strictly after updating to Denim and I've seen other users report this EXACT scenario. Is there any hope for Lumia 1520 users on this?
    Other reported cases:
    Battery Issue after Denim update: http://forums.windowscentral.com/nokia-lumia-1520/347112-battery-issue-after-denim-update.html
    Battery critically low and shutdown: http://forums.windowscentral.com/nokia-lumia-1520/342343-battery-critically-low-shutdown.html

    Hi albertico, TeJazz, and Samgh. Welcome to the Microsoft Mobile Community. We understand your situation and in response to this issue, we suggest that you perform the suggestions in the photo attached. If the issue persists, we recommend recovering your phone's software using the Windows Phone Recovery Tool. This link will work regardless of your location. If the same thing happens, it's best to take your phone to the nearest Care Point in your area for evaluation. Backup first to avoid data loss.
    Attachments:
    Battery drains fast.JPG ‏147 KB

  • Issues After Disabling IPv6 on Your NIC on SBS 2008

    If you uncheck the IPv6 protocol from your network interface card on your Windows SBS 2008 server you may see the following issues after a reboot:
    Microsoft Exchange services fail to start
    Server hangs at “Applying Computer Settings…” (can eventually logon after 30 – 60 minutes)
    Network icons show as offline
    Some or all of the following events
    Application Log Events
    Source: MSExchange ADAccess
    Event ID: 2114
    Task Category: Topology
    Level: Error
    Description:
    Process MAD.EXE (PID=2088). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185,
    “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
    Source: MSExchange ADAccess
    Event ID: 2601
    Task Category: General
    Level: Warning
    Description:
    Process MSEXCHANGEADTOPOLOGY (PID=952). When initializing a remote procedure call (RPC) to the Microsoft Exchange Active Directory Topology service, Exchange could not retrieve the SID for account <WKGUID=DC1301662F547445B9C490A52961F8FC,CN=Microsoft Exchange,CN=Services,CN=Configuration,…>
    – Error code=80040a01.
    The Microsoft Exchange Active Directory Topology service will continue starting with limited permissions.
    Source: MSExchange ADAccess
    Event ID: 2102
    Task Category: Topology
    Level: Error
    Description:
    Process MAD.EXE (PID=2088). All Domain Controller Servers in use are not responding: SBS.sbs2008.local
    Source: MSExchange ADAccess
    Event ID: 2105
    Task Category: Topology
    Level: Warning
    Description:
    Process MAD.EXE (PID=2088). Exchange Active Directory Provider failed to obtain DNS records for domain sbs2008.local. DNS Priority and Weight for the Domain Controllers in this domain will be set to the default values 0 (priority) and 100 (weight).
    Source: MSExchange ADAccess
    Event ID: 2114
    Task Category: Topology
    Level: Error
    Description:
    Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=952). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge
    Base article 218185, “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
    Source: MSExchangeFBPublish
    Event ID: 8197
    Task Category: General
    Level: Error
    Description:
    Error initializing session for virtual machine SBS. The error number is 0x80040a01. Make sure Microsoft Exchange Store is running. Also, make sure that there is a valid public folder database on the Exchange server.
    Source: MSExchangeTransportLogSearch
    Event ID: 7005
    Task Category: General
    Level: Error
    Description:
    Microsoft Exchange couldn’t read the configuration from the Active Directory directory service because of error: Failed to load config due to exception: Microsoft.Exchange.Data.Directory.NoSuitableServerFoundException: The Exchange Topology service on server
    localhost did not return a suitable domain controller.
    System Log Events
    Source: Service Control Manager
    Event ID: 7044
    Task Category: None
    Level: Warning
    Description:
    The following service is taking more than 16 minutes to start and may have stopped responding: Microsoft Exchange System Attendant
    Source: Service Control Manager
    Event ID: 7022
    Task Category: None
    Level: Error
    Description:
    The Microsoft Exchange Transport service hung on starting.
    Source: Service Control Manager
    Event ID: 7024
    Task Category: None
    Level: Error
    Description:
    The Microsoft Exchange Information Store service terminated with service-specific error 0 (0×0).

    Hi,
    Based on your description, it seems to be the same as the following blog.
    Issues
    After Disabling IPv6 on Your NIC on SBS 2008
    Did you mean that encounter the same issue? If so, there is a resolution in that blog, please check if can
    help you solve the issue.
    If any other issue exists or any update, please don’t hesitate to let me know and provide more details. It
    will help me understand clearly.
    Best regards,
    Justin Gu

  • Performance Issues after an Upgrade

    Hello!
    We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
    1) What could be the causes/factors for the performance to degrade after an upgrade?
    2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
    3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
    Please let me know your thoughts on this.
    Thanks,
    - Krrish

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Having issues after installing Essbase V9.3.1,configuring the SQL interface

    I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
    When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
    Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
    .odbc.ini
    [ODBC Data Sources]
    DOLU003=IBM DB2 ODBC DRIVER
    [DOLU003]
    Driver=/home/db2inst1/sqllib/lib/libdb2.a
    Database=DOLU003
    [ODBC]
    Trace=0
    TraceFile=odbctrace.out
    InstallDir=/home/db2inst1/sqllib/odbclib
    [Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
    Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
    Received Command [SQLRetrieve] from user [Olapadm]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
    Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
    Connection String is generated
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
    Connection String is [DSN=DOLU003;UID=...;PWD=...]
    [Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
    SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
    = 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
    ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
    ODBC Layer Error: Native Error code [0]
    [Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
    Failed to Establish Connection With SQL Database Server. See log for more information
    --------------------------------------------------------------------------------------------------------------------------------------------

    I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
    The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
    The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
    Once I opened the 32 bit driver interface directly and set it up the errors went away.

  • SNMP issues after upgrading Guard

    We recently upgraded one of our Cisco Guards from 6.0(10) to the latest version (6.1(2)) and now the following OID's do not appear to work/exist any longer:
    rhNEAcceleratorCPUUtilization.1
    rhNEAcceleratorMemoryUtilization.1
    The ability to graph these are critical due to the following bug:
    CSCsc05116 - The Guard may stop functioning or start logging errors after reaching 100 percent anomaly detection engine memory utilization. Workaround: Use the show resources command in global mode to view the amount of anomaly detection engine memory currently being used by the Guard. Reducing the number of active zones may free up memory.
    I thought that maybe they changed the way it is queried but was unsuccessful with anything else I tried (using the latest MIB).
    I apologize if I have posted this in the wrong place.
    Any help is greatly appreciated.
    Thank you.

    There is a bug filed for this issue you have mentioned and the work around for this issue is that the Anomaly Detection memory should be freed by deactivating one or more zones, or alternatively by disabling several number of policies/services.
    You can delete a specific service relating to a policy template.
    To delete a service from a policy, enter the following at the policy template prompt:
    remove-service service-num

  • SCCM 2012 R2 - OSD issues after update to CU4

    Over the weekend, I updated my SCCM environment from RTM to CU4.
    All seems to have gone well, except for OSD
    When attempting OSD, I receive the following error:
    "An error occurred while retrieving policy for this computer (0x80004005)..."
    So, a quick look over at smsts.log and I see the following:
    I did some bing'in and googling around for this and found plenty of pages about this error and all pointed to incorrect BIOS times.  I checked the BIOS time on the system I was trying to image, and it was correct (including date).  Just in case,
    I tried two more machines and I had the same issue.  Each machine has the correct BIOS date/time as well, so the issue I have doesn't seem related.
    ... and that brings me here.  Does anyone have any insight as to what might be causing the issue?
    Thanks!

    I noticed two thing in your log file that are worth a check:
    I noticed a 404 error in your log file that might indicate an issue with some files that can't be found. Check the IIS log file for more information;
    I noticed that you're using HTTPS. I've seen weird issues after a CU update in which the distribution point certificate got missing. In that case, check the distribution point properties and update the boot image.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude
    I did miss the 404 message... silly me.
    This definitely pointed in the right direction.  What we found was that it wasn't an issue IIS or the https certificate, but our certificate chain had issues.  We cleared out the certificate chain issues and re-installed the MP role.   This
    cleared the issue immediately.
    Thanks Peter for the guidance! 

  • 8.1.1.11 upgrade issue after IRM

    Hi ,
    After upgrading to Siebel 8.1.1.11 (Open UI) from 8.1.1.7, I'm facing below issue after login in Open UI application, but not able to reproduce in Non Open UI (Activex). I'm able to log into the application, but I see welcome message is not appearing the Open UI screen, it throws below error .
    Error : "why can't i see this applet open ui cannot display this type of applet" .
    Any Suggestions to debug this issue ?
    Thanks

    RNagaraj,
    The reason you are seeing that issue is because there are 5 tables in the database, which would be pointing to some important files for OpenUI. Sometimes, IRM does not load these 5 tables with required data. This is a part of the upgrade, and please ensure you follow the below steps to resolve your issue:
    This is to be checked after completing IRM:
    Query on the DB for the below 5 tables to check the number of records they hold. As per Oracle, the expected results are as shown below:
    SQL Query with the expected results:
    select * from SiebelDB.dbo.S_UI_EXPR -- 86 Rows expected
    select * from SiebelDB.dbo.S_UI_FILE -- 131 Rows expected
    select * from SiebelDB.dbo.S_UI_OBJ_EXPR -- 257 Rows expected
    select * from SiebelDB.dbo.S_UI_OBJECT -- 167 Rows expected
    select * from SiebelDB.dbo.S_UI_OBJ_EXP_FL -- 532 Rows expected
    Let us know what is the record count of the above tables?
    Regds,
    Ashwin

  • Best Practice to troubleshoot a Crawler Issue after SQL Server restarts

    Hi Everyone
    I am after some general advice or a suggested place to start when troubleshooting crawler issues after an unplanned, out-of-sequence server restart.
    Specifically, the SQL Database in the SharePoint 2010 farm. Better yet, is there a standard practice way of resolving such issues?<o:p></o:p>
    So far articles I have found suggest options from reviewing the crawl logs, creating a new crawl component, right through to using fiddler to monitor the crawler.
    Are these sufficient places to start / methodologies to follow, what else should be considered?
    Any advice greatly appreciated.
    Thanks,
    Mike

    Well, as I said before, there are lots of different potential issues & resolutions for crawlers.  It really depends on the issue.  I would say that the base troubleshooting steps start the same no matter which service/feature you are looking
    at.  So, I'll try to keep this sort of generic, but beyond finding the details of the problem, the SOP or process will vary greatly based on what the error is.  I hope this helps, and sorry if it's not specific enough.
    1 - check the ULS logs
    2 - check the windows application logs
    3 - verify related services are running (get-spserviceinstance), possibly stop/start them to reprovision the instance on the affected server
    4 - clear the config cache (this alone will clear about 30% of your basic problems)
    6 - verify disk space & resource consumption on affected server (& SQL, SQL is always the potential to be the true "affected" server)
    7 - iisreset
    8 - verify connectivity between all servers in the farm and SP
    9 - verify requir3ed features activated
    10- check if any changes were made to environment recently (new hardware, updates to OS or apps, updates to GPOs, new solutions, etc)
    11- check if the issue is reproducible in another environment (only reliable if this is a similar environment, i.e. same patch level test farm or dr farm).  see if it occurs in other site collections within the web app, different web apps, different
    servers/browsers, etc, basically just try to nail down the scope of the problem
    There is a whole slew of thiings you could check from verifying certificates & perms, to rerunning psconfig, to checking registry keys, again I go back to it depends.  hopefully this can get you started though.  in the end ULS is where all
    the real info on the issue is going to be, so make sure you check there.  don't go in with tunnel vision either.  if you see other errors in ULS, check them out, they may or may not be related; SharePoint is an intricate product with way more moving
    parts than most systems.  fix the little quick ones that you know you can handle, this will help to keep the farm clean and healthy, as well as crossing them off the list of potential suspects for your root cause.
    Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

  • After updating my mac book pro to the osx yosemite.am getting some issues after starting up.a soon as it gets on the destop the screen start blinkingand i cant do anything

    After updating my mac book pro to the osx yosemite.am getting some issues after starting up.as soon as it gets on the destop the screen start blinking and i cant do anything.Please help me!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • MAJOR Wireless, Safari, Dock & Finder issues after latest updates

    I'm having major issues after the latest AirPort, Security Fix and Safari updates in 10.5.2: Safari keeps crashing every hour, Wireless connections time out and Airport occasionally crashes when I try to turn it off/on. Sometimes the systems gets stalled and has lag - I'm not sure if Safari crashing is causing this or it's the system that causes Safari to freeze and crash - often the dock becomes unresponsive too and makes me force shutdown and reboot. I've had to reboot like this more than 4 times today, something isn't right. My questions, therefore:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Thanks in advance!

    Hi Reinis,
    In this situation, the first thing I would do is log into a different user account (if you do not have one, create one) and then see if the symptoms persist with the new user account. To directly answer your questions:
    1) Is there a way to restore my Mac to the state BEFORE the latest upgrades?
    Archive and Install using the OS DVD or by using Time Machine if you have it enabled.
    2) I can't recall the exact names and versions of the updates, is there a way to access the update log files, so that I can take notes on what actually was updated and when?
    Fire up System Preferences, click on the Software Update icon and then select the Installed Updates tab.
    3) Is there any other way to access log files that may have more information on the crashes that I've had lately?
    Console, which is in your Applications/Utilities folder.
    Kryten

  • Propagation after switchover to standby

    Hi
    My DB Version=10.2.0.4
    I had a stream relation that working correctly after switchover to standby in destination now in source database i got the following error in propagation:
    select status,error_message from dba_propagation
    DISABLED
    ORA-02068: following severe error from AQHOS
    ORA-01033: ORACLE initialization or shutdown in progress
    ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
    ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7616
    ORA-06512: at "SYS.DBMS_AQADM", line 631
    ORA-06512: at line 1
    i corrected all tnsnames and dblink is working correctly but still i have this error.
    WHAT I MUST TO DO?

    Refer to metalink document _STREAMS propagation to Primary of physical Standby configuation errors with Ora-01033, Ora-02068 *[ID 359971.1]*_
    You need to set SERVICE_NAMES. Hope this helps resolve your issue.
    Thanks

  • ODI logs deleted after scenario refresh

    Hi,
    I'm using a load plan which starts half a dozen scenarios.
    All scenarios are packages scenarios version 001.
    When I modify any package I regenerate any related scenario.
    (Basically I'm not using the versioning system supplied by ODI, but I need to generate scenarios anyhow because ODI does not allow packages in load plans).
    So fa so good, everything works despite an issue with the logs.
    Every time I regenerate a scenario, ODI deletes all the related logs.
    To me, this does not make sense.
    In example I wuold like to see if the "new" scenario impacts loading times, but I have no more "old" scenario logs.
    Any way to avoid logs deletion after scenarios regeneration?
    ODI 11.1.1.6
    Regards,
         Corrado

    Hi,
    thank you for pointing it out, but the user parameter "Delete linked sessions with scenarios" is already set to "No".
    (Also the docs seems to say this parameter only applies to manual deletion of scenarios from GUI).
    Regards,
         Corrado

  • Remote Desktop Crashes When trying to log-in after changing password on the remote computer

    Hi.
    I use cisco VPN to connect to my work computer.
    I can use RDC to connect to any computer on home network without issue. 
    Yesterday I changed to password on my work computer and now every time I try to log from my home computer RDC crashes.
    I've disabled printing/clipboard on local devices and resourses, and I've deleted all the RDC cache files on the computer but I continue to have the same issues. 
    please help
    Faulting application name: mstsc.exe, version: 6.1.7601.18540, time stamp: 0x53c72529
    Faulting module name: ntdll.dll, version: 6.1.7601.18798, time stamp: 0x5507b864
    Exception code: 0xc0000374
    Fault offset: 0x00000000000bf922
    Faulting process id: 0x44c
    Faulting application start time: 0x01d078d866a9ba25
    Faulting application path: C:\Windows\system32\mstsc.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: 65a988c9-e4cc-11e4-8a77-f46d04eedf8b
    http://answers.microsoft.com/en-us/windows/forum/windows_7-winapps/remote-desktop-crashes-when-trying-to-log-in-after/cc45b7be-62ee-4f83-b50b-db028ee32a7f

    Hi hg,
    I didn’t found relevant settings in remote desktop connection manager, I checked the “Use multiple monitors when necessary” under tools->options, but seems like it is used for span a full screen over multiple monitors. For now I’d suggest figuring out
    why your remote session keeps crushing.
    I suspect the crash is not related to password changing, similar cases normally occurs after some local device driver, please try to disable the local printer in Remote desktop connection local resources first.
    Regards,
    D. Wu
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for