No matter the settings, I can't get password to work in setting up tbird using gmail!
Trying to setup tbird. password is correct but cannot get the imap server to accept. no firewall anywhere. help!
I tried going to this site: http://tones.wolfram.com/ and using the generate tone application, but whenever I click on the play button in Safari nothing happens. When I try and click on the play button in chrome a yellow alert bar opens up at the top of the screen telling me to install quicktime player. I have installed both quicktime X and quicktime 7 with no results. I am able to download the generated midi files on a PC, transfer them to this mac, and play them with quicktime 7 but I can't seem to get anything to play while I am in the web application itself.
The files you refer to are really MIDI files. As discussed over the weekend, "real" MIDI files do not appear to be supported by the browser QT plug-in software or QT X player app any longer. Therefore, the files do not play in a browser which accesses a web page programmed/defaulted to call the QT browser plug-in for playback. On the other hand, MIDI playback is still supported by the QT 7 player app if installed on your system. Thus, MIDI files downloaded to your local hard drive can be played locally on your system. In fact, if you try to play the MIDI file using QT X and QT 7 is available, then the QT X player should automatically ask you if you want the file to be played by the QT 7 player.
The same also currently holds true for WMA Pro encoded MIDI files as far as browser playback is concerned. However, WMA Pro encoded MIDI content can be played using either the QT X or QT 7 player apps, but only if one of the Flip4Mac codec packages is installed on your system AND only if you change the ".mid" file extension to ".wma" so that the player can associate the file container with the correct playback codec component.
Similar Messages
-
Tried both ways in the Wiki, still can't get network printing work
Hi,
I have tried both the client and server ways following the Wiki, still could not get network printing work.
For the first way, I tried to put either the host name or the ip address (starting with 192) of the remote printer into /etc/cups/client.conf. But both Okular and Evince failed to see the printer in the dialog.
For the second way, with cups-browsed running, it only managed to discover printers in my local network (ip starting with 137) which I have no access. I tried to manually add the printer using its ip, but it still did not work.
What can I do? I have spent hours trying to work it out but failed. I would appreciate a lot your help. Thanks.Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
-
Received notice of a new version of Firefox and clicked to receive it. It downloaded and I did the install. After restarting the computer I could not get Firefox to open. Tried to reinstall again and had the same results.
What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs. -
I was told a bunch of things from a bunch of places..
Story 1: source: some ad I read) Call-id on TV needs either digital voice or a regular fios pots phone + fios internet. I have the latter & the feature does show up on the box but when I try to enable it, I get an error that I need the call id feature on my phone to make it work.
Story 2, source: fios support 12/18/09) I hear that the feature is currently only available to customers with Digital Voice & it looks, to him, like its available in NY. He advised me to contact support later this morning (when they start as it is currently about 4am) & see if I can change the service over to digital voice, he advised me he thinks it is the same if not cheaper. He said it will require the replacement of the ONT.
Questions:
1)
Do I need digital voice to make this feature work?
Either way, is this service available in NY?
Does it cost more then the fios standard phone, is there an additional fee for a service call or to have a replacement ONT installed?
2)
If I don't need it, when will it be available for regular pots phone customers in NY?
Otherwise, it should be understood that the feature doesn't work at all in NY; I mean, it is in the list for the settop box but it is unable to be turned on. I know this cause I have seen posts on another forum of people from at least NY, complaining they have the same problem I have.There is a long thread on this at another forum..
http://www.dslreports.com/forum/r23501543-IMG-Caller-ID-on-in-New-York
It is normal for the box to start showing the option before it's actually live.
You won't need any service call or change of equipment. it will just start working when it's live.
From that thread some areas of NY have it. Verizon doesn't announce schedules on anything too much so you are highly unlikely to get an answer to "when". -
i cant update to 5.0.1 because it says im not updated to the internet. can someone help me?
Jailbreaking voids the Apple warranty and also means you will not get any support from Apple, including from this Apple forum.
-
I have entered the information from GoDaddy under manual setup and the mail app tells me it cannot connect to the server. It does connect to a gmail account, but that is not helpful. I was wondering if anyone has tried linking to GoDaddy or other account manually and what additional steps it takes.
Actually, I was able to connect to an IMAP account from (German mail provider) posteo.de without problems. Not so with FastMail.fm, which is a much bigger service provider than posteo.de, and also pretty much IMAP standard compliant.
Are there different IMAP configurations (all folders on the same level vs. all folders as subfolders of INBOX) that can influence this? And what can be done to connect FastMail to Firefox OS? -
I just upgraded my iMac to yosemite 10.10.2. Now the app my bank uses, FinanceWorks, doesn't work. Anyone know how to fix this? Thank you!
I work for Digital Insight, the digital banking vendor that your bank works with to provide you with access to FinanceWorks. Just to be sure, are you using Safari as your web browser when trying to access FinanceWorks? If so, the upgrade to Yosemite likely changed your browser settings in Safari, specifically for cookie handling. The easiest work around is to go to the “Manage Money” tab in your Online Banking, control-click one of the FinanceWorks options (Account Overview or Trends), and choose to open in a new tab. From then on (until you clear your browser history or cookies), FinanceWorks should work normally within the tab.
Also of note, Digital Insight was divested by Intuit in 2013 and is now owned by NCR. -
I've installed it and can't get it to work
I did the uninstall, reinstalled, checked settings, and can't get it to work.
What is your operating system & version?
What is your web browser?
And what exactly means "can't get it to work"? -
Can't get VPN to work on RV220W
I am a home office user who bought a RV220W router for the speed advertised on smallnetbuilder. I am trying to set up the VPN but can't get it to work with the Quick VPN client. I am using dyndns to manage the dynamic IP and have entered that into the setup noted below. I can access the router remotely (remote administration) when enabled using the dyndns address so I know that is working.
IKE Policy Table
General
Policy Name: krafty001vpn
Direction / Type Responder
Exchange Mode: Aggresive
Enable XAUTH Client: None
Local Identification
Identifier Type: FQDN
FQDN: krafty001.dyndns.org
Peer IKE Identification
Identifier Type: Remote Wan IP
FQDN: krafty001.dyndns.org
IKE SA Parameters
Encryption Algorithm: 3DES
Authentication Algorithm: SHA-1
Authentication Method: Pre-Shared Key
Pre-Shared Key: xxxxxxxxx
Diffie-Hellman (DH) Group: Group 2 (1024bit )
SA-Lifetime: 28800 Seconds
VPN Policy Table
Add / Edit VPN Policy Configuration
Policy Name:
krafty001vpn
Policy Type:
Auto Policy
Remote Endpoint:
FQDN
krafty001.dyndns.org
NETBIOS:
Enable
Local Traffic Selection
Local IP:
ANY
Start Address:
End Address:
Subnet Mask:
Remote Traffic Selection
Remote IP:
ANY
Start Address:
End Address:
Subnet Mask:
Split DNS
Split DNS:
Enable
Domain Name Server 1:
Domain Name Server 2:
(Optional)
Domain Name 1:
Domain Name 2:
(Optional)
Manual Policy Parameters
SPI-Incoming:
SPI-Outgoing:
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Key-In:
Key-Out:
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
Key-In:
Key-Out:
Auto Policy Parameters
SA-Lifetime:
3600
Seconds KBytes
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
PFS Key Group:
Enable
DH-Group 1 (768 bit) DH-Group 2 (1024 bit) DH-Group 5 (1536 bit)
Select IKE Policy:
krafty001vpn
Quick VPN Setip
User Profile: homevpn
User Name krafty001vpn
Password: xxxxx
Server Address: krafty001.dyndns.org
Port for QuickVPN: Auto
Any help in identifying what setup component I have configured incorrectly would be appreciated
ThanksI am not sure this will help but make sure the following is set correctly:
Currently VPN is somewhat broken on all versions of firmware of the RV220W including beta where VPN will ONLY negotiate on 443. If you are port forwarding 443 to a server or something else it will fail. You must allow the VPN to authenticate on 443. The router SHOULD be able to connect on 60443 as indicated on the QUICKVPN software however it doesn't this has been confirmed by a CISCO engineeer I have been speaking with regarding my VPN woes. Currently there is NO ETA on this fix.
But since you didn't mention if your 443 ports were being routed elsewhere I figured i would lay out that information here incase you where. Also I strongly recommend contacting Cisco Support for the beta firmware it makes the RV220W much better.
Also the reason for the update to the beta firmware it resolves the hair pinning problem which could also lead to VPN issues. -
How can I get dashlane to work with firefox
i have added the extension but can not get a response from dashlane.
I don't use Dashlane myself... Does their support article help?
http://support.dashlane.com/customer/portal/articles/390903-how-to-verify-the-firefox-extension -
just got an Ipad and am working on setting it up. the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad. any help would be greatly appreciated.
Double click the home button (square) and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
Good luck hope it works. -
The wifi on my iPod doesn't work since upgrading the software to ios 6 therefore when I try to reset to the original settings I can't get my original software back. Can anyone help me with this?
greeneygreeney wrote:
so you can't ever restore it to the factory settings? that is a big shame.
"It will ALWAYS restore to the lates available software.
You cannot downgrade." -
I can still receive icloud ( ME email address) emails fine. I have not changed my settings at all. I have however tried all the settings I can find on the support pages. PLEASE HELP. Nothing has changed. This suddenly just started happening around a month ago. To frustrate me apple does not seem to have a support email or any method to contact them with this issue to do with their email product. I have spent ages going through the apple support sites and I keep getting asked for an apple product to mark it against. I have no apple product as I am using a PC but I am accessing and using their email product. Is there even a phone number I can call? Surely there is a support area for their Email server issues. Can anyone help? It is driving me mad and causing me major issues. My outlook is Outlook 2010 on a windows 8 PC. As I have said it worked fine then one day decided to stop sending emails.
Thanks for your help.Hi - this problem is discussed here:
https://discussions.apple.com/thread/5375046?start=0&tstart=0 -
have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciatedYou are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network. -
I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you
You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Bit of a problem (Headphone Jack and Scre
I just got a Zen Micro not too long ago and I love it. But recently I was having issues with the headphone jack. I was only getting sound in one ear and I thought at first it was an issue with the headphones, but it also happened with the new headpho
-
Text in automatically generated line items
Hi All, Can anybody help me how to maintain Text in line items generated automatically.eg: While posting vendor invoice WTax line item is entered automatically. Similarly accounting document generated from MIRO but there is no text assigned to it, ho
-
Firewire External Enclosure very hot.
I am wondering if anyone else has a Serial ATA Seagate 200gb 7200rpm hard drive in a Firewire 800 external enclosure. Mine runs very hot in comparison to my IDE hard drives in the same OWC brand Firewire 800 enclosures. If this is abnormal I would li
-
Multiple CHECKBOX Using Select Query in htmldb.item API
Hi, I have a requirement where I need to create a Record using HTMLDB_APPLICATION.CHECKBOX ..but having multiple values(around 8) using the Select statement. I tried the STATIC thing, but it shows only 2 values. Is this possible ? How ? Thanks Sandee
-
i am having trouble displaying errors from my validate() of ActionForm. following is my code. ActionForm: public ActionErrors validate(ActionMapping mapping, HttpServletRequest request) { ActionErrors errors = new ActionError