No Option To Install SNMP Service on Windows Server 2012 Standard

Hi,
was wondering if someone could help me with the below issue.
i am trying to install the SNMP service on our new 2012 server however the role doesn't even exist?
could someone advice on how we can install this role? i have looked everywhere but am unable to find an answer
thanking all in advance

the snmp role is being depreciated and replaced by CIM.
but you should still be able to add it.
its a feature - from server manager select install roles and features, click through the roles till you get to the features page and select snmp from the list
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Similar Messages

How to install device cals on Windows Server 2012 standard edition

Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.

Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is it ok to install Exchange 2013 on Windows Server 2012 Standard?

Hello everyone,
I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
Thanks in advance.

Few things to note.
There is
NO SBS in 2012
All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
Rajith Enchiparambil |
http://www.howexchangeworks.com |

Guideline of installing remote desktop services in window server 2012 r2

Hi,
I tried to install remote desktop services in window server 2012, I joined my current domain ( in window server 2003).
During installation, it require me to promote my server to domain controller? This is one of the requirement for remote desktop services?
If I didnt join any domain, it prompt me I must join a domain.
Anyone can advise me? provide me a steps by steps guide will be perfect!
Thanks

Hi GP_IT001,
In your current network do you currently have a domain controller? You mentioned that you "had" a Domain Controller running Windows Server 2003.
Am I correct in thinking that you no longer have this server?
As this article mentions:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/f3d0543a-edab-4eb2-8360-3658a3351bb0/licensing-issue?forum=winserverTS
You will need a domain environment which means you'll need a server that is a domain controller, and I believe that it will also need to operate Windows Server 2012 or above. You could, if you wanted, setup a new server (virtual or physical) as a domain
controller and use that if you wish.
Best regards,
Please remember to mark the replies as helpful if they help, or as answers if they answer your question. Please also unmark the answers if they provide no help.
Zach Roberts
Independent Microsoft Community Support Advisor
Disclaimer: I don't work for Microsoft. Any advice given is my own and does not represent Microsoft.
Follow me on Twitter:
@WindowsZach

Windows Server 2012 Standard - Remote Desktop Management service won't start

Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
The Remote Desktop Management service gives the following error message any time it is attempted to start:
"The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
The Event Viewer error message is as follows:
"The Remote Desktop Management service failed to start. Error code: 0x88250001"
Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
server and has AD DS role installed, is virtualized to have one Hyper-V server.
I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
only one suffering from this issue.
I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
How do I mend Remote Desktop Management service to start?
Appreciate your help!

Hi,
Thank you for posting in Windows Server forum.
Can administrators perfectly connect to RDS environment?
In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
No RDS license when you connect to an RDS farm in Windows Server 2012
http://support.microsoft.com/kb/2916846
If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
What's New in Remote Desktop Services in Windows Server 2012
http://technet.microsoft.com/en-in/library/hh831527.aspx
Install Remote Desktop Services Failed on Windows 2012 Server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Windows deployment services in windows server 2012 : operating system not found

Hello,
In order of learning WDS in Windows Server 2012, I created a simple test environment composed of :
A Domain controler running WS 2K12 and hosting both DHCP and WDS services. (with the option of not listening port 67 checked while installing WDS)
A test computer, with no operating system
I also added a Windows Server 2012 Standard WIM file and added also (located in [DVD]\sources\install.wim), boot file image (located in [DVD]\sources\boot.wim)
But now, when i start the client, it gives the following error:
While i don't find any reliable solution on Internet, Im looking for your help if ever, anyone faced this problem and found a solution for it or not
Thanks in advance!
Lotfi BOUCHERIT

I find it strange that client and server IP are the same. Is there any sort of DHCP relay agent running on your WDS server ?

Windows SharePoint Services on Windows Server 2012 R2

Hi,
Can someone please guide me on how to install/activate windows share point services on Windows Server 2012 R2?
Many thanks.
Thanks,
Mathan

Hi Mathan,
To install the Sharepoint 2013, please refer to the guide below,
Install SharePoint 2013
http://technet.microsoft.com/en-US/library/cc303424(v=office.15).aspx
If you have any question about SharePoint, to get better help, please post your question on the forum below,
http://social.technet.microsoft.com/Forums/office/en-us/home?category=sharepoint
Best Regards.
Steven Lee
TechNet Community Support

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.

While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks Everybody

Hi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

How to install Sticky Notes in Windows Server 2012 R2

I want to install Sticky Note in Windows Server 2012 R2. If this app is not available in Server 2012 then which is the
best "Sticky Note" application for this platform.
Thanks

Here are instructions for 2008 -
http://www.win2008r2workstation.com/sticky-notes/ I'm not sure about the legality of that, as I think Microsoft has some rules in their license about copying files from one distribution to another. You would need a lawyer to check on that.
Otherwise, a simple Bing search will turn up freeware apps you can download.
.:|:.:|:. tim

High availability SQL Server requirements for Remote Desktop Services in Windows Server 2012

Good night,
Thanks for reading this question, I do not write much English.
I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf, I searched in different microsoft link but I have not received a response.
Kindly appreciate your cooperation and attention.

Hi Alejandro,
I am implementing Remote Desktop Services in Windows Server 2012, I need to know the size of the database to create and feature on the .mdf and .ldf
If you want to know the size requirements of .mdf abd .ldf files, since they are parts of SQL database, I suggest you refer to SQL forums below to get more professional support:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlgetstarted
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
In addition, here are some articles regarding RDS deployment for you:
Remote Desktop Services Deployment Guide
https://technet.microsoft.com/en-us/library/ff710446(v=ws.10).aspx
Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style
http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Downloaded Evaluation Version of Windows Server 2012 Standard- install is asking for product key

I downloaded the evaluation version of Windows server 2012 standard from the Microsoft TechNet site.
When I try to install server 2012 as a new virtual, I'm prompted for the product key for server 2012.
I do not have the key. How do I get the key? Or, why is this happening on a evaluation version?
Does anyone out there have the key for Windows server 2012 standard evaluation version, or know where I can get it?
Thank you.
rhinoguy1

Hi rhinoguy1,
Please down load ISO from following website :
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows server 2012 Standard Edition Licensing

We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Thanks,
Amit.

We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Note that some information will be different for SPLA (so, check the SPUR to ensure you are in correct compliance).
http://www.microsoft.com/licensing/licensing-options/spla-program.aspx
http://www.microsoftvolumelicensing.com/DocumentSearch.aspx?Mode=3&DocumentTypeId=2
(if the information provided, clearly states that "this applies to all Volume Licensing programs", this also applies to SPLA, unless SPUR states differently)
(contact your reseller/partner/advisor, or MSFT VL team if you are unsure)
Windows Server 2012 R2 FAQ
http://www.microsoft.com/licensing/about-licensing/windowsserver2012-r2.aspx#tab=4
Windows Server 2012 R2 Licensing Guide
http://download.microsoft.com/download/E/6/4/E64F72BF-55E9-4D85-9EFE-39605D7CE272/WindowsServer2012R2_Licensing_Guide.pdf
Licensing Brief - Licensing Windows Server 2012 R2 for Use with Virtualization Technologies
http://www.microsoft.com/licensing/about-licensing/briefs/win2008-virtual.aspx
Licensing Brief - Licensing Microsoft Server Products for Use in Virtual Environments
http://www.microsoft.com/licensing/about-licensing/briefs/virtual-licensing.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

No Option To Install SNMP Service on Windows Server 2012 Standard

Similar Messages

Maybe you are looking for