No Payment data message in Payment Schedule Report (S_ALR_87015205)
Dear All,
I am getting the message "No Payment Data" when I am executing report S_ALR_87015205 in Money Market, when there is payment data existing for the given selection criteria, i.e., company code, product type and date range.
Any clues would be helpful.
Thanks in advance
Regards
Komal
Hi Komal
Could you please check the settings for payment relevance for update types are configured in your system? You can define the relevance for each payment that you want to be shown in the report in customizing under:
Financial Supply Chain Management
-> Treasury and Risk Management
-> Transaction Manager
-> General Settings
-> Information System
-> Payment Reporting
-> Definition of the Payment Relevance of an Update Type
I hope then data is displayed for you.
M Trein
Similar Messages
-
Dynamic date parameters for a scheduled report that runs every day
I have a report that has input parameters for a start date and
end date. The report will be scheduled to run once a day at a
scheduled time. I need the report to automatically set the start
date and end dates when the report runs at the scheduled time.
When the report runs at the scheduled time, the end date needs
to be set to that time and the start date needs to be set to 24
hrs before the end date. I want the start and end dates to roll
forward automatically when the scheduled report runs each day. I
don't want any user intervention to change the start and end
dates every day. How can I do this in a report ?
Also, since the report is scheduled to run each day, I want the
output to be saved to a unique file name each time the report is
run as each day's report will report on the data only for that
day. How can I get the report to save to a unique file name
automatically each day ? Again, I don't want any user
intervention where they would set the output file name manually.Try adding the following in the beforereport or beforepform
trigger, before the RETURN clause (TRUNC gets rid of the time
component of the date):
:p_date_from := TRUNC(sysdate) - 1;
:p_date_to := TRUNC(sysdate);
:desname := 'REPORT'||TO_CHAR(sysdate, 'DDMMYYYY')||'.txt'
Paul Williams -
Compensation with changing payment date
Our customer has to close a lot of incoming invoices through Compensation process (close in the same time some incoming and some outgoing invoices of the same party). We plan to solve that through payment batch: the invoices will be selected and the batch will wait (will not be confirmed) till partner confirm compensation. But, very often, in the moment of confirmation, payment date has to be changed because it has been agreed differently with Partner Company.
EBS doesn't allow changing payment date in a payment batch.
May we create a procedure (concurrent request) to change payment date in a not confirmed payment batch? (Payment date is CHECK_DATE in AP_INV_SELECTION_CRITERIA_ALL). We know that we have to update also PAYMENT_DATE in AP_SELECTED_INVOICE_CHECKS_ALL.
Is there anything else what we have to change together with previously mentioned?
The procedure will be applicable only for payments in functional currency.hi frane,
we cannot manipulate the data in apps tables other than interface tables provided by EBS.
if the payment date is not the value date for bank, then you can leave it as it is. if it is so important, modify your payment format program to change the date while creating the bank payment file for banker. as far as payment date on the unconfirmed batch it will stay the same and should not make any difference as long as the confirmation of the payment batch is not crossing the payable period.
thanks, -
Scheduled report with parameters
Hello Experts!
Is it possible to pass or somehow set two date parameters for a Scheduled Report????
Typically this report is executed on an On-Demand bassis prompting the user for these values. But I would also like to run it as a scheduled report where I pass two dates that populate the params automatically..
Thanks
DanHi,
The request you need is not present in enterprise.
However you can schedule reports as recurring with different time period.
Thanks,
Subheads Ghosal -
AP:selected payment schedules report "Credit reduces payment amount below
Hi all:
I have a PPR reject one Debit memo with reason "Credit reduces payment amount below zero" at first and shows out in report "selected payment schedules report" as Unselected Scheduled Payments.
PPR Pay through date: 28-Nov-2011
Issued Debit Memo date: 28-Oct-2011.
But when change the Pay through date of PPR to 28-Nov-2012.
Then this issued Debit Memo can be selected and processed.
Any idea about this issue?
Your reply will be very appreciated.
Thank you
Beryl
Edited by: user10937857 on Dec 13, 2011 1:40 AM
Edited by: user10937857 on Dec 13, 2011 7:01 PMHi:
Thank you for your kindly reply.
I have already checked these 3 notes. for the setup one, customer has checked ,the setup is correct.
For the other patch solution notes.
If this issue is a bug issue, then why when they extend the PPR Pay through date to next year, then this Credit memo can be selected and processed?
Confusing.
Any idea about this?
Thank you very much -
Dear friend,
i wants to know payment schedule repoprt where
Sr.No. Project name Building name apr-09 may-09 Jun-09 Jul-09 Aug-09
1 company code plant name % % % % %
it is a construction company, wants to payment schedule report .
here each project one company code .
client wants to see for project (co-code) how much amount expenses. each month (posting period).
2 Same thing how much received from customer.
please help me.Hello,
One of the easiest option to see the expenses is laying in FBL1N.
You only need a nice setting in the selection fields.
1. Company code
2. Cleared items: the period you want
3. Filter only on the Cleared documents
4. Sort the result into the order of Cleared dates
You'll get the list of the paid items in date order.
Export to excel and separate per months.
Do it for all company cdes.
REgards,
Endre -
Reports for PO to Payment date
Hi
I required the report which gives the PO No, Mat Doc no, GRN Dt.,IVno.
IV date and Payment date/clearing date.
My requirement is payment date/clearing date against the PO no./ Mat Doc no./IV No
Thanx in advance
Vikrant HandeIn standard report is S_ALR_87012103 - List of vendor line items,Search with help of hot keys E or W
otherwise u need to develop customized report. -
Fi report to find last payment date
Hi guys
How can i find the last payment date of a customer.
Suppose a customer has a balance of 100 $ as of today and he clears an amount of 20 $ tomorrow so 21.10.2008 becomes his latest payment date, where will this be stored any idea?
ThanksIN KNKK table there is a field CASHD & CASHA.check if this works.
otherwise do this,
there will be a doc type for customer payment (DZ or something)
give that doctype in BKPF and get the line items from BSEG and filter it based on customer number.
Sort the records based on the posting date descending.first record would give the last payment. -
Payment Date is Above the Cumulation Window
Hi gurus - We have a situation with a Canadian employee who was converted into our system as a retiree. The only payroll results he has are NAMCs for Year End adjustments.
We are testing an issue related to YE and are making NAMC entries on IT 0221 through tcode PAKY. Payment date = 07/31/2009. Error = Payment date 07/31/2009 is above the cumulation window (07/01/2007 - 07/31/2008). If I use a payment date of 07/31/2008 we don't get the error - understandably. But even if I successfully run an adjustment for 07/31/2008 and then try for the next year, 07/31/2009, I still get the error.
From what I understand, the program is basing the cumulation window on the last payroll resutls. However, in the CRT and TCRT in his last payroll results, he has cumultions for the year 2008 from the NAMCs that were performed for 2008 YE last year. That would lead me to believe that his cumulation window would have moved up (past 07/01/2007 - 07/31/2008).
Can anyone explain how SAP defines the "current cumulation window" and/or how to update the cumulation window to a more recent period?
BTW - the entry in T56C5 is set to 1.
Many thanks,
ChristyHello,
You must enter a paydate within a given time range - the cumulation window.
If one control record is set too far back in the past, the cumulation window is determined incorrectly which leads
to the mentioned error message.
The solution should be:
Please ensure that the control records of all effected payroll areas are set to a period around a date of today.
(This is also valid for the control record of the non payroll relevant payroll area. If you delete this record, note 355889 has
to be applied.)
Also please check the following: Look at IT0000 and IT0001 and check all the records you find. Then check all the payroll
areas and look if any of them are not payroll relevant. Finally have a look at the payroll periods and find out if they were
correctly generated, if not generate them.
I hope this information helps you.
With Regards,
S.Karthik -
I am trying to find out about on line payment dates.
When I have made payments via my checking account, I am able to schedule those payments.
Today I made a credit card payment and was unable to schedule that payment for my due date.
I was charged today.
I don't understand why I can pre-schedule an e-check but not a credit card payment.Hey,
I think you will find that you have to have a debit/credit card stored on yur account regardless of whether your have iTunes Credit or want to purchase a free App. I don't know why, I assume its for ID verification or is part of the terms and conditions. I occasionally have to re-verify my credit card info even when just trying to run Update on one of my Apps or like I said downloading a free App.
If you need further clarification all you can do is contact iTunes Support:
https://expresslane.apple.com/ServiceOptionAction.action
Hope this helps. Andrew -
Error in commitment fund date from a payment request
Hello,
When we try to post a payment request from a funds commitment position that has been added to the fund commitment in a date later than the posting date of the payment request, we receive an error message FI_E050.
In our example the message FI_E050 is "Posting date/period 20.04.2009/004 is earlier than existing date/period 07.07.2009/007".
The posting date of the payment request is 20.04.2009, the posting date of the funds commitment is 02.01.2009 and the creation date of the position of the funds commitment is 07.07.2009.
We found the same issue for a modification of a commitment position and we solve it in SPRO as told by SAP OSS but now we have found the same error in an added position.
Anyone has found this issue?
Thank you very much in advance.
Kind regardsHello Mar,
I will try to explain it better. Sorry for the inconvenience.
The FM update profile is 000359.
PB: Annual-Based Encumbrance Trkg is marked.
CB: Period-Based Encumbrance Tracking is marked.
Then, we have the value type 65 with this values:
Payment Budget X
Commitment Budget X
Year-Dependent Control Between Pa
Payment budget reduced X
Commitment budget reduced X
Payment Budget Date, Fiscal Year B
CB Date, Fiscal Year B
PB Date, Approval Year F
CB Date, Approval Year F
CCN logic payment budget
CCN logic, commitment budget
PB: Period-Based Encumbrance Trac X
CB: Period-Based Encumbrance Trac X
Budget assigned X
Revenue/expenditure control
PB: Annual-Based Encumbrance Trkg
CB: Annual-Based Encumbrance Trac
Approved Amounts in Payment Budge
Approved Amounts in Commitment Bu X
Rest of the values has not been updated with a profile value type dependency.
After your answer, I have made a test between a funds reservation and a funds precommitment to ensure that the error was made because of the activation of PBET. Then I get that if I add a position to the funds reservation and I use this position in a funds precommitment, I get FI_E050 too. I use the same dates that you can find in the first post.
On the other hand CB Period-Based Encumbrance Tracking is active for value type 80, 81, 82 and 83 (and 65). I suppose this is active because of the profile.
Please, if you need more info I can send you and image of the RFFMMONI.
Thank you very much in advance.
Kind regards -
How to find Last Payment date for vendor
Hi,
I am working on ALV Vendor report details.
1) How to find the last payment date for the vendor.
2) In input paramter field
PARAMETERS: L_FILE LIKE RLGRAP-FILENAME.
I want to validate the user input in the selction screen for downloading the file in the presentation server..
what is the validation I have to write for the path name.
pl help me give details.
Thanks in advance.
sharma1) use table REGUH field ZALDT or VALUT
2) use fm like EPS_GET_FILE_ATTRIBUTES
A. -
Last payment date shown in credit master sheet is wrong.
Hi,
The last payment date and amount in the credit master sheet S_ALR_87012218 does not reflect the true last payment info. As per the payment history list, there have been more recent last payments after the last payment date shown on the credit master sheet, however i dont know why the actual last payment info is not being shown on the credit master sheet.
Can someone help?Hi
When running credit master sheet make sure you are looking into correct credit control area where the payment has been entered. I am sure to update credit master sheet you do not need to run any program, this report updates figure online (at the same time). If you want to make sure its working take any customer having outstanding invoice on account. Make entry using transaction F-28, go back to credit mast sheet correct credti contrl area and you will be able to see updated amount.
I don`t know what t.code you are using to do incoming payment entery? Balance will not be updated properly in the reports if you are using wrong posting keys. Posting Key should be 15 inorder to update correct balance on customer report.
Hope this will help -
How to reflect a new field in Bank data while making payment through F-53?
Hello Experts,
How can i reflect a new field (payment reference) in bank data while making payment through F-53?
I have tried to do it by Field status group(OBC4) but the same is replicating in vendor invoice but not in vendor payment.
I tried it at both level,fsg anf posting key,But no use.
Is there any other process to make available and required field in BANK DATA of vendor payment?
Please suggest .
Regards,
Sumeya offrinHello Sumeya,
Please consider note 145864 which explains what you have to do to
make this field visible in your selection criteria:
"In Transaction FB00 (Financial Accounting Editing Options -> Open items
activate the flag 'Payment reference as selection criterion'.
This is valid for incoming payment; please test if the same procedure
is valid for outgoing payment as well.
I check the issue, and unfortunately these function seems to not be supported for vendor open items.
When you try to select the 'Payment Reference' in Additional selections
the following messages is arised:
'No account specified, items selected via document no. or reference'
That means,when you do not specify an account in F-53 you can only
via Reference and/or document. This is not a bug but system design.
For additional reference you can check the note 451105.
The note made clear that the specification of an account is required for vendors during the selection via payment
reference.
Kind Regards,
Fernando Evangelista -
Baseline date change OBB8- payment terms
Hi
Is it ok to change the baseline date in a payment term in OBB8 after posting several invoices? What consequesnces should this change have?
Thanks in advance
AparnaThis will effect for the all pending invocies. The effect could be change in the payment schedule for the vendors.
Maybe you are looking for
-
No Data Found when Sum in Report is checked?
Does anyone have an Idea why ora-1403 error occurs when you select sum a numeric column in report? It goes away when I deselect it. I have run several reports and this is the first time I experienced this in version 2.0.
-
Regd Sender Communication channel
Hi all, I have configured a sender communication channel for picking a file. Everything looks fine to me, but the file is not getting picked up. I checked in RWB for channel, channel is configured fine.its says processing started, and processing fin
-
Ok here I go While I was deployed my kids managed to crashed my Laptop HP Paviion dv7 Notebook PC, Factory installed OS: Vista, I don't have a recovery disk and when I run the test for the memory and hardrive I get an error #10008 to replace HArd Dis
-
How do I configure TC and Apple TV?
Hi, I just installed my Time Capsule and managed to make it work as a router, using my previous network and only by WiFi connection (it is not hooked up by ethernet). Now, TM wont find my TC... I have rebooted my Mac several times to no use. Also I h
-
Dear BW Expert, We have argument about PC load data by manual For the first time, I have change data selection in infopackage, then save and run the Process chain. When my PC not running finish, the one colleague have change data selection of infop