No puedo instalar pages en mi All in One

Cada vez que intento instalar éste programa en mi nueva All in One, me dice ¨Hash mismatch¨, que significa èsto y que debo hacer?

Dudo que funcione. 10,5 utiliza iDisk diferente. Si usted hace esto, añadir ". Dmg" no "sparseimage '.
Yo esperaría que la imagen sea dentro de la carpeta. Si no puede abrir la carpeta no puede ser capaz de hacer esto.

Similar Messages

Spilled Liquid on my All-in-one.

I tipped a glass of juice on my HP PhotosmartC3140 All-in-one. At first I didn't think I spilled that much but then all the lights starte flashing. I turned it off and tried to dry it ff as best I could. But now, whenever I turn it on, the lights keep flashing and doesn't respond when I press any buttons. Even hooked to the computer, it says it's off line or has been deleted.
Is it totally dead? Will it eventually dry out and go back to working or is there anything I can do? I really like it and the lime green color.

Hi,
Oops... electronics and liquid... not a good combination.
There might be a couple of things to try. I went to the product support page for the All-in-One and found a Blinking Lights documents.
Blinking Lights
Although your situation is different, there may be some steps to try. It is possible during the cleaning up that the "faceplate" could have been dislodged. There are steps to make sure the faceplate is on correctly. There are steps to reset the product. You might even try to remove a cartridge, power down the AiO via reset procedures, power back up without the cartridge, and then see if different light scenario comes up. Hopefully, the insert cartridge scenario comes up.
If you are able to resolve the blinking lights and get it to print an alignment page from the printer and the computer still doesnt' recognize the printer. Try uninstalling and reinstalling the printer.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

No puedo instalar ibooks 3 en mi IOS 4.2.1

tengo un ipod touch 2 generacion y por mas que he intentado no puedo instalar ibooks ni ninguna aplicacion para leer mis libros porque es obsoleto ya el sistema que tiene, la version es 4.2.1 y siempre me dice que es incompatible, como puedo y donde descargarla.

using http://translate.google.com
Sólo la versión actual de cada aplicación está disponible en la tienda, y todas las aplicaciones están vinculadas a la cuenta que descargó. Así que para poder instalar iBooks (o cualquier otra aplicación) en tu iPod tendrá que han descargado, y aún así tener un lugar, una versión de la aplicación que es compatible con iOS 4.2 - no hay otro lugar para descargarlo.
Only the current version of each app is available in the store, and all apps are tied to the account that downloaded it. So to be able to install iBooks (or any other app) on your iPod you will need to have downloaded, and still have somewhere, a version of the app that was compatible with iOS 4.2 - there is no other place to download it from.

¿Puedo instalar Mavericks o Montain Lion en un Macbook Blanco del 2010?

¿Puedo instalar Mavericks o Montain Lion en un Macbook Blanco del 2010?
Al intentar descargarlo me aparece el mensaje "El sistema OS X Mavericks no se puede instalar en este ordenador.", pero no especifica el motivo concreto.
No hay ningún modo de instalar una version más actualizada de OS X que Snow Leopard en este equipo?

Mavericks requires a MacBook (13-inch Aluminum, Late 2008) or (13-inch, Early 2009 or later). Your’s is from 2010 so it should support Mavericks.
Before you attempt to install any version of OS X make sure your disk is healthy and make sure you have a backup.
Run disk diagnostics with Disk Utility. Look in the Applications/Utilities folder and run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up.
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
==========
Mavericks requiere un MacBook (de aluminio de 13 pulgadas, finales de 2008) o (13 pulgadas, principios de 2009 o posterior). Tu es a partir de 2010 por lo que debería apoyar Mavericks.
Antes de intentar instalar cualquier versión de OS X asegurarse de que su disco es saludable y asegúrese de tener una copia de seguridad.
El diagnóstico de disco correr con la Utilidad de Discos. Busque en la carpeta Aplicaciones / Utilidades y ejecute la Utilidad de Discos. Haga clic en el icono del disco superior izquierda. ¿El S.M.A.R.T. estado aparece "Verificado"? Si no es el disco / SSD no es saludable y debe ser reemplazado. Haga clic en el icono de sangría debajo, generalmente llamado "Macintosh HD" y Verificar disco. Si termina con un mensaje verde "OK", entonces todo está bien con el disco. Si muestra los errores en rojo, entonces usted ha encontrado un problema a abordar una vez que el sistema está respaldado.
Conceptos básicos de Time Machine: http://support.apple.com/kb/ht1427
Más comúnmente utilizado métodos de copia de seguridad:
https://discussions.apple.com/docs/DOC-3045

NO puedo instalar iDisk en mi iMac...

NO puedo instalar iDisk en mi iMac, aparece una carpeta con este nombre "iDisk local anterior de gfrances", al intentar abrirlo da el siguiente mensaje: "sistema de archivos que no puede montarse". Allí tengo varias carpetas importantes que necesito.

Dudo que funcione. 10,5 utiliza iDisk diferente. Si usted hace esto, añadir ". Dmg" no "sparseimage '.
Yo esperaría que la imagen sea dentro de la carpeta. Si no puede abrir la carpeta no puede ser capaz de hacer esto.

No puedo instalar ilustrador

no puedo instalar ilustrador en mi compu y ya la pague

Adriano,
You may have a look at the system requirements and see whether your computer meets them.
http://helpx.adobe.com/illustrator/system-requirements.html
You may also try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

No puedo instalar programas

compre el paquete anual de pago mensual de creative cloud, pero cuando se está bajando el programa mas omenos al 43% me dice error y no puedo instalar ningun programa, ya desinstale e instale y sigue igual, hice una limpieza de archivos con el limpiador de adobe y aun sigue, alguna idea de lo que pueda suceder y solucionarlo, me urge instalar los programas.

Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Puedo instalar en macbook pro 5.5 ssd sata 3?

puedo instalar en macbook pro 5.5 ssd sata 3?

Chris Lo wrote:
Also if I took it into an apple store to get installed how much would it cost? Any ideas?
Hi Chris,
I am not aware of any compatibility issues between that SSD and your machine. I've purchased a couple of their SSD drives and the install was quick and easy. Although I haven't installed one of their drives into the MBP 5,1 (Late 2008), I have installed SSDs and normal SATA drives into the same body style and there's been significant reworking between the models that I've come across. Just make sure you have the appropriate tool for the drive screws and you'll be all set.
Regarding the install, the Apple Store will not install 3rd party components into your machine. Nor do they sell HDs that they will install. Apple will only install the RAM you buy there or replace parts as a result of a service.

Hp all-in One remote prints test page but cannot find printer for anything else

The HP All-in-One application can print test pages on my 8610 but when I go to any document or photo and try to print I get the following message "This Printer is not available." I have checked and have the latest version of the HP All-in-one Printer Remote application and the HP Print Service Plugin applications from the Google Play store. I am using a Samsung Galaxy 5 running Android 5.0. If I print a page from my laptop using wireless to this printer, I can see the All-in-One application tracking my printer status so I know it can see the printer. The app on the phone will show the status under the printer name going from Ready to Unavailable to Ready as a document is printed and then finished. I am printing directly with local WIFI and am not using the ePrint feature.

Hello , Welcome to the HP Forums!
I hope you have a pleasant experience here. I'd like to help you with the issues you are having printing from your Samsung Galaxy S5 to your HP Officejet Pro 8610 e-All-in-One printer. Firstly, do you have the printer plugged directly into a wall outlet? The printer has a power moderator built in, so if it is plugged into a power surge bar or battery backup it may be getting inconsistent power. This can cause all kinds of firmware glitches (like the printer status not being broadcast properly). If that doesn't immediately resolve the issue, please follow the steps below: Network Power Reset: Let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection. Restore Network Defaults and Reconnect: 1. On the front panel of the printer, touch your wireless icon at the top2. Select Settings.3. Select Restore Network Defaults.4. Restart your printer.5. Once it's booted back up, touch the wireless icon again.6. Select Settings.7. Select Wireless Setup Wizard and follow the prompts to enter your wireless network details.8. Try enabling the web services again. Another thing I would suggest, would be to download the HP ePrint app, rather than the All-in-One Remote. The Remote is moreso suited for scanning to your phone from your product, so I would suggest trying the ePrint app (you can download it from the Play Store). If the issue persists after these steps, please answer the following questions so I'm better able to assist: Are you able to print reliably from any other devices on your network?What brand and model of router are you using?What is it that you are trying to print? (ie. E-mail, photo, document)What app are you printing from? (Some Android apps have a direct printing feature)I look forward to hearing back from you and working towards a resolution to this issue!Have a great weekend.

Scanning multiple pages with all in one printer using AiO software.

I have the HP all in one printer and when I scan a document even if I add a page, each page has its own PDF identification. I cannot seem to get multiple pages in one scan that I can email as one document. Please advise.

Hi Grwltgr
If you have an ADF(Automatic Document Feeder) tray keep all the pages you want to scan and start scan. All the scanned pages will be added in a single pdf.
If you dont have an ADF tray, i might be able to help you if you can let me know the Complete Model Name.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

Page numbers on ALL pages

I'm trying to insert page numbers on ALL pages in a document in InDesign CS4. But I can only get page numbers to the page 74? This is so annoying, and it's due on monday, and I'm running out of time. Can anybody tell me, short and easy, how I can get page numbers on every page in my document? (Besides the front page - but I know how to not get the page number there.)
Thanks!
Ingvild

Huh? Simply put, you place the page number marker in a text frame on your master page(s), and you ensure that one of those master pages is applied to all pages where you want a page number.
Is that what you've done? What is not working? Is it page 74 and higher that is a problem? Just page 74?
Does page 74 use a different master page that doesn't have the page number marker?
Or is your document corrupt? [Did you try exporting to IDML or INX and re-opening the export?]

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

I want to pare down my inbox mails. Can I delete more than one page of inbox multiple mails, e.g., all mails from an address that number in the hundreds, all at one time?

I only know to delete emails I want to discard, after search and finding hundreds, by the page (up to 50). How can I delete all at one time, to save me hours of tedious work?

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]

No puedo instalar pages en mi All in One

Similar Messages

Maybe you are looking for