No question at this time

Hello Sir,
My name is Mahendran and i am a CPQ expert. I will be able to help you as well. You can reach out to anyone of us. You didn't mention whether you are an Oracle Partner Network (OPN) member. Since most of these materials are available for your use in OPN website. Since i don't know the specific issues with SF.com integration, we have couple of options. I can coordinate various teams to get a response back to you or we can look into specific instructions how to upgrade your system to 2014 R1 release. Either way we would like to solve your current issues in most effective way. Please help us serve you. Get in touch with us!
Here are the some of the resources to get started on CPQ.
1. To Register as Partner (OPN):
http://www.oracle.com/partners/en/partner-with-oracle/get-started/index.html
2. CPQ Knowledge Zone:
http://www.oracle.com/partners/en/products/cloud-solutions/cpq-cloud/get-started/index.html
4. Implementation Materials (Integration/ Commerce, Configurator etc.):
Right now we have Yellow Belt/ Blue Belt Certifications offered from Oracle University to teach these.
http://education.oracle.com/pls/web_prod-plq-dad/ou_product_category.getPage?p_cat_id=448
Regards,
Mahendran

Similar Messages

Cursor cache - Time. what is this time

Administration -> manage session -> Cursor cache - > Time.
I have a question about this time?
I ran a report and viewed its log through(Administration -> manage session -> Cursor cache-> View Log) . This report had no previous cache entries, because I cleared them all.
The time shown for this report under (Administration -> manage session -> Cursor cache - > Time) says 18 seconds.
I am sure when I clicked on the tab that has this report it took less than 4 seconds for the page to load with this report on it.
So I wasn't sure what this time actually is? When I look into the log ( for this particular report), one of the line at the end of the log says
[2012-03-09T15:50:04.000+00:00] [OracleBIServerComponent] [TRACE:2] [USER-33] [] [ecid: d01cd216d41a2bc8:bf26dbb:13549056e05:-8000-00000000005b8cad] [tid: 44ded940] [requestid: 7ee0096] [sessionid: 7ee0000] [username: -2327690837] -------------------- Logical Query Summary Stats: Elapsed time 23, Response time 18, Compilation time 1 (seconds) [[
But the report gave back results surely in less than 18 seconds, so what this time indicates?

Hi I had this on my bank statement too. I believe TCCP stands for Town Centre Car Parks. I parked near the Royal Armouries for several hours which cost me £10. If it had said carpark on my statement it would have saved me a lot of exploring on google as I, like you had forgotten what the charge was for. Hope this helps.
The carparks run by TCCP are as follows and you may have visited one of them and payed by debit card:
Merrion Centre & First Direct Leeds Arena
Templar Street & Edward Street, Leeds
7 Whitehall Road, Leeds
9 Whitehall Road, Leeds
Clarence Dock, Leeds
1 Port Street, Manchester
33 Tariff Street, Manchester
30 Tariff Street, Manchester
21 Ducie Street, Manchester
75 Dale Street, Manchester

When activating adobe flash "this time", I have to click twice unnecessarily

For security reasons, I have set the flash plugin to "ask every time" (or similar - I am using the German version).
Now, after I have clicked to activate flash, I am asked a second question "Activate this time" or "Activate for good" .
This alternative should be integrated in the first "question" - which should not ask "Activate flash", but ask "Activate flash this time only" or "Activate flash for good".

If your version of Firefox works the same as mine, if you click a link in the page to activate a plugin, Firefox drops down a dialog from the plugin notification icon in the address bar. I think it was designed this way so users would learn to look for icon and use it to activate or block plugins. But like you, I don't always remember to do it that way.
If you want to suggest that the in-page dialog be changed to have those choices, you can submit your suggestion on the feedback site (feature change suggestions tend to get buried here among the crashes and other support issues).
https://input.mozilla.org/feedback

I have 2 questions (1 every time i open my e-mail it asked me to sign it did not do this before (2 how can i increase the font size and make it defalt

question (1 every time i go into my e-mail i need to sign in i did not have to do this before please correct this sign in page
(2 how can i keep my font size to 12.
thank you joe ruda

(1) Web site requires you to sign in each time
Web sites generally remember your browser by a cookie they set.
If you have changed your cookie settings (for example, by clearing them using Clear Private Data when you close the browser) or installed new third party software (security suite, system cleaner, etc.), you might be clearing the site's cookie.
In some cases, it's possible that cookies can become corrupted. To clear the site's cookies, when viewing the site:
"right-click" (Mac equivalent!) and choose View Page Info > Security > "View Cookies"
In that dialog, you can remove the cookies. After reloading the page, you should be required to log in again and the site will create new cookies.
(2) Remember font size setting
Are you using a feature of your email site to increase the font? If the site can't remember that for you, then there might be an indirect solution (a hack) to fix it. Which webmail site is it? There might be a userscript available.
If you mean Firefox's zoom setting, then Firefox should remember that between visits.

When i connect my iphone 3Gs to itunes in my computer they say, they have an update for my iphone ios 5 to ios 6.1, this is the message that apear in my itunes, We're sorry, we are unable to continue with your activation at this time.Ask your question.

when i connect my iphone 3Gs to itunes in my computer they say, they have an update for my iphone ios 5 to ios 6.1, this is the message that apear in my itunes, We're sorry, we are unable to continue with your activation at this time.Ask your question. what should i do for now for iphone didnt activate of itunes?

Ask the person who owns the iPhone.
Which version of Cydia appears on the iPhone - the one
with the black and white icon or a different one?
If it was jailbroken, contact the developers of the jailbreak.
Not all jailbreaks can be completely removed.
Google may provide some direction.

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

ok, I see you posted parts of your VI in a different location. There is a sub-VI missing though ( Spline Interpolate.vi). But I re-constructed your data and can see the following things:
1 - Your signal has a significant DC-offset (approximatelly 1000) and this will result in a power value for DC of approximatelly 10E6 (though you wrote 10E8 in your first posting).
2 - If you ignore that DC, you can see on the time signal that there is another signal at very low frequency (order of magnitude amplitude = 10, power spectrum around bin 1 = 100) and you are not capturing an entire period of that signal, so either a measurement time of 300 seconds is not enough or this is a signal caused by a drift that you want to ignore.
But overall there is not much sign
al left once you remove your DC and eventually the very low frequency signal. But given your input signal, the power spectrum looks right. Remember also that the DC component will be replicated (with 6 dB reduction) on bin 1 when you apply a Hanning window. Try eventually without the Hanning window (but you'll still have to ignore your DC bin). Alternatively subtract the dc value from your time signal before computing your power spectrum.

Another Boot Camp Question (Internet Security this time)

Still doing my "homework" to prepare to install Windows (I will be using Vista Ultimate for awhile to start).
I've been reading a bit here about how Windows can be vunerable just by being connected online.
My routher does have the firewall on, and I'm also looking at a few security suites (mainly Norton IS 2009 and Kaspersky). Feel free to chime in with recommendations for or against, but my main question is this:
I assume after installing windows it will update itself. Should I install Windows without being connected, then install a security suite, then reconnect to do updates and registrations, etc? Is there a recommended procedure for that based on anyone's experience?
Thank you.

*My NewOsProcedure before iNet connect*
When you ask youself "In whose best interest is the continuing existance of viruses", the answer is companies who sell Anti Virus software. To protect my access to internet content made possible by software written & constantly being security updated by Microsoft with a second/third party's software is absurd. You don't have to agree with this or believe me saying that I've never suffered for not using one.
In Windows 7 I admit to missing use of free online One Care mostly for Registry cleaning which I would only trust to Microsoft. Also miss XP Sysintenals utilities that scanned for rootkit & defragmented the registry
although "Autoruns" still works in W 7 to show things loaded that would otherwise be unknown.
Windows on first start up leaves you vulnerable to some extent unless you close the holes.
1)Right click Computer icon Desktop->Properties->Advanced System settings
->Remote Tab Disable Remote assistance, make sure Remote desktop is not selected.
2)From Control Panel->Windows Firewall off by default in earlier releases, differs in windows 7 but be sure that it is turned on. In W 7, using a router I have Home Net blocking everything and Public more open allowing only Core networking element. Disabling Messenger, iTunes Media player as they turn themselves on, does not prevent them from performing acceptably unless perhaps you are sharing media.
3) In Network connections properties, I retain only Client for MS networks which can be unchecked, QOS Packet Sch, IP 6 & IP 4 and disable items in the "Sharing Tab" which may be new with W 7.
4) Right click Computer icon Desktop->Manage->Services&Apps->Services -
Depending on whether you are sharing, using remote desktop, wireless, things I'm not into, these are services that I disable (Some may not be on pre
W 7:)
Bluetooth, Branch Cache, Computer Browser, Home Group, Internet connection Sharing, iPod, Media Center Extender, Net.Tcp Port Sharing, Offline Files, Peer anything, PNRP machine name pulication, Remote Access Conn..., Remote Destop (all), Remote Registry, Routing & Remote access, Secondary Logon, Server, Smart Card, Tablet PC, UPNP device host, Windows Biometric, Wind. Card space, Windows Connect Now, Windows M. Player Sharing, Windows Remote Mgmt, Windows Search (this is personal, I disable drive indexing as well etc. I've seen that Ms. has included *Wolfram Alpha in Bing. *Who's gonna bother arguing with a MacArthur Genius if he suggests that the Universe is a giant computer? ), WinHTTP web Proxy..,WLan AutoConfig and WWAN AutoConfig. In Services, you do not want to disable anything critical to OS start up.

HT5642 Unable to download app this time error while downloading app please help!!!

when i download some app from apps store i get the following error
"Unable to download app this time error while downloading app" please help!!!
i ve tried these Things but
didnt workout yet
1) i tried hard reset
2)i tried logout/login Itune & appstore
3)Connected to pc and rest setting Network and Full Rest
all of no use... i dont want to update my softwre from IOS 6.0
Plx help!1

Hey Prahaladvatsan,
Thanks for the question. If I understand correctly, there is a blank app icon on the home screen. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

I can't post to forums! - Except this time, obvioulsy

I cannot get the website forums to work properly anymore. I have tried on four different computers including one from a different location entirely. I also created an entirely different identity and it still doesn't work. If I go to log in, it logs me in and shows my personal info, allows changes to my password, whatever. During the entire time I am in forums the top of the page says “Welcome, always frustrated” (that’s my user name). When I go to a forum question I posted a couple of weeks ago, I can view it, but I cannot reply and a "reply" option does not appear anywhere. It does say “logon/register” but that link takes you to a page that never loads. The same thing happens if I try to start a new discussion. This has gone on for a couple of weeks. After numerous trys, I thought I would try again this morning. Some how I got through this time. Can anyone help? (by the way, I may not be able to reply to this since I might not be able to post again).

As you noted, the forums have a separate login link that is under the black Forums banner on the left side of the screen. Is that the link/page that never loads? That page is at adobe.com and is not within the forums. Have you tried clearing out cookies from adobe.com and forums.adobe.com? Clearing the browser cache? It isn’t a common error and I can’t see anything wrong from the forums side of things.
Let us know if you do get back in to reply to this. If you cannot get in send a note to userforum at adobe dot com and I’ll send this off to the Adobe membership folks to see if they find any errors in your Adobe IDs. I do see both of your accounts and will send them info on both.
Thanks!

Movie download failure - "could not be downloaded at this time."

I purchased an HD movie in the iTunes store for my Ipad 2. I am intending to take the movie on a trip and need it downloaded to the Ipad, but I get the message "{Movie} could not be downloaded at this time." I waited 12 hours and tried again, still no luck. None of the other posts in Support seem to have directly answered this question - is there some reason this movie won't work on Ipad 2? And if not, how do you get a refund on the purchase?

Hello Stanley,
Thank you for providing details about the issue you are experiencing with the App Store.
The first thing I recommend is quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the App Store, I recommend restarting your phone and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

Unable to purchase! cm hd and 12 other items could not be purchased at this time, please try again later!

Hi everyone!
It says: Crazy Moto HD and 12 other items could not be purchased at this time, please try again later!
I even searched here and found a solution for the same problem by signing out from the account, closing open apps and reseting
The device, but this could not solve my problem! I am having the problem for over a month!
Any new solutions, thanks!

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
 Cheers, Tom

Im trying to set my ipad back to its factory settings and in doing so Itunes seems to be unable to activate it. It says "We're sorry, we are unable to continue with your activation at this time" which makes no complete sense to me. Any thoughts?

I recently got this Ipad2 in hopes for a working device. I had originally stated it up by syncing it on my sisters pc but by doing so the app store on the Ipad automatically gave me her husbands Apple ID instead of my own. I'm well aware that by syncing with her Itunes library something like this may have come as a result of it. So, I took it home and tried reseting it to its factory settings so that I was able to put up my own Apple ID and download some fun and helpful apps. I connected it to my notebook and had Itunes reset it which made it download something that took more than half an hour to do. It had told me that once it was done downloading this it would automaticlly set the Ipad back to its original state. It did no such thing. Now im trying to start the thing up and Itunes keeps telling me its unable to do so at this time. If you have had a similar situation and know of a possible solution please respond to my question. Much appreciated.

Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

How to effectively ask a question on this forum

Ok, so this'll take a little explaining. I was kinda bored over my lunch break, so i decided I'd write a general reference for how to post well on this forum. I realize that many people aren't gonna read this the first time they post, but i thought it would be a good thing to reference when replying to people who post a poor question.
_10 Ways to Post a Good Question on this Forum_
_1) Write a descriptive subject line_
This is the first thing that people see, and it influences how they read a question. Subjects like "Java error" tell people nothing about your problem. Subjects like "How to implement a SAX parser for use in multiple classes" are infinitely more useful.
_2) Don't use phrases such as URGENT or HELP ME!!! or IT'S DUE IN AN HOUR!!!!_
The people on this forum don't have the same priorities as you, and therefore don't care if your problem is urgent. In fact, they find it rude to assert that your problem should be solved before somebody else's just because you procrastinated. They also don't pleas for help too fondly. Typically posters who write this sort of phrase in their post has given up and become helpless, making it very difficult to guide them to the answer. Also, keep the caps lock off. THERE IS NOTHING MORE ANNOYING THAN ALL-CAPS POSTS. IT SEEMS LIKE YOU ARE YELLING, and people will make you aware of how it annoys them.
_3) Dont post your homework assignments asking for "teh codez"_
You will get flamed like none other for this sort of question. You may get codes, but when you submit them to your instructor, you may get suspended or expelled (depending on your school's cheating policy). The people on this forum are more advanced than you in Java, and can make it painfully obvious to your instructor that you cheated.
_4) Write in normal English_
Think of this forum as your supervisor or instructor, you want to sound professional and convey your question effectively. SMS speak or any other sort of abbreviation of the English language becomes difficult to read, and many people on this forum won't even try. This forum is filled with professionals in the Java world, and they are accustomed to reading true English (full sentences).
_5) Don't be helpless_
This forum is here mainly to help with specific problems, not to teach you Java. If you don't know where to start, a person is most likely going to tell you to write the solution out on paper first, breaking it down into small steps that can be accomplished by the computer.
_6) Do your research_
Many of the questions posted can be solved with a quick Google search. You should check a few places before you even post a question. They include: this forum (do a forum search), Google (do a Google search), the API's (http://java.sun.com/j2se/1.5.0/docs/api/), and the Java Tutorials(http://java.sun.com/docs/books/tutorial/)
_7) Post code and errors with your question_
The answer to your problem is in the error messages and the code. Instead of asking a general question about for loops, post the code that you have written and the error info that you get. When asking a question it is IMPERATIVE that you have tried to do it your own way, because the people on the forum mostly won't do it for you, they'll only point out where you have done it wrong and try to help you fix it. Don't paraphrase your error messages, because there are subtleties in the actual messages that you may unknowingly edit out.
_8) Don't Multi-post_
It is rude to post the same question multiple times or in multiple places in the this forum. This is for the same reason as #2, it makes it seem that you think your problem is more urgent or important than others' problems.
_9) Don't resurrect dead threads_
If a thread is 3 years old, nobody is going to remember it, so make a new thread to ask your question. If you have a question about something in the old thread, reference it through a hyperlink.
_10) Take it easy_
As long as the people in the forum see that you're legitimately trying to help yourself, they'll help you as much as they see fit. The biggest problem that newbies have is they rely on the forum to spoonfeed them the info, and it's not going to happen. They'll either get flamed or ignored. The people on the forum aren't trying to find "fresh meat to flame", they legitimately want to help you, and they'll typically give you fair warning if you're doing something annoying or unorthodox.

There does seem to be a way to sticky posts, but I think only mods and admins have the power to do it. There's one over on the Generics forum : http://forum.java.sun.com/forum.jspa?forumID=316
I've been trying to add a pseudo-signature to my posts as far as possible, with a link to a page which pretty much covers this stuff, only it's on JavaRanch:
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
But I've had a couple of occasions where the OPs thought it was directed at them and they got a tad upset :)
And without hyperlinks, I'm not quite sure how many people actually take the pains to go to that page.
Ah well, no one can say I didn't try.

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHz

Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

No question at this time

Similar Messages

Maybe you are looking for