No record updated in REGUT.

Hi All,
When i run F110 successfully and then go to DME the table REGUH is getting updated but REGUT doess contain the relevant entries. So I get the msg. 'No records found in FDTA. Kindly guide.'
Edited by: Vinda bailwar on Apr 24, 2011 8:46 AM

Dear Prathima,
I followed the information given in the link. But when i go to se38 and execute the program SAPFPAYM with a variant I get dump function at FI_PAYMEDIUM_ACH_00. It is an event module in the format defined by me. Do i need to use it. As far as i remember i did not add it. You will get to see these event modules in create payment media formats. I think there is some in consistentancy in my setting but where I am going wrong I don't know.
If i have to (compulsorily) use this event module how do i use it.
Thanks in advance

Similar Messages

Equipment master record updation in Asset master record

Dear Friends,
I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
Thanks,
Dwarak.

Hi,
Thanks a lot for your reply.
I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
Thanks
Dwarak.

Conditionally disabling record updation after query

Dear members
I've a single record block and I wanna conditionaly disable records updation after query has fetched data. Problem is that if I disable the record updation in Post-Query trigger then it checks the condition for the very first fetched record and it the condition is true, then Updation is disabled for all the fetched records, even if the next records dont meet the condition. I'm using forms-10g. Can u give a better solution??? thanx.

you have to use SET_ITEM_INSTANCE_PROPERTY to modify only one record:
BEGIN
    IF ... <your_condition> THEN
        SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_FALSE);
    ELSE
        SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_TRUE);
    END IF;
END;

PO without Info record Updation

Dear All,
I hope you all are fine and this is my first message to this forum.
We have a client specific requirement and in that client wants PO without Info Record updation. Info record will be there but for Material and Vendor only not for Price.
The situation is when we create a PO, the Price will not be pick up from Info Record conditions and from last PO Price.Means we have to manually enter the price and the info record will not be updated for price and cleint's other requirement is in the info record Order price history is not to be updated when any PO is created.
Please let me know the steps if anyone works on this issue.
Havea good day
Regards
Lovkesh

Hi Lovkesh,
First of all dont create a info record manually.
Just go a PO with inforecord indicator turned on.
this will make a info record to be created automatically by the system when u post the PO.
this inforecord will be with or w/o plant depending on the setting u specify in customizing under define condition control at plant level in SPRO.
then under customizing for buyer values select not to copy from the last purchasing document.
info record gets updated in 2 ways normally 1> from previous PO document 2> from conditions entered manually or if the info record update was turned on in any of the purchasing documents.
after blocking these 2 ways info record will not get updated.
also make sure in ur case for the material and vendor combination there exists any quotation or agreement orcontractbecause inforecord gets updated automatically if it is turned on(info update indicator) in these purchasing documents also----if any of these exists then select no update of inforecord in all of them.
reply me to get updated
raja.

Info record update check box in Po

Hi,
We are working in ECC 6.0 envirnmoment and our project is trying to explore the functionality of PIR. The problem is I am not able to see info record update check box in the material data tab of the PO. I did not get any configuration in SPRO to make that field visible/ invisible. Please help me to for making this field visible at the time of PO creation in transcaction code me21n.

HI Muttu,
SPRO>>MM>>Purchasing >> Purchase order>>Define Screen Layout at Document Level>> NBF>> Administrative data,
in that u can make display or optional or required entry
Check once again in ur Purchase order it may be display mode in ur PO
Regards
Pramod

Where is the Record Update Form Wizard in DWCC?

Trying to follow online help but it doesn't relate to DWCC. A tutorial I found for CS6 suggests that it's in Insert > Data Objects > Update Record > Record Update Form Wizard but in DWCC there is no "Data Objects" option in the Insert menu.
By the way, I'm looking for the wizard not the straight Update behaviour which I'm aware is in the Server Behaviours panel.
Thank you.
NJ
EDIT: Just spoke to Adobe "support" by chat about this and they were absolutely useless. The directed me to the article that I've highlighted above as being for CS6, which isn't helpful because "Data Objects" isn't in the Insert menu in DWCC, and when I pointed that out they gave me this link to try: http://www.adobe.com/devnet/
Seriously? Is this the best I can hope for from Adobe support? It was clear that the operative was just doing Google searches for the answers as opposed to actually knowing the software that they represent. Really disappointing support.

Hi Jon,
"Database functionality was removed from DWCC." - I use database functionality a lot so this is a real let down. Why has it been removed when it seems so integral to a lot of modern websites and web applications?
I've got the Legacy Extension, or Depracated_ServersBehaviours panel extension, but that does not bring back the Record Update Form Wizard.
Tutorials as far as CS6 reference the Record Update Form Wizard but I'm guessing that it has just been completely dropped in DWCC - not that anyone from Adobe know that one way or another. The official "support" I received earlier was a complete joke (some guy doing Google searches whilst saying - "I'm just verifying your account").
I'm quite handy with Google myself so maybe there's an opportunity for me to move into a career as an Adobe support technician.
I'll have to find a third party extension then I guess. Thanks for the advice.

Workflow - Checkout records for Record update

Hello,
I am creating a Record maintenance workflow which will be triggered automatically for "Record Updates". In the start step of the workflow, I am checking out the record and in the stop step, I am checking in the record. When the user updates a record and saves it, MDM is saving the record and launching the workflow which checks out the record. Is there a way to check out the record before the record is saved and still have the workflow trigger automatically? Is this something that can be done in SAP MDM or a product limitation??
Thanks.

Hi,
No we Cannot check out the records before it saved.
However we can trace the changes made in the records using Change Tracking Table .The Change Tracking table is an MDM system table with a predefined set of fields, and records that are not directly visible in either the MDM Console or the MDM Client. Each record is created automatically by MDM when the value of any field that you are tracking is changed, providing an audit log of changes within the system.
For each change, MDM records the date, the time, the user who made the change, the old value, and the new value.
The change tracking settings for the tables and fields are displayed in a hierarchy in the Name column in a grid within the Change Tracking Detail pane, as shown in the figure below. Each normal table is represented by an internal node and each of its fields by a leaf node. For each field, you can specify whether to track changes of the following types by selecting from the radio button grid control in the corresponding column:
·        Track Adds
track new field value when a record is added
·        Track Modifies
track old and new values when the field is modified
·        Track Deletes
track old field value when a record is deleted
For each type of change you can track, the setting of the root node of the Tables and Fields hierarchy determines the default setting for new tables added to the MDM repository. Similarly, for normal tables, the setting for each table node determines the default setting for new fields added to the table. Finally, the setting for each field node determines the actual setting for the field.
The list of fields includes the following virtual fields:
§         Field in the main table, which you can use to track changes to the attribute values of a taxonomy lookup field
§         in a taxonomy table, which you can use to track the following:
·         The addition of new attributes
·         The deletion of existing attributes
·         Changes to the attribute name
You can only change the settings for the Change Tracking table for an MDM repository that is mounted and unloaded.
You can change all the tables and fields to the same setting as a group by changing the default setting of the root node.
You can change all the fields of a table to the same setting as a group by changing the default setting of the table node.
I hope this helps u.
Regards
Nisha

Infor record update

hye
Purchasing Info record will be having the updated price.
How is the price in info record update, ie if i have not created the po for a month or so, but the price will be as last month but what is the case of material such as oil / fuel which may change hourly. how is that price updated in the infor record.
regards

Hi,
I dont think this will update directly as there is calculation schema from PO which brings up the net price gets updated in the inforecord
Check this out please it has good explanation :
Re: price updation in Info Record
Best regards,
Sridhar

In me21 I want to uncheck the checkbox 'info record update'.

In me21 I want to uncheck the checkbox 'info record update'. This checkbox is checked by default. How can I uncheck it?.

Hi,
    Goto SHD0 Tcode, give the Transaction name ME21N,
    Click on Screen Variant Tab,
    Give the
               Screen Variant Name : ZINFO
               Program : SAPLMEGUI
               Screen : 1319
   Click on Create, it will take to the Tcode,
   Give any Material no, click on Expand item, ignore any errors
   In Material Data Tab, Check the Info Record check box. Click on Back
   It will show the Screen variant which u selected with its values,
   Give short text and Exit and save, Again save, it will ask for pacakage.
Now goto Transaction variant, and look for the Standard variant used, add the created Screen variant to that standard variant. and activate.
Next time you open that Tcode it will defaultly checked.
Regards
Bala Krishna

BBP_GET_EXRATE - No records updated

Hi,
Our environment is SRM Server 5.5 with two R/3 backends.
We have executed the report BBP_GET_EXRATE for the first backend and it completed successfully copying the exchange rates. However when we executed the same report for the second backend the log says "No records updated".
Did anyone have experience this problem before? Can you please help?
Thanks

Hi,
FM LOAD_TCURR within BBP_GET_EXRATE is used to fill TCURR in SRM. It seems that all entries are deleted from TCURR and then the entries are filled again from the backend. So it seems to be not possible to get the exrates from different backends.
Take a look at the strange coding from FM LOAD_TCURR :
Load Exchange Rates table TCURR
TABLES: TCURR.
DATA: BEGIN OF ITAB_TCURR OCCURS 0.
      INCLUDE STRUCTURE TCURR.
DATA: END OF ITAB_TCURR.
delete all entries in table
   SELECT * FROM TCURR INTO ITAB_TCURR. <--- get existing entries
       APPEND ITAB_TCURR.
   ENDSELECT.
   LOOP AT ITAB_TCURR.
         DELETE FROM TCURR                            <--- delete them
           WHERE KURST = ITAB_TCURR-KURST
             AND FCURR = ITAB_TCURR-FCURR
             AND TCURR = ITAB_TCURR-TCURR
             AND GDATU = ITAB_TCURR-GDATU.
    ENDLOOP.
    LOOP AT E_T_TCURR.
       MOVE-CORRESPONDING E_T_TCURR TO TCURR. <--- fill TCURR again
       INSERT TCURR.
   ENDLOOP.

Display Records Updated While Updating Database

In my web application, an admin is allowed to login and do a mass update to a table where it could update several thousand records. These records are for when new fields are created and default values are created so that applications for older users are still able to process. Basically all I'm trying to do is display what the current status is of a database update in the form "xxx of yyyyy records updated."
The way it works is that the admin comes to the page, specifies the field to be inserted, and hits the update button. The application goes off to this action class which processes all the updates through JDBC. Once the updates are completed, the JSP is rendered saying how many records were updated. The problem is that this processing can take 15 minutes or more sometimes and we would like to be able to see the progress as it goes. It would be ideal to have it update after every 50 or 100 records are processed.
How can I do this while the action class is still executing?

Carpediem104 wrote:
I had read that thread and unfortunately, it wasn't entirely helpful. We don't use Struts and our action classes work a little bit differently. ... in that it takes only 2 parameters: HttpServletRequest and HttpServletResponse; there are no From objects passed in or action mappingsThen adapt. No one knows your system but you. There are examples in that page, and several links to other pages with several more examples.
Carpediem104 wrote:
. We also avoid using session variables, iframes, and beans. It will be hard to do without session variables.. And why no beans? Are you just talking EJBs or JavaBeans in general?
Carpediem104 wrote:
Perhaps it is still usable and I'm missing something, but I'm leaning more towards using AJAX to execute the action and then using request.setAttribute() every time the transaction is committed. Then I can use javascript to update the HTML.
But a request attribute can store information from one request to the next, which you will need to do to get the working progress.
One idea, provide a hook to the running process in ServletContext with unique keys to identify which process belongs to which update view. Then store the unique key in a cookie or as a URL parameter. Each submit (AJAX or not) use the ID to get the process out of the ServletContext and read the progress from there.
How is this better than a session? It isn't just more work.
The other option would be to use Pushlets. Pushlets use a servlet that never closes the connection to the client to continuously feed data to it. This way, your application would start a process and for doing the work and a Pushlet for displaying the progress. You pass a reference of the Pushlet to the worker and the worker regularly informs the Pushlet of its progress. The Pushlet then sends a javascript line to the client updating the display with new information.
If you Google Pushlets you will learn how to use them.
Edited by: Carpediem104 on Jul 29, 2008 9:19 AM

SQL Server runs update on one record, returns -1 records updated to java

I am trying to troubleshoot an issue in SQL Server. For all the databases in a specific server, the return value for java initiated update statements have completed the update (ie. I can go into SQL Server and verify the values have changed), but returned
a value of -1 records updated. I am not sure what went wrong to cause this to fail. It works on one server, but not on any databases on the other server and it suddenly changed on Friday, April 10. Here is the results of the java I am running.
Driver vendor: Microsoft JDBC Driver 4.0 for SQL Server
DriverVersion: 4.0.4621.201
dbproduct: Microsoft SQL Server
JavaPlus Connection Made: no warnings
Executing :update maxsequence set maxreserved = 401 where sequencename ='SERVERSESSIONSEQ' and maxreserved=400
Using TYPE_SCROLL_INSENSITIVE
Execute Returned -- (boolean) --- false
Execute getUpdateCount -- (num) -1
Execute took :0(15) secs.
Update/Deleted :-1 records.
Fetching/Updating took :0(0) secs.
I am runnning SQL Server 2012 and Windows 2012R2
Microsoft SQL Server Management Studio 11.0.2100.60
Microsoft Analysis Services Client Tools
11.0.2100.60
Microsoft Data Access Components (MDAC) 6.3.9600.16384
Microsoft MSXML 3.0 4.0 6.0
Microsoft Internet Explorer 9.11.9600.16518
Microsoft .NET Framework 4.0.30319.34011
Operating System 6.3.9600

Can you clarify why your Java output saying Execute Returned -- (boolean) --- false
I suspect this update never happened and it is possible to get updated row counts such as by using stored
procedure and returning @@ROWCOUNT value through return statement to the data set
Would you like to try this?
Good Luck! Please Mark This As Answer if it solved your issue. Please Vote This As Helpful if it helps to solve your issue

Valid Records Update, Reporting Possible (Request Green)

Hi, My company operates change run every night.
Yesterday, an error occured when loaded data from DSO to cube.
I guess that there was strange character BW can't recognize.
Because error had been handled too late, a whole chain was delayed.
I don't want that this situation happen again.
I want to skip the error records so that change run can be operated on schedule.
As I know, It is possible by using "Valid Records Update, Reporting Possible (Request Green)" option on DTP.
But, I heard that when I apply this option, there will be no error logs. Is it right?
I think It can cause the problem of data consistency.
So, I have question.
1. Can I get error logs using "Valid Records Update, Reporting Possible (Request Green)" option?
2. Is there any other way to know existence of invalid records (even if chain skip that record)
3. If question 1 or 2 are not possible, can an customizing abap program perform this action?
Thank you.

Hi,
can you discribe what's your master data check is like. Propably not your skip record exception is rissen but another exception by sap standard masterdata check. It's behviour may differ from the skip record exception you are expecting.
Check http://help.sap.com/saphelp_nw70/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm for other types of exception by SAP errorhandling.
Regards Michael

0ASSET_AFAB Errors - too many error records update terminated

too many error records update terminated -
It says too many error records as I have set an allowance of 10000 erroneous records in an attempt to get the transactional loads to work as they are dependant on this extracting successfully. This brought through over 10000 erroneous records.
Regards
Helpful answeres are surely rewarded

Hi Voodi / Sorabh,
Message Text: Too many error records - update Terminated
ID: RSM2
NO: 706
Message Text: Error in the update
ID: RSAR
ID: 119
Thanks in advance.

Send email when first record updated problem

Hi guys i have problem
this code send email based on timer every 5 minutes
it working ok but my problem i need to determine first rcord updated not inserted
and send email this is starting work
this is my code
---timer1_Tick---
Sales.SalesClass SalesClass1 = new Sales.SalesClass();
DataTable dt = SalesClass1.ShowSalesData("Data Source=192.168.1.5;Initial Catalog=Altawi-last06-01-2015;User ID=admin;Password=123");
dataGridView1.DataSource = dt;
dataGridView1.Refresh();
namespace Sales
class SalesClass
public DataTable ShowSalesData(string ConnectionString)
SqlConnection con = new SqlConnection(ConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.Connection = con;
cmd.CommandType = CommandType.Text;
cmd.CommandText = "showsales1";
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
DataSet ds = new DataSet();
da.Fill(ds);
DataTable dt = ds.Tables[0];
return dt;
SELECT     ROW_NUMBER() OVER (ORDER BY dbo.[Jeddah-Live$Sales Header].No_) AS [م], dbo.[Jeddah-Live$Sales Line].[Document No_] AS 'رقم الطلب',
dbo.[Jeddah-Live$Sales Header].[Bill-to Name] AS 'العميل', dbo.[Jeddah-Live$Sales Line].Area AS 'نوع الصبه', dbo.[Jeddah-Live$Sales Line].Description AS 'البيان',
dbo.[Jeddah-Live$Sales Header].[Pump No_] AS 'المضخه', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].Quantity, 0, 1) AS int) AS 'المطلوب',
CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Quantity Shipped], 0, 1) AS int) AS 'المصبوب', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Outstanding Quantity], 0,
1) AS int) AS 'المتبقى '
FROM         dbo.[Jeddah-Live$Sales Header] INNER JOIN
                      dbo.[Jeddah-Live$Sales Line] ON dbo.[Jeddah-Live$Sales Header].No_ = dbo.[Jeddah-Live$Sales Line].[Document No_] AND
                      dbo.[Jeddah-Live$Sales Header].[Sell-to Customer No_] = dbo.[Jeddah-Live$Sales Line].[Sell-to Customer No_]
The code above not have any problem and working
When first record updated send email
Example to show
orderno   quantity shipped quantity
12            20               0
13            30               0
14            25               0
15           22                0
suppose order no 14 shipped quantity updated be 10 (meaning 0 be 10
then send email with starting work
after this any updated to any record not send
no problem i dont need any send email code but how to get record updated first

Hi guys i have problem
this code send email based on timer every 5 minutes
it working ok but my problem i need to determine first rcord updated not inserted
and send email this is starting work
this is my code
---timer1_Tick---
Sales.SalesClass SalesClass1 = new Sales.SalesClass();
DataTable dt = SalesClass1.ShowSalesData("Data Source=192.168.1.5;Initial Catalog=Altawi-last06-01-2015;User ID=admin;Password=123");
dataGridView1.DataSource = dt;
dataGridView1.Refresh();
namespace Sales
class SalesClass
public DataTable ShowSalesData(string ConnectionString)
SqlConnection con = new SqlConnection(ConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.Connection = con;
cmd.CommandType = CommandType.Text;
cmd.CommandText = "showsales1";
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
DataSet ds = new DataSet();
da.Fill(ds);
DataTable dt = ds.Tables[0];
return dt;
SELECT     ROW_NUMBER() OVER (ORDER BY dbo.[Jeddah-Live$Sales Header].No_) AS [?], dbo.[Jeddah-Live$Sales Line].[Document No_] AS '??? ?????',
dbo.[Jeddah-Live$Sales Header].[Bill-to Name] AS '??????', dbo.[Jeddah-Live$Sales Line].Area AS '??? ?????', dbo.[Jeddah-Live$Sales Line].Description AS '??????',
dbo.[Jeddah-Live$Sales Header].[Pump No_] AS '??????', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].Quantity, 0, 1) AS int) AS '???????',
CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Quantity Shipped], 0, 1) AS int) AS '???????', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Outstanding Quantity], 0,
1) AS int) AS '??????? '
FROM         dbo.[Jeddah-Live$Sales Header] INNER JOIN
                      dbo.[Jeddah-Live$Sales Line] ON dbo.[Jeddah-Live$Sales Header].No_ = dbo.[Jeddah-Live$Sales Line].[Document No_] AND
                      dbo.[Jeddah-Live$Sales Header].[Sell-to Customer No_] = dbo.[Jeddah-Live$Sales Line].[Sell-to Customer No_]
The code above not have any problem and working
When first record updated send email
Example to show
orderno   quantity shipped quantity
12            20               0
13            30               0
14            25               0
15           22                0
suppose order no 14 shipped quantity updated be 10 (meaning 0 be 10
then send email with starting work
after this any updated to any record not send
no problem i dont need any send email code but how to get record updated first

No record updated in REGUT.

Similar Messages

Maybe you are looking for