"No records found" in many pages after CVS synchronization

Hi...
We have a very servere problem with UIX pages after synchronizing changes using CVS. We work in a 7 persons team anda every night we perform a synchronization in order to begin the day allways with the same project.
Unfurtunately we have found that many UIX pages made by our team mates can only be displayed correctly in the PC where that page was created. Eventhoug we all have the same files. We found that the person who created the pages can see them without a problem, but everyone else only see a "No records found" message in the page (this is when there are uix "read only tables" in the page).
We have all the entity objects in a package named "entity" and the view objects in one named "vo". So the xml file that rules thes objects are called "entity.xml" and "vo.xml". We all have exactly the same files (including the application module java and xml files) after the synchronization, and also know that in order to the app works fine we all have to add all "UIModel" configuration files in the ViewController project.
We also have tried using exactly the same ViewController.jpr and Model.jpr files that exist in the machine where it all works fine and the results are the same (the "no records found message" inside the tables).
Is there any known reason for this behaivor???
Are there other important files that we are missing in order to synchronize correctly???
I hope somebody can help us...
Thanks in advance...

Hi ,
Did you check-in and import into development and consolidation tabs?.If you already import ,they should appear.Did you define below standard scs as dependencies to SC in the created track?
APJTECHS - 7.00 SP18
SAPBUILDT - 7.00 SP18
SAPJEE - 7.00 SP18
BIUDI - 7.00 SP18
BIMMR - 7.00 SP18
SAPEU - 7.00 SP18
SAP CAF - 7.00 SP18
CAFKM/CAFMP - 7.00 SP18
Regards,
Koti Reddy

Similar Messages

Page Not Found in "wwv_flow" transitions after 3.1 upgrade

After upgrading to 3.1, apparently successfully (all our applications seem to run fine), we now can not use the development environment.
Any time you make a change which routes to the /pls/apex/wwv_flow.accept address we get a "Page not found" (404) error in IE.
This is occurring on our main production environment and did not occur with our prior test upgrades on other servers.
Although I found many "Page not found" errors searching the forum, I didn't find anything similar to the error we are encountering.
Thanks in advance for any feeedback or suggestions,
Barney
Message was edited by:
barneymattox
corrected title to wwv_flow from www_flow

Scott,
Okay, to start off with, let me apologize. I just realized I was going through the same sequence (at least once per a session, since sessions can survive Apache restarts).
From the looks of it, something on the specific page at the top of my first applications page list brings down the entire development environment.
Since it may indicate another issue (e.g. bug), I'll continue to go forward towards the specific cause:
So, the sequence that specifically causes the failure:
1) Login
2) Click on top Application (100)
3) Click on top Page (24) (due to view mode)
4) Click Edit Report Region (click on first region label on page) [Other steps may also cause, but this fails every time instantly]
5) Everything is now broken...
Exporting and importing the page does not change this behavior. However, knowing this I can easily work around the issue. Though I can continue to pursue this investigation to isolate the cause as needed.
[Edit: I've isolated the cause. The issue is with the Report Source for this top page. It was the last page editted before the upgrade. The report is a 5,594 character query. It worked in the 3.0 version, but if I start a new report page from scratch and try to use this query, I get the error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
<Return to Application>
And, once again, the development environment is trashed until you start your next session. Although 5,594 characters is large, I've had much larger in my career. I'm not certain if this is truly a size issue or relates to the number of bind variables, or some other aspect of the query. I'll investigate further tomorrow.]
Barney
Message was edited by:
barneymattox

After updating to 5.1, pages no longer lets me convert long, single page (up to 8 1/2 x 50) document to an 8 1/2 x 11 document with many pages.

I have been using pages to create a document that I always export in two ways. 1st, I export a single page document that contains all of the data (sometimes this can go as long as 8 1/2 x 50). I have to do this for web purposes. Next, I duplicate the document, and change the page setup to 8 1/2 x 11, turning it into a document with many pages. This is for printing purposes.
Before upgrading to Pages 5.1, this worked flawlessly. After the upgrade, when I change the document to 8 1/2 x 11, Pages just deletes all of the data after the 11'' mark.
I am trying to make it behave like it did before the upgrade: when I convert the document to 8 1/2 x 11, it just made as many new pages as necessary and didn't delete any of the data.
How can I do this?

Pages 5 is buggy and has had over 100 fetaures removed.
Pages '09 should still be in your Applications/iWork folder, use that.
Peter

After installing lion and updating to pages 4.1 cannot view my document content after I open the document. Shows how many pages I have and how many words in word count, but no words...

after installing lion and updating to pages 4.1 cannot view my document content after I open the document. Shows how many pages I have and how many words in word count, but no words...

Same problem. Tried reinstalling Pages. Didn't help. The behavior is like I am typing with a white font on a white background, but I am not.

Safari stops loading many pages: ../favicon.ico not found

Recently Safari doesn't complete the loading of many pages.
The status bar reads for example ... completed 34 of 35 items.
In some cases the page appears.
When I click a sub-topic on the page (i.e. in a forum) the link fails to load.
If I then click the stop/reload the selected link shows up, but fails to show the pictures (i.e. also incomplete)
In the activity window of Safari
http://www.......at/favicon.ico is listed as not found
Could there be a connection??
With Firefox these pages open without a problem.
My MacBookPro loads them without a problem using Safari over the same network.
I would appreciate your help.
Thanks,
TOM from Innsbruck
Dual 2.3 GHz Power PC G5 2GB DDR SDRAM Mac OS X (10.4.8) Airport Express to router to ADSL modem

Hello Starman!
Good news: Thank-you for the quick reply
Bad news: it didn't help.
I have tried most of the recommended tricks - trashing:
com.apple.Safari.plist and
com.apple.quicktime.plugin.preferences.plist
I have reinstalled Safari through the MacOSXUpdCombo10.4.8PPC.
I have tried both the Universal and the PPC version.
At the moment I am using the Universal 2.0.4 version.
There is no difference. The problems remain the same.
Any other suggestion?
Thanks,
TOM from Innsbruck
From the activity window (I added the unusual comments in the second column since they don't copy):
http://www.spur-1-team-mosel.de/Forum/index.php
:: 28 of 29 items
http://bilder27.parsimony.net/forum66083/amtn.jpg
http://bilder27.parsimony.net/forum66083/st.JPG
http://www.spur-1-team-mosel.de/favicon.ico
:: not found
http://www.spur-1-team-mosel.de/Forum/images/pixel.gif
http://www.spur-1-team-mosel.de/Forum/index.php
http://www.spur-1-team-mosel.de/Forum/wbb3/cellpic.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/icons/icon14.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/icons/icon16.gif
:: 0 bytes of ?
http://www.spur-1-team-mosel.de/Forum/wbb3/icons/icon2.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/icons/icon3.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/link.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/logo.jpg
http://www.spur-1-team-mosel.de/Forum/wbb3/minus.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/off.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/offclosed.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/on.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/online.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/stats.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_calendar.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_chat.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_database.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_faq.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_linklist.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_members.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_pms.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_search.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_start.gif
http://www.spur-1-team-mosel.de/Forum/wbb3/top_usercp.gif
http://www.spur-1-team-mosel.de/gtchat95/cgi-bin/chat.pl?template=roomusers_js
Dual 2.3 GHz Power PC G5 2GB DDR SDRAM Mac OS X (10.4.8) Airport Express to router to ADSL modem
G5 Mac OS X (10.4.8)
G5 Mac OS X (10.4.8)

New page after end of record

Hi i'm using asp.net 2.0,VS 2005 and CR by default comes with VS 2005.
I read the records from DB and bind into CR for 10 pages. It's displaying records at 10 pages but the 11th page has created and nothing is there. I dont want to create the extra page after records end.
How to solve this?

On crystal report, open the section expert. Go to the section that states "New Page After" and click on the X-2 button next to it". In the formula editor, type Not OnLastRecord. That will tell the report not to go to a new page on the last record.
Good Luck
Cathy

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

Display Invoice Page after Insert Record

I am new at this - so my aplogies - I am using Dreamweaver,
ASP and Access - I am doing a form registration page and upon
submit, the submitter is sent to a invoice page which contains some
of the data they just submitted. How do I cherry pick the record
that was just created on the previous registration page in order to
show some of it on the invoice page? I assume I will have to create
a variable from the value of one of the form fields on the
registration page, then use that to call the correct record on the
invoice page, but I have no idea how to do it in Dreamweaver, or
the syntax if I need to code it by hand. Any help would be greatly
appreciated. I have been stuck on this for over a day.

As part of the insert action define something from the form
that is likely
to be unique such as emailaddress, and assign it to a session
variable like
this
<%
session("svemail")=request.form("emailfield")
%>
Then on your invocie page simply filter the records by the
session variable,
and select the order to be in DESC order.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"BAPWEB" <[email protected]> wrote in
message
news:e6p2q5$lj6$[email protected]..
>I am new at this - so my aplogies - I am using
Dreamweaver, ASP and
>Access - I
> am doing a form registration page and upon submit, the
submitter is sent
> to a
> invoice page which contains some of the data they just
submitted. How do
> I
> cherry pick the record that was just created on the
previous registration
> page
> in order to show some of it on the invoice page? I
assume I will have to
> create a variable from the value of one of the form
fields on the
> registration
> page, then use that to call the correct record on the
invoice page, but I
> have
> no idea how to do it in Dreamweaver, or the syntax if I
need to code it by
> hand. Any help would be greatly appreciated. I have been
stuck on this
> for
> over a day.
>

To get mutiple records in a single page from oracle datbase to wordpad

I am writing procedure in oracle to export data into wordpad.
But each record is printing in seperate pages.
Also getting error invalid merge fileds... while exporting data.

hi Zaibi.. thanks for the reply ...
will tell u my procedure method ,
assigning variable ,for header ...and opening the text_io.fopen(data_file,'a')
if this is open than close that and
opening the text_io.fopen in write mode than put_line ... than wrinting the programming part and finally defining an another variable called record which contain s the data feilds THAN AGAIN PUT LINE THAT RECORD ...
AFTER THAT
CALLIN THIS
IF FileExists(Data_file) THEN
Word_Obj := OLE2.CREATE_OBJ('Word.Basic');
          word.command(Word_obj, 'AppShow');
          word.command(word_obj, 'AppMaximize', 1);
word.command(Word_obj, 'FileOpen', Letter_file);
word.command(Word_obj, 'MailMergeMainDocumentType', 0);
     word.command(Word_obj, 'MailMergeOpenDataSource', Data_file);
     word.command(Word_obj, 'MailMergeEditMainDocument', 0);
     word.command(Word_obj, 'MailMergeToPrinter');
     word.command(Word_obj, 'Fileexit', 2);
          OLE2.RELEASE_OBJ(Word_obj);
     end if;
BUT STILL GETTING SO MANY PAGES WITH DUMMY VALUES.
COULD U HELP ME OUT IN THIS ,

Duplicate records found while loading master data(very urgent)

Hi all,
One infopackage in the process chain failed while laoding the master data(full update).Its showing the following error-->duplicate record found ..1 record used in /BI0/PTCTQUERY and the same record occured in /BI0/PTCTQUERY tables.
can anyone give me the solution...its very urgent...
Thanks & Regards,
Manjula

Hi
You can see the check box in the Processing tab page. Make a tick mark for the check box Ignore Duplicate Data Records indicator . When multiple data records that have the same key are transferred, the last data record in the request is updated to BI. Any other data records in the request with the same key are ignored.
Help says that:
To maintain consistency, ignoring duplicate data records is only possible if the data is updated serially. A serial update is when data is first updated into the PSA then, after it has been successfully written to the PSA, it is updated into the master data or text tables of the InfoObject.
If a DataSource transfers potentially duplicate data records or if you manually set the Ignore Duplicate Data Records indicator, the PSA Only update type is automatically selected in the scheduler.
hope it clears ur doubt, otherwise let me know.
Regards
Kiran

Double sided printing, adding blank page after two different groups

Post Author: adepper
CA Forum: General
I have created a report that is structured as such:
Group 1 - Based on formula, groups by type
Group 2 - Based on formula, groups by use
Group 3 - use (pulled directly from Database)
Group 4 - ID
I have the report printing an extra page after group 3. I used this formula in the Section Expert - New Page After
remainder(pagenumber,2)=0
I also use that formula to reset the page number
What I would like to do is print a second blank page if group 2 does not start on the top of the page, meaning I do not want either group 3 or group 2 to start on the back of a page, so that this report can be placed in a binder, with dividers.
I have group 3 giving me a blank page with no issues, it is just group 2.
Any help and/or suggestions would be appreciated. If I did not give enough details, I am sorry.
Thanks!

Post Author: adepper
CA Forum: General
After a lot of blood, sweat and tears, not to mention a lot of curse words directed at the computer, I was able to get this to work. Now I just have to do it for three groupings instead of two (deliver the impossible to your bosses, and they turn around and move the brass ring right out of reach again!)
In case anyone is interested in how I was able to manage this (I found many sites where people asked this question, but not one complete answer), this is what I did:
In the footer section:
Group 4 - ID (database field)
Group 3 - PrimeUse (database field)
    3a - Contains data
    3b - Contains data
    3c - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for Reset Page Number After I also have this formula:
    remainder(pagenumber,2)=0
    3d - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for New Page After I have this formula:
    remainder(pagenumber,2)=0
Group 2 - Suppressed
Group 1 - Grouped by Store Type -
    1a - Suppressed, New Page After and Keep Together are all checked.
    1b - New Page After and Keep Together are checked. In the condition for New Page After I have to following formula:
    remainder(totalpagecount,2)=1
If anyone sees any errors, or if you think you can get it so that I get another page blank, after Group 1, if the Group starts on an even numbered page, I would appreciate the help.
Thanks!

Master Delta Load - Error "38 Duplicate records found"

Hi Guys,
In one of our delta uploads for a Master data we are getting error "38 Duplicate records found". I checked the PSA data but there were no duplicate records in that.
Once the data upload fails I manually update the failed packet and it goes fine.
Please any one have solution for this.

Hi
You can see the check box in the Processing tab page. Make a tick mark for the check box Ignore Duplicate Data Records indicator . When multiple data records that have the same key are transferred, the last data record in the request is updated to BI. Any other data records in the request with the same key are ignored.
Help says that:
To maintain consistency, ignoring duplicate data records is only possible if the data is updated serially. A serial update is when data is first updated into the PSA then, after it has been successfully written to the PSA, it is updated into the master data or text tables of the InfoObject.
If a DataSource transfers potentially duplicate data records or if you manually set the Ignore Duplicate Data Records indicator, the PSA Only update type is automatically selected in the scheduler.
hope it clears ur doubt, otherwise let me know.
u can see the same in my previous thread
Re: duplicate records found while loading master data(very urgent)
Regards
Kiran

No matching records found 'Queries' (OUQR) (ODBC-2028) [Message 138-183]

Hello All
I have created a SAP Business One addon in which I have created so many User menus Under 'Administration' , ' Sales A/R', 'Purchasing A/R' and New menu item under 'Modules'. All my program and menus are working fine. But after a certain time of period, when I press any of these menus, I am getting a SAP Status bar error message (RED) that 'No matching records found 'Queries' (OUQR) (ODBC-2028) [Message 138-183]'. Even after the menus are working fine. But I am receiveing this constantly.
I am getting this message even after closing my addon program. So I think this message is coming from SAP itself.
Any clue regarding this?
Anoop

Hi Anoop.....
I guess any of the queries has been removed from Query manager which is applied to the Marketing Docs as FMS......
Please check properly......
Regards,
Rahul

Can't change the master page after upgrading to SharePoint 2013.

After upgrading our farm to SharePoint 2013 we are having trouble changing the master page for sites that don't have sub-sites. We are still using the v4 UI version, and that appears to be what is causing the problem. The error we get when going to /_layouts/ChangeSiteMasterPage.aspx
is:
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaChromeSettingsPage.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I took a peek at the source code for AreaChromeSettingsPage.OnLoad and found that it references a CheckBox control that does not exist in the v4 ChangeSiteMasterPage.aspx:
protected override void OnLoad(EventArgs e)
base.OnLoad(e);
this.EnsureChildControls();
if (!this.Page.IsPostBack)
this.LoadValues();
if (base.Web.Webs.Count == 0)
this.resetSystemMasterPageSubSitesCheckBox.Visible = false;
this.resetSubSitesCheckBox.Visible = false;
this.resetAlternateCssSubSitesCheckBox.Visible = false;
this.resetThemeSubSitesCheckBox.Visible = false;
base.ConfigureCancelButton(this.BtnCancel);
If I manually add a checkbox control with the ID "resetThemeSubSitesCheckBox" to a hidden panel in the v4 copy of ChangeSiteMasterPage.aspx the page works, but obviously this is not a best practice. How can we fix this without upgrading the UI version, which
we are not yet ready to do?

Thanks Mike - Could you please share what is your next step then? I also have custom master pages and layout but I am going to make new master page and layout in 2013 as we need to change the existing branding too. so, i upgrade the site collection. I understand
the Look and Feel will not persist after the upgrade but I am concern that at least the page should show the content on the page after the upgrade. The page had Calendar webppart on it but after the upgrade it is coming blank.
any suggestion?
Regards,
Khushi
Khushi

Best way to refresh page after returning from task flow?

Hello -
(Using jdev 11g release 1)
What is the best way to refresh data in a page after navigating to and returning from a task flow with an isolated data control scope where that data is changed and commited to the database?
I have 2 bounded task flows: list-records-tf and edit-record-tf
Both use page fragments
list-records-tf has a list.jsff fragment and a task flow call to edit-record-tf
The list.jsff page has a table of records that a user can click on and a button which, when pressed, will pass control to the edit-record-tf call. (There are also set property listeners on the button to set values in the request that are used as parameters to edit-record-tf.)
The edit-record-tf always begins a new transaction and does not share data controls with the calling task flow. It consists of an application module call to set up the model according to the parameters passed in (edit record X or create new record Y or...etc.), a page fragment with a form to allow users to edit the record, and 2 different task flow returns for saving/cancelling the transaction.
Back to the question - when I change a record in the edit page, the changes do not show up on the list page until I requery the data set. What is the best way to get the list page to refresh itself automatically upon return from the edit-record-tf?
(If I ran the edit task flow in a popup dialog I could just use the return listener on the command component that launched the popup. But I don't want to run this in a dialog.)
Thank you for reading my question.

What if you have the bean which has refresh method as TF param? Call that method after you save the data. or use contextual event.

"No records found" in many pages after CVS synchronization

Similar Messages

Maybe you are looking for