After updating to 5.1, pages no longer lets me convert long, single page (up to 8 1/2 x 50) document to an 8 1/2 x 11 document with many pages.
I have been using pages to create a document that I always export in two ways. 1st, I export a single page document that contains all of the data (sometimes this can go as long as 8 1/2 x 50). I have to do this for web purposes. Next, I duplicate the document, and change the page setup to 8 1/2 x 11, turning it into a document with many pages. This is for printing purposes.
Before upgrading to Pages 5.1, this worked flawlessly. After the upgrade, when I change the document to 8 1/2 x 11, Pages just deletes all of the data after the 11'' mark.
I am trying to make it behave like it did before the upgrade: when I convert the document to 8 1/2 x 11, it just made as many new pages as necessary and didn't delete any of the data.
How can I do this?
Pages 5 is buggy and has had over 100 fetaures removed.
Pages '09 should still be in your Applications/iWork folder, use that.
Peter
Similar Messages
-
After updating to OSX 10.7.3, my search (spotlight) no longer works. Is there a fix for this?
Have you tried going to System Preferences > Spotlight > Privacy and dragging your hard drive into the box then drag it back. That will trigger a re-index.
-
After updating to the current versions of Adobe, I can no longer scan and send emails.
After updating to the current versions of adobe, I can no longer scan and send emails nor can I open an attachment upon receiving an email.
Capt Camo wrote:
After updating to the current versions of adobe...
What exactly is "adobe"? Adobe is the name of a company that has hundreds of software products, each with a distinct name.
You are posting in the Flash Player forum; do you really receive emails with Flash attachments?
Flash Player also cannot scan or send emails.
Finally you give no information regarding your operating system, email client, etc. -
after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?
I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk -
Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.
All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...
-
After updating my ipad 4 to iOS 7"0"3 I can no longer connect to my PC windows 7 fully updated USB machine. Please, I would appreciate
Iate any help. ThamksHere is something to try. Boot into the Recovery HD by holding
down Command+R when booting. Select the get help online option.
It initially opens Safari with a local web page, but you can use
the bookmarks on the bookmark bar or even enter a website.
Many extensions may not be available but it could tell you if
it is your Lion install that is a problem or perhaps a hardware
problem.
If you can browse around in this mode, then it could eliminate
any possible hardware issues. If you still have problems, then
the issue could possibly be hardware/driver related.
Give it a shot and see what happens. -
After updating Apple TV from 1.1 to 2.0, no longer shows up in iTunes 7.6
My Apple TV was working fine with sw ver 1.0 and then 1.1.
After updating it to sw ver 2.0, it no longer shows up in my
iTunes 7.6 on my Powermac, running the latest Tiger updates,
10.4.11
I've been following the trouble shooting guide, and have power
cycled the Apple TV. I've ensured that the Firewall allows
iTunes, iPhoto, and Bonjour (UDP 5353) through. I've tried
disabling the Apple firewall.
I have not yet power cycled my computer, because it is busy
running iPhoto, importing my photos. I have not yet removed
and reinstalled iTunes. Will do both of those after iPhoto
finishes importing.
Any other suggestions?
Thank you,
Chris ShakerGot it working!
Besides the Apple specified debugging items for ATV not showing up in iTunes,
I ran disk warrior on my disks, and repaired the permissions on my boot disk.
At some point, ATV running 2.0 showed up on iTunes. Then, it went away, and
would not come back.
I restored ATV to factory defaults, sw 1.1. This time, it did not show up in iTunes.
Found that at some point NetBarrier X5 decided that the ATV was a computer attempting a DOS attack on my Mac, and decided to drop all packets from the ATV. Fixed that, and got ATV 2.0 working with iTunes 7.6
Chris Shaker -
After updating to Firefox 3.6.10 this morning, Outlook 2007 can no longer open up links embedded in emails. Normally when you clicked a link it would open up Firefox and send you to the website, but when you click on any link it now says:
General failure. The URL was: [url here]
An error occurred in sending the command to the application.
I don't know what happened. I didn't change any other settings on the computer.
I am running Windows 7 64 Professional, MS Outlook 2007 with latest updates, and Firefox 3.6.10Please read this article to see if it helps:
https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=542907&comments_offset=20&comments_per_page=20&forumId=1
Also, you might try this first:
https://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
AFter updating to iTunes 11 my first generation Apple TV wasn't displayed any longer in iTunes. I had to relink it and after that it no longer automatically sysnc when I open iTunes, nor does it display its play lists. It still has its photos and play lists and it is linked up for streaming but does not sync as it used to do. Is it possible iTunes 11 doesn't support first generation Apple TV the same way it used to.?
Yes, the first generation model still works with iTunes 11. It sounds as though you have set it up as a streaming only library.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted. -
After updating to iOS7 the notes in my Contacts are no longer visible on my phone
After updating my iPhone 5 to iOS7 the notes field in my contacts no longer are visible on my phone while they still are on other devices.
What setting should I be changing where?Have you run system update recently? If so, and you're using icloud, I would have a look in System Preferences, icloud, and see if contacts is checked in there.
-
Need help. Before updating to latest software iOS6 the iPad had no issues connecting on our home router. After updating the iPad will not work. We have a mini iPad with same issue. But I have a iPhone 4S that I chose not to update to iOS6, still has iOS5. It connects no problem to router. Our computers have no issues connecting to router either. There is a software issue with iOS6.0.1 that will not allow certain routers to communicate. What can I do? Also, the mini iPad stated a newer version of software is out, version 6.0.2 which is supposed to correct the wifi problems. It has helped but still haven't connectivity issues. However, the iPad states software is up-to-date so we cannot update to 6.0.2 even through connecting to computer on iTunes. How can that be?
Try going to settings, reset , reset network settings.
-
How can I inclue a PDF page in a PDF arquive with many pages?
I have a PDF arquive with 107 pages and I want to inclue a new page to replace the page number 3.
How can I do this?You can't with Adobe Reader. You need Acrobat for that.
-
I have standart tab that under it there are lots of pages. Because of wwv_flow_tabs.tab_also_current_for _pages field is varchar2(255), I can not create new pages under that standart tab. Is there a solution for that situation. (for example making field varchar2(1000) ? )
My Htmldb is 1.5
regards
Metin AlikahyaHi Scott,
we have a 1.5.1.00.12 test instance. I have imported my application to that instance and when I tried to create new page under the tab again the same error occured. And because of being test instance I modified wwv_flow_tabs.tab_also_current_for_pages field to varchar2(4000). Everything well now. I can create new page under the tab which has many pages. I know that this is not a solution, but we have no change to upgrade 1.6 nowadays. I am waiting your comments.
regards,
Metin Alikahya -
After update to Firefox 8, the pause function on videos no longer works
I updated both my desktop and laptop to Firefox 8.
The laptop is a Toshiba and it's OS is Win 7 with Kapersky AV. The laptop has no problems.
When using Firefox on the desktop, which is a clone, with Win XP as the OS, and Norton AV, all up to date, the pause function on videos often does not work.
I have been able to play the same videos on this desktop computer using IE 8 and pause them with no problem.
I need to have the pause function work, because I am interrupted a lot, and it can take me 3 hrs. to watch a one hour video due to that.
Can anyone help? If not, I'll just have to use IE, though I much prefer Firefox. Thanks.The Statusbar is gone and the "lock" with it, as of Firefox 4.0. Security information about a web page is shown by the Site Identity Button.<br />
The old padlock could give users a false sense that a site is secure by not supplying all of the information about a site and only showed that there is a secure connection that didn't guarantee that you are connected to the right server. The Site Identity Button was introduced in Firefox 3.0 to show more complete "identity" information for HTTPS web pages. <br />
https://support.mozilla.com/en-US/kb/Site+Identity+Button
You can add a padlock to the location bar with the Padlock add-on- https://addons.mozilla.org/firefox/addon/padlock-icon -
Like the title says, after the most recent update of iTunes (11.1.2) on my MacBookPro (OS X 10.6.8) when I go to the store My Wish List is no longer populated with selections that I have made to consider purchasing, and under Purchased it shows that I have made no purchases, whcih isn't the case.
Is this a known issue, or am I doing something wrong?Okay, after reading the trouble shooting guide at https://help.apple.com/itunes/mac/11.1/#itns3023/ I noticed that my computer's clock was off by a day.
I reset it and now all is well. The wishlist and purchases have reappeared.
Weird. A security feature, I assume?
Maybe you are looking for
-
I just tried to buy Flowpaper from the app store but now my screen seems fr
I confirmed my credit card and billing details now I have a black shadow over the centre of the screen where the billing info panel was. and nothing seems to be happening. I have only bought this iPad last week it is an original one refurbished 16 gb
-
Named Anchors not working in Apple Mail
Hi... we have an HTML Email Newsletter. About 2 months ago the named anchors (links) from the top to different parts of the email stopped working right. For years, named anchors would simply go to the section of the email that you desired. The locati
-
First execution of query is always best than all the following
I have a static query that I execute in sql*plus in the same machine as the database and all the time, the first execution is faster than the following executions and it driving me crazy! Any help is appreciated... The database is Oracle Database 11g
-
Displayed Header Info Prints Differently
The header info. that's displayed on-screen, is different than what gets printed. How do that happen? Specifically, the displayed header info. shows; "To: My Name" but when printed that same line is changed to; "To: my email address". I need the head
-
How to set source in VideoPlayer via actionscript?
Hi, I'm trying to play video in spark.components.VideoPlayer by setting its source property. However, on playing the video doesn't play and comes out as garbled. Am I missing something here? Here is the source code- <?xml version="1.0" encoding="utf-